Photochemical sources of organic acids. 2. Formation of C5-C9 carboxylic acids from alkene ozonolysis under dry and humid conditions

The dependence of organic acid generation by alkene ozonolysis on relative humidity, thermalized Criegee intermediate scavengers, and alkene structure is investigated. Carboxylic acids generated from the ozonolysis of 1-hexene, 1-octene, 1-decene, trans-3-octene, and 1-methylcyclohexene were analyzed as trimethylsilyl (TMS) derivatives. Experiments were performed under dry (relative humidity (RH) < 1%) and humid (RH = 65%) conditions with cyclohexane or n-butyl ether as an OH scavenger. Pentanoic acid is produced from 1-hexene and trans-3-octene with yields 8.5 +/- 2.6 and 5.0 +/- 1.5% under dry conditions and 5.1 +/- 1.5 and 2.8 +/- 0.8% under humid conditions, respectively. Heptanoic acid yields from 1-octene are 8.3 +/- 2.5 and 4.4 +/- 1.3% under dry and humid conditions, respectively. Ozonolysis of 1-methylcyclohexene produced six C5-C7 multifunctional carboxylic acids, with a total yield of 7%. Several other acids and aldehydes were also monitored and quantified. An additional set of experiments with added stabilized Criegee intermediate (SCI) scavengers was performed for 1-octene ozonolysis under dry conditions. The results indicate that SCIs and their reaction with water are minor contributors to acid formation in the atmosphere and suggest that many of the acids are formed directly.     

Cobalt-catalyzed dimerization of alpha-olefins to give linear alpha-olefin products

[Cp*P(OMe)3CoCH2CH3]+ [BarF]-, generated by the addition of HBArF to Cp*P(OMe)3Co(ethene), catalyzes the oligomerization of 1-hexene to give dimers and trimers. When a deficit of the acid is used, linear alpha-olefin dimers are produced at the expense of trimeric products: e.g., 1-butene, 1-hexene, and 1-octene give 1-octene, 1-dodecene, and 1-hexadecene, respectively.     

A QM/MM study of the asymmetric dihydroxylation of terminal aliphatic n-alkenes with OsO4.(DHQD)2PYDZ: enantioselectivity as a function of chain length

The dihydroxylation of terminal aliphatic n-alkenes catalyzed by OsO4(DHQD)2PYDZ ((DHQD)2PYDZ=bis(dihydroquinidine)pyridazine) has been computationally studied by the hybrid QM/MM IMOMM(Becke3LYP:MM3) method. The cases of propene, 1-butene, 1-pentene, 1-hexene, 1-heptene, 1-octene, 1-nonene, and 1-decene have been considered. A systematic treatment for the large number of possible conformations of the longer chain alkenes has been defined and applied, leading to the selection of approximately 1700 conformations to be computed. The IMOMM calculations of the transition states formed between these conformations and the catalyst generate enantiomeric excesses that closely resemble the experimental data of related systems, specifically in the preference for the R isomer and in its dependence on the chain length of the substrate. The selectivity increases sharply with the elongation of the short-chain alkenes until a ceiling value is reached, with further elongations having little effect on the enantiomeric excess (ee). These results are rationalized through the partitioning of the total energy of selected conformers, a process that leads to the identification of the most relevant regions of the catalyst and the characterization of the interactions critical for selectivity.     

Rate constants for the gas-phase reaction of C5?C10 alkenes with ozone

The gas-phase reaction of ozone with C₅? C₁₀ alkenes(eight 1-alkenes, four 1,1-disubstituted alkenes, and cyclohexene) has been investigated at atmospheric pressure and ambient temperature (285–293 K). Cyclohexane was added to scavenge the hydroxyl radical, which forms as a product of the ozone-alkene reaction. The reaction rate constants, in units of 10^?18 cm³ molecule^?1 s^?1, are 9.6±1.6 for 1-pentene, 9.7±1.4 for 1-hexene, 9.4±0.4 for 1-heptene, 12.5±0.4 for 1-octene, 8.0±1.4 for 1-decene, 3.8±0.6 for 3-methyl-1-pentene, 7.3±0.7 for 4-methyl-1-pentene, 3.9±0.9 for 3,3-dimethyl-1-butene, 13.3±1.4 for 2-methyl-1-butene, 12.5±1.1 for 2-methyl-1-pentene, 10.0±0.3 for 2,3-dimethyl-1-butene, 13.7±0.9 for 2-ethyl-1-butene, and 84.6±1.0 for cyclohexene. Substituent effects on alkene reactivity are examined. Steric effect appear to be important for all 1,1-disubstituted alkenes as well as for those 1-alkenes that bear s-butyl and t-butyl groups. The results are briefly discussed with respect to the atomospheric persistence of the alkenes studied. © 1995 John Wiley & Sons, Inc.     

