Oxidation of Chromium and Molybdenum Arenetricarbonyl Complexes with tert-Butyl Hydroperoxide in Aprotic Solvents and in Methanol

Oxidation of chromium and molybdenum arenetricarbonyl complexes AreneM(CO)₃ with tert-butyl hydroperoxide (ROOH) in aprotic solvents such as heptane, aromatic hydrocarbons, dioxane, and in methanol (R"OH). Kinetic characteristics of the oxidation reaction, its rate, the composition and properties of the metal-containing products, and the yield of CO and CO₂ gases were found to depend on the acidity of the solvent used. The effect of the solvent nature was explained in terms of the proposed mechanism of AreneM(CO)₃ oxidation involving the formation of AreneM(CO)₃ · 2ROOH complexes in aprotic solvents and AreneM(CO)₃(ROH · ROOH) complexes in methanol and their further conversion into the reaction products by one-electron transfer route or through the stage of the metal complex protonation.     

醇与极性有机溶剂间氢键的多核NMR研究

醇是一类重要的有机溶剂,对其结构和性质的研究已有很长历史。由于OH的存在,醇分子间存在着较强的氢键缔合作用,使其结构变得复杂,因而较难对它得到一个很清楚的认识。用NMR方法研究氢键也有几十年历史。早在五十年代,Arnold,Becker等就用~1HNMR研究了EtOH在CCl_4中的行为,测量了化学位移随浓度的变化。Becker认为当醇浓度很稀时,体系中只存在单体-二聚体平衡,井结合IR数据求得了平衡常数及缔合物位移。有     

靛蓝-F-组合探针光度法检测非质子有机溶剂中的微量水

以靛蓝-F^-为组合探针,建立了非质子有机溶剂(DMSO、THF、DMF、二恶烷、乙腈)中微量水的比色检测新方法。结果表明,F^-加入靛蓝溶液后体系的颜色由蓝色变为黄绿色,进一步加入微量水之后,体系从黄绿色又变回蓝色,因而可作为一种变色探针实现对有机溶剂中微量水的裸眼识别检测。体系具有较高灵敏度,对DMSO、THF、DMF、二恶烷及乙腈中微量水的检测限分别为0.022%、0.043%、0.016%、0.34% 和0.015%。该方法实验操作简便、快速、灵敏、安全。实验结果表明,靛蓝与F^-的结合比为1:2。利用核磁滴定方法对机理进行了探讨。     

Refractive Index and Density Measurements for Selected Binary Protic‐Protic,Aprotic‐Aprotic,and Aprotic‐Protic Systems at Temperatures from 298.15 K to 308.15 K

The refractive indices (n) and the densities (ρ) of: (1) protic‐protic solvent mixtures (methanol‐ethanol, methanol‐porpanol, methanol‐butanol and ethanol‐water), (2) aprotic‐aprotic solvent mixtures (acetonitrile‐dimethylformamide, acetonitrile‐dimethylsulphoxide, and acetonitrile‐1,4‐dioxane) and (3) aprotic‐protic solvent mixtures (dimethylformamide, acetonitrile with water and some aliphatic alcohols) were measured experimentally at different temperatures (25, 30 and 35 °C). From the values of the measured refractive indices and densities, the excess refractive indices (n^E), molar refractions (R), atomic polarization (P_A), molar volumes (V), solvated radii (r) and polarizabilities (α) of the mixed solvents were calculated. The results show that the solvent‐solvent interaction reaches maximum value at a definite mole fraction (x) of each solvent depending on its nature. Also, the excess refractive indices, densities and atomic polarizations are found to decrease as the temperature increases. On the other hand, the molar volumes, solvated radii, molar refractions and polarizabilities are found to increase as the temperature increases.     

Selective Metal‐Free Hydrosilylation of CO2 Catalyzed by Triphenylborane in Highly Polar,Aprotic Solvents

Triphenylborane (BPh₃) in highly polar, aprotic solvents catalyzes hydrosilylation of CO₂ effectively under mild conditions to provide silyl formates with high chemoselectivity (>95 %) and without over‐reduction. This system also promotes reductive hydrosilylation of tertiary amides as well as dehydrogenative coupling of silane with alcohols.     

