Schlieren成像和声场可视化

Schlieren技术是利用声场引起透明媒质光折射率的变化而实现声场可视化的光学成像技术。它具有对声场无干扰、快速、瞬态成像的特点。本文利用二维光学Fourier变换分析了Schlieren技术的成像原理,在采用连续激光和高速ICCD的Schlieren成像系统中,实验研究了平面波声场和线聚焦声场中换能器光学校准方法和声压的定量检测技术。发展声场瞬态和动态成像技术,观测了声波的聚焦过程和固-液界面的声场分布和变化。这些结果表明Schlieren技术是一种有效的声场可视化和定量检测的光学成像技术。     

基于声发射的光学元件损伤监测方法研究

光学元件损伤是限制激光通量水平提高的重要因素之一。为快速、准确地检测光学元件损伤是否产生,支撑光学元件循环修复策略的使用,研究并提出了基于声发射技术的光学元件损伤检测方法,通过研究光学元件损伤产生的声发射信号特征,判断光学元件是否发生损伤,使用一种基于二次相关和相关峰精确插值（FICP）的时延估计算法,通过仿真验证了该算法的可行性,结合时差定位原理建立了损伤位置求解方法,并通过实验进行了验证。研究结果表明:该方法能从监测信号中快速地获得损伤的位置估计,其平均定位误差为8.61 mm,计算时间为0.143 s/次,对大口径光学元件的损伤在线监测具有应用潜力。     

Optoacoustic solitons in Bragg gratings

Optical gap solitons, which exist due to a balance of nonlinearity and dispersion due to a Bragg grating, can couple to acoustic waves through electrostriction. This gives rise to a new species of "gap-acoustic" solitons (GASs), for which we find exact analytic solutions. The GAS consists of an optical pulse similar to the optical gap soliton, dressed by an accompanying phonon pulse. Close to the speed of sound, the phonon component is large. In subsonic (supersonic) solitons, the phonon pulse is a positive (negative) density variation. Coupling to the acoustic field damps the solitons' oscillatory instability, and gives rise to a distinct instability for supersonic solitons, which may make the GAS decelerate and change direction, ultimately making the soliton subsonic.     

Temporal analysis of tissue displacement induced by a transient ultrasound radiation force

One of the stress sources that can be used in dynamic elastography imaging methods is the acoustic radiation force. However, displacements of the medium induced by this stress field are generally not fully understood in terms of spatial distribution and temporal evolution. A model has been developed based on the elastodynamic Green's function describing the different acoustic waves generated by focused ultrasound. The function is composed of three terms: two far-field terms, which correspond to a purely longitudinal compression wave and a purely transverse shear wave, and a coupling near-field term which has a longitudinal component and a transverse component. For propagation distances in the shear wavelength range, the predominant term is the near field term. The displacement duration corresponds to the propagation duration of the shear wave between the farthest source point and the observation point. This time therefore depends on the source size and the local shear modulus of the tissue. Evolution of the displacement/time curve profile, which is directly linked to spatial and temporal source profiles, is computed at different radial distances, for different durations of force applications and different shear elastic coefficients. Experimental results performed with an optical interferometric method in a homogeneous tissue-mimicking phantom agreed with the theoretical profiles.     

Nonperturbing measurements of spatially distributed underwater acoustic fields using a scanning laser Doppler vibrometer

Localized changes in the density of water induced by the presence of an acoustic field cause perturbations in the localized refractive index. This relationship has given rise to a number of nonperturbing optical metrology techniques for recording measurement parameters from underwater acoustic fields. A method that has been recently developed involves the use of a Laser Doppler Vibrometer (LDV) targeted at a fixed, nonvibrating, plate through an underwater acoustic field. Measurements of the rate of change of optical pathlength along a line section enable the identification of the temporal and frequency characteristics of the acoustic wave front. This approach has been extended through the use of a scanning LDV, which facilitates the measurement of a range of spatially distributed parameters. A mathematical model is presented that relates the distribution of pressure amplitude and phase in a planar wave front with the rate of change of optical pathlength measured by the LDV along a specifically orientated laser line section. Measurements of a 1 MHz acoustic tone burst generated by a focused transducer are described and the results presented. Graphical depictions of the acoustic power and phase distribution recorded by the LDV are shown, together with images representing time history during the acoustic wave propagation.     

