Preparation, characterization, and chemical stability of gold nanoparticles coated with mono-, bis-, and tris-chelating alkanethiols

A systematically varying series of monolayer-protected clusters (MPCs) was prepared by exposing small gold nanoparticles ( approximately 2 nm in diameter) to the following four adsorbates: n-octadecanethiol ( n - C18), 2-hexadecylpropane-1,3-dithiol ( C18C2), 2-hexadecyl-2-methylpropane-1,3-dithiol ( C18C3), and 1,1,1-tris(mercaptomethyl)heptadecane ( t - C18). The resultant MPCs were characterized by solubility studies, UV-vis spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared spectroscopy (FT-IR). All of the MPCs were soluble in common organic solvents; moreover, analysis by TEM showed that the core dimensions were unaffected by exposure to any of the adsorbates. Separate studies by XPS revealed that the sulfur atoms in all MPCs were predominantly bound to the surface of gold (i.e., approximately 85% or better). Analysis by FT-IR showed that MPCs functionalized with n - C18 possessed alkyl chains having the greatest conformational order in both the solid-state and dispersed in solution; in contrast, those generated from the other three adsorbates were more liquid-like with reduced conformational order (or crystallinity). The rate of nanoparticle decomposition induced by cyanide ions was monitored by UV-vis spectroscopy. While MPCs functionalized with n - C18 showed the fastest rate of decomposition, those functionalized with C18C3 were the most resistant to decomposition. Overall, the following trend in chemical stability was observed, C18C3 > C18C2 > t - C18 > n - C18.     

The Effect of Ligand Denticity in Size‐Selective Synthesis of Calix[n]arene‐Stabilized Gold Nanoparticles: A Multitechnique Approach

A series of gold nanoparticles (AuNPs) stabilized by monodentate, bidentate, and tridentate thiolate calix[n]arene ligands 1 – 3 was prepared by using the Brust–Schiffrin two‐phase direct synthesis and characterized with NMR spectroscopy, elemental analysis, transmission electron microscopy (TEM), and X‐ray photoelectron spectroscopy (XPS). The experimental data show that the particular multidentate structure of calix[n]arene derivatives 2 and 3 introduces a control element in the preparation of the gold nanoparticles that allows, in the particular experimental conditions here reported, to obtain very small (≈1 nm) AuNPs. These are the first experimental findings that identify a role of ligand “denticity” in the determination of the nuclearity of nanoparticles.     

Acridinedione-functionalized gold nanoparticles and model for the binding of 1,3-dithiol linked acridinedione on gold clusters

The design and synthesis of 1,3-dithiol linked acridinedione functionalized gold nanoparticles (ADDDT-GNP) is described. ADDDT-GNP was characterized by transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), UV-vis, steady-state and time-resolved fluorescence techniques. Conformational analysis of 1,3-dithiol ligands using density functional theory (DFT) reveals that they can cap on gold clusters through 1,2-capping mode, in which the two sulfur atoms of the dithiol bind covalently with two adjacent gold atoms on the surface of the cluster. The present study shows that three conformers of the ligand can cap in the 1,2-mode of capping. The triexponential fluorescence decay observed in the capped nanogold complex with fluorophore-labeled 1,3-dithiol may originate from the three conformers of the complex in the 1,2-capping mode.     

Interactions between water-soluble CdSe quantum dots and gold nanoparticles studied by UV-visible absorption spectroscopy.

The interaction of water-soluble CdSe quantum dots (QDs) with gold (Au) nanoparticles was investigated by ultraviolet visible absorption spectroscopy. The results showed that the aggregation of Au nanoparticles was induced by CdSe QDs. The influences of factors such as the size of Au nanoparticles, acidity, buffer concentration and the concentration ratio of the CdSe QDs to Au nanoparticles were each investigated. The comparison of two different particle sizes (16 and 25 nm) of Au nanoparticles that interact with CdSe QDs in the solution showed that the aggregation of small Au nanoparticles (16 nm) is easier than that of big Au nanoparticles (25 nm). At pH 7.0 phosphate buffer solution (0.02 M), the optimal molar ratio of CdSe:Au is about 3100:1 according to calculations.     

