Simultaneous phase- and size-controlled synthesis of TiO(2) nanorods via non-hydrolytic sol-gel reaction of syringe pump delivered precursors

The simultaneous phase- and size-controlled synthesis of TiO(2) nanorods was achieved via the non-hydrolytic sol-gel reaction of continuously delivered two titanium precursors using two separate syringe pumps. As the injection rate was decreased, the length of the TiO(2) nanorods was increased and their crystalline phase was simultaneously transformed from anatase to rutile. When the reaction was performed by injecting titanium precursors contained in two separate syringes into a hot oleylamine surfactant solution with an injection rate of 30 mL/h, anatase TiO(2) nanorods with dimensions of 6 nm (thickness) x 50 nm (length) were produced. When the injection rate was decreased to 2.5 mL/h, star-shaped rutile TiO(2) nanorods with dimensions of 25 nm x 200 nm and a small fraction of rod-shaped anatase TiO(2) nanorods with dimensions of 9 nm x 100 nm were synthesized. Pure star-shaped rutile TiO(2) nanorods with dimensions of 25 nm x 450 nm were synthesized when the injection rate was further decreased to 1.25 mL/h. The simultaneous phase transformation and length elongation of the TiO(2) nanorods were achieved. Under optimized reaction conditions, as much as 3.5 g of TiO(2) nanorods were produced. The TiO(2) nanorods were used to produce dye-sensitized solar cells, and the photoconversion efficiency of the mixture composed of star-shaped rutile TiO(2) nanorods and a small fraction of anatase nanorods were comparable to that of Degussa P-25.     

Electrochemical synthesis of copper(II) oxide nanorods and their application in photocatalytic reactions

Journal of Solid State Electrochemistry - A new way of synthesizing nanoscale copper oxide particles is described in this work. Oxides of an intermediate metal, such as copper oxide, can be used as...     

Formate ester synthesis via reaction of 2-bromoethylamines with dimethylformamide

2-Bromoethylamines are converted to the corresponding formate esters in the presence of DMF. Both primary and secondary bromides are smoothly transformed to the esters in satisfactory yields. The reaction mechanism involves the formation of an aziridinium ion, which upon reaction with DMF forms a Vilsmeier-type intermediate that is further hydrolyzed to the corresponding formates. Participation of the β-amino group appears to control not only the regioselectivity but also the stereoselectivity of the reaction. Application of the reaction conditions to chiral substrates indicated that non-rearranged products are formed with retention of configuration at the reacting center.     

Large-scale synthesis of globotriose derivatives through recombinant E. coli

The carbohydrate chains decorating cell membranes and secreted proteins participate in a range of important biological processes. However, their ultimate significance and possible therapeutic potential have not been fully explored due to the lack of economical methods for their production. This study is an example of the use of a genetically engineered bacterial strain in the preparation of diverse oligosaccharides. Based on an ex vivo biosynthetic pathway, an artificial gene cluster was constructed by linking the genes of five associated enzymes on a plasmid vector. This plasmid was inserted into the E. coli NM522 strain to form globotriose-producing cells ('superbug' pLDR20-CKTUF). The specific strain was conveniently applied to the synthesis of globotriose trisaccharide and its derivatives, as potential neutralizers for Shiga toxin. This work demonstrates a novel and economical method for generating ligand diversity for carbohydrate drug development.     

Green synthesis and dye-sensitized solar cell application of rutile and anatase TiO2 nanorods

Journal of Solid State Electrochemistry - Nanorods (NRs) of TiO2 have biogenically been prepared, i.e., from the extract of Phellinus linteus mushroom. The presence of mixed anatase and...     

Highly stereoselective synthesis of (2E,4E)-dienamides and (2E,4E)-dienoates via a double elimination reaction

Highly stereoselective synthesis of (2E,4E)-dienamides and (2E,4E)-dienoates was achieved through a double elimination reaction of β-acetoxy sulfones.     

