Matrix modification for the direct determination of cadmium in urine by electrothermal atomic absorption spectrometry

Matrix modification with ammonium nitrate, ammonium dihydrogen-phosphate and Triton X-100 proved suitable. Optimization of the graphite furnace parameters allowed cadmium to be quantified at 800°C. The response was 0.1 μgl^-1 for 1% absorption, and the relative standard deviation for consecutive determinations of a urine containing 1.5 μg Cd l^-1 was 4%. Urinary cadmium levels of 0.4–1.8 μg l^-1 were found in five occupationally unexposed persons.     

Determination of arsenic in urine by atomic absorption spectrometry with electrothermal atomization

A cheap device which can be used to follow transient signals with a chart recorder is described.     

Flow injection hydride generation electrothermal atomic absorption spectrometric determination of toxicologically relevant arsenic in urine

Analytical procedure for the determination of toxicologically relevant arsenic (the sum of arsenite, arsenate, monomethylarsonate and dimethylarsinate) in urine by flow injection hydride generation and collection of generated inorganic and methylated hydrides on an integrated platform of a transverse-heated graphite atomizer for electrothermal atomic absorption spectrometric determination (ETAAS) is elaborated. Platforms are pre-treated with 2.7 μmol of zirconium and then with 0.10 μmol of iridium which serve both as an efficient hydride sequestration medium and permanent chemical modifier. Arsine, monomethylarsine and dimethylarsine are generated from diluted urine samples (10–25-fold) in the presence of 50 mmol L⁻¹ hydrochloric acid and 70 mmol L⁻¹ l-cysteine. Collection, pyrolysis and atomization temperatures are 450, 500, 2100 and 2150 °C, respectively. The characteristic mass, characteristic concentration and limit of detection (3σ) are 39 pg, 0.078 μg L⁻¹ and 0.038 μg L⁻¹ As, respectively. The limits of detection in urine are ca. 0.4 and 1 μg L⁻¹ with 10- and 25-fold dilutions. The sample throughput rate is 25 h⁻¹. Applications to several urine CRMs are given.     

A solid solution theory for matrix modification in electrothermal atomic absorption spectrometry

The kinetics of evaporation of the volatile analytes Pb and Cd in the presence of Ce(IV) introduced as the chemical modifier (NH₄)₂Ce(NO₃)₆ have been studied. The experimental results obtained are found to be in acceptable agreement with the regular solution model applied as a theoretical approach. Comparison with the results from previous investigation on the Pb/W analyte-modifier couple is made. An attempt is also made to explain some effects connected with the application of modifiers as described in the literature within the framework of the present model.     

Direct determination of cadmium in natural waters by electrothermal atomic absorption spectrometry without matrix modification

A procedure for the determination of cadmium in fresh, coastal and estuarine waters by polarized Zeeman-effect graphite-furnace atomic absorption spectrometry is validated by using lake waters and seawater. The limit of detection for freshwaters is <2 ng l^?1 cadmium. Undiluted seawater can be analyzed directly without the addition of matrix modifiers with the aid of a stabilized temperature platform. The instrument is calibrated with diluted NBS SRM 1643a (Trace Elements in Water). Analytical performance was tested extensively with fresh and brackish water samples and procedures were worked out to ensure that a high degree of accurately is achieved consistently.     

Polarized Zeeman effect atomic absorption spectrophotometry using a flame atomizer

A static magnetic field at 10 kG$\text{\$}\text{?}$was applied to a 10cm laminar flame produced by a premix type burner, and absorptions were observed for the polarized components of the radiation from a hollow cathode lamp. The dynamic range of the measurement was 10⁴–10⁵ for typical elements.The results showed that (1) the optimal conditions for double beam measurement and accurate correction of background absorption are achieved at the same time, (2) even if the flame conditions and the light intensity are changed, the baseline is not shifted, (3) the flame fluctuation noise and the lamp flicker noise are reduced, and (4) background absorption is corrected exactly at the same wavelength as the atomic absorption line.We thus concluded that the feasibility of flame atomic absorption spectrophotometry is much improved with this technique.     

Some observations on the use of matrix modifiers in the determination of aluminum by electrothermal atomic absorption spectrophotometry

Some evidence demonstrating that the use of matrix modifiers is necessary to obtain good calibration lines in the determination of aluminum by graphite furnace atomic absorption spectrophotometry is provided. It was found that the most sensitive results were obtained when Mg(NO₃)₂ was used instead of NH₄H₂PO₄.     

