水杨醛亚胺钒（III）化合物催化乙烯聚合反应机理

钒系烯烃聚合催化剂在工业上有着不可替代的位置,它可用于制备高活性窄分布的聚合物、乙烯与α-烯烃共聚物和间规聚丙烯等。但由于实验手段难以确定钒催化剂活性物种的结构,进一步对催化机理的确认及催化剂结构的改进十分困难。本文运用密度泛函方法对水杨醛亚胺钒配合物催化乙烯聚合的活性物种结构进行了理论研究。对多种活性物种模型的比较研究结果表明,对此催化反应最有利的活性物种为中性双金属物种a1, a1结构中包含两个连接铝原子与钒中心的氯桥结构。研究同时表明,助催化剂AlEt2Cl的存在不仅加速了钒配合物前体的烷基化反应,同时其对活性物种a1结构中氯桥的形成至关重要。最后还研究了该催化体系的链终止反应机理。     

Substituted cyclopentadienylchromium(III) complexes containing neutral donor ligands. Synthesis, crystal structures and reactivity in ethylene polymerization

Lithium derivatives of substituted cyclopentadiene ligands reacted with CrCl₃(THF)₃ in THF solution to afford homodinuclear complexes of the type [{(η⁵-RCp)CrCl(μ-Cl) }₂] [R=SiMe₃ (1), CH₂C(Me)CH₂ (2)]. Complex 1 reacts with pyrazole (C₃H₄N₂) to yield the mononuclear half-sandwich complex [(η⁵-Me₃SiCp)CrCl₂(pyrazole)] (3). The similar complex [Cp*CrCl₂(pyrazole)] (4) was synthesised by reaction of [{Cp*CrCl(μ-Cl)}₂] with pyrazole. Complex 2 reacts with bidentate ligands to give binuclear complexes of the type [{(η⁵-CH₂C(Me)CH₂Cp)CrCl₂ }₂(μ-L-L)] [L-L=Ph₂PCH₂CH₂PPh₂ (5), trans-Ph₂P(O)CHCHP(O)Ph₂ (6)]. All complexes were structurally characterised by X-ray diffraction. After reaction with methylaluminoxane these complexes are active in the polymerization of ethylene. At 25 °C and 4 bar of ethylene, complex 3 yields polyethylene with a bimodal molecular weight distribution centred at 155,000 and 2000 g/mol. Complex 4 shows similar activity, yielding only the low molecular weight fraction. On the other hand, the binuclear complexes 5 and 6 under the same conditions were three times more active than mononuclear complexes. The melting point of the polymers indicates the formation of linear polyethylene.     

Quinolyl-functionalised Cp-chromium polymerisation catalysts: synthesis and crystal structures of alkylation products

The quinolyl-functionalised Cp-chromium(III) complexes 1 and 2, which serve as precursors for highly active olefin polymerisation catalysts, were alkylated with benzylmagnesium chloride. From these reactions, the new metal complexes 4, 5 and 6 were obtained and structurally characterised. The expected alkylchromium compound 4 is formed together with complex 5, where the nucleophile replaced a hydrogen atom at the quinoline substituent. The dinuclear complex 6 is formed by nucleophile addition, rearrangement and dimerisation.     

Ethylene polymerization and ethylene/hexene copolymerization by vanadium(III) complexes bearing bidentate phenoxy‐phosphine oxide ligands

