Correlated ab initio calculations of one-bond 31P?77Se and 31P?125Te spin–spin coupling constants in a series of PSe and PTe systems accounting for relativistic effects (part 2)

Synthetic chalcogen–phosphorus chemistry permanently makes new challenges to computational Nuclear Magnetic Resonance (NMR) spectroscopy, which has proven to be a powerful tool of structural analysis of chalcogen–phosphorus compounds. This paper reports on the calculations of one-bond ³¹P ⁷⁷Se and ³¹P ¹²⁵Te NMR spin–spin coupling constants (SSCCs) in the series of phosphine selenides and tellurides. The applicability of the combined computational approach to the one-bond ³¹P ⁷⁷Se and ³¹P ¹²⁵Te SSCCs, incorporating the composite nonrelativistic scheme, built of high-accuracy correlated SOPPA (CC2) and Coupled Cluster Single and Double (CCSD) methods and the Density Functional Theory (DFT) relativistic corrections (four-component level), was examined against the experiment and another scheme based on the four-component relativistic DFT method. A special J-oriented basis set (acv3z-J) for selenium and tellurium atoms, developed previously by the authors, was used throughout the NMR calculations in this work at the first time. The proposed computational methodologies (combined and ‘pure’) provided a reasonable accuracy for ³¹P ⁷⁷Se and ³¹P ¹²⁵Te SSCCs against experimental data, characterizing by the mean absolute percentage errors of about 4% and 1%, and 12% and 8% for selenium and tellurium species, respectively. The present study reports typical relativistic corrections to ⁷⁷Se ³¹P and ¹²⁵Te ³¹P SSCCs, calculated within the four-component DFT formalism for a broad series of tertiary phosphine selenides and tellurides with different substituents at phosphorus.     

Low-temperature 1H, 13C, 77Se,and 125Te NMR studies on the apical-apical ligand exchange via the hypervalent tellurium and selenium ate complexes [10-M-3(C3); M = Se,Te] in the reactions of diaryl tellurides and selenides with aryllithium reagents

Pentafluorophenyl phenyl telluride ( 1 ) and 3,5-dichloro-2,4,6-trifluorophenyl phenyl telluride ( 2 ) react with pentafluorophenyllithium or 3,5-dichloro-2,4,6-trifluorophenyllithium in THF at low temperatures to form the corresponding tellurium ate complexes ( A ) and ( B ) as sole intermediates in the ligand exchange on the hypervalent tellurium atom. The corresponding selenides ( 3 ) and ( 4 ) also react with identical aryllithium reagents in THF to form the discrete intermediates, selenium ate complexes ( C ) and ( D ), in the exchange reactions. In these ligand exchange reactions of tellurides and selenides, electron-withdrawing ligands occupy the apical positions and the exchange takes place between these apical-oriented groups. The low-temperature ¹H, ¹³C, ⁷⁷Se, and ¹²⁵Te NMR spectroscopic techniques are effective methods for detection of unstable tellurium and selenium ate complexes.     

Iron chalcogenide carbonyl clusters and their heterometallic derivatives

This paper reviews the results of XRD, Mössbauer, and¹H,⁷⁷Se, and¹²⁵Te NMR studies of the structure of iron chalcogenide carbonyl clusters with a Fe₃X (X = Se, Te) framework and a series of their heterometallic derivatives synthesized by successive replacement of mononuclear iron carbonyl fragments by isolobal metallorganic groups containing Mo and W.     

Gold complexes containing organoselenium and organotellurium ligands

This article reviews the synthesis, structures, reactions and spectroscopic studies of gold complexes containing organoselenium and organotellurium ligands, i.e. compounds containing an Au–Se–C and Au–Te–C unit. The literature up to June 2009 has been covered. Appendix 1 lists important structural data of complexes which have been characterised by X-ray diffraction, whilst Appendix 2 contains a compilation of ⁷⁷Se and ¹²⁵Te NMR data for these compounds.     