Determination of the adsorption model of alkenes and alcohols on sulfonic copolymer by inverse gas chromatography

The determination of a number of adsorption sites on sulfonated styrene-divinylbenzene copolymer for alkenes (propene, 1-butene, 1-pentene, 1-hexene, 1-heptene, isobutene, 2-methyl-1-butene, 2-methyl-2-butene, 2-methyl-1-pentene, 2-methyl-2-pentene and 2-methyl-2-hexene) and alcohols (methanol, ethanol and n-propanol, n-butanol, 2-butanol and tert-butanol) was performed by the saturation copolymer with vapors of adsorbate, by removing the excess of adsorbate from copolymer by blowing the inert gas through copolymer bed and by the desorption of adsorbed alcohol in the programmed increase of temperature. The adsorption measurements were performed on sulfonated ion-exchange resin (Amberlyst 15) with different concentrations of the acid group, which means with a varying number of adsorption sites. The following adsorption models for alkenes were suggested: the first in which one molecule of alkene is adsorbed by two sulfonic groups, for linear alcohols, the second in which one sulfonic group can adsorb one molecule of alcohol and for non-linear alcohols the third where one molecule of alcohol is adsorbed by two or more sulfonic groups.     

Copolymerization of propene with high-1-olefin using a MgCl2/TiCl4 catalyst

Copolymerization of propene and 1-olefins including 1-octene, 1-decene, 1-dodecene, 1-tetradecene, and 1-hexadecene were studied with the catalyst system MgCl₂/TiCl₄-Al(i-Bu)₃. It was found that the polymerization productivity and the consumption rate of propene are improved significantly in the presence of the comonomer. The total productivity of propene/1-olefin copolymerizations decreases as follows: 1-octene> 1-decene>1-dodecene>1-hexadecene>1-tetradecene. The reactivity ratios were estimated from the copolymerization results. ¹³C NMR was used to characterize the microstructures of propene/1-octene copolymer. Finally, the oxygen enrichment behavior of propene/1-octene copolymer was investigated.     

Rate constants for the gas-phase reaction of ozone with 1,2-disubstituted alkenes

The gas-phase reaction of ozone with eight 1,2-disubstituted alkenes has been investigated at ambient temperature (T = 286–296 K) and p = 1 atm. of air. The reaction rate constants, in units of 10⁻¹⁸ cm³ molecule⁻¹s⁻¹, are 144 ± 17 for cis-3-hexene, 157 ± 25 for trans-3-hexene, 89.8 ± 9.7 for cis-4-octene, 131 ± 15 for trans-4-octene, 114 ± 13 for cis-5-decene, ≥ 130 for trans-5-decene, 38.3 ± 5.0 for trans-2.5-dimethyl-3-hexene, and 40.3 ± 6.7 for trans-2.2-dimethyl-3-hexene. Substituent effects on alkene reactivity are examined. Cis-1,2-disubstituted alkenes are less reactive than the corresponding trans isomers. The 1,2-disubstituted alkenes that bear bulky substituents (substitution at the 3-carbon) are ca. 3 times less reactive than the corresponding n-alkyl substituted compounds. The atmospheric persistence of 1,2-disubstituted alkenes is briefly discussed. © 1996 John Wiley & Sons, Inc.     

Determination of reactivity ratios for ethylene/α-olefin copolymerization catalysed by the C2H4[Ind]2ZrCl2/methylaluminoxane system

The present study reports values of reactivity ratios for ethylene/1-hexene, ethylene/1-octene and ethylene/1-decene copolymerizations promoted by C₂H₄[Ind]₂ZrCl₂/MAO. The comonomer reactivities are markedly influenced by the number of carbon atoms of the α-olefin. The ethylene/1-decene copolymerization depends on the concentration of α-olefin in the feed.     

