Gramicidin A channel in a matrix from a semifluorinated surfactant monolayer

Gramicidin A, a polypeptide antibiotic forming transmembrane ion channels, has been incorporated into a Langmuir monolayer formed by a semifluorinated alkane (SFA). In this work, partially fluorinated tetracosane, perfluorohexyloctadecane (F6H18), has been applied, aiming at finding a suitable matrix for gramicidin A to be transferred onto solid support for a biosensor design. For this purpose, the physiological conditions were of special interest (mixed monolayers containing low gramicidin proportion and the surface pressure of 30 mN/m). Mixed monolayers of gramicidin and SFA were found to be miscible within the whole range of mole fractions. A very significant increase of the stability of SFA monolayer has been found in the presence of gramicidin, even at such a low proportion as X(gramicidin) = 0.1, which is reflected in a 3.5-fold increase of the collapse pressure value of mixed monolayer as compared to the film from pure SFA. This interesting phenomenon has been interpreted as being due to the existence of a strong dipole-dipole interaction between both film-forming molecules. Opposite sign of the measured electric surface potential for gramicidin and SFA, resulting from different directions of the dipole moment vectors in both film molecules, implies that the ordered, antiparallel orientation of the dipole moments in the mixed gramicidin/SFA system can be responsible for its extremely high stability.     

Hydrogen bond lifetime dynamics at the interface of a surfactant monolayer

The dynamics of water near the polar headgroups of surfactants in a monolayer adsorbed at the air/water interface is likely to play a decisive role in determining the physical behavior of such organized assemblies. We have carried out an atomistic molecular dynamics (MD) simulation of a monolayer of the anionic surfactant sodium bis(2-ethyl-1-hexyl) sulfosuccinate (aerosol-OT or AOT) adsorbed at the air/water interface. The simulation is performed at room temperature with a surface coverage of that at the critical micelle concentration (78 Angstrom(2)/molecule). Detailed analyses of the lifetime dynamics of surfactant-water (SW) and water-water (WW) hydrogen bonds at the interface have been carried out. The nonexponential hydrogen bond lifetime correlation functions have been analyzed by using the formalism of Luzar and Chandler, which allowed identification of the bound states at the interface and quantification of the dynamic equilibrium between bound and quasi-free water molecules, in terms of time-dependent relaxation rates. It is observed that the water molecules present in the first hydration layer form strong hydrogen bonds with the surfactant headgroups and hence have longer lifetimes. Importantly, it is found that the overall relaxation of the SW hydrogen bonds is faster for those water molecules which form two hydrogen bonds with the surfactant headgroups than those forming one such hydrogen bond. Equally interestingly, it is further noticed that water molecules beyond the first hydration layer form weaker hydrogen bonds than pure bulk water.     

Self-assembled monolayer gold electrode for surfactant analysis

A gold electrode coated with a self-assembled monolayer of octane-thiol (SAM/Au) has been used as an amperometric detector for the determination of surfactants. This detector operated in the presence of a high percentage of organic solvent and was adapted to an HPLC System. At the SAM/Au, the electrochemical response of an electroactive tracer (potassium ferricyanide) was completely inhibited, but, in the presence of a cationic surfactant, the electrochemical reduction was progressively restored. In flow injection analysis, using the SAM/Au in an amperometric flow-through detector polarised at 0.0 V vs Ag/AgCl, a linear response (i=f{[surfactant]}) was observed for cationic surfactants e.g. cetylpyridinium chloride in the concentration range 2 × 10⁻⁶–1 × 10⁻³ M. The electrochemical data along with the determination of the ion pair stoichiometry between the redox tracer and the surfactant suggest an electrochemical response related to ion pair formation and governed by electron transfer by tunneling effect. Received: 28 January 1997 / Accepted: 7 March 1997     

Auto-organized nano-structure of collagen on Gemini surfactant monolayer

Two kinds of Gemini surfactant monolayer, which showed different hydrophobic property, were selected as adsorption substrates for collagen. The topographic images of collagen were investigated by using an atomic force microscopy (AFM). Their auto-organized nano-structures were influenced by the property of substrate and the process of sample preparation, such as concentration of collagen solution, adsorption time and drying condition. Network-like structures formed on the both Gemini monolayers. With increasing concentration of collagen solution and adsorption time, the density of the network-like structure increased and their strands became wider and the mesh sizes decreased apparently. Contrary to the reference, the network-like structures of collagen also formed on the less hydrophobic Gemini surfactant monolayer even after very short adsorption time, which was considered to result from the more hydrophobic patch on it.     