应力各向异性下耦合三层薄膜铁磁共振

研究铁磁/铁磁/反铁磁三层薄膜中应力各向异性场对共振场的影响.得到系统存在声学和光学两种模,并且随着应力场的增强,在某些区域声学模和光学模共振场均向高值方向移动.此外发现声学模共振场对两铁磁层厚度的依赖较大,对光学模而言,随着两铁磁层厚度的改变,应力各向异性场对其共振场的影响甚微.     

交换偏置系统中的反铁磁磁化与自旋波

采用自由能变分法研究了铁磁/反铁磁双层膜系统在反铁磁层存在净磁化下的自旋波谱.本模型中铁磁薄层具有单轴磁晶各向异性和立方磁晶各向异性,反铁磁层仅具有单轴磁晶各向异性,但厚度有限,推导出了系统铁磁共振频率的表达式.结果表明：系统的自旋波谱分光学模和声学模两种,其中光学模仅在反铁磁层存在净磁化时得到激发.自旋波谱可按外磁场强度的变化情况分为强弱两支;区分强磁场和弱磁场的临界场依赖于铁磁/反铁磁间的交换作用,反铁磁层的磁化强度以及反铁磁层的厚度等.交换偏置场对光学模的影响明显于声学模,而反铁磁的净磁化和其厚度对系统的影响紧密联系,难以区分.但当反铁磁层净磁化很小可忽略时,系统只存在声学模激发. 关键词： 铁磁/反铁磁双层膜 反铁磁层净磁化 光学模 声学模     

Moire processing of acoustic field holograms

A moiré method for processing optical image-plane holograms of acoustic fields is introduced. Derivatives of acoustic pressure with respect to space, time and other system variables can be obtained by this extension of holographic interferometry methods. The new method is employed to obtain simultaneous, independent measurements of acoustic pressure and particle acceleration. It is also demonstrated that moiré processes can improve the sensitivity of optical, whole field measurements at least 30 times.     

PREDICTION OF NON-CAVITATING UNDERWATER PROPELLER NOISE

Non-cavitation noise of underwater propeller is numerically investigated. The main purpose is to analyze non-cavitation noise in various operating conditions with different configurations. The noise is predicted using time-domain acoustic analogy and boundary element method. The flow field is analyzed with potential-based panel method, and then the time-dependent pressure data are used as the input for Ffowcs Williams-Hawkings formulation to predict the farfield acoustics. Boundary integral equation method is also considered to investigate the effect of ducted propeller. Sound deflection and scattering effect on the duct is considered with the BEM. The governing equations are based on the assumption that all acoustic pressure is linear. A scattering approach is applied in which the acoustic pressure field is split into the known incident component and the unknown scattered component. Noise prediction results are presented for single propeller and ducted propeller in non-uniform flow conditions similar to real situation. The investigation reveals that the effect of a duct on the acoustic performance propeller is small in the far field under non-cavitating situations since the noise directivities of single and ducted propellers are almost the same. Only the high order BPFs are influenced by the existence of the duct.     

Detection of ultrasound-modulated photons in diffuse media using the photorefractive effect

Ultrasound-modulated optical tomography is a dual-wave sensing technique in which diffusive light in a turbid medium interacts with an imposed acoustic field. A phase-modulated photon field emanates from the interaction region and carries with it information about the optomechanical properties of the medium. We present a technique for detection of ultrasound-induced optical phase modulation using an adaptive, photorefractive-crystal-based interferometry system. Experimental results are presented demonstrating detection of ultrasound-modulated signals in highly scattering media by use of pulsed ultrasound insonation.     