A series of novel vanadium(III) complexes bearing bidentate phenoxy‐phosphine oxide [O,P=O] ligands, (2‐R₁‐4‐R₂‐6‐Ph₂P=O‐C₆H₂O)VCl₂(THF)₂ ( 2a : R₁ = R₂ = H; 2b : R₁ = F, R₂ = H; 2c : R₁ = tBu, R₂ = H; 2d : R₁ = Ph, R₂ = H; 2e : R₁ = R₂ = Me; 2f : R₁ = R₂ = tBu; 2g : R₁ = R₂ = CMe₂Ph) have been synthesized by adding 1 equiv of the ligand to VCl₃(THF)₃ dropwise in the presence of excess triethylamine. Under the same conditions, the adding of VCl₃(THF)₃ to 2.0 equiv of the ligand afforded vanadium(III) complexes bearing two [O,P=O] ligands ( 3c , 3f ). All the complexes were characterized by FTIR and mass spectra as well as elemental analysis. Structures of complexes 2c and 3c were further confirmed by X‐ray crystallographic analysis. On activation with Et₂AlCl and ethyl trichloroacetate, these complexes displayed high catalytic activities for ethylene polymerization (up to 26.4 kg PE/mmol_V·h·bar) even at high reaction temperature (70 °C) indicative of high thermal stability, and produced high molecular weight polymers with unimodal molecular weight distributions. Additionally, the complexes with optimized structure exhibited high catalytic activities for ethylene/1‐hexene copolymerization. Catalytic activity, comonomer incorporation, and polymer molecular weight can be controlled in a wide range via the variation of catalyst structure and the reaction parameters such as Al/V molar ratio, comonomer feed concentration, and reaction temperature. The monomer reactivity ratios r_E and r_H were determined according to ¹³C NMR spectra, which indicated these complexes preferred ethylene to 1‐hexene in the copolymerization. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5298–5306     

Ethylene polymerization and ethylene/hexene copolymerization with vanadium(III) catalysts bearing heteroatom‐containing salicylaldiminato ligands

A series of novel vanadium(III) complexes bearing heteroatom‐containing group‐substituted salicylaldiminato ligands [RN?CH(ArO)]VCl₂(THF)₂ (Ar = C₆H₄, R = C₃H₂NS, 2a ; C₇H₄NS, 2c ; C₇H₅N₂, 2d ; Ar = C₆H₂tBu₂ (2,4), R = C₃H₂NS, 2b ) have been synthesized and characterized. Structure of complex 2c was further confirmed by X‐ray crystallographic analysis. The complexes were investigated as the catalysts for ethylene polymerization in the presence of Et₂AlCl. Complexes 2a–d exhibited high catalytic activities (up to 22.8 kg polyethylene/mmol_V h bar), and affording polymer with unimodal molecular weight distributions at 25–70 °C in the first 5‐min polymerization, whereas produced bimodal molecular weight distribution polymers at 70 °C when polymerization time prolonged to 30 min. The catalyst structure plays an important role in controlling the molecular weight and molecular weight distribution of the resultant polymers produced in 30 min polymerization. In addition, ethylene/hexene copolymerizations with catalysts 2a–d were also explored in the presence of Et₂AlCl, which leads to the high molecular weight and unimodal distributions copolymers with high comonomer incorporation. Catalytic activity, comonomer incorporation, and polymer molecular weight can be controlled over a wide range by the variation of catalyst structure and the reaction parameters, such as comonomer feed concentration, polymerization time, and polymerization reaction temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3573–3582, 2009     

Theoretical study on the reaction mechanisms of ethylene with Cp2TiR, Cp2Ti(Cl)R, and Cp2Ti(Cl:AlH2Cl)R (R=H and CH3)

The potential energy surfaces for reactions of ethylene with Cp₂Ti⁺R, Cp₂Ti(Cl)R, and Cp₂Ti(Cl:AlH₂Cl)R (R=H and CH₃) were calculated by ab initio molecular orbital methods. These six reaction mechanisms were compared. Of the two possible reaction paths, attack of ethylene at Ti and the Cl and R ligands (path IN) and that from the opposite side of the Cl ligand (path OUT), the former is found to be more favorable, with a very low activation energy for reaction of ethylene with Cp₂Ti(Cl)H. For reaction of ethylene with Cp₂Ti(Cl)CH₃, the insertion transition states on both paths have almost the same energy barrier height above the reactants. For reaction of ethylene with Cp₂Ti(Cl:AlH₂Cl)R, the bond alternation between Ti–Cl and Cl–Al plays an important role in the mechanisms.     