Bending moduli and spontaneous curvature of the monolayer in a surfactant bilayer

We developed a method to evaluate the mechanical properties of the monolayers in symmetric surfactant bilayers using self-consistent field theory. A specific boundary condition is used to impose the same curvature onto the two opposing monolayers at the surfactant chemical potential equal to that of the corresponding homogeneously curved bilayer. Typically, the spontaneous monolayer curvature not equal 0 and its value depend on the surfactant architecture. This is of importance for the thermodynamics and topology of lamellar surfactant phases. Furthermore, it may be relevant in processes involving biological membranes, for example, the fusion and budding of vesicles and the incorporation of proteins in lipid bilayers.     

Thermodynamic and structural characterization of a mixed perfluorocarbon-phospholipid ternary monolayer surfactant system

Pulmonary lung surfactant is a mixture of surfactants that reduces surface tension during respiration. Perfluorinated surfactants have potential applications for artificial lung surfactant formulations, but the interactions that exist between these compounds and phospholipids in surfactant monolayer mixtures are poorly understood. We report here, for the first time, a detailed thermodynamic and structural characterization of a minimal pulmonary lung surfactant model system that is based on a ternary phospholipid-perfluorocarbon mixture. Langmuir and Langmuir-Blodgett monolayers of binary and ternary mixtures of the surfactants 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG) and perfluorooctadecanoic acid (C18F) have been studied in terms of miscibility, elasticity and film structure. The extent of surfactant miscibility and elasticity has been evaluated via Gibbs excess free energies of mixing and isothermal compressibilities. Film structure has been studied by a combination of atomic force microscopy and fluorescence microscopy. Combined thermodynamic and microscopy data indicate that the ternary monolayer films were fully miscible, with the mixed films being more stable than their pure individual components alone, and that film compressibility is minimally improved by the addition of perfluorocarbons to the phospholipids. The importance of these results is discussed in context of these mixtures' potential applications in pulmonary lung surfactant formulations.     

The sponge phase of a mixed surfactant system

We study the sponge phase of the mixed non-ionic/ionic surfactant system C14DMAO-TTAB-hexanol-brine. Our aim is to determine if this phase exists in this mixed system and if it preserves or changes its structure when the relative amount of the charged surfactant is increased in the mixture. SAXS, FFEM, and conductivity results show that for the same bilayer volume fraction the sponge phase preserves its global structure. We propose a method to determine the geometrical obstruction factor from electrical conductivity measurements in ionic sponge phases. Analysis of lamellar phases in the same system shows that the bilayer thickness increases when the ionic surfactant concentration is increased.     

Langmuir monolayer behavior of an ion pair amphiphile with a double-tailed cationic surfactant

The spread or Langmuir monolayer behavior of an ion pair amphiphile (IPA), hexadecyltrimethylammonium-dodecylsulfate (HTMA-DS), with a double-tailed cationic surfactant, dihexadecyldimethylammonium bromide (DHDAB), at the air/water interface was analyzed with surface pressure-area isotherms, area relaxation curves, and Brewster angle microscope (BAM) images. The surface pressure-area isotherms showed that with increasing the DHDAB molar ratio, X(DHDAB), spread monolayers of HTMA-DS with DHDAB became rigid. In addition, unreasonably small limiting areas per alkyl chain of the molecules in the monolayers were found, especially at X(DHDAB)=0.5, implying the molecular loss from the monolayers at the interface. For spread HTMA-DS/DHDAB monolayers at the interface, a new IPA, DHDA-DS, was proposed to form through the displacement of HTMA(+) from HTMA-DS by DHDA(+), leaving HTMA(+) dissociated. The formation of DHDA-DS and the desorption of dissociated HTMA(+) upon the interface compression were supported by the results obtained from designed monolayer experiments with BAM observations, and were discussed by considering the hydrophilicity, packing efficiency, and headgroup charge characteristic of the species. Moreover, the area relaxation curves of spread HTMA-DS/DHDAB monolayers suggested that the formation of DHDA-DS was strongly related to the improved monolayer stability at the interface, which may have implications for the DHDAB-enhanced physical stability of catanionic vesicles composed of HTMA-DS.     