Selenium-77 nuclear magnetic resonance in mono- and disubstituted benzo[b]selenophenes

The ⁷⁷Se chemical shifts of 79 mono- or disubstituted benzo[b]selenophenes are reported. The results in the 2- and 3-substituted derivatives closely parallel those previously obtained in the corresponding selenophenes. The measured parameters also correlate well with those measured in benzo[b]tellurophenes. The ¹²⁵Te and ⁷⁷Se chalcogen nuclei appear to be much more sensitive to substituent effects than the more classical nuclei. The effects of Cr(acac)₃, Eu(dpm)₃ and concentration on the ⁷⁷Se NMR spectra are briefly discussed.     

Hexamethyl-1,2,3-tristanna-[3]ferrocenophane – Molecular Structure and Cleavage of the Tin–Tin Bonds by Iodine,Sulfur, Selenium,and Tellurium

Hexamethyl-1,2,3-tristanna-[3]ferrocenophane ( 1 ) was prepared by the reaction of 1,1′-bis(dimethylstannyl)ferrocene ( 3 ) with bis(diethylamino)dimethylstannane. The molecular structure of 1 was determined by X-ray crystallography. The monoclinic unit cell (space group P2₁/c; a = 18.659(4), b = 17.311(3), c = 13.719(3) Å; β = 111.02(3)°) contains two independent molecules which differ slightly in their conformation. The cyclopentadienyl rings are almost parallel, but the positions of the substituted carbon atoms are twisted by τ £ 62° with respect to the ecliptic positions. The reactivity of 1 towards iodine and chalcogens E (E = S, Se, Te) was studied. Iodine reacts to give 1,1′-bis[iodo(dimethyl)stannyl]ferrocene ( 6 ) and dimethyltin diiodide. In the case of the chalcogens, the detectable and isolated products are 1,3-distanna-2-chalcogena-[3]ferrocenophanes (E = S ( 7 ), Se ( 8 ), Te ( 9 )) in addition to trimeric dimethyltin chalcogenides, (Me₂SnE)₃. Crystals suitable for X-ray structural analysis could be obtained of 1,3-distanna-2-thia-[3]ferrocenophane ( 7 ); the triclinic unit cell (space group P 1) has the dimensions a = 6.538(2), b = 9.013(2), c = 15.442(2) Å; α = 92.15(2), β = 91.89(2), γ = 109.43(2)°. The molecular structures of 1 and 7 are compared with those of other 1,3-distanna-[3]ferrocenophanes. All compounds were studied by NMR spectroscopy (¹H, ¹³C, ⁷⁷Se, ¹¹⁹Sn and ¹²⁵Te NMR) in order to establish the presence of the [3]ferrocenophanes 7 – 9 and of the cycles (Me₂SnE)₃ in solution.     

Concurrent 19F and 77Se or 19F and 125Te NMR T1 measurements for determination of 77Se and 125Te absolute shielding scales

⁷⁷Se and ¹²⁵Te absolute nuclear shieldings in SeF₆ and TeF⁶ are determined from simultaneous T₁ measurements of ⁷⁷Se and ¹⁹F (and ¹²⁵Te and ¹⁹F) in the gas phase.     

Palladium and Platinum Complexes from Methyl(2-Thienyl) Chalcogenides and BIS(2-Thienyl) Dichalcogenides

The preparation of [M(C₄H₃SECH₃)₂Cl₂] (M = Pd, Pt; E = Se, Te) and [Pd₆Te₆(C₄H₃S)₂(PPh₃)₆Cl₂] from methyl(2-thienyl)chalcogenides and bis(2-thienyl) ditelluride is reported. The products are identified and characterized by X-ray crystallography and by ⁷⁷Se and ¹²⁵Te NMR spectroscopy.     

Multinuclear NMR studies on CF3 substituted sulfur,selenium and tellurium compounds

A systematic investigation of thirty-four CF₃Se(II, IV) and eight CF₃Te(II, IV) compounds by ¹³C, ¹⁹F, ⁷⁷Se and ¹²⁵Te NMR spectroscopy resulted in some general features for chemical shifts and coupling constants which agree with the trends of reported ¹⁹F and new ¹³C NMR data of CF₃S(II, IV) compounds. Moreover, the NMR spectra of molecules of the type E=CXY (E = chalcogen, X, Y = halogen) and substances containing a CSe double bond have been studied. From the comparison of these NMR data with those of CF₃ substituted chalcogen compounds, a partial double bond character of the carbon-fluorine and carbon-chalcogen bond in CF₃ substituted chalcogen compounds can be derived:

     

Preparation and characterization of symmetrical bis[4-chloro-2-pyrimidyl] dichalcogenide (S, Se, Te) and unsymmetrical 4-chloro-2-(arylchalcogenyl) pyrimidine: X-ray crystal structure of 4-chloro-2-(phenylselanyl) pyrimidine and 2-(p-tolylselanyl)-4-chloropyrimidine

Synthesis of a novel class of multinucleate pyrimidine chalcogen (S/Se/Te) derivatives has been successfully attempted for the first time by the selective substitution of chlorine at the C-2 position of 2,4-dichloropyrimidine with nucleophilic dichalcogenide anion E₂²⁻ (E = S, Se, Te) to afford bis[4-chloro-2-pyrimidyl] dichalcogenide. The highly electrophilic nature of 2,4-dichloropyrimidine compared to aryl chlorides has been further exploited to prepare a variety of 4-chloro-2-(arylchalcogenyl) pyrimidine compounds by substituting the chlorine exclusively at the C-2 position of 2,4-dichloropyrimidine with a variety of chalcogen bearing aryl anions ArE⁻ (Ar = phenyl, 1-naphthyl, p-tolyl, 4,6-dimethyl-2-pyrimidyl, 2-pyridyl, 4-methyl-2-pyridyl). All the newly prepared symmetrical and unsymmetrical pyrimidyl chalcogen compounds have been thoroughly characterized with the help of various spectroscopic techniques viz., NMR (¹H, ¹³C, ⁷⁷Se), FT-IR and mass spectrometry (in representative cases). The crystal structures of 4-chloro-2-(phenylselanyl) pyrimidine and 2-(p-tolylselanyl)-4-chloropyrimidine have been determined by X-ray crystallography.     

NMR studies on dimethyl selenide and dimethyl telluride oriented in the nematic phase of a liquid crystal

¹H NMR spectra of dimethyl selenide with ¹³C and ⁷⁷Se satellites and of dimethyl telluride with ¹³C, ¹²³Te and ¹²⁵Te satellites have been investigated. The structural information has been derived and is found to be in good agreement with microwave results for dimethyl selenide. For dimethyl telluride our results disagree with earlier data obtained by extrapolation from similar molecules.     

Regioselective reactions of sulfur, selenium and tellurium chlorides with allyl trimethyl silane

Electrophilic addition of SCl₂, SeCl₂ and SeCl₄ to 2 equivalents of allyl trimethyl silane proceeds regioselectively to give bis[2-chloro-3-(trimethylsilyl)propyl] sulfide, selenide and selenium dichloride, respectively. The reaction with TeCl₄ affords only diallyl tellurium dichloride. The structures of the compounds were confirmed by ¹H, ¹³C, ⁷⁷Se and ¹²⁵Te NMR techniques.     

Generation and detection of tellurane [10-Te-4(C4)] and selenurane [10-Se-4(C4)] having alkyl and aryl ligands

Formation of 2,2′-biphenylylenedimethylselenurane and -tellurane was observed by the ¹H, ¹³C, ⁷⁷Se, and ¹²⁵Te NMR studies at low temperature, in the reactions of dibenzoselenophene Se-oxide and 2,2′-biphenylylenedibromotellurane with methyllithium. These hypervalent compounds were unstable and decomposed at room temperature to give the corresponding dibenzochalcogenophenes quantitatively.     

Double Chalcogen Bonds: Crystal Engineering Stratagems via Diffraction and Multinuclear Solid-State Magnetic Resonance Spectroscopy

Group 16 chalcogens potentially provide Lewis-acidic σ-holes, which are able to form attractive supramolecular interactions with electron rich partners through chalcogen bonds. Here, a multifaceted experimental and computational study of a large series of novel chalcogen-bonded cocrystals, prepared using the principles of crystal engineering, is presented. Single-crystal X-ray diffraction studies reveal that dicyanoselenadiazole and dicyanotelluradiazole derivatives work as promising supramolecular synthons with the ability to form double chalcogen bonds with a wide range of electron donors including halides and oxygen- and nitrogen-containing heterocycles. Extensive ⁷⁷Se and ¹²⁵Te solid-state nuclear magnetic resonance spectroscopic investigations of cocrystals establish correlations between the NMR parameters of selenium and tellurium and the local chalcogen bonding geometry. The relationships between the electronic environment of the chalcogen bond and the ⁷⁷Se and ¹²⁵Te chemical shift tensors were elucidated through a natural localized molecular orbital density functional theory analysis. This systematic study of chalcogen-bond-based crystal engineering lays the foundations for the preparation of the various multicomponent systems and establishes solid-state NMR protocols to detect these interactions in powdered materials.     