Determination of urinary arsenic by electrothermal atomic absorption spectrometry with the l'vov platform and matrix modification

Total arsenic can be determined rapidly and simply in urine by dilution with a matrix modifier containing nickel and magnesium nitrate in nitric acid. The background correction capability of Zeeman-effect electrothermal atomic absorption spectrometry effectively nullifies nonatomic absorption by urine concomitants. Accuracy and precision of the method were evaluated by the determination of total arsenic in the National Bureau of Standards' SRM 2670, Toxic Elements in Freeze-Dried Urine, and commercially available lyophilized urine material. Deviations of determined concentrations from expected values ranged from about 4 to 18 ng ml^?1 with standard deviations ranging from about 5 to 31 ng ml^?1.     

Direct determination of arsenic in sea water by electrothermal atomization atomic absorption spectrometry using D2 and Zeeman background correction

Arsenic in sea water was determined directly by graphite furnace atomic absorption spectrometry (GFAAS) using palladium nitrate as chemical modifier, at an optimum concentration of 15 mg l^–1. Deuterium and Zeeman effect background correction were compared and gave detection limits of 0.6 and 0.8 g l^–1, respectively. Precisions between 8 and 2%, for both correctors, were obtained with an injection volume of 40 l. The accuracy obtained with different reference materials: CRM-403 (1.461 g kg^–1), NASS-4 (1.26 ±0.09 gl^–1) and IAEA/W-4 (24–31 g l^–1) was studied for large injection volumes for both background correction systems. Interferences by chloride, sodium, potassium, calcium and silicon were removed by Zeeman correction, whereas deuterium correction was much less effective and was insufficiently accurate for sea water samples.     

Direct determination of arsenic in blood serum by electrothermal atomic absorption spectrometry

A method for the direct determination of arsenic in human blood serum is described. To suppress loss of arsenic by volatilization anal to remove chemical interferences in graphite-furnace atomic absorption spectrometry, the formation of involatile compounds with graphite, or with a matrix modifier is tested. With aqueous solutions, two sorts of interactions between graphite and arsenic are shown. But, in presence of serum, these interactions do not occur, Among 18 matrix modifiers tested, nickel gives the best sensitivity when used at high concentrations in the presence of Triton X-100. The proposed method allows direct arsenic determination, based on calibration with aqueous solutions. The method is applied to the serum of 20 normal subjects. The limit of detection is 0.4 μg l^?1 arsenic.     

Calibration of solid sampling Zeeman atomic absorption spectrophotometry by extrapolation to zero matrix

Summary A new method is described for the calibration of solid sampling Zeeman atomic absorption spectrophotometry, which can be applied independently of the use of certified reference materials. The specific signal (peak height divided by analyte mass or peak height divided by sample mass, for standard and sample, resp.) is plotted as a function of the analyte or the sample mass, and the line is extrapolated to zero mass. It is believed that this gives a specific signal not influenced by deviations from linearity of the calibration curve and free from matrix effects. The method yielded good results for Zn, Cd and Pb in several certified reference materials.Presented at the 5th International Colloquium on Solid Sampling with Atomic Spectroscopy, May 18–20, 1992; Geel, Belgium. Papers edited by R. F. M. Herber, Amsterdam     

Direct determination of chromium in human urine by electrothermal atomic absorption spectrometry

A rapid, accurate and direct method for urinary chromium determinations by graphite-furnace atomic absorption spectrometry is described. Few reagents are used and very little sample preparation and manipulation are required, greatly reducing the incidence of sample contamination. The method of standard additions is used to compensate for changes in sensitivity as the furnace tube ages, and for the widely different matrices encountered in urine samples. Furnace parameters must be carefully controlled. The detection limit is in the order of 0.03 ng Cr ml^-1. Agreement with independent methods is evaluated.     

