Investigation of the magnetic properties and magnetic structure parameters of nanocrystalline Fe<Subscript>79</Subscript>Zr<Subscript>10</Subscript>N<Subscript>11</Subscript> films

The magnetic properties (magnetization curve, ferromagnetic resonance spectrum) of nanocrystalline Fe₇₉Zr₁₀N₁₁ films obtained by RF magnetron sputtering with subsequent annealing were studied experimentally, along with the fundamental magnetic constants of these films (saturation magnetization M _S, local magnetic anisotropy energy K, and the exchange coupling constant A). The magnetic properties are discussed within the random magnetic model, which determines the correlation of the magnetic properties with the fundamental magnetic constants and nanostructure parameters (grain size, magnetic anisotropy, and correlation radius R _C). The exchange correlation length 2R _L for the film magnetic microstructure was determined by correlation magnetometry.     

Solid-state reactions in Ga/Mn thin films: Formation and magnetic properties of the ϕ-Ga<Subscript>7.7</Subscript>Mn<Subscript>2.3</Subscript> phase

Experimental results concerning the solid-state synthesis of the ϕ-Ga_7.7Mn_2.3 phase in Ga/Mn thin films are presented. A ferromagnetic (or ferrimagnetic) state is observed in the samples annealed at temperatures above 250°C. The X-ray diffraction studies demonstrate the formation of the ϕ-Ga_7.7Mn_2.3 phase, which is poly-crystalline being grown on glass substrates and exhibits the preferential cube-on-cube orientation on MgO(001) substrates. A strong dependence of the perpendicular anisotropy constant K _⊥ and of the effective biaxial anisotropy constant K ₁^eff on the magnetic field H has been found. Owing to such dependence, the easy axis of magnetization lying in the plane of the film changes its direction approaching the film normal when the increasing magnetic field exceeds 8 kOe. The anomalous behavior of K _⊥ and K ₁^eff constants is explained both by the in-plane stresses arising in the course of the formation of the ϕ-Ga_7.7Mn_2.3 phase and by the direct dependence of magnetostriction constants on the magnetic field. For the ϕ-Ga_7.7Mn_2.3 phase, the saturation magnetization M _S has been determined and the first magnetocrystalline anisotropy constant K ₁ has been estimated.     

Anisotropy and dynamic properties of Co2MnGe Heusler thin films

Co₂MnGe films of 30 and 50 nm in thickness were grown by RF-sputtering. Their magnetic anisotropies, dynamic properties and the different excited spin wave modes have been studied using conventional ferromagnetic resonance (FMR) and Microstrip line FMR (MS-FMR). From the in-plane and the out-of-plane resonance field values, the effective magnetization (4πM_eff) and the g-factor are deduced. These values are then used to fit the in-plane angular-dependence of the uniform precession mode and the field-dependence of the resonance frequency of the uniform mode and the first perpendicular standing spin wave to determine the in-plane uniaxial, the four-fold anisotropy fields, the exchange stiffness constant and the magnetization at saturation. The samples exhibit a clear predominant four-fold magnetic anisotropy besides a smaller uniaxial anisotropy. This uniaxial anisotropy is most probably induced by the growth conditions.     

Magnetization reversal in Fe48Pt34B34 magnetic foils

Exchange-spring magnet L1-FePt/(Fe₂B+α-Fe) is fabricated by flash annealing a melt-spun Fe₄₈Pt₃₄B₃₄ foil. A coercivity of 8500 Oe (1 Oe = 79.5775 A/m), squareness (M_r/M_s) of 0.70, saturation magnetization of 10.2 kGs (1 Gs = 10^-4 T) and an effective anisotropy K_eff =2.0 × 10⁷ ergs/cm³ are obtained. A two-step magnetization reversal feature is characterized in this paper. An exchange bias phenomenon is also observed in a low saturation field.     

Temperature dependence of magnetic properties of NiFe2O4 nanoparticles embeded in SiO2 matrix

Spinel ferrite NiFe₂O₄ nanoparticles (?25 nm) in SiO₂ matrix were prepared by sol–gel method. The phase and average crystallite size of the samples were determined by X-ray diffraction method and the particle size distributions were studied by a transmission electron microscope. Magnetic properties of the samples were investigated with different ferrite particle sizes and at various temperatures down to 10 K. Superparamagnetic properties were observed at room temperature when the particle size is less than 10 nm.In superparamagnetic state, the field dependence of magnetization follows Langevin function which was originally developed for paramagnetism. The effective anisotropy constant K_eff is found to increase significantly with the decrease in particle volume and an order of magnitude higher than that of the bulk samples when the particle size is below 5 nm due to the dominance of surface anisotropy. In case of nanosized systems, the effect of size reduction on the law of approach to saturation has also been studied in detail.     

