Carbon nanofibers decorated with poly(furfuryl alcohol)-derived carbon nanoparticles and tetraethylorthosilicate-derived silica nanoparticles

The present paper introduces a novel method to functionalize nanofiber surfaces with carbon or silica nanoparticles by dip coating. This novel approach holds promise of significant benefits because dip coating of electrospun and carbonized nanofiber mats in poly(furfuryl alcohol) (abbreviated as PFA) is used to increase surface roughness by means of PFA-derived carbon nanoparticles produced at the fiber surface. Also, dip coating in tetraethylorthosilicate (abbreviated as TEOS) is shown to be an effective method for decorating carbon nanofibers with TEOS-derived silica nanoparticles at their surface. Furthermore, dip coating is an inexpensive technique which is easier to implement than the existing methods of nanofiber decoration with silica nanoparticles and results in a higher loading capacity. Carbon nanofiber mats with PFA- or TEOS-decorated surfaces hold promise of becoming the effective electrodes in fuel cells, Li-ion batteries and storage devices.     

Silica encapsulation and magnetic properties of FePt nanoparticles

Core-shell nanoparticles have emerged as an important class of functional nanostructures with potential applications in many diverse fields, especially in health sciences. We have used a modified aqueous sol-gel route for the synthesis of size-selective FePt@SiO2 core-shell nanoparticles. In this approach, oleic acid and olyel amine stabilized FePt nanoparticles are first encapsulated through an aminopropoxysilane (APS) monolayer and then subsequent condensation of triethoxysilane (TEOS) on FePt particle surface. These well-defined FePt@SiO2 core-shell nanoparticles with narrow size distribution become colloidal in aqueous media, and can thus be used as carrier fluid for biomolecular complexes. In comparison, the scarce hydrophilic nature of oleic acid monolayers on FePt particle surface yields an edgy partial coating of silica when only TEOS is applied for the surface modification. The synthesized core-shell nanoparticles were characterized by direct techniques of high resolution transmission electron microscopy (HRTEM), EDS and indirectly via UV-vis absorption and FTIR studies. The FePt@SiO2 nanoparticles exhibit essential characteristics of superparamagnetic behavior, as investigated by SQUID magnetometry. The blocking temperatures (T(B)) of FePt and FePt@SiO2 (135 and 80 K) were studied using zero field cooled (ZFC)/field cooled (FC) curves.     

Thin film formation of silica nanoparticle/lipid composite films at the fluid-fluid interface

We report a new and simple method for the formation of thin films at the interface between aqueous silica Ludox dispersions and lipid solutions in decane. The lipids used are stearic acid, stearyl amine, and stearyl alcohol alongside silica Ludox nanoparticle dispersions of varying pH. At basic pH thin films consisting of a mixture of stearic acid and silica nanoparticles precipitate at the interface. At acidic and neutral pH we were able to produce thin films consisting of stearyl amine and silica particles. The film growth was studied in situ with interfacial shear rheology. In addition to that, surface pressure isotherm and dynamic light scattering experiments were performed. The films all exhibit strong dynamic rheological moduli, rendering them an interesting material for applications such as capsule formation, surface coating, or as functional membranes.     

基于金纳米聚集体的核壳型SERS探针及其细胞内应用

利用金纳米粒子的聚集体作为表面增强拉曼散射（Surface enhanced Raman scattering,SERS）的增强基底,合成了一种二氧化硅包裹的核壳型SERS探针,并成功将该探针应用于活细胞的SERS光谱探测.实验中利用4-巯基苯甲酸（4-mercaptobenzoicacid,4MBA）作为拉曼标记物,...     

Silane-based poly(ethylene glycol) as a primer for surface modification of nonhydrolytically synthesized nanoparticles using the Stöber method

This paper describes the use of methoxy-poly(ethylene glycol) silane (MPEG-sil) as a linker molecule for the synthesis of silica-coated nanoparticles by the St?ber method. While short alkane chain-based siloxanes including (acryloxypropyl)trimethoxysilane and 3-methacryloxypropyl-trimethoxysilane are popular molecules used in surface modification, they are not efficient for the silica coating of nanoparticles synthesized from organic solvents containing long carbon chain carboxylic acids or amines as capping agents. Here, we report the utilization of MPEG-sil to bridge this gap. Our approach is based on a two-phase system, in which ligand exchange takes place in a hydrophobic environment and the surface modification with silica is conducted in an ethanol-water mixture. Our results show that this two-phased approach was effective to coat monodisperse Fe2O3 nanoparticles capped with oleic acid and Ag nanoparticles capped with oleylamine with uniform SiO2 shells. The process was also demonstrated for double-shell nanostructures to produce SiO2-coated Pt@Fe2O3 core-shell nanoparticles. The results described in this work represent a new approach for the surface modification with silica coating of monodisperse nanoparticles synthesized from nonhydrolytic solutions and can potentially have a broad ramification in the development of water-dispersible nanoparticles for biological applications.     