Semi-permanent lutetium modifier for the determination of beryllium in urine by electrothermal atomic absorption spectrometry

The determination of beryllium using electrothermal atomic absorption spectrometry with deuterium background correction in the presence of various isomorphous metals and Mg(NO₃)₂ was studied. While, Eu, Ir and Sm had no effect on the transient signals, the addition of Lu and Mg(NO₃)₂ improved the sensitivity of the beryllium signal with respect to that obtained in the absence of modifier. Although, Mg(NO₃)₂ has improved the signal with respect to its sensitivity, it also increased the tail and the background (BG) signals, specially when urine samples are under study. Whereas, when Lu was used the analytical signal is virtually free of BG interference indicating that the urine matrix interference was almost eliminated. Besides, the addition of 6 μg of Lu ensured that the signals were effectively constant for five firings following the furnace program, which included: three drying, and the pyrolysis, atomization, cleaning and cooling steps. The effect of some components, likely to interfere in the accurate determination of beryllium (such as: Al, Ca, Cl, Co, Cr, Fe, Mg and Mn) were investigated. At the physiological levels, most of these elements had no effect, except in the case of chloride when Mg(NO₃)₂ was used as modifier. In this case, the tolerance limit was of 3000 mg Cl⁻ l⁻¹. The characteristic masses were 1.19, 0.45 and 0.48 pg, when integrated absorbance was measured for beryllium without the addition of any modifier and in the presence of Lu and Mg(NO₃)₂, respectively. The limits of detection (3σ) were 85, 19 and 58 fg, respectively. The accuracy and precision with the use of Lu and Mg(NO₃)₂ was tested for the direct determination of beryllium in urine samples. Quantification was performed with aqueous standards. The results obtained for the determination of beryllium in reference materials (Trace Elements in Urine), together with good recovery of spiked analyte, using either Lu or Mg(NO₃)₂ modification demonstrate the applicability of the procedure to the analysis of real samples. However, Lu provided the most accurate results. Also, the addition of Lu enhanced the precision of the measurements to levels of 1.8% relative standard deviation instead of 5.6 and 3.3% for the case of beryllium alone and with the addition of Mg(NO₃)₂.     

Overcoming interference from the alumina matrix on the determination of arsenic at 189 nanometers using electrothermal atomic absorption spectrometry

A method is described enabling to eliminate the spectral interference from alumina matrix onto As determination at the wavelength 189 nm by electrothermal atomic absorption spectrometry with deuterium background correction. Matrix modification was performed by the addition of ammonium fluoride to protect the formation of aluminium oxide implicated in causing spectral interference and to increase volatility of alumina matrix via the formation of AlF₃. Pre-treating of the pyrolytic graphite platform with a solution of rhodium and citric acid has enabled to stabilize the analyte up to temperature of 1300 °C at which most of AlF₃ could be removed from the graphite furnace. The application of 2 μg of Rh + 20 μg of citric acid + 200 μg of NH₄F has enabled an accurate and interference-free determination of As up to 40 μg of Al in the form of AlCl₃ as verified by analytical recoveries study and resulted in characteristic mass and LOD value in the original sample 15 pg and 50 ng g⁻¹, respectively (10-μL aliquots of sample).     

Determination of physiological noble metals in human urine using liquid-liquid extraction and Zeeman electrothermal atomic absorption spectrometry

An extremely sensitive, reliable and simple procedure is described for the determination of physiological palladium, platinum and gold in human urine. The urine samples were adjusted to pH 4 (Pd, Au) or pH 5 (Pt), followed by conversion of the analytes to their pyrrolidinedithiocarbamate complexes. These complexes were separated from the matrix by liquid-liquid extraction into 4-methyl-2-pentanone resulting in a 25-fold enrichment. Determination was by electrothermal atomic absorption spectrometry (ET-AAS) using longitudinal inverse alternating current Zeeman-effect background correction. The limits of detection calculated from three standard deviations of the blank values were 20 ng l⁻¹ for Pd and Au and 70 ng l⁻¹ Pt. Within-day precision (n = 10, 5 μg l⁻¹) ranged 5.2%–7.7%. The procedure is successfully applied to determine urinary palladium, platinum and gold in nine unexposed persons. Palladium levels in urine ranged < 20–80 ng l⁻¹ (arithmetical MEAN=38.7 ng l⁻¹), while gold levels ranged < 20–130 ng l⁻¹ (36.0 ng l⁻¹). Physiological platinum levels in urine were all < 70 ng l⁻¹. The accuracy of the procedure was checked by analyzing a series of urine samples by a second independent method (magnetic sector field inductively-coupled plasma-mass spectrometry) in combination with UV photolysis.     

