The spectrophotometric determination of vanadium after extraction as vanadium(III) ferronate by tribenzylamine

Vanadium(III) obtained by dithionite reduction of vanadium(V) can be extracted as its ferron complex with tribenzylamine in chloroform from 0.05 M sulphuric acid. Vanadium (0–5 μg ml^-1) is determined spectrophotometrically at 430 nm with a sensitivity of 0.0028 μg V cm^-2. Al(III), Co(II), Ni(II), Fe(II, III), Hg(II), Si(IV), Be(II), Mg(II), Ca(II), Sr(II), Ba(II), Cr(VI, III), W(VI), Zn(II), U(VI), Mn(II). Pb(II), Cu(II), Cd(II) and Th(IV) do not interfere; only Mo(VI), Ti(IV), Zr(IV). Bi(V) and Sn(II) interfere. A single determination takes only 7 min. The extracted complex is V^III (R-3H.TBA)₃ where R = C₉H₄O₄NSI. The method is satisfactory for the determination of vanadium in steels, alum and other samples without preliminary separations.     

The oxophilicity of vanadium in unsaturated homoleptic binuclear vanadium carbonyl structures

Density functional theory has been used to explore molecular structures of possible homoleptic binuclear vanadium carbonyls V₂(CO)_n (n = 12, 11, 10, 9, and 8) with the pure DFT method BP86. Octahedral or nearly octahedral V(CO)₆ units, similar to the known monomeric V(CO)₆, are found to be fundamental building blocks in the lowest energy structures of the homoleptic binuclear vanadium carbonyls V₂(CO)_n (n = 12, 11, 10, and 9). A V(CO)₆ unit often links to a second V(CO)_n unit to form the binuclear vanadium carbonyl through one or two four-electron donor bridging CO groups as a consequence of the oxophilicity of vanadium. Single and triple vanadium–vanadium bonds are predicted to be favored whiledouble and quadruple vanadium–vanadium bonds are avoided. An interesting structure is found for V₂(CO)₈ consisting of two V(CO)₄ units linked by a vanadium–vanadium bond short enough to be the quintuple bond required by the 18-electron rule.     

Spectrophotometric study of vanadium(V)-phenylfluorone complex

Spectrophotometric studies of the reaction between vanadium(V) ions and phenylfluorone are presented and used for spectrophotometric determination of vanadium(V). The absorbance at 520 nm obeys Beer's law in the range of 2–15 μg vanadium/10 ml at pH 4. The relative standard deviation is 2% and the molar absorptivity based on vanadium is 2.1 × 10⁴ liters/mol cm. The composition of the complex in solution is of the 1:1 type with stability constant values to 2.5 × 10⁴. Analysis of the solid complex shows that its formula agrees with the formula (C₁₉ H₁₁ O₅)VO₂ · 5H₂O.     

Speciation of vanadium in soil

A method for speciation of vanadium in soil is presented in this work. The sequential extraction analysis procedure of Tessier et al. for heavy metals was used for the vanadium separation. The method consists of sequential leaching of the soil samples to separate five fractions of metals: (1) exchangeable, (2) bound to carbonates, (3) bound to Fe-Mn oxides, (4) bound to organic matter and (5) residual. The leaching solutions of Tessier were used for the vanadium extraction, only for the residual fraction the HClO₄ was replaced with H₂SO₄. The optimum conditions for leaching of vanadium from soil (weight of sample, concentration and volume of extractants, time of extraction) were chosen for each fraction. A sensitive, spectrophotometric method based on the ternary complex V(IV) with Chrome Azurol S and benzyldodecyldimethylammonium bromide (ε=7.1×10⁴ l mol⁻¹ cm⁻¹) was applied for the vanadium determination after separation of V(V) by solvent extraction using mesityl oxide and reduction of V(V) using ascorbic acid. This method was applied for vanadium speciation in soil from two different regions of Poland: Upper Silesia (industrial region) and Podlasie (agricultural region). The content of vanadium in the fractions of Upper Silesia soil was respectively (in 10⁻³%): I, 3.39; III, 4.53; IV, 10.70; V, 8.70 and it was the highest in the organic fraction, indicating input by anthropogenic activities. The content of vanadium in Podlasie soil was clearly lower and it was (in 10⁻³%): I, 2.07; III, 0.92; IV, 0.69; V, 1.23. The concentration of vanadium in fraction 2 of both soils was less than detection limit of applied method. The total content of vanadium in the five soil fractions was in good correlation with the total content of this element in both soils found after HF-H₂SO₄ digestion. Analysis using the ICP-AES method gave comparable results.     