Investigation of elutions from a surfactant immobilized solid phase extraction sorbent based upon the hydrophobicity of the trapped species

A unique solid phase extraction (SPE) sorbent having a removable “stationary phase” is presented. This removable phase consists of alkyltrimethylammonium surfactant, which is initially immobilized onto hydrophilic strong cation exchange resin. The surfactant chain through hydrophobic interactions extracts hydrophobic analytes in the same manner as conventional bonded alkyl moieties on silica-based non-polar sorbents. For the extraction of very hydrophobic species with conventional sorbents, solvents such methylene chloride and benzene are needed to break strong hydrophobic interactions for efficient elutions. These solvents however are toxic to the analyst and present a significant environmental concern. Using a removable “stationary phase”, hydrophobic interactions need not be broken between the analyte and the sorbent. In the presented approach, the surfactant (“stationary phase”) is removed via ion exchange with exchange ions in very mild aqueous-based and instrument compatible solutions. The analyte, being associated with the surfactant, is also removed in the process. Very efficient elutions of analytes, regardless of hydrophobicity, under mild and more favorable environmental conditions are a direct benefit of having a removable “stationary phase”. Rinse solution parameters explored include exchange cation type and concentration, and alcohol type and concentration. The extraction of three test molecules of varying hydrophobicity, naphthalene, pyrene and benzo(ghi)perylene, is investigated using this sorbent material.     

Novel cationic surfactant ion pair based solid phase microextraction fiber for nano-level analysis of BTEX

Ion pair of cationic surfactant (cetytrimethylammonium bromide) and tungestosilicic acid incorporated in PVC matrix, was used for coating a piece of copper wire as a new high sensitive SPME fiber in extraction and determination of BTEX compounds from the headspace of water samples prior to GC/FID analysis. Under optimum extraction conditions, limits of detection for benzene, toluene, ethylbenzene, p-xylene, m-xylene and o-xylene were found to be 1.18, 5.61, 0.87, 0.29, 0.22 and 0.33 ng L(-1) respectively. Low detection limits, wide linear dynamic ranges, good reproducibility (RSD% 1.48-4.27), high fiber capacity and high mechanical durability are some of the most important advantages of the new fiber.     

钙离子对表面活性剂单层膜聚集结构的影响

采用分子动力学模拟研究了气液界面上钙离子对阴离子表面活性剂十二烷基苯磺酸钠单层膜聚集结构的影响.结果表明,单层膜结构与表面覆盖度及Ca2＋离子存在与否均有关系.Ca2＋离子能够压缩表面活性剂极性头使聚集结构排列更加紧密,均力势体现了Ca2＋离子与极性头之间的结合能力强弱,二者之间的相互作用与稳定的溶剂分离极小值有关,而Ca2＋离子需要克服一个溶剂能障才能与之发生相互作用,并引起极性头周围水分子结构的重排.模拟表明,分子动力学方法可以在分子水平上研究无机盐离子对表面活性剂单层膜水化结构的影响,解释无机盐离子在界面膜中的动力学行为.     

A second-order phase transition in a monolayer of rectangle particles

Summary To describe the surface pressure-area isotherms of monolayers of amphiphilic molecules a two-dimensional gas of rectangular particles is proposed. Using theZwanzig's simplication of theOnsager's virial expansion analysis we found a second-order transition. Then introducing attractive potentials of different shapes, surrounding the hard core we may change the position of the critical points. The calculated isotherms have similar profiles than those obtained experimentally. With the more refined potential well, this depending on the area overlap of the wells, the interaction parameters have the same order of magnitude than those given in the literature. It is shown that this orientational transition is obtained only with particles which are asymmetrical enough.On leave from UER Pluridisciplinaire de Luminy Université d'Aix-Marseille II.     