Cooperative Gold Nanoparticle Stabilization by Acetylenic Phosphaalkenes

Acetylenic phosphaalkenes (APAs) are used as a novel type of ligands for the stabilization of gold nanoparticles (AuNP). As demonstrated by a variety of experimental and analytical methods, both structural features of the APA, that is, the P?C as well as the C?C units are essential for NP stabilization. The presence of intact APAs on the AuNP is demonstrated by surface‐enhanced Raman spectroscopy (SERS), and first principle calculations indicate that bonding occurs most likely at defect sites on the Au surface. AuNP‐bound APAs are in chemical equilibrium with free APAs in solution, leading to a dynamic behavior that can be explored for facile place‐exchange reactions with other types of anchor groups such as thiols or more weakly binding phosphine ligands.     

Aurophilicity-based one-dimensional arrays of gold(I) phenylene-1,3- and -1,4-dithiolates

Phenylene-1,3-dithiol is converted into a trinuclear gold complex by treatment with 1 equiv of [[(Ph(3)P)Au](3)O](+)BF(4)(-). In the product, the phenylene unit bears one gold thiolate and one di(gold)sulfonium function. These components aggregate into one-dimensional arrays through head-to-tail aurophilic contacts between the two functions. In the association process, the Au[bond]S[bond]Au angle of the sulfonium group is opened up to accommodate the incoming gold atom between its metal centers. A similar mode of aggregation is found for the triply aurated biphenylene-4,4'-dithiol obtained using the tri(gold)oxonium salt with tri(p-tolyl)phosphine ligands. Probably for steric reasons, in this oligomerization process, the gold(I) thiolate unit is attached side-on to the digold sulfonium unit with retention of the small Au[bond]S[bond]Au angle. Under similar reaction conditions, and with the same molar ratio of the components, phenylene-1,4-dithiol is converted into the bis-sulfonium salt: 1,4-[[(p-Tol)(3)PAu](2)S](2)C(6)H(4)(BF(4))(2), the dications of which also associate into chains. Along the chains, the phenylene spacers alternate with tetranuclear gold clusters which arise from intimate aggregation of pairs of gold atoms. Together with previous findings, the present results show that gold thiolate (-SAuL) and digold sulfonium functions [-S(AuL)(2)(+)] in proper orientation at an arene unit (alpha-omega) can be considered as "soldering" points which can be used for joining up the molecular units into one-dimensional arrays solely through metal-metal contacts, which appear to be operative even against Coulomb repulsion between cations. The reaction of biphenylene-4,4'-dithiol with 2 equiv of sodium methoxide and [tri(c-hexyl)phosphine]gold chloride gives only neutral digold dithiolate complex 4 which is not associated owing to the steric bulk of the tri(c-hexyl)phosphine ligands.     

Synthesis of Highly Accessible and Reactive Sites in Gold Nanoparticles Using Bound Bis(Diphenylphosphine) Ligands

While bound organic ligands provide steric protection against aggregation for metallic nanoparticles in solution, they can block a large fraction of the surface atoms which are needed for binding in catalysis and sensing applications. In this work, highly accessible Au nanoparticles ligated with bis(diphenylphosphine) molecules are synthesized and characterized in solution. Characterization is performed using high angle annular dark field-scanning transmission electron microscopy (HAADF-STEM), ultraviolet-visible (UV-Vis) spectroscopy, and fluorescence chemisorption experiments. These synthesized nanoparticles are accessible to a 2-napthalenethiol (2-NT) probe molecule in solution. The highest 2-NT accessibility is observed when using 1,1-bis(diphenylphosphino)methane (dppm) ligand where 61 % of the total gold atoms are accessible. It is hypothesized that increasing the rigidity of the bis(diphenylphosphine) ligand increases the number of binding sites on the Au nanoparticles. These nanoparticles are catalytically active for resazurin reduction, and the resazurin reduction rate scales with the number of binding sites.     