Synthesis,structural characterization,and ethylene polymerization behavior of (arylimido)vanadium(V) complexes bearing tridentate Schiff base ligands

A series of novel (arylimido)vanadium(V) complexes bearing tridentate salicylaldiminato chelating ligands, V(N‐2,6‐Me₂C₆H₃)Cl₂[(O‐2‐^tBu‐4‐R‐C₆H₃)CH?ND] (R = H, D = 2‐CH₃O? C₆H₄ ( 2a ); 2‐CH₃S? C₆H₄ ( 2b ); 2‐Ph₂P? C₆H₄ ( 2c ); 8‐C₉H₆N (quinoline) ( 2d ); CH₂C₅H₄N ( 2e ); R = ^tBu, D = 2‐Ph₂P? C₆H₄ ( 2f )), were prepared from V(NAr)Cl₃ by reacting with 1.0 equiv of the ligands in the presence of triethylamine in tetrahydrofuran. These complexes were characterized by ¹H, ¹³C, ³¹P, and ⁵¹V NMR spectra and elemental analysis. The structures of 2c and 2f were further confirmed by X‐ray crystallographic analysis. These (arylimido)vanadium(V) complexes are effective catalyst precursors for ethylene polymerization in the presence of Et₂AlCl as a cocatalyst and ethyl trichloroacetate as a reactivating agent. Complex 2c with a ? PPh₂ group in the sidearm was found to exhibit an exceptional activity up to 133800 kg polyethylene/mol_V h for ethylene polymerization at 75 °C, which is one of the highest activities displayed by homogeneous vanadium(V) catalysts at high temperature. Moreover, high molecular weight polymers with unimodal molecular weight distribution can be obtained, indicating the single site behavior of these catalysts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2633‐2642     

Chromium imine and amine complexes as homogeneous catalysts for the trimerisation and polymerisation of ethylene

Cr(III) complexes of tridendate imine and amine ligands with N, P, O, S donor atoms 1 and 2 have been prepared and tested as catalysts in the oligomerisation and polymerisation of ethylene giving excellent selectivity towards 1-hexene and polymerisation to polyethylene when activated with cocatalysts. X-ray structure analyses of the precatalysts 1a-c, 1i, and 2b are investigated. The metal-ligand binding in 1a and 1b is nearly the same, which leads to similar catalytic activities of these precatalysts.     

Bis(pyrazolyl)pyridine vanadium(III) complexes as highly active ethylene polymerization catalysts

The synthesis, characterization and catalytic activity in ethylene polymerization of novel mononuclear vanadium complexes bearing N^∧N^∧N-tridentate (pyrazolyl-pyridine) ligands are described. With AlEtCl₂ as co-catalyst, complexes 1 and 2 produce single-site catalysts that polymerized ethylene affording high density polyethylene with fairly narrow molecular weight distribution.     

Spectroscopic investigation of heterogeneous Ziegler-Natta catalysts: Ti and Mg chloride tetrahydrofuranates, their interaction compound, and the role of the activator

X-ray powder diffraction (XRPD), Infrared, Raman, and UV/Vis spectroscopy have been used to investigate the structural, vibrational, and optical properties of Ti and Mg chloride tetrahydrofuranates as precursors of heterogeneous Ziegler-Natta catalysts for polyethylene production; as well as their interaction compound (pro-catalyst) and the final catalyst obtained after interaction with the AlR(3) activator. Although the structure of the precursors and of the pro-catalyst were well known, that of the catalyst (obtained by reaction of the pro-catalyst with AlR(3)) was not easily obtainable from XRPD data. IR and Raman spectroscopy provided important information on tetrahydrofuran (thf) coordination and on the ν(M-Cl) region; whereas UV/Vis spectroscopy gave the direct proof on both the formal oxidation state and the coordination environment of the active Ti sites. Those presented herein are among the first direct experimental data on the structure of the active Ti sites in Ziegler-Natta catalysts, and can be used to validate the many computational studies that have been increasing exponentially in the last few decades.     