Hierarchical chlorine-doped rutile TiO2 spherical clusters of nanorods: Large-scale synthesis and high photocatalytic activity

In this study, we report the synthesis of hierarchical chlorine-doped rutile TiO₂ spherical clusters of nanorods photocatalyst on a large scale via a soft interface approach. This catalyst showed much higher photocatalytic activity than the famous commercial titania (Degussa P25) under visible light (λ>420 nm). The resulting sample was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), nitrogen adsorption, X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy, ¹H solid magic-angle spinning nuclear magnetic resonance (MAS-NMR) and photoluminescence spectroscopy. On the basis of characterization results, we found that the doping of chlorine resulted in red shift of absorption and higher surface acidity as well as crystal defects in the photocatalyst, which were the reasons for high photocatalytic activity of chlorine-doped TiO₂ under visible light (λ>420 nm). These hierarchical chlorine-doped rutile TiO₂ spherical clusters of nanorods are very attractive in the fields of environmental pollutants removal and solar cell because of their easy separation and high activity.     

Extension of the benzyl alcohol route to metal sulfides: "nonhydrolytic" thio sol-gel synthesis of ZnS and SnS2

Crystalline ZnS and SnS(2) particles were synthesized by a modified benzyl alcohol route using benzyl mercaptan as solvent.     

Low-temperature synthesis of soluble and processable organic-capped anatase TiO2 nanorods

We demonstrate the controlled growth of high aspect ratio anatase TiO2 nanorods by hydrolysis of titanium tetraisopropoxide (TTIP) in oleic acid (OLEA) as surfactant at a temperature as low as 80 degrees C. Chemical modification of TTIP by OLEA is proven to be a rational strategy to tune the reactivity of the precursor toward water. The most influential factors in shape control of the nanoparticles are investigated by simply manipulating their growth kinetics. The presence of tertiary amines or quaternary ammonium hydroxides as catalysts is essential to promote fast crystallization under mild conditions. The novelty of the present approach relies on the large-scale production of organic-capped TiO2 nanocrystals to which standard processing of colloidal nanocrystals, such as surface ligand exchange, can be applied for the first time. Concentrated colloidal titania dispersions can be prepared for a number of fundamental studies in homogeneous solutions and represent a new source of easily processable oxide material for many technological applications.     

Low-temperature synthesis and photocatalytic activity of TiO2 pillared montmorillonite

TiO2 pillared montmorillonite (PILM) was synthesized by hydrolyzing TiO2 sol into the interlayers of montmorillonite (MMT) at low temperatures. It is novel that all the as-prepared catalysts without calcination show a high photocatalytic activity for the degradation of acid red G (ARG) under UV light irradiation. The as-prepared powders were characterized by XRD, TEM, UV-vis diffuse reflectance spectroscopy, BET, and FT-IR. The X-ray diffraction analysis indicated that the (001) plane of MMT in the composites disappeared and that the layered structure became disordered, which also was confirmed by the TEM photographs. The UV absorption edge of the composites shows a red-shift in comparison to that of pure TiO2 particles. The obtained catalyst has the highest photocatalytic activity when the composite temperature is 70 degrees C, which could be attributed to the synergetic effects of the adsorbability of MMT and the photocatalytic property of TiO2 in it.     

Polyacrylamide gel synthesis and photocatalytic properties of TiO2 nanoparticles

In this study, a polyacrylamide gel route was introduced to synthesize TiO₂ nanoparticles. The influence of synthesis conditions on the properties of products was investigated. It is found that the samples prepared at the calcination temperature of 400 °C crystallize majorly in the anatase phase with a minor rutile phase. The second rutile phase has a dependence on the chelating agent, which is formed more readily when using acetic acid as the chelating agent. The introduction of acrylamide and glucose to the precursor solution shows the capability of improving the particle morphology, and the resulted particles are uniformly shaped like spheres. The photocatalytic activity of the prepared TiO₂ samples was evaluated by the degradation of acid orange 7 under 254 nm ultraviolet irradiation, revealing that they exhibit a good photocatalytic activity. Ethanol was used as a ^·OH scavenger to investigate its effect on the photocatalytic efficiency as well as the ^·OH radical yields. Based on the experimental results, ^·OH radical is suggested to be the dominant active species responsible for the dye degradation.     