Carbanion addition to a metalated acetaldehyde. A new regiospecific alkene synthesis

The reaction of 2-[(dicarbonyl)(η⁵-cyclopentadienyl)iron]acetaldehyde with organolithium and Grignard reagents results in efficient addition to the aldehyde carbonyl. The intermediate alkoxides have been treated with tetrafluoroboric acid to give high yields of isolated η²-alkene complexes of the dicarbonyl(η⁵-cyclopentadienyl)iron cation. Using this procedure the following alkenes were produced as complexed ligands to iron in 50–90% yield: propene, 1-hexene, 3-methyl-1-pentene, 3,3-dimethyl-1-butene, 1,3-butadiene, and styrene.     

Borenium ion catalyzed hydroboration of alkenes with N-heterocyclic carbene-boranes

Treatment of alkenes such as 3-hexene, 3-octene, and 1-cyclohexyl-1-butene with the N-heterocyclic carbene (NHC)-derived borane 2 and catalytic HNTf(2) (Tf = trifluoromethanesulfonyl (CF(3)SO(2))) effects hydroboration at room temperature. With 3-hexene, surprisingly facile migration of the boron atom from C(3) of the hexyl group to C(2) was observed over a time scale of minutes to hours. Oxidative workup gave a mixture of alcohols containing 2-hexanol as the major product. A similar preference for the C(2) alcohol was observed after oxidative workup of the 3-octene and 1-cyclohexyl-1-butene hydroborations. NHC-borenium cations (or functional equivalents) are postulated as the species that accomplish the hydroborations, and the C(2) selective migrations are attributed to the four-center interconversion of borenium cations with cationic NHC-borane-olefin π-complexes.     

Adducts of phenoxathiin and thianthrene cation radicals with alkenes and cycloalkenes

Phenoxathiin cation radical perchlorate (PO.+ClO4(-)) added stereospecifically to cyclopentene, cyclohexene, cycloheptene, and 1,5-cyclooctadiene to give 1,2-bis(5-phenoxathiiniumyl)cycloalkane diperchlorates (4-7) in good yield. The diaxial configuration of the PO+ groups was confirmed with X-ray crystallography. Unlike additions of thianthrene cation radical perchlorate (Th.+ClO4(-)) to these cycloalkenes, no evidence for formation of monoadducts was found in the reactions of PO.+ClO4(-). This difference is discussed. Addition of Th.+ClO4(-) to five trans alkenes (2-butene, 2-pentene, 4-methyl-2-pentene, 3-octene, 5-decene) and four cis alkenes (2-pentene, 2-hexene, 2-heptene, 5-decene) gave in each case a mixture of mono- and bisadducts in which the configuration of the alkene was retained. Thus, cis alkenes gave erythro monoadducts and threo bisadducts, whereas trans alkenes gave threo monoadducts and erythro bisadducts. In these additions to alkenes, cis alkenes gave predominantly bisadducts, while trans alkenes (except for trans-2-butene) gave predominantly monoadducts. This difference is explained. 1,2-Bis(5-phenoxathiiniumyl)cycloalkanes (4-7) and 1,2-bis(5-thianthreniumyl)cycloalkanes underwent fast elimination reactions on activated alumina forming, respectively, 1-(5-phenoxathiiniumyl)cycloalkenes (8-11) and 1-(5-thianthreniumyl)cycloalkenes (12-16). Among adducts of Th.+ClO4(-) and alkenes, monoadducts underwent fast ring opening on alumina to give (5-thianthreniumyl)alkenes, while bisadducts underwent fast eliminations of H+ and thianthrene (Th) to give (5-thianthreniumyl)alkenes also. Ring opening of monoadducts was a stereospecific reaction in which the configuration of the original alkene was retained. Thus, erythro monoadducts (from cis alkenes) gave (E)-(5-thianthreniumyl)alkenes and threo monoadducts (from trans alkenes) gave (Z)-(5-thianthreniumyl)alkenes. Among bisadducts, elimination of a proton and Th occurred and was more complex, giving both (E)- and (Z)-(5-thianthreniumyl)alkenes. These results are explained. Configurations of adducts and (5-thianthreniumyl)alkenes were deduced with the aid of X-ray crystallography and (1)H and (13)C NMR spectroscopy. In the NMR spectra of (E)- and (Z)-(5-thianthreniumyl)alkenes, the alkenyl proton of Z isomers always appeared at a lower field (0.8-1.0 ppm) than that of E isomers.     