Multidentate-protected colloidal gold nanocrystals: pH control of cooperative precipitation and surface layer shedding

Colloidal gold nanocrystals (AuNCs) with broad size tunability and unusual pH-sensitive properties have been synthesized using multidentate polymer ligands. Because they contain both carboxylic functional groups and sterically hindered aliphatic chains, the multidentate ligands can not only reduce gold precursors but also stabilize gold nanoclusters during nucleation and growth. The "as-synthesized" AuNCs are protected by an inner coordinating layer and an outer polymer layer and are soluble in water and polar solvents. When the solution pH is lowered by just 0.6 units (from 4.85 to 4.25), the particles undergo a dramatic cooperative transition from being soluble to insoluble, allowing rapid isolation, purification, and redispersion of the multidentate-protected AuNCs. A surprising finding is that when a portion of the surface carboxylate groups are neutralized by protonation, the particles irreversibly shed their outer polymer layer and become soluble in nonpolar organic solvents. Furthermore, the multidentate polymer coatings are permeable to small organic molecules, in contrast to the tightly packed self-assembled monolayers of alkanethiols on gold. These insights are important in regard to the design of "smart" imaging and therapeutic nanoparticles that are activated by small pH changes in the tumor interstitial space or endocytic organelles.     

Calix[4]arene‐Functionalised Silver Nanoparticles as Hosts for Pyridinium‐Loaded Gold Nanoparticles as Guests

A series of lipophilic gold nanoparticles (AuNPs) circa 5 nm in diameter and having a mixed organic layer consisting of 1‐dodecanethiol and 1‐(11‐mercaptoundecyl) pyridinium bromide was synthesised by reacting tetraoctylammonium bromide stabilised AuNPs in toluene with different mixtures of the two thiolate ligands. A bidentate ω‐alkylthiolate calix[4]arene derivative was instead used as a functional protecting layer on AgNPs of approximately 3 nm. The functionalised nanoparticles were characterised by transmission electron microscopy (TEM), and by UV/Vis and X‐ray photoelectron spectroscopy (XPS). Recognition of the pyridinium moieties loaded on the AuNPs by the calix[4]arene units immobilised on the AgNPs was demonstrated in solution of weakly polar solvents by UV/Vis titrations and DLS measurements. The extent of Au‐AgNPs aggregation, shown through the low‐energy shift of their surface plasmon bands (SPB), was strongly dependent on the loading of the pyridinium moieties present in the organic layer of the AuNPs. Extensive aggregation between dodecanethiol‐capped AuNPs and the Ag calix[4]arene‐functionalised NPs was also promoted by the action of a simple N‐octyl pyridinium difunctional supramolecular linker. This linker can interdigitate through its long fatty tail in the organic layer of the dodecanethiol‐capped AuNPs, and simultaneously interact through its pyridinium moiety with the calix[4]arene units at the surface of the modified AgNPs.     

Water-soluble nitric oxide-releasing gold nanoparticles

The synthesis and characterization of water-soluble nitric oxide (NO)-releasing monolayer-protected gold clusters (MPCs) are reported. Tiopronin-protected MPCs ( approximately 3 nm) were functionalized with amine ligands and subsequently exposed to 5 atm of NO to form diazeniumdiolate NO donors covalently bound to the gold MPC. Diazeniumdiolate formation conditions, NO-release, and nanoparticle stability were examined as a function of the structure of the protecting ligand, pH, and storage time. Despite their aqueous solubility, proton-initiated decomposition of the diazeniumdiolate-modified Tio-MPCs resulted in only modest NO-release (<0.023 micromol/mg) for short durations (<1.5 h). To increase the NO storage capacity of gold nanoparticles, polyamine-stabilized MPCs ( approximately 5 nm) were synthesized with significantly enhanced NO-release properties (0.386 micromol/mg) and durations (up to 16 h). Transmission electron microscopy, thermogravimetric analysis, nuclear magnetic resonance spectroscopy, elemental analysis, and UV-vis spectroscopy were used to characterize both nanoparticle systems before and after NO exposure. The MPCs represent the smallest water-soluble NO-release nanoparticles to date (3-5 nm).     