Corrected Statistical Energy Analysis Model in a Non-Reverberant Acoustic Space

Statistical Energy Analysis (SEA) is a well-known method to analyze the flow of acoustic and vibration energy in a complex structure. This study investigates the application of the corrected SEA model in a non-reverberant acoustic space where the direct field component from the sound source dominates the total sound field rather than a diffuse field in a reverberant space which the classical SEA model assumption is based on. A corrected SEA model is proposed where the direct field component in the energy is removed and the power injected in the subsystem considers only the remaining power after the loss at first reflection. Measurement was conducted in a box divided into two rooms separated by a partition with an opening where the condition of reverberant and non-reverberant can conveniently be controlled. In the case of a non-reverberant space where acoustic material was installed inside the wall of the experimental box, the signals are corrected by eliminating the direct field component in the measured impulse response. Using the corrected SEA model, comparison of the coupling loss factor (CLF) and damping loss factor (DLF) with the theory shows good agreement.     

Measurements of harmonic profiles of a bounded ultrasonic beam in a liquid medium

The acoustic field of a bounded finite-amplitude beam is governed by competing mechanisms such as medium non-linearity, interference, and attenuation. An analytic determination of the distribution of sonic energy in the individual harmonic components is often not reliable; consequently an experimental mapping of those harmonic components may be more appropriate. An experimental method is presented here which involves a miniature hydrophone probe which has been frequency calibrated for each harmonic component using a light diffraction technique. Measurements (made across the sound field) of the acoustic amplitude of the first three harmonic components are presented.     

Analytical expressions for momentum autocorrelation function of a classic diatomic chain

We use recurrence relations method to study a classical harmonic diatomic chain. The momentum autocorrelation function results from contributions of acoustic and optical branches. By use of convolution theorem, analytical expressions for the acoustic and optical branches are derived as even-order Bessel function expansions. The expansion coefficients are given in terms of integrals of real and complex elliptic functions for the acoustic and optical branches, respectively. Double convolution results respectively in integrals of trigonometric and hyperbolic functions for expansion coefficients of acoustic and optical branches.     

Conversion of unpolarized light to polarized light with greater than 50% efficiency by photorefractive two-beam coupling

All known polarizers operate through a separation of orthogonal electric field components, one of which is subsequently discarded. As a result, 50% of the unpolarized incident light is wasted in the process of conversion to polarized light. We demonstrate a new method by which we use the optical power in the ordinarily discarded component as the pump to amplify the retained component through photorefractive two-beam coupling to achieve greater than 50% throughput.     

二维极化子在磁场中的基态能量

谐振子算符的代数运算方法被用于研究磁场中同时与表面光学声子及表面声学声子相互作用的二维电子。得到二维极化子在强磁场中直至四级微扰的基态能量以及它在任意强经磁场中的二级微扰基态能量表达式。结果发现,对磁场中二维极化子基态能量的影响中,表面声学声子有着与表面光学声子同样的甚至更为突出的贡献,是不容忽视的。 关键词：     

Acoustic reconstruction of the velocity field in a furnace using a characteristic flow model

An acoustic method can provide a noninvasive, efficient and full-field reconstruction of aerodynamic fields in a furnace. A simple yet reasonable model is devised for reconstruction of a velocity field in a cross section of a tangential furnace from acoustic measurements based on typical physical characteristics of the field. The solenoidal component of the velocity field is modeled by a curved surface, derived by rotating a curve of Gaussian distribution, determined by six characteristic parameters, while the nonrotational component is governed by a priori knowledge. Thus the inverse problem is translated into determination of the characteristic parameters using a set of acoustic projection data. First numerical experiments were undertaken to simulate the acoustic measurement, so as to preliminarily validate the effectiveness of the model. Based on this, physical experiments under different operating conditions were performed in a pilot-scale setup to provide a further test. Hot-wire anemometry and strip floating were applied to compare with acoustic measurements. The acoustic measurements provided satisfactory consistency with both of these approaches. Nevertheless, for a field with a relatively large magnitude of air velocities, the acoustic measurement can give more reliable reconstructions. Extension of the model to measurements of hot tangential furnaces is also discussed.     