Effect of microstructure and surface roughness on the wettability of superhydrophobic sol–gel nanocomposite coatings

Sol–gel nanocomposite coatings were fabricated by spraying precursor mixtures containing hydrophobically modified silica (HMS) nanoparticles dispersed in sol–gel matrices prepared with acid-catalyzed tetraethoxysilane (TEOS), and methyltriethoxysilane (MTEOS). The hydrophobicity of the coatings increased with increase in the concentration of HMS nanoparticles. Superhydrophobic coatings with water contact angle (WCA) of 166° and roll-off angle <2° were obtained by optimizing the sol–gel processing parameters and the concentration of silica nanoparticles in the coating. FESEM studies have shown that surface has a micro-nano binary structure composed of microscale bumps and craters with protrusions of nanospheres. The properties of composite coatings fabricated by spin coating and spray coating methods were compared. It was found that the microstructure and the wettability were also dependent on the method of application of the coating.     

Fluorescence anisotropy in studies of solute interactions with covalently modified colloidal silica nanoparticles

Time-resolved anisotropy decays of a fluorescent cationic solute, rhodamine 6G (R6G), in Ludox sols were measured to characterize the extent of the ionic binding of the probe to silica particles after modification of the surface with neutral or cationic silane coupling agents. The anisotropy decays provided direct evidence for distribution of the dye between the aqueous solution (picosecond decay component) and silica particles (nanosecond decay component and residual anisotropy component, which were attributed to the wobbling motion of dye on the silica surface and to the ionically bound probe, respectively). The dye was strongly adsorbed to unmodified silica nanoparticles, to the extent that less than 1% of the dye was present in the surrounding aqueous solution. Significant decreases in the degree of probe adsorption were obtained upon covalent modification of the silica with neutral or cationic silanes, with up to 80% of the probe being present in the aqueous solution in cases where the surface was coated with (3-aminopropyl)triethoxysilane. The addition of such agents also altered the fractional distribution between the nanosecond decay component and the residual anisotropy component in favor of the nanosecond component, indicative of weaker interactions between the dye and the modified surface (i.e., more wobbling motion). The data clearly show the power of time-resolved fluorescence anisotropy decay measurements for probing the modification of silica surfaces and should prove useful in characterization of new chromatographic stationary phases.     

Polymeric coatings on silver nanoparticles hinder autoaggregation but enhance attachment to uncoated surfaces

The propensity of silver nanoparticles (AgNPs) having two different polymer coatings (poly(vinylpyrrolidone), PVP, or gum arabic, GA) to aggregate, or to deposit to a reference surface (silica), was explored as a basis for differentiating the effect of surface coating on the stability of nanoparticles in aggregation and in deposition. Surface polymeric coatings stabilize nanoparticles against aggregation as shown by either an increased critical coagulation concentration as for PVP-coated AgNPs (AgPVP) or the absence of observable aggregation even at a high ionic strength as for GA-coated AgNPs (AgGA). In experiments of AgNPs deposition in a silica porous medium, dissimilar surfaces favored deposition, such as the case where polymer coatings were present on the AgNPs but were absent on the porous medium. The increased affinity of the AgNPs for the porous medium in this case may be explained by a shifted contact frontier where electrical double layer interaction is weaker. When coating polymers were introduced to the porous medium and allowed to preadsorb to the silica surfaces, the attachment efficiencies for both the AgPVP and AgGA were reduced due to steric and electrosteric stabilization, respectively. The results suggest that polymeric coatings that are usually deemed as stabilizers (as they indeed are in the case of autoaggregation) might not necessarily stabilize nanoparticles against deposition unless the collector surfaces are also coated with polymer.     