1,2-Dibromoalkanes into alkynes by elimination reaction under DBU conditions and their application to total synthesis of sapinofuranone B

Treatment of 1,2-dibromoalkanes with DBU effected an elimination reaction, leading to the alkynes. Oxygen substitution at the C3 position plays a critical role to abstract protons by inductive effects. By the application of this protocol, a total synthesis of sapinofuranone B 4 was accomplished.     

One-step synthesis of nanocrystalline N-doped TiO2 powders and their photocatalytic activity under visible light irradiation

Nanocrystalline N-doped TiO₂ powders were successfully prepared by hydrothermal reaction for 2 h at low temperature (120 °C) and at an applied pressure of 3 MPa. The grain size of the powders (calculated by use of Scherrer’s method) ranged from 8.2 to 10.2 nm. The BET specific surface area ranged from 151.0 to 220.0 m²/g. A significant shift of the light absorption edge toward the visible light zone was observed in the UV–visible spectra. XPS results showed that nitrogen atoms were incorporated into the TiO₂ lattice. The photocatalytic activity of the synthesized N-doped TiO₂ powders was evaluated by measurement of photodegradation of methylene blue (MB) in aqueous solution under visible light irradiation. The amount of MB degraded increased with increasing illumination intensity.     

Hydrothermal synthesis of TiO2 nanorods: formation chemistry,growth mechanism,and tailoring of surface properties for photocatalytic activities

Titanium dioxide (TiO₂) is one of the best semiconductor photocatalysts with optical band gap of 3.2 eV. The optical band gap and photocatalytic properties could be further tuned by tailoring shape, size, composition, and morphology of the nanostructures. Hydrothermal synthesis methods have been applied to produce well-controlled nanostructured TiO₂ materials with different morphologies and improved optoelectronic properties. Among various morphologies, one-dimensional (1D) TiO₂ nanostructures are of great importance in the field of energy, environmental, and biomedical because of the directional transmission properties resulting from their 1D geometry. Particularly, TiO₂ nanorods (NRs) have gained special attention because of their densely packed structure, quantum confinement effect, high aspect ratio, and large specific surface area that could specially improve the directional charge transmission efficiency. This results in the effective photogenerated charge separation and light absorption, which are really important for potential applications of TiO₂-based materials for photocatalytic and other important applications. In this review, hydrothermal syntheses of TiO₂ NRs including the formation chemistry and the growth mechanism of NRs under different chemical environments and effects of various synthesis parameters (pH, reaction temperature, reaction time, precursors, solvents etc.) on morphology and optoelectronic properties have been discussed. Recent developments in the hydrothermal synthesis of TiO₂ NRs and tailoring of their surface properties through various modification strategies such as defect creation, doping, sensitization, surface coating, and heterojunction formation with various functional nanomaterials (plasmonic, oxide, quantum dots, graphene-based nanomaterials, etc.) have been reported to improve the photocatalytic activities. Furthermore, applications of TiO₂ NRs/tailored TiO₂ NRs as superior photocatalysts in degradation of organic pollutants and bacterial disinfection have been discussed with emphasis on mechanisms of action and recent advances in the fields.     

Facile synthesis and characterization of functionalized, monocrystalline rutile TiO2 nanorods

Functionalized, monocrystalline rutile TiO2 nanorods were prepared from TiCl4 in aqueous solution under acidic conditions in the presence of dopamine, followed by aging and hydrothermal treatment at 150 degrees C. The surface-bound organic ligand controls the morphology as well as the crystallinity and the phase selection of TiO2. The presence of monocrystalline rutile TiO2 was confirmed by X-ray powder diffraction and HRTEM investigations. The as-prepared nanorods are soluble in water at pH <3. The surface functionalization was analyzed by IR and 1H NMR, confirming the presence of dopamine on the surface. The surface amine groups can be tailored further with functional molecules such as dyes. Confocal laser scanning microscopy (CLSM) was used to characterize the binding of the fluorescent dye 4-chloro-7-nitrobenzofurazan (NBD) to the functionalized surface of the TiO2 nanorods.     