Photoinduced phase separation and miscibility in the condensed phase of a mixed Langmuir monolayer

We report our studies on the mixed Langmuir monolayer of mesogenic molecules, p-(ethoxy)-p-phenylazo phenyl hexanoate (EPPH) and octyl cyano biphenyl (8CB), employing the techniques of surface manometry and Brewster angle microscopy. Our studies show that the mixed monolayer exhibits higher collapse pressures for certain mole fractions of EPPH in 8CB as compared to individual monolayers. Also, a considerable reduction in the area per molecule is seen in the mixed monolayer, indicating a condensed phase. We have also studied the photostability of the mixed monolayer at different initial surface pressures. The mixed monolayer, under alternate cycles of UV and visible illumination, exhibits changes in surface pressures. This is due to the photoinduced transformation of EPPH isomers in the mixed monolayer. Our in-situ Brewster angle microscope studies for 0.5 mole fraction of EPPH in 8CB show a phase separation in the UV and a miscible phase in the visible, at low surface pressures ( approximately 5 mN/m). At higher surface pressures ( approximately 10 mN/m), under UV illumination, we find a phase separation which does not revert to a miscible phase under visible illumination.     

Freeze fracture direct imaging of a viscous surfactant mesophase

Freeze fracture direct imaging (FFDI) has been used to image microstructures present in a highly viscous four-component mesophase containing water, isooctane, AOT [bis(2-ethylhexyl) sodium sulfosuccinate], and lecithin. As water is added to a fixed amount of a ternary solution of isooctane and the two surfactants, the microstructure evolves from a water-in-oil microemulsion, to a highly viscous columnar hexagonal, and then to multilamellar vesicles. Each of these microstructures is imaged directly. Previous small-angle neutron scattering measurements have identified the lamellar phase, but the FFDI technique demonstrates that these are onionlike curved multilamellar structures rather than planar bilayers. Freeze fracture direct imaging expands the range of cryo-transmission microscopy to highly viscous, high-organic-content systems that typically have been difficult to visualize.     

Infrared detection of a phenylboronic acid terminated alkane thiol monolayer on gold surfaces

Polarization modulation infrared reflectance absorption spectroscopy (PM-IRRAS) and infrared reflectance absorption spectroscopy (IRRAS) have been used to characterize the formation of a self-assembled monolayer of N-(3-dihydroxyborylphenyl)-11-mercaptoundecanamide) (abbreviated PBA) on a gold surface and the subsequent binding of various sugars to the PBA adlayer through the phenylboronic acid moiety to form a phenylboronate ester. Vibrationally resonant sum frequency generation (VR-SFG) spectroscopy confirmed the ordering of the substituted phenyl groups of the PBA adlayer on the gold surface. Solution FTIR spectra and density functional theory were used to confirm the identity of the observed vibrational modes on the gold surface of PBA with and without bound sugar. The detection of the binding of glucose on the gold surface was confirmed in part by the presence of a C-O stretching mode of glucose and the observed O-H stretching mode of glucose that is shifted in position relative to the O-H stretching mode of boronic acid. An IR marker mode was also observed at 1734 cm(-1) upon the binding of glucose. Additionally, changes in the peak profile of the B-O stretching band were observed upon binding, confirming formation of a phenylboronate ester on the gold surface. The binding of mannose and lactose were also detected primarily through the IR marker mode at approximately 1736 to 1742 cm(-1) depending on the identity of the bound sugar.     

Hydrocarbon chain conformation in an intercalated surfactant monolayer and bilayer

Cetyl trimethyl ammonium (CTA) ions have been confined within galleries of layered CdPS₃ at two different grafting densities. Low grafting densities are obtained on direct intercalation of CTA ions into CdPS₃ to give Cd_0.93PS₃(CTA)_0.14. Intercalation occurs with a lattice expansion of 4.8 ? with the interlamellar surfactant ion lying flat forming a monolayer. Intercalation at higher grafting densities was effected by a two-step ion-exchange process to give Cd_0.83PS₃(CTA)_0.34, with a lattice expansion of 26.5 ?. At higher grafting densities the interlamellar surfactant ions adopt a tilted bilayer structure.¹³C NMR and orientation-dependent IR vibrational spectroscopy on single crystals have been used to probe the conformation and orientation of the methylene ‘tail’ of the intercalated surfactant in the two phases. In the monolayer phase, the confined methylene chain adopts an essentially all-trans conformation with most of the trans chain aligned parallel to the gallery walls. On lowering the temperature, molecular plane aligns parallel, so that the methylene chain lies flat, rigid and aligned to the confining surface. In the bilayer phase, most bonds in the methylene chain are in trans conformation. It is possible to identify specific conformational sequences containing a gauche bond, in the interior and termini of the intercalated methylene. These high energy conformers disappear on cooling leaving all fifteen methylene units of the intercalated cetyl trimethyl ammonium ion in trans conformational registry at 40 K.     

