Reactive landing of gas-phase ions as a tool for the fabrication of metal oxide surfaces for in situ phosphopeptide enrichment

Zirconium, titanium, and hafnium oxide-coated stainless steel surfaces are fabricated by reactive landing of gas-phase ions produced by electrospray ionization of group IVB metal alkoxides. The surfaces are used for in situ enrichment of phosphopeptides before analysis by matrix-assisted laser desorption ionization (MALDI) mass spectrometry. To evaluate this method we characterized ZrO₂ (zirconia) surfaces by (1) comparison with the other group IVB metal oxides of TiO₂ (titania) and HfO₂ (hafnia), (2) morphological characterization by SEM image analysis, and (3) dependence of phosphopeptide enrichment on the metal oxide layer thickness. Furthermore, we evaluated the necessity of the reactive landing process for the construction of useful metal oxide surfaces by preparing surfaces by electrospray deposition of Zr, Ti, and Hf alkoxides directly onto polished metal surfaces at atmospheric pressure. Although all three metal oxide surfaces evaluated were capable of phosphopeptide enrichment from complex peptide mixtures, zirconia performed better than hafnia or titania as a result of morphological characteristics illustrated by the SEM analysis. Metal oxide coatings that were fabricated by atmospheric pressure deposition were still capable of in situ phosphopeptide enrichment, although with inferior efficiency and surface durability. We show that zirconia surfaces prepared by reactive landing of gas-phase ions can be a useful tool for high throughput screening of novel phosphorylation sites and quantitation of phosphorylation kinetics.     

One-component bimetallic aluminium(salen)-based catalysts for cyclic carbonate synthesis and their immobilization

The development of one-component, bimetallic μ-oxoaluminium(salen) complexes as highly active catalysts for the synthesis of cyclic carbonates from terminal epoxides is described. The resulting homogeneous catalysts are used in batch reactions at room temperature and one atmosphere pressure. The catalysts have also been immobilized onto various support materials and used in either batch reactions or gas-phase flow reactions with ethylene and propylene oxides. Catalyst lifetime, deactivation and reactivation have been studied in both batch and flow reactions, and it has been shown that of the impurities present in power station flue gas, only sulfur trioxide deactivates the catalyst and at the concentrations of sulfur trioxide present in flue gas, this deactivation would require more than one years exposure of the catalyst to flue gas.     

Reactive landing of peptide ions on self-assembled monolayer surfaces: an alternative approach for covalent immobilization of peptides on surfaces

Soft landing of mass-selected peptide ions onto reactive self-assembled monolayer surfaces (SAMs) was performed using a newly constructed ion deposition apparatus. SAM surfaces before and after soft landing were characterized ex situ using time-of-flight secondary-ion mass spectrometry (TOF-SIMS) and infrared reflection-absorption spectroscopy (IRRAS). We demonstrate that reactive landing (RL) results in efficient covalent linking of lysine-containing peptides onto the SAM of N-hydroxysuccinimidyl ester-terminated alkylthiol on gold (NHS-SAM). Systematic studies of the factors that affect the efficiency of RL revealed that the reaction takes place upon collision and is promoted by the kinetic energy of the ion. The efficiency of RL is maximized at ca. 40 eV collision energy. At high collision energies the RL efficiency decreases because of the competition with scattering of ions off the surface. The reaction yield is independent of the charge state of the projectile ions, suggesting that peptide ions undergo efficient neutralization upon collision. Chemical and physical properties of the SAM surface are also important factors that affect the outcome of RL. The presence of chemically reactive functional groups on the SAM surface significantly improves the reaction efficiency. RL of mass- and energy-selected peptide ions on surfaces provides a highly specific approach for covalent immobilization of biological molecules onto SAM surfaces.     

Encapsulation of a chiral MnIII(salen) complex in ordered mesoporous silicas: an approach towards heterogenizing asymmetric epoxidation catalysts for non-functionalized alkenes

Two immobilized chiral Mn^III(salen) complexes covalently anchored on modified MCM-41 (50 Å) and SBA-15 (75 Å) were prepared using 3-aminopropyltriethoxysilane as a reactive surface modifier to afford comparable or even higher enantioselectivity than homogeneous catalysts for the enantioselective epoxidation of a series of smaller to bulkier alkenes. The catalyst immobilized in silica with larger pore diameters was found to be more active. Compared to homogeneous catalysts, the heterogenized catalysts are more stable and can be recycled four times with retention of enantioselectivity.     