Responsive colloidal systems: reversible aggregation and fabrication of superhydrophobic surfaces

We report on a method of fabricating stimuli-responsive core-shell nanoparticles using block copolymers covalently bound to a silica nanoparticle surface. We used the "grafting to" approach to graft amphiphilic block copolymer brushes of poly(styrene-b-2-vinylpyridine-b-ethylene oxide) and poly(styrene-b-4-vinylpyridine) onto silica nanoparticles with two different diameters: colloidal silica 200 nm in diameter and fumed silica 15 nm in diameter. We used the pH-responsive properties of the grafted brush to regulate the interactions between the particles, and between the particles and their environment. We show that this behavior can be applied for a reversible formation of particle aggregates, and can be used to tune and stabilize the secondary aggregates of particles of the appropriate size and morphology in an aqueous environment. The suspensions of the particles form a textured hydrophilic coating on various substrates upon casting and the evaporation of water. Heating above the polymer's glass transition temperature or treatment in acidic water result in back and forth switching between superhydrophobic and hydrophilic surfaces, respectively.     

Investigation of the effect of dual-size coatings on the hydrophobicity of cotton surface

A series of silica nanoparticles with two different length scales were introduced onto the cotton substrates to study the correlation between the surface structure and observed hydrophobicity. SiO₂ nanoparticles of 7, 12, 20, and 40 nm in size were individually functionalized using 3-aminopropyl triethoxysilane or 3-glycidoxypropyltrimethoxysilane. Amino functionalized silica nanoparticles were durably attached to the cotton surface that was previously treated with epichlorohydrin. By depositing an additional layer of epoxy modified silica nanoparticles, a dual-size hierarchical coating was obtained. It was found that the order of deposition of particles to develop dual-size coatings determines the surface roughness, hydrophobicity and the amount of silica loaded on the cotton substrate. Deposition of the bigger nanoparticles on top of smaller ones resulted in rougher surfaces, higher hydrophobicity and higher amount of silica loading onto the cotton surface. A strong correlation between the size ratio of deposited nanoparticle combinations and the amount of silica loading was observed. It was found that there is also a direct relationship between the surface roughness and the hydrophobicity of the samples generated. Based upon these correlations, it is now possible to tune surface roughness and subsequent wettability by controlling the sizes of the dual-type nanoparticle layers.     

Synthesis of hierarchical hollow silica microspheres containing surface nanoparticles employing the quasi-hard template of poly(4-vinylpyridine) microspheres

A facile method of preparing hierarchical hollow silica microspheres containing surface silica nanoparticles (HHSMs) through the sol-gel process of tetraethylorthosilicate employing a quasi-hard template of non-cross-linking poly(4-vinylpyridine) microspheres is proposed. The quasi-hard template contains the inherent catalyst of the basic pyridine group, and a few of the polymer chains can escape from the template matrix into the aqueous phase, which initiates the sol-gel process spontaneously both on the surface of the template used to prepare the hollow silica shell and in the aqueous phase to produce the surface silica nanoparticles. By tuning the weight ratio of the silica precursor to the quasi-hard template, HHSMs with a size of about 180 nm and a shell thickness ranging from 14 to 32 nm and surface silica nanoparticles ranging from 17 to 36 nm are produced initially through the deposition of surface silica nanoparticles onto the silica shell, followed by template removal either by calcination or solvent extraction. The synthesized HHSMs are characterized, and a possible mechanism for the synthesis of HHSMs is proposed.     

Encapsulation of silica nanoparticles by redox-initiated graft polymerization from the surface of silica nanoparticles

This study describes a facile and versatile method for preparing polymer-encapsulated silica particles by ‘grafting from’ polymerization initiated by a redox system comprising ceric ion (Ce⁴⁺) as an oxidant and an organic reductant immobilized on the surface of silica nanoparticles. The silica nanoparticles were firstly modified by 3-aminopropyltriethoxysilane, then reacted with poly(ethylene glycol) acrylate through the Michael addition reaction, so that hydroxyl-terminated poly(ethylene glycol) (PEG) were covalently attached onto the nanoparticle surface and worked as the reductant. Poly(methyl methacrylate) (PMMA), a common hydrophobic polymer, and poly(N-isopropylacrylamide) (PNIPAAm), a thermosensitive polymer, were successfully grafted onto the surface of silica nanoparticles by ‘grafting from’ polymerization initiated by the redox reaction of Ce⁴⁺ with PEG on the silica surface in acid aqueous solutions. The polymer-encapsulated silica nanoparticles (referred to as silica@PMMA and silica@PNIPAAm, respectively) were characterized by infrared spectroscopy, thermogravimetric analysis, and transmission electron microscopy. On the contrary, graft polymerization did not occur on bare silica nanoparticles. In addition, during polymerization, sediments were observed for PMMA and for PNIPAAm at a polymerization temperature above its low critical solution temperature (LCST). But the silica@PNIPAAm particles obtained at a polymerization temperature below the LCST can suspend stably in water throughout the polymerization process.     