Titanium and zirconium ketimide complexes: synthesis and ethylene polymerisation catalysis

The syntheses of ketimide titanium complexes of the type Ti(NC^tBu₂)₃X (X = Cl, Cp, Ind), Ti(NC^tBu₂)₄ and the zirconium complex CpZr(NC^tBu₂)₂Cl are described. When activated by MAO, all compounds are ethylene polymerisation catalysts. In the conditions studied, the most active catalyst is CpZr(NC^tBu₂)₂Cl, with an activity of 2.7 × 10⁵ kg/(molZr [E] h). Titanium complexes are less active by about two orders of magnitude. The polyethylene produced is linear, as determined by NMR spectroscopy. Molecular structures of Ti(NC^tBu₂)₃X (X = Cl, Cp, Ind) and Ti(NC^tBu₂)₄ were determined by X-ray single crystal diffraction.     

Transition-metal complexes of phenoxy-imine ligands modified with pendant imidazolium salts: Synthesis, characterisation and testing as ethylene polymerisation catalysts

Reaction between 3-((1R,2R)-2-{[1-(3,5-di-tert-butyl-2-hydroxy-phenyl)-meth-(E)-ylidene]-amino}-cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide (1a) or the derivative 3-((1R,2R)-2-{[1-(2-hydroxy-5-nitro-phenyl)-meth-(E)-ylidene]-amino}-cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide (1b) and metal halides MCl_x.yTHF (M = Zr, x = 4, y = 2; M = V, x = y = 3; M = Cr, x = y = 3), in THF, at −78 °C gives the metal complexes of general formula [MCl_x(κ²-N,O-OC₆H₂R¹R²C(H)N-C₆H₁₀-Im)₂][Br]₂ (where M = Zr, x = 2, R¹ = R² = ^tBu, 2; M = Zr, x = 2, R¹ = H, R² = NO₂, 3; M = V, x = 1, R¹ = R² = ^tBu, 4; M = Cr, x = 1, R¹ = R² = ^tBu, 5; M = Fe, x = 0, R¹ = R² = ^tBu, 6; Im = 1-isopropyl-4-phenyl-3H-imidazol-1-ium-3-yl). ¹H and ¹³C NMR spectroscopy of 2 and 3 indicate κ²-N,O-ligand coordination via the phenoxy-imine moiety with pendant imidazolium salt that is corroborated by a single crystal structure of 6. Compounds 2, 3, 4 and 5 were tested as precatalysts for ethylene polymerisation in the presence of methylaluminoxane (MAO) cocatalyst, showing low activity. Selected polymer samples were characterised by GPC showing multimodal molecular weight distributions.     

Chromium(III) and chromium(IV) bis(trimethylsilyl)amido complexes as ethylene polymerisation catalysts

Oxidation of Cr[N(SiMe(3))(2)](2)(THF)(2) with iodine and dicumyl peroxide results in tetrahedral Cr(iv) Cr[N(SiMe(3))(2)](2)I(2) and trigonal planar Cr(iii) Cr[N(SiMe(3))(2)](OCMe(2)Ph)(2), respectively; both complexes have been characterised by single-crystal X-ray diffraction, and both are active for ethylene polymerisation with alkylaluminium co-catalysts.     

Zirconocene dichloride complexes with a 1,2-naphthylidene bridge as catalysts for the polymerisation of ethylene and propylene

Ansa-zirconocene dichloride complexes containing a 9-fluorenyl group at the 1-position of naphthalene and a 2-indenyl 12, 1-indenyl 13, or cyclopentadienyl 14 group at the 2-position of the naphthalene were synthesised and characterised. The molecular structures of the complexes have been determined by single crystal X-ray diffraction studies. After activation with excess methylalumoxane (MAO), the complexes were used as homogeneous catalysts for the homopolymerisation of ethylene and propylene.     