Facile synthesis of gold nanoparticles capped with an ammonium-based chiral ionic liquid crystal

Herein, we describe a facile synthesis of stable chiral ionic liquid crystal (ILC)-capped gold nanoparticles. A new ILC containing a chiral cholesterol moiety having a terminal triethylammonium group was synthesised which exhibited an enantiotropic lamellar mesophase. Stable, monodisperse citrate-stabilised gold nanoparticles having a size of ~60 nm were prepared and the citrate ligands on the gold nanoparticles were replaced with chiral ILC through a two-phase ligand exchange process. The resulting chiral ILC-stabilised particles were characterised using UV–visible (UV–Vis) and transmission electron microscopy (TEM) studies. Different from the citrate-stabilised nanoparticles, the ligand exchanged gold nanoparticles were dispersible in organic solvent and resulting dispersion was stable for more than observed period of 3 months. Furthermore, the chiral ILC-decorated gold nanoparticles were found to be well dispersible in a nematic host without any aggregation and induced a vertical alignment of the nematic director.     

高热稳定性二氧化硅包覆的Au25纳米簇的制备和催化应用

具有独特的电子和几何结构,原子精确控制的金纳米簇(<2 nm)成为一种新的具有广泛研究和应用前景的纳米催化剂.负载在氧化物表面的金纳米簇通常会在高于300°C时聚集或长大.人们已经通过多种方法成功制备了对于非原子精确控制的热稳定性的金纳米颗粒.主要包括利用金属与载体强相互作用,用可还原的金属氧化物来稳定金纳米颗粒;利用物理阻隔作用使用高比表面积的载体或制备核壳、纳米粒子镶嵌在载体中来稳定金纳米颗粒.对于原子精确控制的金纳米簇,由于其外边包覆着一层配体,将其负载到载体上时要保证配体不被破坏才能保证金纳米簇的结构完整性,负载后通常要除去配体才能使催化活性位曝露出来.目前,高热稳定性(>300°C)的金纳米簇的制备方法还较少.由于金与 SiO2相互作用较弱,将超小(<2 nm)的金纳米粒子包覆于其中非常困难.因此,本文首先制备了1.3 nm的含有硅酯键的巯基配体(3-巯丙基三甲氧基硅烷)保护的 Au25[SC3H6Si(OCH3)3]18,然后将其在刚成核的 SiO2表面与正硅酸四乙酯共水解,得到了既保留了 Au25的完整结构,又避免了 Au25之间相互水解的 Au25(SC3H6SiO3)18@SiO2纳米材料.漫反射固体紫外-可见光谱证明了 Au25在包覆完成后结构的完整性.透射电镜结果表明, Au25纳米簇焙烧至400°C未发生明显聚集长大.对硝基苯酚还原实验结果表明,不同温度处理后的 Au25@SiO2配体在200°C开始脱除,温度高于传统的负载型 Au25催化剂,表明 Au25是在 SiO2内部而不是在表面,从而使配体不易离去.400°C处理后的 Au25@SiO2对4-硝基苯酚还原表现出最高的反应活性,表明该纳米簇在400°C处理后没有发生明显聚集长大.     

Interaction of 2- and 4-mercaptopyridine with pentacyanoferrates and gold nanoparticles