XAS study of a metal-induced phase transition by a microbial surfactant

The metal-induced micelle-to-vesicle phase change that the ferric complex of the microbially produced amphiphile, marinobactin E (M(E)), undergoes has been investigated by X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS). Marinobactin E is one member of the suite of siderophores, marinobactins A-E, that are used by the source bacterium to facilitate iron acquisition. Fe(III)-M(E) undergoes a micelle-to-multilamellar vesicle transition in the presence of Cd(II) and Zn(II). XRD measurements indicate the interlamellar repeat distance of the Cd(II)- and Zn(II)-induced multilamellar vesicles is approximately 5.3 nm. XAS spectra of the sedimented Cd(II)- and Zn(II)-induced multilamellar vesicles suggests hexadentate coordination of Cd(II) and Zn(II) consisting of two monodentate carboxylate ligands and four water ligands. This coordination environment supports the hypothesis that Cd(II) and Zn(II) bridge the terminal carboxylate moiety of two Fe(III)-M(E) headgroups, pulling the headgroups together in an arrangement that favors vesicle formation over the formation of micelles. XAS spectra of the Fe(III) center in the sedimented Cd(II)- and Zn(II)-induced vesicles confirm the anticipated six-coordinate geometry of Fe(III) by the M(E) headgroup via the two hydroxamate groups and the alpha-hydroxy amide moiety.     

Langmuir monolayer characteristics of a perfluoroaryl surfactant: 10-Perfluorobenzyl-decan-1-ol (PBD)

A surfactant containing the perfluorobenzyl moiety attached at the 10 position of decanol (10-perfluorobenzyldecan-1-ol, PBD) was synthesized and employed for Langmuir monolayer characterization, using surface pressure (π) and electric surface potential (ΔV)-mean molecular area (A) isotherms. Both static and dynamic stability experiments demonstrate that the monolayers formed by PBD are of satisfactory stability. Characteristic dendritic structures were observed with Brewster Angle Microscope (BAM) upon the whole compression up to the vicinity of collapse, where 3D crystallites appeared. The monolayer thickness is found to be comparable to the PBD molecule length. It occurs that ΔV has negative value even at large molecular areas, and decreases gradually along the compression, reaching a minimum of ca. −500 mV. Using the Helmholtz model, the apparent dipole moment was calculated upon film compression. The measurements were complemented with semi-empirical calculations involving molecular geometry optimization and dipole moment estimation.     

Variations of surfactant monolayer surface density in induced steady wave regime

Fluctuations of an insoluble surfactant concentration along the free liquid surface induced by steady surface waves are considered theoretically. The energy of a waved surface is assumed to consist of surface tension, curvature, and van der Waals energy components. Dependencies of the surface tension and the bending stiffness versus the surfactant concentration are assumed to be linear relative to some reference level. The van der Waals energy is taken in the form of interaction term for a thin film. Minimization of the total energy allows the expression for the deviations of concentration to be obtained. The distribution of a surfactant concentration relative to some reference level has been found to be periodic, with a period that is half of the wave period, and the amplitude of oscillations is a function of a wave number that is very similar to the Landau expansion of the free-energy near the critical point in phase transitions.     

Infrared spectra of urea isolated in a solid argon matrix

Pure monomeric urea molecules, free of contamination with decomposition products, have been obtained by sublimation of solid urea at ca 30°C and isolating in argon at ca 10K. Very high dilution is required to obtain the pure monomer which shows many spectral features different from that previously reported by King [Spectrochim. Acta28A, 165 (1972)]. The i.r. spectrum of the deutero-analogue has also been measured.