The determination of bismuth in serum and urine by electrothermal atomic absorption spectrometry

A method for the determination of bismuth in serum and urine is presented. The method includes 1 + 1 dilution of the sample with 1 mM EDTA followed by charring in a graphite furnace under an oxygen atmosphere. The use of oxygen results in the formation of more homogeneous bismuth salts (probably bismuth oxides) during charring, and more efficient burning of the protein and organic components of the sample matrix. The procedure formulated is a standard additions method and is verified for serum and urine samples. The method reduces matrix interferences, gives a detection limit of 0.05 μg l^-1, and has a relative standard deviation of less than 5% for bismuth in the reference range of 2.6–6.0 μg l^-1. The method displays a recovery accuracy of 91, 96, and 100% for urine, serum, and aqueous samples, respectively.     

Direct determination of lead in human blood and selenium, cadmium, copper, zinc in serum by electrothermal atomic absorption spectrophotometry using Zeeman effect background correction

Summary The procedure for the direct determination of lead in human blood and selenium, cadmium, copper and zinc from human blood serum with micro quantities of the samples are described using electrothermal atomic absorption spectrophotometry with L'vov platform and Zeeman correction. No predigestion or extraction procedures are required. The analyses are performed by simple dilution of the specimen with Triton X-100 and/or proper matrix modifier. The method of standard additions and peak area measurement are used for quantitation. L'vov platforms have been used for all elements except cooper. Use of micro quantity of the sample, better reproducibility, low detection limit and possibility of analyzing a large number of samples per day made this technique particularly suitable as routine analytical procedure in clinical laboratory. The procedures for determination of the metal ions are applied on sixty normal persons and twenty-two cardiomyopathy patients to find any correlation.     

Direct determination of lead in blood by electrothermal atomic absorption spectrometry with L'vov platform and matrix modification

An electrothermal atomic-absorption procedure with the L'vov platform and a simple five- or ten-fold sample dilution with a matrix-modifier solution containing diammonium hydrogenphosphate, Triton X-100 and nitric acid, is described for the direct determination of relatively low levels of lead in heparinized blood. The graphite-furnace parameters and matrix-modifier composition are optimized. Sensitivity, imprecision, accuracy and detection limit are reported. Results obtained by standard addition for ten human blood samples (30–400 μg l^?1 lead) were confirmed by an extraction/flame atomic-absorption reference method. Differences in mean lead values ranged from 2 to 31 μg l^?1 with 5.1% mean relative difference. The mean relative standard deviations for consecutive and between-day determinations were 4.6 and 9%, respectively. Accuracy was verified by analyzing six bovine-blood standards certified for lead in the range 70–1100 μg l^?1; deviations of found concentrations from expected values ranged from 0 to 44 μg l^?1 with 4.3% mean relative error. Recovery experiments done with human blood gave 104% (90–121%) of the added lead. The method offers several advantages for routine application in comparison with the extraction/flame atomic-absorption procedure.     

Chromium determination in sea water by electrothermal atomic absorption spectrometry using Zeeman effect background correction and a multi-injection technique

Electrothermal atomic absorption spectrometry (ETAAS) applying a Zeeman effect background correction system (ZEBC) and a tranverse heated atomizer was used to directly determine chromium in sea water. Calcium chloride (at a concentration of 20 mg L^–1) was applied as chemical modifier with optimum charring and atomization temperatures of 1600°C and 2000°C, respectively. The detection limit was 0.2 μg L^–1, by injecting 20 μL aliquot of sea water sample. This detection limit could be reduced further to 0.05 μg L^–1, using multiple injections (injection of five 20 μL aliquot of sea water). The accuracy of the methods developed were confirmed by analyses of different certified reference materials. Finally, interferences from major and minor components of sea water are studied. Received: 20 February 1997 / Revised: 26 May 1997 / Accepted: 8 June 1997     

Chemical modification of graphite surfaces for the determination of chromium by electrothermal atomic absorption spectrometry

Different kinds of graphite surfaces (electrographite, pyrolytic graphite, zirconium and tungsten carbide-coated) have been tested for optimization of analytical conditions for the determination of chromium using electrothermal atomic absorption spectrometry. The effect of mineral acids on the peak absorbance signal of chromium has been investigated. Considering pyrolysis temperature and sensitivity, atomization from pyrolytic graphite coated surface showed the best performance.