Magnetic ion imprinted polymer nanoparticles for the preconcentration of vanadium(IV) ions

An ion imprinted polymer coated onto magnetite (Fe₃O₄) nanoparticles is shown to be a useful magnetic sorbent for the fairly selective preconcentration of vanadium. The sorbent was prepared by radical copolymerization of 3-(triethoxysilyl)propyl methacrylate (the monomer), ethylene glycol dimethacrylate (the cross-linker), and the vanadium(IV) complex of 1-(2-pyridylazo-2-naphthol) in the presence of magnetite nanoparticles. The material was characterized by IR spectroscopy, scanning electron microscopy, and thermal analysis. The vanadium(IV) ions were removed from the imprint by a solution containing thiourea and HCl, and the eluent was submitted to AAS. The analytical efficiency and relative standard deviation are 99.4 and ±2.3 %, respectively, under optimum conditions, and the limit of detection is 20 ng mL^?1. The method was successfully applied to the preconcentration and determination of vanadium(IV) ions in crude oil. Figure

An ion imprinted polymer is coated on to magnetite nanoparticles as a useful magnetic sorbent for the fairly selective preconcentration of vanadium which can be used for vanadium determination in crude oil.     

Spectrophotometric determination of vanadium as vanadium(IV) pyridine thiocyanate

A spectrophotometric determination of vanadium as vanadium(IV) pyridine thiocyanate is described. The blue complex is formed in acidic aqueous solution and extracted into pyridine-chloroform. Absorbance is measured at 7.40 mμ. The range of best accuracy for 1-cm cells is from about 80 to 240 μg of vanadium per ml, and sensitivity is 0.4 μg of vanadium per cm² at 7.40 mμ. The vanadium may be present initially as vanadium(IV) or vanadium(V), which is reduced to vanadium(IV) by the large excess of thiocyanate ion added. Several elements interfere in the determination ; a separation procedure involving mercury cathode electrolysis is suggested.     

Sur la preparation du difluorure de vanadium VF2

Two new preparation methods of vanadium (+II) fluoride are discussed:VF₂ is obtained by action of vanadium metal on VF₃ or substitution of chlorine by fluorine in VCl₂. The later method gives very pure VF₂ at relatively low temperature.     

Determination of trace vanadium in natural waters by a combined ion exchange—catalytic photometric method

A sensitive, selective and simple method is described for the determination of trace vanadium in natural waters. Vanadium is separated and concentrated by a combined cation- and anion-exchange procedure in 0.05 M HCl—0.1 % H₂O₂ media, and determined by the catalytic method based on the oxidation of gallic acid by bromate. The proposed method is applied to the analysis of natural waters. The relative standard deviations are 3.9 % for 0.8 p.p.b. of vanadium in river water and 3.2 % for 1.9 p.p.b. of vanadium in lake water (surface). As little as 0.03 p.p.b. of vanadium can be determined in samples of 100 ml or less.     

Magnetic ion imprinted polymer nanoparticles for the preconcentration of vanadium(IV) ions

An ion imprinted polymer coated onto magnetite (Fe₃O₄) nanoparticles is shown to be a useful magnetic sorbent for the fairly selective preconcentration of vanadium. The sorbent was prepared by radical copolymerization of 3-(triethoxysilyl)propyl methacrylate (the monomer), ethylene glycol dimethacrylate (the cross-linker), and the vanadium(IV) complex of 1-(2-pyridylazo-2-naphthol) in the presence of magnetite nanoparticles. The material was characterized by IR spectroscopy, scanning electron microscopy, and thermal analysis. The vanadium(IV) ions were removed from the imprint by a solution containing thiourea and HCl, and the eluent was submitted to AAS. The analytical efficiency and relative standard deviation are 99.4 and ±2.3 %, respectively, under optimum conditions, and the limit of detection is 20 ng mL⁻¹. The method was successfully applied to the preconcentration and determination of vanadium(IV) ions in crude oil.

An ion imprinted polymer is coated on to magnetite nanoparticles as a useful magnetic sorbent for the fairly selective preconcentration of vanadium which can be used for vanadium determination in crude oil.