2-Mercapto- and 4-mercaptopyridine (2- and 4MPy) react with the [Fe(CN)(5)(H(2)O)](3-) complex, forming the S-coordinated [Fe(CN)(5)(2MPy)](3-) and the N-coordinated [Fe(CN)(5)(4MPy)](3-) complexes. The rates of formation and dissociation of the [Fe(II)(CN)(5)(2MPy)](3-) complex were determined as k(f) = 294 dm(3) mol(-1) s(-1) and k(d) = 0.019 s(-1) by means of stopped-flow technique. The equilibrium constants for the iron(II) and -(III) species were calculated as K(f)(II) = 1.5 x 10(4) mol(-1) dm(3) and K(f)(III) = 1.3 x 10(6) mol(-1) dm(3), in comparison with 2.6 x 10(5) and 3.4 x 10(4) mol(-1) dm(3), respectively, for the 4MPy isomer. In the presence of gold nanoparticles, both 2- and 4MPy can displace the stabilizing citrate species, leading to substantial aggregation in aqueous solution, as deduced from the surface-enhanced Raman spectroscopy effect and from the decay of the 520-nm plasmon band accompanied by the rise of the characteristic exciton band at 650 nm. The [Fe(CN)(5)(4MPy)](3-) complex promotes strong stabilization of the gold nanoparticles by interacting through the S atom. On the other hand, the labile [Fe(CN)(5)(2MPy)](3-) complex induces aggregation, delivering the 2MPy ligand to the gold nanoparticles.     

Hyper Rayleigh scattering of protein-mediated gold nanoparticles aggregates

The second harmonic generation response from protein-mediated gold nanoparticles assemblies in solution has been studied by the technique of hyper Rayleigh scattering (HRS). It is found that the HRS intensity from biotinylated bovine serum albumin coated gold nanoparticles is enhanced when StreptAvidin is added into the solution. This increase in intensity is attributed to the aggregation of the gold nanoparticles through the binding of biotin and StreptAvidin. Comparison with photo-absorption spectroscopy indicates that the technique of HRS is a potential tool in detecting small levels of particle aggregation in liquid samples.     

Aqueous synthesis of alkanethiolate-protected Ag nanoparticles using Bunte salts

The one-pot synthesis of monolayer-protected metal nanoparticles derived from sodium S-dodecylthiosulfate (Bunte salt) in aqueous solution is described. Silver nanoparticles, which were produced by the borohydride reduction of silver nitrate in H2O, were stabilized by the adsorption of S-dodecylthiosulfate followed by the removal of the SO3- moiety. Temporary stabilization of silver sols by the adsorption of borohydride and borate prevented aggregation of silver nanoparticles in H2O. The syntheses of other metal nanoparticles, including gold, copper, and palladium particles in H2O, were less successful. Gold and copper particles were completely aggregated and precipitated out immediately after the addition of NaBH4, yielding only insoluble clusters. Stable and soluble palladium nanoparticle could be prepared, but the presence of Pd-thiolate complex was also observed. These nanoparticles were characterized using 1H NMR, UV-vis spectroscopy, FT-IR spectroscopy, and transmission electron microscopy.     

Alkynylisocyanide gold mesogens as precursors of gold nanoparticles

Gold nanoparticles (Au NPs) have been synthesized using simple thermolysis, whether from the mesophase or from toluene solutions, of mesogenic alkynyl-isocyanide gold complexes [Au(C≡C-C(6)H(4)-C(m)H(2m+1))(C≡N-C(6)H(4)-O-C(n)H(2n+1))]. The thermal decomposition from the mesophase is much slower than from solution and produces a more heterogeneous size distribution of the nanoparticles. Working in toluene solution, the size of nanoparticles can be modulated from ~2 to ~20 nm by tuning the chain lengths of the ligands present in the precursor. Different experimental conditions have been analyzed to reveal the processes governing the formation of the gold nanoparticles. Experiments on the effect of adding ligands or bubbling oxygen support that the thermal decomposition is a bimolecular process that starts by decoordination of the isocyanide ligand, producing an oxidative coupling of the akynyl group to [R-C≡C-C≡C-R] and reduction of gold(I) to gold(0) as nanoparticles. The nanoparticles obtained behave as a catalyst in the oxidation of isocyanide (CNR) to isocyanate (OCNR), which in turn cooperates to catalyze the decomposition.     