Selenium-77 NMR chemical shifts of five-membered selenium and sulphur heterocycles with CSe,CS,and CO groups

This paper reports the ⁷⁷Se NMR chemical shifts of 1,3-dithiole-, 1,3-thiaselenole- and 1,3-diselenole-2-ones, -thiones and -selones, of the corresponding saturated compounds 1,3-diselenolane-2-one, -thione and -selone, and the 1,3-thiaselenolium tetrafluoroborates, either unsubstituted or substituted by morpholino, ethylthio or ethylseleno groups in the 2-position. The ⁷⁷Se chemical shift values of the ring selenium and the C?Se groups are compared with the ¹³C chemical shift values of neighbouring carbon atoms. The relationships between the ⁷⁷Se chemical shifts of the C?Se groups and the wavelengths of their n→* absorption in the UV-visible spectrum are discussed with respect to the significance of the δE term in the contribution of the paramagnetic screening and the electron density distribution.     

Complexation of Zn(II), Cd(II) and Hg(II) with thiourea and selenourea: A 1H, 13C, 15N, 77Se and 113Cd solution and solid-state NMR study

Zinc(II), cadmium(II) and mercury(II) complexes of thiourea (TU) and selenourea (SeU) of general formula M(TU)₂Cl₂ or M(SeU)₂Cl₂ have been prepared. The complexes were characterized by elemental analysis and NMR (¹H, ¹³C, ¹⁵N, ⁷⁷Se and ¹¹³Cd) spectroscopy. A low-frequency shift of the C=S resonance of thiones in ¹³C NMR and high-frequency shifts of N–H resonances in ¹H and ¹⁵N NMR are consistent with sulfur or selenium coordination to the metal ions. The Se nucleus in Cd(SeU)₂Cl₂ in ⁷⁷Se NMR is deshielded by 87?ppm on coordination, relative to the free ligand. In comparison, the analogous Zn(II) and Hg(II) complexes show deshielding by 33 and 50?ppm, respectively, indicating that the orbital overlap of Se with Cd is better. Principal components of ⁷⁷Se and ¹¹³Cd shielding tensors were determined from solid-state NMR data.     

13C, 77Se and 125Te NMR in ortho-halogenated seleno- and telluro-phenetoles

⁷⁷Se and ¹²⁵Te chemical shifts have been measured for o-halogenated seleno- and telluro-phenetoles. Correlations exist between these parameters and the halogen electronegativities or the ¹³C chemical shifts, except for the fluorine derivatives. The chalcogen shifts are related to the shifts of various nuclei in halobenzene derivatives, namely ¹H in benzenes, ¹³C in toluenes, ¹⁵N in anilines and ¹⁹F in fluorobenzenes. ⁷⁷Se and ¹²⁵Te chemical shifts are correlated in the o-halogenated seleno- and telluro-phenetoles and in chalcogen analogues of o-methoxy-selenoanisole and -tellurophenetole: Δδ(Te) = 1.60Δδ(Se). The observed gradient is close to values previously reported for other selenides and tellurides, but differs from the value observed in heterocycles. This observation is discussed.     

Spiro Compounds of Tin,Selenium and Tellurium Containing 1,3,2‐Diazaelement‐[3]ferrocenophane Units