二氧化硅@聚合物同轴纳米纤维

The preparation and formation mechamsm ot silica/polyvinylpyrrolidone(PAN) coaxial nanofibers were presented in this paper. The PVP-PAN composite nanofibers were obtained via an electrospinning technique, while SiO2 nanoparticles were prepared according to a Stoeher method. The measurements of water contact angle(WCA), the compared results of silica coating PVPPAN composite nanofibers with PAN nanofibers indicate that much PVP resided on the composite nanofiber surface, which resuks in the occurrence of SiO2@polymer coaxial nanofibers due to the formation of hydrogen bonding between silica and composite nanofibers and subsequent adsorption of silica on the fiber surface.     

Molecular dynamics simulation of nanocolloidal amorphous silica particles: Part I

Explicit molecular dynamics simulations were applied to a pair of amorphous silica nanoparticles in aqueous solution, with diameter of 4.4 nm and with four different background electrolyte concentrations, to extract the mean force acting between the two silica nanoparticles. Dependences of the interparticle forces on the separation and the background electrolyte concentration were demonstrated. The nature of the interaction of the counterions with charged silica surface sites (deprotonated silanols) was investigated. A "patchy" double layer of adsorbed sodium counterions was observed. Dependences of the interparticle potential of mean force on the separation and the background electrolyte concentration were demonstrated. Direct evidence of the solvation forces is presented in terms of changes of the water ordering at the surfaces of the isolated and double nanoparticles. The nature of the interaction of the counterions with charged silica surface sites (deprotonated silanols) was investigated in terms of quantifying the effects of the number of water molecules separately inside each pair of nanoparticles by defining an impermeability measure. A direct correlation was found between the impermeability (related to the silica surface "hairiness") and the disruption of water ordering. Differences in the impermeability between the two nanoparticles are attributed to differences in the calculated electric dipole moment.     

Hydrophobicity modification of woven cotton fabric by hydrophobic fumed silica coating

Water repellency of woven cotton fabric was achieved by coating with the aqueous dispersion containing organosilane agent (HDTMS) and fumed silica. The coating agents were applied using padding method and then followed by batching the coated fabric at the ambient temperature for 24 h to allow the condensation reaction between HDTMS silanol group and fumed silica silanol group, rendering silica particles hydrophobic. An ultrasonicator was employed to prepare the homogenous coating dispersion. The water repellency evaluated by water contact angle determination which showed the contact angle over 110° was obtained with low amount of applied HDTMS of 1 wt%. The effect of fumed silica addition on an increase in fiber surface roughness geometry showed the influential result in improving the water contact angle. From durability to washing test, the hydrophobic coatings evidenced from SEM and ATR/FTIR remained adhering to fiber surface, indicating the durability. After washing, the coating on the fabric with fumed silica addition appeared to be scatter particles which made a contribution to the higher contact angle value when compared to sheet-like layer coating in case of HDTMS coating alone.     

Effect of silica particles on stability of highly concentrated water-in-oil emulsions with non-ionic surfactant

Water-in-oil, high internal phase emulsion made of super-cooled aqueous solution containing a mixture of inorganic salts and stabilized with non-ionic surfactant (sorbitan monooleate) alone was investigated. It was not possible to produce a highly concentrated emulsion (with aqueous phase fraction = 94 wt %), stabilized with surface-treated silica, solely: we were able to form an emulsion with a maximal aqueous phase mass fraction of 85 wt % (emulsion inverts/breaks above this concentration). The inversion point is dependent on the silica particle concentration, presence of salt in the aqueous phase, and does not depend on the pH of the dispersed phase. All emulsions stabilized by the nanoparticles solely were unstable to shear. So, the rheological properties and stability of the emulsions containing super-cooled dispersed phase, with regards to crystallization, were determined for an emulsion stabilized by non-ionic surfactant only. The results were compared to the properties obtained for emulsions stabilized by surface treated (relatively hydrophobic) silica nanoparticles as a co-surfactant to sorbitan monooleate. The influence of the particle concentration, type of silica surface treatment, particle/surfactant ratio on emulsification and emulsion rheological properties was studied. The presence of the particles as a co-stabilizer increases the stability of all emulsions. Also, it was found that the particle/surfactant ratio is important since the most stable emulsions are those where particles dominate over the surfactant, when the surfactant’s role is to create bridging flocculation of the particles. The combination of the two types of hydrophobic silica particles as co-surfactants is: one that resides at the water/oil interface and provides a steric boundary and another that remains in the oil phase creating a 3D-network throughout the oil phase, which is even more beneficiary in terms of the emulsion stability.     