     

Analytical applications of picolinealdehyde salicyloylhydrazone: II. Extraction and spectrophotometric determination of vanadium(V)

Picolinealdehyde salicyloylhydrazone reacts with vanadium(V) to produce a yellow 1:1 complex (λ_max = 400 nm, ? = 2.17 × 10⁴ liters · mol^?1 cm^?1) in aqueous ethanolic solution. The yellow complex can be extracted into chlorobenzene (λ_max = 425 nm, ? = 2.16 × 10⁴ liters · mol^?1 cm^?1) and used for the spectrophotometric determination of trace amounts of vanadium. Interferences have been investigated. The method has been applied to the determination of vanadium in steel and in lead concentrates.     

Simultaneous determination of cobalt,copper, iron and vanadium in crude petroleum oils by HPLC

Summary A method has been developed for the simultaneous formation and solvent extraction of cobalt (II), copper (II), iron (II) and vanadium (IV) complexes of bis (acetylpivalylmethane)ethylenediamine (H₂APM₂en) in methyl isobutyl ketone. The complexes are eluted from a reversed phase HPLC column with a mixture of methanol:water:acetonitrile and detection was at 260 nm. The method has been applied to the simultaneous determination of cobalt, copper, iron and vanadium in crude petroleum oils at the ng level.     

Characterisation and thermal analysis of vanadium(II) oxalate

The synthesis, compositional formula and mode of thermal decomposition of a compound for which there existed only a single literature reference [1] have been investigated in this work.The product of the aqueous phase reaction between vanadium(II) ions and oxalate ions at lowpH has been identified: vanadium(II) oxalate dihydrate, VC₂O₄·2H₂O, has been characterised by thermal methods of analysis supported by a range of complementary analytical techniques.The findings of a previous author [1] have been confirmed and extended in this work. In addition, a synthetic procedure for the preparation of gram quantities of vanadium(II) oxalate dihydrate, VC₂O₄·2H₂O, is reported here for the first time.The oxalate compound prepared was found to be remarkably stable in relation to aerial oxidation, unlike other representative solid state compounds of the vanadium(II) oxidation state. Vanadium(II) oxalate dihydrate may, therefore, serve as an important intermediate in the future synthesis of other vanadium(II) compounds.We would wish to thank Mr. S. Sutcliffe, University College Salford, for providing the Thermal Analysis data and also Mr. S. Unsworth, Magnesium Electron, Clifton, Manchester, for providing the XRD data.     

Applications involving oxidation with KBrO3: III. Rapid potentiometric methods for vanadium alone or in mixtures

A rapid and reliable method is given for the determination of vanadium based on oxidation of the V(IV) with a known excess of bromate to V(V). The unreacted oxidant as well as V(V) are subsequently reduced with sulfurous acid to V(IV). The resulting Br^?1 was potentiometrically titrated with Hg(I) using silver amalgam as the indicator electrode. The method finds application to the analysis of some binary and ternary mixtures.     

Atomic-absorption determination of vanadium and molybdenum in tap water and mineral waters after anion-exchange separation.

A method is described for the determination of vanadium and molybdenum in samples of tap and bottled mineral water. After acidification with citric acid the water sample is heated to about 80°C to remove CO₂; sodium citrate and ascorbic acid are added and the resulting solution of pH 3 is passed through a column of the strongly basic anion-exchange resin Dowex 1-X8 (citrate form) on which both vanadium and molybdenum are adsorbed as anionic citrate complexes. Vanadium is eluted with 6 M hydrochloric acid; molybdenum is recovered with 2 M perchloric acid-1 M hydrochloric acid. Vanadium and molybdenum are determined in the eluates by atomic-absorption spectrometry. The samples analysed contained 0.1–0.9 μg l^?1 vanadium and 0.2–13 μg l^?1 molybdenum.     

Heptacoordinated vanadium: Preparation and structure of hexacarbonyl(trimethylstannio)vanadium (Sn—V)

The new complex Me₃SnV(CO)₆ is obtained from TlV(CO)₆ and Me₃SnI in 1,2-C₂H₄Cl₂. Crystals of this complex are composed of molecules Me₃SnV(CO)₆ with heptacoordinated vanadium and a Sn-V bond length of 293.90(6) pm. The molecules possess crystallographic mirror symmetry and approximateC _3v symmetry. The crystal structure determination revealed a remarkable end-for-end orientational disorder in the molecular lattice.Dedicated to Professor Dr. W. Bronger at the occasion of his 60th birthday on July 2nd, 1992.     