几种二醇与非质子溶剂相互作用的红外光谱研究

测定了1，2-乙二醇、1，2-丙二醇、1，4-丁二醇和1，6-己二醇在CCl4中分别与十几种非质子溶剂相互作用的红外光谱，通过考察频率位移的变化，定量地研究了二醇分子内氢键与分子间氢键的协同效应．在四氯化碳介质中，乙二醇、1，2-丙二醇和1，4-丁二醇体系中存在明显的氢键协同效应。利用红外光谱数据，估算了常温下二醇分子内缔体与非质子溶剂的交叉缔合常数，其数值大于一元正链醇与相应溶剂的交叉缔合常数．     

Effects of solvents on the electron configurations of the low-spin dicyano[meso-tetrakis(2,4,6-triethylphenyl)porphyrinato]iron(III) complex: importance of the C-H...N weak hydrogen bonding

There are two types of electron configurations, (d(xy))(2)(d(xz), d(yz))(3) and (d(xz), d(yz))(4)(d(xy))(1), in low-spin iron(III) porphyrin complexes. To reveal the solvent effects on the ground-state electron configurations, we have examined the (13)C- and (1)H-NMR spectra of low-spin dicyano[meso-tetrakis(2,4,6-triethylphenyl)porphyrinato]ferrate(III) in a variety of solvents, including protic, dipolar aprotic, and nonpolar solvents. On the basis of the NMR study, we have reached the following conclusions: (i) the complex adopts the ground state with the (d(xz), d(yz))(4)(d(xy))(1) electron configuration, the (d(xz), d(yz))(4)(d(xy)())(1) ground state, in methanol, because the d(pi) orbitals are stabilized due to the O-H...N hydrogen bonding between the coordinated cyanide and methanol; (ii) the complex also exhibits the (d(xz), d(yz))(4)(d(xy))(1) ground state in nonpolar solvents, such as chloroform and dichloromethane, which is ascribed to the stabilization of the d(pi) orbitals due to the C-H...N weak hydrogen bonding between the coordinated cyanide and the solvent molecules; (iii) the complex favors the (d(xz), d(yz))(4)(d(xy))(1) ground state in dipolar aprotic solvents, such as DMF, DMSO, and acetone, though the (d(xz), d(yz))(4)(d(xy))(1) character is less than that in chloroform and dichloromethane; (iv) the complex adopts the (d(xy))(2)(d(xz), d(yz))(3) ground state in nonpolar solvents, such as toluene, benzene, and tetrachloromethane, because of the lack of hydrogen bonding in these solvents; (v) acetonitrile behaves like nonpolar solvents, such as toluene, benzene, and tetrachloromethane, though it is classified as a dipolar aprotic solvent. Although the NMR results have been interpreted in terms of the solvent effects on the ordering of the d(xy) and d(pi) orbitals, they could also be interpreted in terms of the solvent effects on the population ratios of two isomers with different electron configurations. In fact, we have observed the unprecedented EPR spectra at 4.2 K which contain both the axial- and large g(max)-type signals in some solvents such as benzene, toluene, and acetonitrile. The observation of the two types of signals has been ascribed to the slow interconversion on the EPR time scale at 4.2 K between the ruffled complex with the (d(xz), d(yz))(4)(d(xy))(1) ground state and, possibly, the planar (or nearly planar) complex with the (d(xy))(2)(d(xz), d(yz))(3) ground state.     

Comparative Investigation of the Ionicity of Aprotic and Protic Ionic Liquids in Molecular Solvents by using Conductometry and NMR Spectroscopy

Electrical conductivity (σ), viscosity (η), and self‐diffusion coefficient (D) measurements of binary mixtures of aprotic and protic imidazolium‐based ionic liquids with water, dimethyl sulfoxide, and ethylene glycol were measured from 293.15 to 323.15 K. The temperature dependence study reveals typical Arrhenius behavior. The ionicities of aprotic ionic liquids were observed to be higher than those of protic ionic liquids in these solvents. The aprotic ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate, [bmIm][BF₄], displays 100 % ionicity in both water and ethylene glycol. The protic ionic liquids in both water and ethylene glycol are classed as good ionic candidates, whereas in DMSO they are classed as having a poor ionic nature. The solvation dynamics of the ionic species of the ionic liquids are illustrated on the basis of the ¹H NMR chemical shifts of the ionic liquids. The self‐diffusion coefficients D of the cation and anion of [HmIm][CH₃COO] in D₂O and in [D₆]DMSO are determined by using ¹H nuclei with pulsed field gradient spin‐echo NMR spectroscopy.     

Measuring the Relative Hydrogen‐Bonding Strengths of Alcohols in Aprotic Organic Solvents

Voltammetric experiments with 9,10‐anthraquinone and 1,4‐benzoquinone performed under controlled moisture conditions indicate that the hydrogen‐bond strengths of alcohols in aprotic organic solvents can be differentiated by the electrochemical parameter ΔE_p^red=|E_p^red(1)?E_p^red(2)|, which is the potential separation between the two one‐electron reduction processes. This electrochemical parameter is inversely related to the strength of the interactions and can be used to differentiate between primary, secondary, tertiary alcohols, and even diols, as it is sensitive to both their steric and electronic properties. The results are highly reproducible across two solvents with substantially different hydrogen‐bonding properties (CH₃CN and CH₂Cl₂) and are supported by density functional theory calculations. This indicates that the numerous solvent–alcohol interactions are less significant than the quinone–alcohol hydrogen‐bonding interactions. The utility of ΔE_p^red was illustrated by comparisons between 1) 3,3,3‐trifluoro‐n‐propanol and 1,3‐difluoroisopropanol and 2) ethylene glycol and 2,2,2‐trifluoroethanol.     