Complexes of transition metals bonded to silica via β-diketonate groups — synthesis, structure, and catalytic activity

Transition metal complexes bonded to silica via silanes with β-diketonate groups can be used as packings for complexation gas chromatography or as immobilized homogenous metal complex catalysts. On basis of elemental analysis and the determination of surface area, possible structures of the complexes formed on the silica surface have been proposed. The possibility of using the immobilized complexes as catalysts has been indicated. Especially nickel complexes were taken into consideration. These immobilized complexes were used previously as packings for complexation gas chromatography.     

Preparation and Characterization of Chiral Oxazaborolidine Complex Immobilized SBA‐15 and Its Application in the Asymmetric Reduction of Prochiral Ketones

The immobilization of chiral oxazaborolidine complex in the well‐ordered mesochannels of SBA‐15 is demonstrated by a postsynthetic approach using 3‐aminopropyltriethoxysilane as a reactive surface modifier. The immobilized catalysts are characterized by various techniques, such as XRD, nitrogen adsorption, HRSEM, UV/Vis diffuse reflectance spectroscopy, and FTIR spectroscopy. The catalysts are used for the enantioselective reduction of aromatic prochiral ketones. The activity of the chiral oxazaborolidine complex immobilized SBA‐15 catalysts is also compared with that of the pure chiral oxazaborolidine complex, which is a homogeneous catalyst. It is found that the activity of the chiral complex immobilized SBA‐15 heterogeneous catalyst is comparable with that of the homogeneous catalyst.     

Catalytic Activity of Immobilized Transition Metal Complexes with Monoethanolamine in Carbon Tetrachloride Addition to Multiple Bonds

The rates of CCl₄ addition to octene-1 in the presence of monoethanolamine complexes with Mn, Cu, V, Co, and Ni ions immobilized on the surface of silica have been determined. The majority of catalysts exhibit an inverse dependence of relative catalytic activity on surface metal concentration. Changes in the total concentrations and ligand environments of paramagnetic ions in the course of reaction are studied by EPR spectroscopy for copper- and vanadyl-containing catalysts. It has been found that the activity of complexes correlates with the rate of reduction of a metal ion in the course of a catalytic reaction.     

Pd cluster nanowires as highly efficient catalysts for selective hydrogenation reactions

Palladium is a key catalyst invaluable to many industrial processes and fine-chemical synthesis. Although recent progress has allowed the synthesis of Pd nanoparticles with various shapes by using different techniques, the facile synthesis of Pd nanocrystals and turning them into a highly active, selective, and stable catalyst systems still remain challenging. Herein, we report the highly selective one-pot synthesis of monodisperse Pd cluster nanowires in aqueous solution; these consist of interconnected nanoparticles and may serve as highly active catalysts because of the enrichment of high index facets on the surface, including {443}, {331}, and {221} steps. For the first time, carbon nanotube and γ-Al(2)O(3) immobilized Pd cluster nanowires showed highly enhanced catalytic performance in the liquid-phase selective hydrogenation of cinnamaldehyde and gas-phase hydrogenation of 1,3butadiene relative to immobilized Pd icosahedra and nanocubes, as well as commercial Pd catalysts.     

Toward single-site, immobilized molecular catalysts: site-isolated Ti ethylene polymerization catalysts supported on porous silica

A new, general patterning methodology that may allow for the preparation of site-isolated organometallic catalysts on a silica surface is reported. The technique is demonstrated with Group 4 polymerization catalysts. The catalysts synthesized via the patterning method have up to a 10-fold increase in activity as compared to materials prepared by traditional techniques. In addition to supporting Group 4 polymerization catalysts, the patterned aminosilica is a possible support for other metal complexes, allowing for the synthesis of a wide array of immobilized single-site organometallic catalysts.     