Chromium(III) complexes bearing 2-benzoxazolyl-6-arylimino-pyridines: Synthesis and their ethylene reactivity

A series of chromium(III) complexes bearing 2-benzoxazolyl-6-aryliminopyridines was synthesized and characterized by IR spectroscopic and CHN analysis. The X-ray crystallographic analysis of complex Cr3 revealed a distorted octahedral geometry. When activated by Et₂AlCl, MAO or MMAO, these chromium complexes exhibited activities towards ethylene reactivity. High activities of ethylene oligomerization (up to 9.19 × 10⁶ g mol⁻¹ (Cr) h⁻¹) were observed in the catalytic system using MMAO as a cocatalyst, meanwhile good activities of ethylene polymerization were achieved (up to 5.20 × 10⁵ g mol⁻¹ (Cr) h⁻¹) by using MAO as a cocatalyst. Various reaction parameters were investigated in detail, and the steric and electronic effects of ligands were discussed.     

Synthesis,structural characterization,and olefin polymerization behavior of vanadium(III) complexes bearing bidentate phenoxy‐phosphine ligands

Vanadium(III) complexes bearing phenoxy‐phosphine ligands ( 2a–g ) (2‐R₁‐4‐R₂‐6‐PPh₂‐C₆H₂O)VCl₂(THF)₂ ( 2a : R₁ = R₂ = H; 2b : R₁ = F, R₂ = H; 2c : R₁ = Ph, R₂ = H; 2d : R₁ = tBu, R₂ = H; 2e : R₁ = R₂ = Me; 2f : R₁ = R₂ = tBu; 2g : R₁ = R₂ = CMe₂Ph) were prepared from VCl₃(THF)₃ by treating with 1.0 equiv of the ligand in tetrahydrofuran (THF) in the presence of excess triethylamine (TEA). The reaction of VCl₃(THF)₃ with 2.0 equiv of the ligand in THF in the presence of excess TEA afforded vanadium(III) complexes bearing two phenoxy‐phosphine ligands ( 3c–f ). These complexes were characterized by FTIR and mass spectrum as well as elemental analyses. Structures of 2f and 3c were further confirmed by X‐ray crystallographic analyses. Complexes 2a–g and 3c–f were employed as the catalysts for ethylene polymerization under various reaction conditions. On activation with Et₂AlCl, these complexes exhibited high catalytic activities (up to 41.3 kg PE/mmol_V·h·bar) even at high temperature (70°C), and produced high molecular weight polymer with unimodal molecular weight distributions, indicating the polymerization took place in a single‐site nature. Complexes 3c–f displayed better thermal stability than the corresponding complexes 2a–g under similar conditions. In addition, copolymerizations of ethylene and 1‐hexene with precatalysts 2a–g were also explored in the presence of Et₂AlCl. Catalytic activity, comonomer incorporation, and properties of the resultant polymers can be controlled over a wide range by tuning catalyst structures and reaction parameters.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Structure and reactivity of Ziegler-Natta catalyst intermediates

This paper provides a survey of our recent research on chemistry that occurs among components of Ziegler-Natta catalysts. Since the amount of information regarding this topic is enormous we have focused on alkoxo compounds, which are attracting more and more attention in polymer industry. In this concept article we discuss recent studies on the inherently very complex catalyst system that involve isolation of various solid polynuclear metal-containing species, determination of their structures by X-ray crystallography, and relating their structures to the activity in polymerization. The presented research may be useful in predicting trends for the development of new single-site catalysts as well as new co-catalysts.     