A review of the chemical manipulation of nanomaterials using solvents: Gelation dependent structures

The hydrolysis of Mg, Zr, and Ti alkoxides by water in solvent-alcohol mixtures has been examined in the absence of added acid or base catalysts, and herein, these data are reviewed. The presence of low dielectric constant solvents (benzene, toluene, or anisole), in varying ratios with methanol (or other alcohols), caused much more rapid gelation, subsequently yielding mesoporous materials with higher surface areas and larger pore volumes as fibrous, open web-like structures. The presence of high dielectric constant (polar aprotic) solvents such as acetone, acetonitrile, DMF, DMSO, or dimethyaniline was not effective in this way. A partial charge model was employed to explain why the low dielectric solvents forced more rapid hydrolysis, and it is concluded that the hydrolysis step is rate determining, approaching diffusion control, in this gelation process. The use of these “spectator solvents” helps simplify and enhance sol-gel and xerogel/aerogel synthesis schemes, and yields higher quality materials.     

A Solvent Effect in the Reaction of Diazomethane with Norbornane-2,3-dione 3-Hemiketals

A solvent effect in the reaction of diazomethane with norbornane-2,3-dione 3-hemiketal in various aprotic solvents such as ether, dichloromethane, tetrahydrofuran (THF), dioxane, and chloroform is reported. Unlike in methanol, preparatively useful quantities of oxetane derivatives were obtained along with a novel hexahydro-1H-cyclopenta[c]furan-1-one in these aprotic solvents. Dichloromethane and THF gave optimal yields of the two products. In some cases, α-ketoketals were formed as minor products along with the aforementioned products. Interestingly, TMSCHN₂ furnished hexahydro-1H-cyclopenta[c]furan-1-one as the predominant product.     

Osmotic Coefficients and Activity Coefficients of Nonaqueous Electrolyte Solutions. Part 2. Lithium Perchlorate in the Aprotic Solvents Acetone, Acetonitrile, Dimethoxyethane, and Dimethylcarbonate

Vapor pressure lowering by the addition of lithium perchlorate to the aprotic solvents acetone (0.02–0.6 m), acetonitrile (0.05–1.2 m), dimethoxyethane (0.02–0.4 m), and dimethylcarbonate (0.03–1.8 m) was measured at 25°C with high precision. The experimental data for the corresponding osmotic coefficients are compared to those obtained from the Pitzer equations and chemical model calculations. Mean activity coefficients are derived from the osmotic coefficients.     

Main‐chain viologen polymers with triflimide counterion exhibiting lyotropic liquid‐crystalline properties in polar organic solvents

The solution‐phase behavior of three main‐chain viologen polymers, which are composed of isomeric xylyl units and triflimide as a counterion, was studied in methanol, dimethylformamide, acetonitrile, and dimethyl sulfoxide as solvents microscopically under crossed polarizers. Each of them exhibited a lyotropic lamellar phase in both polar protic and aprotic solvents. Their C^* for the formation of biphasic solutions (1–5 wt %) and concentrations (20–30 wt %) for the lyotropic solutions in methanol was much lower than those in polar aprotic solvents (20–71 and 60–81 wt %, respectively). Their high solubility, high C^* for the formation of biphasic solutions, and high concentrations for the formation of lyotropic solutions in polar aprotic solvents were related to the significant reduction of strong ionic interactions between triflimide and 4,4′‐bipyridinium ions in each of these viologen polymers. They were the first examples of viologen polymers that exhibited a lyotropic phase in polar aprotic solvents. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2015–2024, 2002     

Effect of Cation Size on Solvation and Association with Superoxide Anion in Aprotic Solvents

Influence of cation size on solvation strength, diffusion, and kinetics of the association reaction with anions O₂⁻ in aprotic solvents, such as acetonitrile and dimethyl sulfoxide, has been investigated by means of molecular dynamics simulations. The work is motivated by the need to understand the molecular nature of the solvent-induced changes in capacity of Li-air batteries. We have shown that the dependence of the solvation shell stability on the cation size has a maximum at a particular ion radius that corresponds to a solvent coordination number of 4. The shell stability maximum coincides with the diffusion coefficient minimum. The variation of the cation shell stability has a crucial impact on the kinetics of the cation-O₂⁻ association. We have demonstrated that profound inhibition of the association reaction for Li⁺ in dimethyl sulfoxide is a result of the lock-and-key effect that cannot be described in the framework of Hard Soft Acid Base theory.     