Dendrimer-activated surfaces for high density and high activity protein chip applications

Highly functional Si and glass surfaces for protein immobilization have been prepared by a facile activation of native surface silanol groups. Poly(propyleneimine) dendrimers of generations 1-5 were immobilized onto the surface using a facile room-temperature coupling procedure that involved activation of native silanol groups of glass using 1,1'-carbonyldiimidazole under anhydrous conditions. The dendrimer-coated surfaces were used to immobilize proteins and were characterized with respect to surface loading and activity. A number of different chemical, physical, and biochemical techniques including contact angle measurement, ellipsometry, and fluorescence microscopy were used to characterize the resulting surfaces. Increasing the dendrimer generation past G-3 led to increased surface amine content, immobilized protein concentration, and the activity of immobilized alkaline phosphatase (used as a test system). Very high activity of the immobilized proteins in the case of higher generation (G-4 and G-5) dendrimers led us to conclude that such an approach has true potential for creating highly functional surfaces for protein chip applications.     

Preparation of highly active silica-supported Au catalysts for CO oxidation by a solution-based technique

Although Au catalysts can be readily prepared on titania via the deposition-precipitation (DP) method, the direct application of the method similar to the preparation of silica-supported Au catalysts only results in diminished success. This paper reports a novel, efficient method to synthesize highly active Au catalysts supported on mesoporous silica (SBA-15) through a gold cationic complex precursor [Au(en)2]3+ (en = ethylenediamine) via a wet chemical process. The gold cationic precursor was immobilized on negatively charged surfaces of silica by a unique DP method that makes use of the deprotonation reaction of ethylenediamine ligands. The resulting mesoporous catalyst has been demonstrated to be highly active for CO oxidation at room temperature and even below 273 K, the activity of which is much superior to that of silica-supported Au catalysts previously prepared by various solution techniques. The pH value of the gold precursor solution plays a key role in determining the catalytic activity through the regulation of [Au(en)2]3+ deprotonation reaction and the surface interaction of silica with the gold precursor. This mesoporous gold silica catalyst has also been shown to be highly resistant to sintering because of the stabilization of Au nanoparticles inside mesopores.     

Infrared multiphoton dissociation spectroscopy of gas-phase mass-selected hydrocarbon-Fe+ complexes

Infrared spectra in the mid-infrared region (800-1600 cm(-1)) of highly unsaturated Fe(+)-hydrocarbon complexes isolated in the gas phase are presented. These organometallic complexes were selectively prepared by ion-molecule reactions in a Fourier transform ion cycloton mass spectrometer (FTICR-MS). The infrared multiphoton dissociation (IRMPD) technique has been employed using the free electron laser facility CLIO (Orsay, France) to record the infrared spectra of the mass selected complexes. The experimental IRMPD spectra present the main features of the corresponding IR absorption spectra calculated ab initio. As predicted by these calculations, the experimental spectra of three selectively prepared isomers of Fe+(butene) present differences in the 800-1100 cm(-1) range. On the basis of the comparison with calculated IR spectra, the IRMPD spectrum of Fe(butadiene)(+) suggests that the ligand presents the s-trans isomeric form. This study further confirms the potentialities of IRMPD spectroscopy for the structural characterization of organometallic ionic highly reactive intermediates in the gas phase. In conjunction with soft ionization techniques such as electrospray, this opens the door to the gas-phase characterization of reactive intermediates associated with condensed phase catalysts.     

Redox chemistry in thin layers of organometallic complexes prepared using ion soft landing