The reactions of 1,1′‐bis[Li(trimethylsilyl)amino]ferrocene ( 2a ) with selenium‐ or tellurium tetrahalides gave the 1,1′,3,3′‐tetrakis(trimethylsilyl)‐1,1′,3,3′‐tetraaza‐2‐selene‐ and 2‐tellura‐2,2′‐spirobi[3]ferrocenophanes 5 and 6 , respectively. The analogous reaction with tin dichloride afforded the corresponding 2‐stanna‐2,2′‐spirobi[3]ferrocenophane ( 9 ) rather than the expected stannylene 8 . The reaction of 2,2‐dichloro‐1,3‐bis(trimethylsilyl)‐1,3,2‐diazastanna‐[3]ferrocenophane ( 10 ) with the dilithio reagent 2b also gave the spirotin compound 9 , of which the molecular structure was determined by X‐ray analysis. The formation of the products and their solution‐state structures was deduced from multinuclear magnetic resonance spectroscopic studies (¹H, ¹³C, ¹⁵N, ²⁹Si, ⁷⁷Se, ¹²⁵Te, ¹¹⁹Sn NMR spectroscopy).     

Telluride clusters of molybdenum: Synthesis, structures, and NMR spectra

High-temperature reactions of Mo, chalcogen (S or Se), Te, and Br₂ in molar ratio Mo: S/Se: Te: Br = 3: 1: 6: 4 were carried out. The reaction products were subjected to mechanochemical activation with K(Dtp) (Dtp = (EtO)₂PS₂) in a vibrational mill, resulting in the formation of new compounds [Mo₃(μ₃-Q)_0.5(μ₃-O)_0.5(μ₂-Te₂)₃(Dtp)₃](Dtp) (Q = Se (I) and S (II)). The structure of compound I has been established by X-ray diffraction analysis. Solutions of compounds I and II contain mixtures of [Mo₃(μ₃-Q)(μ₂-Te₂)₃(Dtp)₃]⁺ and [Mo₃(μ₃-O)(μ₂-Te₂)₃(Dtp)₃]⁺, which is confirmed by mass spectrometry and ³¹P, ⁷⁷Se, and ¹²⁵Te NMR spectroscopy. Quantum-chemical calculations of the ¹²⁵Te NMR chemical shifts were performed. The compounds are also characterized by IR spectroscopy, Raman spectroscopy, and elemental analysis. Structure I contains short nonvalent contacts between the sulfur atom of the out-of-sphere Dtp anion and the axial tellurium atoms of the cluster.     

Comparing main group and transition-metal square-planar complexes of the diselenoimidodiphosphinate anion: a solid-state NMR investigation of M[N(iPr2PSe)2]2 (M = Se, Te; Pd, Pt)

A comparison of the square-planar complexes of group 10 (Pd(II), Pt(II)) and 16 (Se(II), Te(II)) centers with the tetraisopropyldiselenoimidodiphosphinate anion, [N((i)Pr2PSe)2](-), is made on the basis of the results of a solid-state (31)P, (77)Se, (125)Te, and (195)Pt NMR investigation. Density functional theory calculations of the respective chemical shift and (14)N electric field gradient tensors in these compounds complement the experimental results. The NMR spectra were analyzed to determine the respective phosphorus, selenium, tellurium, and platinum chemical shift tensors along with numerous indirect spin-spin coupling constants. Special attention was given to observed differences in the NMR parameters for the transition metal and main-group square-planar complexes. Residual dipolar coupling between (14)N and (31)P, not observed in the solid-state (31)P NMR spectra of the Pd(II) and Pt(II) complexes, was observed at 4.7 and 7.0 T for M[N((i)Pr 2PSe)2]2(M = Se, Te) yielding average values of R((31)P, (14)N)eff = 890 Hz, CQ((14)N) = 2.5 MHz, (1) J( (31)P, (14)N) iso= 15 Hz, alpha = 90 degrees , beta = 17 degrees . The span, Omega, and calculated orientation of the selenium chemical shift tensor for the diselenoimidodiphosphinate anion is found to depend on whether the selenium is located within a pseudoboat or distorted-chair MSe 2P 2N six-membered ring. The largest reported values of (1)J((77)Se, (77)Se) iso, 405 and 435 Hz, and (1)J((125)Te, (77)Se)iso, 1120 and 1270 Hz, were obtained for the selenium and tellurium complexes, respectively; however, in contrast a correspondingly large value of (1)J((195)Pt, (77)Se)iso was not found. The chemical shift tensors for the central atoms, Se(II) and Te(II), possess positive skews, while for Pt(II) its chemical shift tensor has a negative kappa. This observed difference for the shielding of the central atoms has been explained using a qualitative molecular orbital approach.