Extraction of the acoustic component of a turbulent flow exciting a plate by inverting the vibration problem

An improvement of the Force Analysis Technique (FAT), an inverse method of vibration, is proposed to identify the low wavenumbers including the acoustic component of a turbulent flow that excites a plate. This method is a significant progress since the usual techniques of measurements with flush-mounted sensors are not able to separate the acoustic and the aerodynamic energies of the excitation because the aerodynamic component is too high. Moreover, the main cause of vibration or acoustic radiation of the structure might be due to the acoustic part by a phenomenon of spatial coincidence between the acoustic wavelengths and those of the plate. This underlines the need to extract the acoustic part. In this work, numerical experiments are performed to solve both the direct and inverse problems of vibration. The excitation is a turbulent boundary layer and combines the pressure field of the Corcos model and a diffuse acoustic field. These pressures are obtained by a synthesis method based on the Cholesky decomposition of the cross-spectra matrices and are used to excite a plate. Thus, the application of the inverse problem FAT that requires only the vibration data shows that the method is able to identify and to isolate the acoustic part of the excitation. Indeed, the discretization of the inverse operator (motion equation of the plate) acts as a low-pass wavenumber filter. In addition, this method is simple to implement because it can be applied locally (no need to know the boundary conditions), and measurements can be carried out on the opposite side of the plate without affecting the flow. Finally, an improvement of FAT is proposed. It regularizes optimally and automatically the inverse problem by analyzing the mean quadratic pressure of the reconstructed force distribution. This optimized FAT, in the case of the turbulent flow, has the advantage of measuring the acoustic component up to higher frequencies even in the presence of noise.     

基于声光折射的聚焦超声焦点声压检测

提出了一种基于声光折射对聚焦超声焦点声压进行非侵入式检测的方法。当一束直径小于声波长的平行光束入射穿过聚焦超声的焦点时,通过研究焦点声压与光线偏转的具体关系,建立了光线最大偏转距离与焦点声压变化的关系模型,从而计算出焦点峰值声压。为了对理论模型进行验证,采用凹球面型聚焦换能器进行实验研究。通过与采用光纤水听器测量的结果进行对比,证明理论模型的可行性。结果表明实验得到的光斑图像与理论分析的结果一致,且用该方法测得的焦点峰值声压与光纤水听器测量的结果相比,相对误差小于15%,证明该方法具有可行性,能够定量检测焦点峰值声压。模型的提出也为将声光折射效应用于整个聚焦声场的定量检测提供了实验依据和理论依据。     

Analogical model for mechanical vibrations in flue organ pipes inferred by independent component analysis

Several experiments have been performed to investigate the mechanical vibrations associated with an organ pipe. The measurements have been made by using laser Doppler vibrometry, a well-known not-invasive optical measurement technique that is very widely used in structural dynamics. The recorded signals are analyzed by using a well-established decomposition method in time domain, i.e., independent component analysis. Asymptotic dynamics methods to recognize low-dimensional dynamic system associated with this wave field is then considered. The full-toned recorded signals appear decomposed into three independent components. The independent components are nonlinear due to the fractal dimension of the attractor. These results for the mechanic vibrational field are compared with those of the acoustic one. It is interesting to note that the two fields have many common characteristics. Finally, a low-dimensional dynamic system that reproduces the main characteristics of the mechanical wave field in the time and frequency domains is introduced.     

三维浅海环境下孤立子内波对低频声能流的传播影响

针对三维浅海环境下孤立子内波对低频声信号传播特性的影响问题,基于Oxyz坐标系下的三维浅海低频声场有限元计算方法,以声能流为研究对象,仿真分析了内波存在对低频声信号传播特性的影响规律.研究结果表明:受内波影响,在xOz平面,声能流垂直分量的传播偏转角度呈现周期性的起伏规律;随着声源深度的增加,内波对声能流偏转角度的影响...