Soft landing (SL) of mass-selected ions is used to transfer catalytically-active metal complexes complete with organic ligands from the gas phase onto an inert surface. This is part of an effort to prepare materials with defined active sites and thus achieve molecular design of surfaces in a highly controlled way. Solution-phase electrochemical studies have shown that V(IV)O(salen) reacts in the presence of acid to form V(V)O(salen)(+) and the deoxygenated V(III)(salen)(+) complex-a key intermediate in the four electron reduction of O(2) by vanadium-salen. In this work, the V(V)O(salen)(+) and [Ni(II)(salen) + H](+) complexes were generated by electrospray ionization and mass-selected before being deposited onto an inert fluorinated self-assembled monolayer (FSAM) surface on gold. A time dependence study after ion deposition showed loss of O from V(V)O(salen)(+) forming V(III)(salen)(+) over a four-day period, indicating a slow interfacial reduction process. Similar results were obtained when other protonated molecules were co-deposited with V(V)O(salen)(+) on the FSAM surface. In all these experiments oxidation of the V(III)(salen)(+) product occurred upon exposure to oxygen or to air. The cyclic regeneration of V(V)O(salen)(+) upon exposure to molecular oxygen and its subsequent reduction to V(III)(salen)(+) in vacuum completes the catalytic cycle of O(2) reduction by the immobilized vanadium-salen species. Moreover, our results represent the first evidence of formation of reactive organometallic complexes on substrates in the absence of solvent. Remarkably, deoxygenation of the oxo-vanadium complex, previously observed only in highly acidic non-aqueous solvents, occurs on the surface in the UHV environment using an acid which is deposited into the inert monolayer. This acid can be a protonated metal complex, e.g. [Ni(II)(salen) + H](+), or an organic acid such as protonated diaminododecane.     

限域纳米空间制备高效HCl氧化CuO-CeO_2催化剂

利用KIT-6的有序介孔作为限域空间制备了一系列的介孔Cu O-Ce O2催化剂.借助XRD、BET、Raman、ESEM、TEM和H2-TPR等手段对催化剂进行表征,并考察其在HCl氧化反应中的催化性能.结果表明:铜含量35%时,Cu O物种高度分散在催化剂的表面或者进入Ce O2晶格,催化剂具有高比表面积(140 m2·g-1)和较小的晶粒尺寸,其中25Cu O-Ce O2催化剂具备最高的表面氧空位浓度和最优的低温氧化还原性能,并在HCl氧化反应中表现出最佳的催化活性,O2/HCl=6,370℃时转化率达到90%.反应动力学结果表明,25Cu O-Ce O2中更多的高分散的Cu O促进了HCl在催化剂表面的吸附和活化,更高浓度的氧空位增强了氧分子的吸附和活化.     

SBA‐15@ABA-M (M = Cu,Ni and Pd): Three efficient,novel and green catalysts for oxidative coupling of thiols under mild reaction conditions

In the present study, oxidative coupling of thiols was carried out using immobilized Cu, Ni and Pd complexes on SBA-15 mesostructured as novel and green heterogeneous catalysts under mild reaction conditions. These supported complexes were characterized by FT-IR, XRD, TEM, TGA, EDX, ICP and BET techniques. These nanohybrid robust catalysts have outstanding advantages such as facile synthesis, use of green medium, high surface area, easy separation and workup, excellent reused for several consecutive cycles without noticeable change in its catalytic activity, and short reaction time.     

全氟烷基磺酸盐和全氟烷基磺酰亚胺盐的多相化催化研究

传统的Lewis酸催化剂在环境的压力下受到挑战,全氟烷基磺酸盐和全氟烷基磺酰亚胺盐作为均相、高效的Lewis酸催化剂在有机合成中受到人们的关注.为了简化分离操作,人们对全氟烷基磺酸盐和全氟烷基磺酰亚胺盐的多相化进行了研究,并已取得巨大进展.本文综述了全氟烷基磺酸盐和全氟烷基磺酰亚胺盐分别负载在有机载体、无机载体以及离子液体上的多相化催化最新研究进展,简要概括了其制备方法和催化活性,并对其催化应用前景进行了展望.     

Immobilization of the enzyme beta-lactamase on biotin-derivatized poly(L-lysine)-g-poly(ethylene glycol)-coated sensor chips: a study on oriented attachment and surface activity by enzyme kinetics and in situ optical sensing