Preparation of mesoporous TiO2/CNT nanocomposites by synthesis of mesoporous titania via EISA and their photocatalytic degradation under visible light irradiation

Stabilized mesoporous TiO₂ was synthesized by evaporation induced self assembly (EISA) method and mechanically incorporated into single-walled carbon nanotubes (SWCNT) with different ratios. The physicochemical properties of the nanocomposites (mesoporous TiO₂/SWCNT) materials were investigated by Brunauer–Emmett–Teller (BET) measurement, X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray (EDX), photoluminescence (PL) and ultraviolet–visible (UV–Vis) spectroscopy measurements. The catalytic activity of mesoporous TiO₂ and nanocomposites were assessed by examining the degradation of rhodamine B as model aqueous solution under visible light. CNTs are facilitating the photocatalytic activity of mesoporous TiO₂ in the degradation of rhodamine B efficiently.     

Au nanorods decorated TiO2 nanobelts with enhanced full solar spectrum photocatalytic antibacterial activity and the sterilization file cabinet application

TiO₂ photocatalysts have been widely studied and applied for removing bacteria, but its antibacterial efficiency is limited to the ultraviolet (UV) range of the solar spectrum. In this work, we use the gold (Au) nanorods to enhance the visible and near-infrared (NIR) light absorption of TiO₂ NBs, a typical UV light photocatalyst, thus the enhancement of its full solar spectrum (UV, visible and NIR) photocatalytic antibacterial properties is achieved. Preliminary surface plasmon resonance (SPR) enhancement photocatalytic antibacterial mechanism is suggested. On one hand, transverse and longitudinal SPR of Au NRs is beneficial for visible and NIR light utilization. On the other hand, Au NRs combined with TiO₂ NBs to form the heterostructure, which can improve the photogenerated carrier separation and direct electron transfer increases the hot electron concentration while Au NRs as the electron channel can well restrain charge recombination, finally produces the high yield of radical oxygen species and exhibits a superior antibacterial efficiency. Furthermore, we design a sterilization file cabinet with Au NR/TiO₂ NB heterostructures as the photocatalytic coating plates. Our study reveals that Au NR/TiO₂ NB heterostructure is a potential candidate for sterilization of bacteria and archives protection.     

Nanofibrous polysulfone/TiO2 nanocomposites: Surface properties and their relation with E. coli adhesion

Solution blow spinning, SBS, was used to prepare fibrous films of thermoplastic nanocomposites with potential antibacterial properties based on polysulfone, PSF, filled with well dispersed TiO₂ nanoparticles. The PSF/TiO₂ nanocomposites were produced with different nanoparticles content up to 10% by weight. A wide characterization was carried out focusing on the morphology at the nanoscale, roughness, contact angles, and surface free energy. Cell adhesion was studied by inspection by scanning electron microscopy (SEM). A uniform dispersion of the nanofiller was achieved, with the nanoparticles evenly embedded in the polymer along the fibers when they were created during the blow spinning process. TiO₂ content influenced the topography of the films, most likely due to a direct effect on the solvent evaporation rate. The results obtained pointed out that an increase of the surface hydrophobicity as a result of the increased roughness induced by the presence of TiO₂ nanoparticles was the main contribution to the reduction of DH5α Escherichia coli cells adhesion. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1575–1584     

Template-assisted synthesis of rough Ag nanorods and their application for amperometric sensing of H2O2

Silver nanorods (Ag NRs) with rough sidewalls were successfully obtained via extremely simple template-assisted electrochemical deposition followed by selective dealloying. Ag–Zn NRs with an average diameter of ∼250 nm and the atomic ratio of about 1:1 were synthesized inside the nanochannels of a polycarbonate membrane. A chemical etching of Zn in a sulfuric acid solution led to the formation of NRs with smaller diameters, rough sidewalls, and much lower Zn content. Such kind of a material exhibited quite promising electrocatalytic properties toward reduction of hydrogen peroxide and can be used as an amperometric sensor for the detection and determination of H₂O₂.