Loosely packed self-assembled monolayers on gold generated from 2-alkyl-2-methylpropane-1,3-dithiols

A series of 2-alkyl-2-methylpropane-1,3-dithiol derivatives with increasing alkyl chain lengths (i.e., CH3(CH2)mC(CH3)[CH2SH]2, where m = 7, 9, 11, 13, 15) were synthesized and used to generate self-assembled monolayers (SAMs) on gold. The resulting monolayers were analyzed by ellipsometry, contact angle goniometry, polarization modulation infrared reflection-absorption spectroscopy, and X-ray photoelectron spectroscopy. These data were compared with those obtained on SAMs on gold derived from normal alkanethiols (CH3(CH2)(m+2)SH) and 2-monoalkylpropane-1,3-dithiols (CH3(CH2)(m)CH[CH2SH]2) having the same number of carbon atoms in the primary chain. The results demonstrate that the 2-alkyl-2-methylpropane-1,3-dithiols generate conformationally disordered monolayer films in which the density of alkyl chains is less than those generated from normal alkanethiols and the 2-monoalkylpropane-1,3-dithiols.     

Colloidal stability evolution and completely reversible aggregation of gold nanoparticles functionalized with rationally designed free radical initiators

A series of molecular adsorbates having various chain lengths of terminal poly(ethylene glycol methyl ether) (PEG) moieties, thiol head groups, and intervening free radical initiator moieties was used to functionalize the surface of gold nanoparticles (AuNPs). The bulky PEG groups stabilized the functionalized AuNPs by providing steric hindrance against AuNP aggregation, such aggregation being a major problem in the modification and manipulation of metal nanoparticles. UV–vis spectroscopy was used to evaluate the stability of the adsorbate-functionalized AuNPs as a function of AuNP size (～15, 40, and 90 nm in diameter) and PEG chain length (Mn 350, 750, and 2,000). The longer PEG chains (Mn 750 and 2,000) afforded stability to AuNPs with smaller gold cores (～15 and 40 nm in diameter) for up to several days without any marked aggregation. In contrast, the adsorbate-functionalized AuNPs with the largest gold cores (～90 nm) were noticeably less stable than those with the smaller gold cores. Importantly, the adsorbate-functionalized AuNPs could be isolated in solvent-free “dried” form and readily dispersed in aqueous buffer solution (both acidic and basic) and various organic solvents (protic and aprotic). This isolation–redispersion (i.e., aggregation/deaggregation) process was completely reversible. The chemisorption of the PEG-terminated initiator on the surface of the AuNPs was verified by Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS). As a whole, the strategy reported here affords colloidally stable, free radical initiator-functionalized AuNPs and offers a promising general method for encapsulating metal nanoparticles within polymer shells.

Remarkable magneto-optical properties of europium selenide nanoparticles with wide energy gaps

The enhanced magneto-optical properties of nanoscaled lanthanide chalogenide semiconductors which have a wide energy gap were observed at around 500 nm for the first time. The nanoscaled semiconductors, Eu(1-x)Se nanoparticles 1 (cubic shapes) and 2 (spherical shapes), were synthesized by the thermal reduction of Eu(III) ion with organic ligands containing Se atoms. The resulting Eu(1-x)Se nanoparticles were characterized by X-ray diffraction, high-resolution transmission electron microscopy, energy dispersive X-ray spectroscopy, superconducting quantum interference devices magnetometer, and microwave induced plasma atomic emission spectroscopy measurements. The particle grain sizes of 1 and 2 were estimated to be 11 and 20 nm, respectively. The concentration-normalized Veldet constants (the magnitude of the Faraday effect) of Eu(1-x)Se nanoparticles were much larger than those of corresponding bulk EuSe and EuS nanoparticles.     

Aggregation stability of gold citrate hydrosol: Effect of ozone

Optical spectroscopy, dynamic light scattering, electrophoresis, and transmission electron microscopy are used to study the action of ozone on the stability of a gold hydrosol produced by the citrate method. It is shown that gold nanoparticles are not oxidized, even upon long-term ozonation. At short times of ozonation, changes that occur in the state of the sol are reversible. Nevertheless, even at this stage, organic ligands, which stabilize the hydrosol, are oxidized, while adsorbed ozone molecules can play the role of a stabilizer. At long ozonation times, when the oxidation of organic substances present in the system is actually completed, the colloidal solution loses its aggregation stability.