Fast and facile synthesis of silica coated silver nanoparticles by microwave irradiation

A novel, fast and facile microwave technique has been developed for preparing monodispersed silica coated silver (Ag@SiO(2)) nanoparticles. Without using any other surface coupling agents such as 3-aminopropyltrimethoxysilane (APS) or polymer such as polyvinyl pyrrolidone (PVP), Ag@SiO(2) nanoparticles could be easily prepared by microwave irradiation of a mixture of colloidal silver nanoparticles, tetraethoxysilane (TEOS) and catalyst for only 2 min. The thickness of silica shell could be conveniently controlled in the range of few nanometers (nm) to 80 nm by changing the concentration of TEOS. Transmission electron microscopy (TEM) and UV-visible spectroscopy were employed to characterize the morphology and optical properties of the prepared Ag@SiO(2) nanoparticles, respectively. The prepared Ag@SiO(2) nanoparticles exhibited a change in surface plasmon absorption depending on the silica thickness. Compared to the conventional techniques based on St?ber method, which need 4-24 h for silica coating of Ag nanoparticles, this new technique is capable of synthesizing monodispersed, uniform and single core containing Ag@SiO(2) nanoparticles within very short reaction time. In addition, straightforward surface functionalization of the prepared Ag@SiO(2) nanoparticles with desired functional groups was performed to make the particles useful for many applications. The components of surface functionalized nanoparticles were examined by Fourier transform infrared (FT-IR) spectroscopy, zeta potential measurements and X-ray photoelectron spectroscopy (XPS).     

Zwitteration as an alternative to PEGylation

A direct, head-to-head comparison of the efficacy of a zwitterionic versus a poly(ethylene glycol), PEG, coating in preventing protein adsorption to silica and aggregation of silica nanoparticles is presented. The same siloxane coupling chemistry was employed to yield surfaces with similar coverages of both types of ligand. Nanoparticle and planar surfaces were challenged with salt, serum, lysozyme, and serum albumin at 25 and 37 °C. While both types of surface modification are highly effective in preventing protein adsorption and nanoparticle aggregation, the zwitterion provided monolayer-type coverage with minimal thickness, whereas the PEG appeared to yield a more three-dimensional coating. The mechanism for adsorption resistance is thought to be based on preventing ion pairing between protein and surface charges, which releases counterions and water molecules, an entropic driving force enough to overcome a disfavored enthalpy of adsorption.     

Preparation of ultrathin coating layers using surface modified silica nanoparticles

Silica nanoparticles are used in various applications including catalysts, paints and coatings. To reach an optimal performance via stability and functionality, in most cases, the surface properties of the particles are altered using complex procedures. Here we describe a simple method for surface modification of silica nanoparticles (SNP) using sequential adsorption of oppositely charged components. First, the SNPs were made cationic by adsorption of a cationic polyelectrolyte. Poly(allylamine hydrochloride) (PAH) and polyethyleneimine (PEI) were chosen as polycations to investigate the difference between a linear and a branched polyelectrolyte. Next, the dispersion of cationic SNPs was combined with an anionic alkyl ketene dimer (AKD) emulsion. Using this approach cationic, hydrophobic silica particle dispersions were produced. Dynamic light scattering, contact angle measurements and atomic force microscopy (AFM) were used for analyzing the particle and coating layer properties. The chosen polyelectrolyte affected the structure of the dispersion. The layer build-up was studied in detail using a quartz crystal microbalance with dissipation monitoring (QCM-D). The adsorption and layer properties of the cationic polyelectrolytes adsorbed on silica as well as the affinity of AKD to this layer were explored. The application possibilities of the modified particle dispersions were demonstrated by preparing paper and silica surfaces with tailored properties, such as elevated surface hydrophobicity, using an ultrathin coating layer.