Structure formation of random isotactic copolymers of propylene and 1-hexene or 1-octene at rapid cooling

The effect of variation the cooling rate in a wide range between 10^?2 and 10³ K s^?1 on solidification the relaxed melt of random isotactic copolymers of propylene with low amount of 1-hexene or 1-octene has been studied. Emphasis has been placed on the structure formation at rapid cooling and an evaluation of the conditions required to permit crystallization, mesophase formation, or suppression of any ordering. The presence of low amount of either 1-hexene or 1-octene co-units in the propylene chain decreases drastically the critical cooling rate required for suppression of crystallization from about 150–200 K s^?1 in the homopolymer to about only 10 K s^?1 in the copolymers; increasing the cooling rate beyond these limits allowed mesophase formation or even generation of fully amorphous samples. The study of the kinetics of formation of specific structures is completed by a complementary analysis of the X-ray structure, morphology and superstructure of the ordered phase. The hindrance of non-isothermal crystallization and mesophase formation of random copolymers of propylene with 1-hexene or 1-octene is compared with that in propylene–1-butene copolymers; addition of only 2–3 mol% 1-hexene or 1-octene into the propylene chain leads to even larger hindrance of the ordering process than the addition of more than 10 mol% 1-butene.     

Heats of mixing of 2,2-dimethoxypropane and diethoxymethane with some 1-alkenes

The excess enthalpies of 2,2-dimethoxypropane + 1-hexene, + 1-heptene and + 1-octene, and of diethoxymethane + 1-hexene + 1-octene have been measured at 298.15 K. The values of H^E for all the systems are positive and increase with increasing chain length of the alkene. The results are analysed in term of the quasi-lattice theory of mixtures using the zeroth approximation.     

Addition of Tetrachloromethane to Alkenes,Catalyzed by Pt(II) Complexes

Platinum(II) complexes [dichlorobis(triphenylphosphine)platinum(II), dichlorobis(tri-m-tolylphosphine)platinum(II), dichloro(2,9-dimethyl-1,10-N, N′-phenanthroline)platinum(II), etc.] showed catalytic activity in addition of tetrachloromethane across the double bond in 1-hexene, 1-heptene, 1-octene, 1-decene, and cyclohexene. The stability of the platinum catalysts was evaluated by GLC, gas chromatography-mass spectrometry, and ³¹P NMR and IR spectroscopy; the kinetic relationships of the addition reactions were determined. A reaction mechanism involving formation of trichloromethyl radical was suggested. A correlation was revealed for the first time between the catalytic activity of platinum, palladium, and rhodium complexes and the capability of these complexes to generate hexachloroethane.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 5, 2005, pp. 778–782.Original Russian Text Copyright © 2005 by Zazybin, Khusnutdinova, Osipova, Solomonov.     

醚溶液中烯烃硼氢化反应机理的理论模拟

在B₃LYP/6-31G^*水平上以二甲醚(Me₂O)模拟四氢呋喃(THF)对烯烃在THF溶液中硼氢化反应的机理进行了研究.计算结果发现,烯烃通过类似SN₂的交换过程从醚与BH₃构成的配合物获得BH₃结合成π配合物中间体,这一交换是整个硼氢化反应的决速步骤.     

Effect of co-unit type in random propylene copolymers on the kinetics of mesophase formation and crystallization

Fast scanning chip calorimetry has been employed to study the effect of the type and concentration of co-units on the rate of mesophase formation and crystallization in random isotactic copolymers of propylene and 1-alkenes, including ethylene, 1-butene, 1-hexene, and 1-octene. The dependence of the rate of ordering on temperature of the propylene homopolymer shows two distinct maxima around 300 and 340–350 K which are related to mesophase formation and crystallization, respectively. Addition of 1-alkene co-units leads to a decrease of the maximum rate of both crystallization and mesophase formation. At comparable temperature and molar percentage of co-units in the propylene chain, ethylene, and 1-butene co-units cause less reduction of the maximum rate of ordering than 1-hexene or 1-octene co-units. The experimental observations are discussed in the context of possible incorporation of these chain defects into the ordered structures.     