Understanding the conformation, orientation, and specific activity of proteins bound to surfaces is crucial for the development and optimization of highly specific and sensitive biosensors. In this study, the very efficient enzyme beta-lactamase is used as a model protein. The wild-type form was genetically engineered by site-directed mutagenesis to introduce single cysteine residues on the surface of the enzyme. The cysteine thiol group is subsequently biotinylated with a dithiothreitol (DTT)-cleavable biotinylation reagent. beta-Lactamase is then immobilized site-specifically via the biotin group on neutral avidin-covered surfaces with the aim to control the orientation of the enzyme molecule at the surface and study its effect on enzymatic activity using Nitrocefin as the substrate. The DTT-cleavable spacer allows the release of the specifically bound enzyme from the surface. Immobilization of the enzyme is performed on a monolayer of the polycationic, biotinylated polymer PLL-g-PEG/PEG-biotin assembled on niobium oxide (Nb2O5) surfaces via neutral avidin as the docking site. Two different assembly protocols, the sequential adsorption of avidin and biotinylated beta-lactamase and the immobilization of preformed complexes of beta-lactamase and avidin, are compared in terms of immobilization efficiency. In situ optical waveguide lightmode spectroscopy and colorimetric analysis of enzymatic activity were used to distinguish between specific and unspecific enzyme adsorption, to sense quantitatively the amount of immobilized enzyme, and to determine Michaelis-Menten kinetics. All tested enzyme variants turned out to be active upon immobilization at the polymeric surface. However, the efficiency of immobilized enzymes relative to the soluble enzymes was reduced about sevenfold, mainly because of impaired substrate (Nitrocefin) diffusion or restricted accessibility of the active site. No significant effect of different enzyme orientations could be detected, probably because the enzymes were attached to the surface through long, flexible PEG chain linkers.     

Metal complex catalysts immobilized in polymer gels

A number of polymer gels have been prepared using tertiary ethylene‐propylene‐ethylidenenorbomene copolymer as a rubber base with grafted poly‐4‐vinylpyridine, polymethacrylic acid and polymethacrylamide ligand chains. The grafted copolymers were crosslinked and complexes of nickel, zirconium and titanium were immobilized in the formed crosslinked copolymers. After treatment with organoaluminium compounds the obtained catalysts demonstrate high catalytic activity in the reactions of dimerization of lower olefins. Structures of the complexes and the catalytic activity of the gel immobilized catalysts have been investigated.     

Electrostatic immobilisation of copper(I) and copper(II) bis(oxazolinyl)pyridine catalysts on silica: application to the synthesis of propargylamines via direct addition of terminal alkynes to imines

Copper(I) and copper(II) complexes of two bis(oxazolinyl)pyridines were immobilized on silica via electrostatic interactions. The catalytic activity of the immobilized catalysts in the direct addition of terminal alkynes to imines leading to propargylamines was investigated under a variety of reaction conditions. The performance of the immobilized catalysts compares very well with their homogeneous equivalents. When used in toluene, the catalysts could be recycled a number of times and maintained activity. This study is the first such report of the immobilization on silica in this manner of any bis(oxazolinyl)pyridine (pybox) complex.     

Catalytic oxidation activity of Pt3O4 surfaces and thin films

The catalytic oxidation activity of platinum particles in automobile catalysts is thought to originate from the presence of highly reactive superficial oxide phases which form under oxygen-rich reaction conditions. Here we study the thermodynamic stability of platinum oxide surfaces and thin films and their reactivities toward oxidation of carbon compounds by means of first-principles atomistic thermodynamics calculations and molecular dynamics simulations based on density functional theory. On the Pt(111) surface the most stable superficial oxide phase is found to be a thin layer of alpha-PtO2, which appears not to be reactive toward either methane dissociation or carbon monoxide oxidation. A PtO-like structure is most stable on the Pt(100) surface at oxygen coverages of one monolayer, while the formation of a coherent and stress-free Pt3O4 film is favored at higher coverages. Bulk Pt3O4 is found to be thermodynamically stable in a region around 900 K at atmospheric pressure. The computed net driving force for the dissociation of methane on the Pt3O4(100) surface is much larger than that on all other metallic and oxide surfaces investigated. Moreover, the enthalpy barrier for the adsorption of CO molecules on oxygen atoms of this surface is as low as 0.34 eV, and desorption of CO2 is observed to occur without any appreciable energy barrier in molecular dynamics simulations. These results, combined, indicate a high catalytic oxidation activity of Pt3O4 phases that can be relevant in the contexts of Pt-based automobile catalysts and gas sensors.