Synthesis,characterization and dynamic stereochemistry of thermochromic tris(dithiocarbamato)vanadium(III) complexes stereochemistry of thermochromic tris(dithiocarbamato)vanadium(III) complexes

The vanadium(III) complexes, V(S₂CNMe₂)₃ (1) and V(S₂CN ⁱ Pr₂)₃ (2) were prepared and characterized by analysis, IR, electronic and ¹H NMR spectra. The complexes show reversible thermochromic behaviour. MM2 calculations were used to simulate the molecular structure of 1. For 2, variable temperature ¹H NMR revealed hindered rotation about C–N bonds. The rotational energy barrier (38?kJ?mol^?1) was obtained by molecular mechanics force-field calculations.     

Novel vanadium(III) complexes with tridentate phenoxy‐phosphine [O,P(O),O] ligands: Synthesis,characterization, and catalytic behavior of ethylene polymerization and copolymerization with 10‐undecen‐1‐ol

A series of novel vanadium(III) complexes bearing tridentate phenoxy‐phosphine [O,P,O] ligands and phosphine oxide‐bridged bisphenolato [O,P?O,O] ligands, which differ in the steric and electronic properties, have been synthesized and characterized. These complexes were characterized by Fourier transform infrared spectroscopy (FTIR) and mass spectra as well as elemental analysis. Single‐crystal X‐ray diffraction revealed that complexes 3c and 4e adopt an octahedral geometry around the vanadium center. In the presence of Et₂AlCl as a cocatalyst, these complexes displayed high catalytic activities up to 22.8 kg PE/mmol_V.h.bar for ethylene polymerization, and produced high‐molecular‐weight polymers. Introducing additional oxygen atom on phosphorus atom of [O,P,O] ligands has resulted in significant changes on the aspect of steric/electronic effect, which has an impact on polymerization performance. 3c and 4c /Et₂AlCl catalytic systems were tolerant to elevated temperature (70 °C) and yielded unimodal polyethylenes, indicating the single‐site behavior of these catalysts. By pretreating with equimolar amounts of alkylaluminums, functional α‐olefin 10‐undecen‐1‐ol can be efficiently incorporated into polyethylene chains. 10‐Undecen‐1‐ol incorporation can easily reach 14.6 mol % under the mild conditions. Other reaction parameters that influenced the polymerization behavior, such as reaction temperature, Al/V (molar ratio), and comonomer concentration, are also examined in detail. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

A family of Group 4 metal alkoxo complexes with an M3(mu3-O) core relevant to Ziegler-Natta catalyst intermediates

Reactions of [Mg(thffo)(2)] (1) or [Ca(thffo)(2)] (2) with ZrCl(4) or HfCl(4) in a CH(2)Cl(2)/THF/CH(3)CN mixture give thermally stable neutral heterobimetallic tetranuclear complexes [M(3)M'(mu(x)-O)(mu,eta(2)-thffo)(6)(Cl)(6)] (thffo=tetrahydrofurfuroxide; M/M'/x: 3, Zr/Mg/3; 4, Hf/Mg/3; 5, Zr/Ca/4; 6, Hf/Ca/4) as colorless crystals in 75-82 % yield. X-ray diffraction studies show complexes 3-5 to contain oxo-bridged M(3) triangles that are capped by an alkaline earth metal-containing moiety to form species of C(3) symmetry. Reactions of ZrCl(4) and HfCl(4) with pure tetrahydrofurfuryl alcohol in EtOH and MeOH provide ionic complexes [M(3)(mu(3)-O)(mu,eta(2)-thffo)(3)(L)(3)(Cl)(6)]Cl (M/L: 8, Zr/EtOH; 9, Hf/EtOH; 10, Zr/MeOH) in 66-79 % yield. Complexes 8-10 consist of M(3) triangles that are analogous to those in 3-6 and possess similar overall symmetry, as shown by X-ray crystallography. Changes in the reaction conditions afforded the asymmetric neutral dimer [Zr(2)(mu-thffo)(2)(thffoH)(Cl)(6)] (7) and the homometallic [Zr(3)(mu(3)-O)(mu,eta(2)-thp)(3)(thf)(2)(Cl)(7)] (11).