Atom transfer radical addition (ATRA) catalyzed by copper complexes with tris[2-(dimethylamino)ethyl]amine (Me6TREN) ligand in the presence of free-radical diazo initiator AIBN

In this article, we focus on the evaluation of tris[2-(dimethylamino)ethyl]amine (Me(6)TREN) ligand in copper catalyzed ATRA in the presence of free-radical diazo initiator AIBN (2,2'-azobis(2-methylpropionitrile)). The addition of carbon tetrachloride to 1-hexene, 1-octene and cis-cyclooctene proceeded efficiently to yield 89, 85 and 85% of monoadduct, respectively, using the catalyst to alkene ratio of 1 : 2500. For alkenes that readily undergo free radical polymerization, such as methyl acrylate, catalyst loadings as high as 0.4 mol-% were required. Furthermore, modest yields of the monoadduct were obtained with less active alkyl halides (chloroform and bromoform) using 250 : 1 and 500 : 1 ratios of alkene to copper(II). Interestingly, the addition of carbon tetrachloride to cis-cyclooctene produced only 1-chloro-4-(trichloromethyl)-cyclooctene, while carbon tetrabromide yielded 1,2 and 1,4-regioisomers in 75 : 25 ratio. The activity of [Cu(II)(Me(6)TREN)X][X] (X = Br(-) and Cl(-)) complexes in ATRA in the presence of AIBN was additionally probed by adding excess free ligand, source of halide anions and triphenylphosphine. The results indicated that disproportionation is a likely cause for lower activity of Me(6)TREN as compared to TPMA (tris(2-pyridylmethyl)amine).     

Ab initio and microcalorimetric investigations of alkene adsorption on phosphotungstic acid

The adsorption of ethene, propene, 1-butene, trans-2-butene, and isobutene on phosphotungstic acid has been characterized by density functional theory (DFT) calculations and microcalorimetric experiments. The DFT-calculated chemisorption energies to form the corresponding alkoxides for ethene, propene, 1-butene, trans-2-butene, and isobutene were -86.8, -90.3, -102.6, -79.9, and -91.4 kJ mol(-1), respectively (for their most-favorable binding modes). The relative chemisorption energies to form the alkoxides are dictated by the strength of interaction of the acidic proton with the carbon atom of the double bond that becomes protonated. The activation barrier for chemisorption was greatest for alkenes with primary (1 degrees) carbenium-like transition states followed by secondary (2 degrees) and tertiary (3 degrees) transition states. The adsorption enthalpy established from microcalorimetric experiments with propene and isobutene was approximately -100 kJ mol(-1), which is close to the DFT-calculated values. Chemisorption of ethene on phosphotungstic acid during microcalorimetric experiments was minimal, presumably because of the large activation barrier associated with a 1 degrees carbenium-like transition state. The results from this study are compared with those in the literature for the adsorption of alkenes on zeolites, which have a similar adsorption mechanism. Our results suggest that alkene adsorption is stronger on phosphotungstic acid than on zeolites, as supported by the more exothermic chemisorption energies. Additionally, activation barriers for alkene adsorption are lower over phosphotungstic acid than over zeolites.     

Liquid-phase hydrogenation of 1-alkenes over Rh/AlPO4 and Rh/sepiolite catalysts

The catalytic activity of Rh (1 wt.%) catalysts supported on AlPO₄ and sepiolite has been studied in the liquid-phase hydrogenation of linear 1-alkenes. The reaction orders with respect to 1-alkene concentration are negative but are first order with respect to hydrogen, indicating that 1-alkene adsorbs very strongly on Rh sites and alkene and H₂, compete for adsorption sites on the surface. The initial hydrogenation rates increase in the order 1-hexene < 1-heptene < 1-octene, and furthermore, on going from 1-hexene to 1-octene the steric effects (through ΔS^≠) are activating, while electronic effects (from ΔH^≠) deactivate the reaction process. A cis-concerted mechanism taking place in a single step on a Rh site with three coordinative unsaturations which can simultaneously adsorb hydrogen and a π-bonded alkene is suggested.     

Ti(Ⅳ)/PNP/MAO体系催化乙烯齐聚的研究

合成了三种PNP配体,并与Ti(Ⅳ)作用形成催化剂,利用核磁共振氢谱、元素分析及质谱对配体及催化剂进行了结构表征。在助催化剂甲基铝氧烷(MAO)存在的条件下,催化乙烯齐聚。试验结果表明:钛(Ⅳ)剂催化活性最高可达2.58×105g/(molTi.h),α-烯烃选择性达80.72%。