Spectrophotometric determination of vanadium in petroleum crudes and derivatives

The spectrophotometric study of the complexation reaction between 5,5′methylenedisalicylhydroxamic acid and V(V) shows that two complexes are formed, the 1:1 (? = 5100 liters mol^?1 cm^?1 at 490 nm, log K_est = 5.8 ± 0.1) and the 1:2 (L:V) (? = 6250 liters mol^?1 cm^?1 at 600 nm, log K_est = 6.1 ± 0.1). A spectrophotometric method is developed for the determination of vanadium (2–9 ppm) at 2 N HCl and 495 nm, which allows its determination in petroleum crude oils with a series of advantages over the ASTM D-1548-63 method.     

Automated stopped-in-dual-loop flow analysis system for catalytic determination of vanadium in drinking water

An automated stopped-in-dual-loop flow analysis (SIDL-FA) system is proposed for the determination of vanadium in drinking water. The chemistry is based on the vanadium-catalyzed oxidation reaction of p-anisidine by bromate in the presence of Tiron as an activator to produce a dye (λ_max = 510 nm). A SIDL-FA system basically consists of a selection valve, three pumps (one is for delivering of standard/sample, and others are for reagents), two six-way injection valves, a spectrophotometric detector and a data acquisition device. A 100-μL coiled loop around a heated device is fitted onto each six-way injection valve. A well-mixed solution containing reagents and standard/sample is loaded into the first loop on a six-way valve, and then the same solution is loaded into the second loop on another six-way valve. The solutions are isolated by switching these two six-way valves, so that the catalytic reaction can be promoted. The net waste can be zero in this stage, because all pumps are turned off. Then each resulting solution is dispensed to the detector with suitable time lag. A touchscreen controller is developed to automatically carry out the original SIDL-FA protocol. The proposed SIDL-FA method allows vanadium to be quantified in the range of 0.1-2 μg L⁻¹ and is applied to the determination of vanadium in drinking water samples.     

Determination of vanadium by atomic absorption spectrophotometry

Methods for the determination of vanadium, in the range 0.5–100 mg/l, by atomic absorption spectroscopy in an oxy-acetylene as well as in a nitrous oxideacetylene flame are presented. For use with oxy-acetylene flames, vanadium is extracted as vanadium cupferrate into a mixture of methyl isobutyl ketone and oleic acid (78:22, v/v) and the organic phase is aspirated to the flame. The sensitivity is 0.7 mg/l of vanadium in the organic phase. For nitrous oxide-acetylene flames, an aqueous solution of vanadium is aspirated directly. The sensitivity is further improved by the use of methyl isobutyl ketone, the addition of Al³⁺ and diethylene glycol diethyl ether. Many potential interferences were examined and methods to overcome those found are given.     

Some vanadium(V) complexes as reagents for the photometric determination of alcohols

Vanadiuin(V) com: with an acidic hydroxy group attached to the metal form the crorrresponding.; with alcohols. These esters show a characteristic absorption at 445–480 that alcoholic hydroxy groups can be determined photometrically. The formation constant of the n-butanol esters of vanadium maltolate and 2-methyl-.S-hydroxyquinolinate Were determined in benzene or benzenechloroform (1:1). Simple methods are determined for the determination of alcohol in the concentration range 10^-1–10^-4M.     

Interaction of vanadium(III) with imidazole carboxylic acids

Complex formation between vanadium(III) and several imidazole carboxylic derivatives (urocanic acid, imidazole-4-carboxylic and imidazole-4,5-dicarboxylic acid) was studied using pH-potentiometric and spectroscopic (UV–Vis absorption and fluorescence) methods. The results show that urocanic acid is a weak ligand in aqueous solution and hydrolysis of vanadium(III) effectively competes with the complexation processes. Imidazole mono and di-carboxylate are relatively stronger donor (N,O) ligands and are able to prevent, to some degree, the hydrolysis processes. The main complex species in the vanadium(III)–imidazole-4,5-dicarboxylic acid system is the dinuclear μ-oxo bridged V₂OL₂ species.