Transformation of 1,1-Dichloro-2,2-bis(4-nitrophenyl)ethene in the Reaction with Nitrite Ion in Polar Aprotic Solvents

The reaction of 1,1-dichloro-2,2-bis(4-nitrophenyl)ethene with sodium nitrite in polar aprotic solvents has been studied. Products of the reaction have been identified, and effects of different factors, including reactant dissociation and solvation, on the reaction rate constants have been analyzed. Thermodynamic parameters of the reaction have been determined, the multistep process has been simulated by quantum chemical calculations, and a plausible mechanism has been proposed.     

Acid-base equilibria of substituted pyridine N-oxides in methanol

Acid dissociation constants in methanol for eight substituted pyridine N-oxides having a wide range of acid-base properties, [quinoline N-oxide (bi-cyclic amine N-oxide) and pyridine (heterocyclic amine)] have been determined using the potentiometric titration method. A linear correlation between ourmethanol data and aqueous pK _a values from the literature has been found. As in polar aprotic solvents cationic homoconjugation phenomenon has been found to be present for sufficiently basic N-oxides. The tendency of substituted pyridine N-oxides towards cationic homoconjugation in methanol is weaker than in polar aprotic solvents and increases with increasing basicity of N-oxides. It has also been found that, in contrast to polar aprotic solvents, the cationic homoconjugation phenomenon in methanol is much more pronounced for heterocyclic amines than their N-oxides.     

Preferential Solvation in Mixed Solvents

The Kirkwood–Buff integrals and the volume-corrected preferential solvation parameters for the first solvation shell of binary mixtures of tetrahydrofuran with many organic solvents, calculated from reported thermodynamic data at the temperatures for which these data were available, are reported. The co-solvents include c-hexane, methyl-c-hexane, n-heptane, i-octane, benzene, toluene, ethylbenzene, 1-chlorobutane, dichloromethane, 1,2-dichloroethane, chloroform, 1,1,1-trichloroethane, tetrachlorom-ethane, tetrachloroethene, hexafluoro benzene, ethanol, 1-propanol, 2-propanol, dibutyl ether, acetic acid, acetone, dimethyl sulfoxide, tetramethylene sulfone (sulfolane), acetonitrile, pyrrolidine, and triethylamine. The preferential solvation parameters of these mixtures are discussed in terms of the interactions that occur.     

Solvatochromism of Heteroaromatic Compounds: XVII. Effect of Aprotic Inert Solvents on the Structure of 2-(2,2-Dicyanovinyl-1-methylthio)-5-methylpyrrole

The effect of aprotic inert media on the conformational structure of 2-(2,2-dicyanovinyl-1-methylthio)-5-methylpyrrole was studied by UV, NMR, and IR spectroscopy. Chloroform and less polar solvents stabilize only one of the four conformers. In more polar media, there is a dynamic equilibrium between all the possible conformers of the title compound. The state of the equilibrium depends both on the solvent and on the temperature.     

Photoluminescence Properties of Graphene Oxide in Non-Aqueous Solvents

Detailed attention to the interaction between graphene oxide (GO) and various organic fluorophores has been documented in literature as a result of which the impact of GO on the photophysical properties of the fluorophores is well known to the scientific community. However, the photoluminescence (PL) properties of GO in polar aprotic solvents are yet to be established. In this article, the PL properties of GO in polar aprotic solvents using various spectroscopic techniques have been reported. n-π* transition due to the C=O bonds in the sp³ hybrid regions and π-π* transition due to C=C bonds in the sp² hybrid are prominent in GO. The presence of quasi-molecules within sp²-sp³ domains acts as PL centers located in the sp³ matrixes of GO are responsible for the PL properties. This study showcases the presence of multiple emissive states of GO in polar aprotic solvents and conveys the fact that the PL properties of GO are very much wavelength-dependent.     

A Carbohydrate–Anion Recognition System in Aprotic Solvents

A carbohydrate–anion recognition system in nonpolar solvents is reported, in which complexes form at the B‐faces of β‐D ‐pyranosides with H1‐, H3‐, and H5‐cis patterns similar to carbohydrate–π interactions. The complexation effect was evaluated for a range of carbohydrate structures; it resulted in either 1:1 carbohydrate–anion complexes, or 1:2 complex formation depending on the protection pattern of the carbohydrate. The interaction was also evaluated with different anions and solvents. In both cases it resulted in significant binding differences. The results indicate that complexation originates from van der Waals interactions or weak CH ??? A^? hydrogen bonds between the binding partners and is related to electron‐withdrawing groups of the carbohydrates as well as increased hydrogen‐bond‐accepting capability of the anions.