Crystal structural, magnetic and electrical transport properties of CeKFeMoO6 double perovskite

The crystal structural, magnetic and electrical transport properties of double perovskite CeKFeMoO₆ have been investigated. The crystal structure of the compound is assigned to the monoclinic system with space group P2₁/n and its lattice parameters are a=0.55345(3) nm, b=0.56068(2) nm, c=0.78390(1) nm, β=89.874(2). The divergence between zero-field-cooling and field-cooling M-T curves demonstrates the anisotropic behavior. The Curie temperature measured from C_p-T curve is about 340 K. Isothermal magnetization curve shows that the saturation and spontaneous magnetization are 1.90 and 1.43 μ_B/f.u. at 300 K, respectively. The electrical behavior of the sample shows a semiconductor. The electrical transport behavior can be described by variable range hopping model. Large magnetoresistance, −0.88 and −0.18, can be observed under low magnetic field, 0.5 T, at low and room temperature, respectively.     

Finite size and surface effects on the magnetic properties of cobalt ferrite nanoparticles

Cobalt ferrite, CoFe₂O₄, nanoparticles in the size range 2–15 nm have been prepared using a non-aqueous solvothermal method. The magnetic studies indicate a superparamagnetic behavior, showing an increase in the blocking temperatures (ranging from 215 to more than 340 K) with the particle size, D _TEM. Fitting M versus H isotherms to the saturation approach law, the anisotropy constant, K, and the saturation magnetization, M _S, are obtained. For all the samples, it is observed that decreasing the temperature gives rise to an increase in both magnetic properties. These increases are enhanced at low temperatures (below ~160 K) and they are related to surface effects (disordered magnetic moments at the surface). The fit of the saturation magnetization to the T ² law gives larger values of the Bloch constant than expected for the bulk, increasing with decreasing the particle size (larger specific surface area). The saturation magnetization shows a linear dependence with the reciprocal particle size, 1/D _TEM, and a thickness of 3.7 to 5.1 Å was obtained for the non-magnetic or disordered layer at the surface using the dead layer theory. The hysteresis loops show a complex behavior at low temperatures (T ≤ 160 K), observing a large hysteresis at magnetic fields H > ~1000 Oe compared to smaller ones (H ≤ ~1000 Oe). From the temperature dependence of the ac magnetic susceptibility, it can be concluded that the nanoparticles are in magnetic interaction with large values of the interaction parameter T ₀, as deduced by assuming a Vogel–Fulcher dependence of the superparamagnetic relaxation time. Another evidence of the presence of magnetic interactions is the almost nearly constant value below certain temperatures, lower than the blocking temperature T _b, observed in the FC magnetization curves.     

Dynamic magnetization of <Emphasis Type="Bold">γ</Emphasis>- nanoparticles isolated in an amorphous matrix

We have studied the magnetization of a system of γ-Fe₂O₃ (0.68 vol.%) nanoparticles isolated in an SiO₂ amorphous matrix placed in an alternating magnetic field with a frequency of 640 Hz and in the temperature range of (77-300) K. Compared to temperatures closer to 300 K (where the system has a superparamagnetic behaviour), at lower temperatures, the magnetization has a dynamic hysteresis loop due to the magnetization's phase shift between the field and the magnetization. The delay of the magnetization (attributed to the Néel relaxation processes) increases with the decrease of temperature. It has been shown that the relaxation time resulting from the Néel theory is determined by an effective anisotropy constant ( K ) that takes into account the magnetocrystalline anisotropy, as well as the shape, surface and strain anisotropies. In the following we will show that the surface and strain anisotropy components have the most significant influence. When the temperature decreases from 300 to 77 K, the relative increase of the saturation magnetization of the nanoparticles is much higher than that of the (spontaneous) saturation magnetization of bulk γ-Fe₂O₃. This increase is due to the increase of the mean magnetic diameter of the particles attached to the core of aligned spins, from 10.16 nm to 11.70 nm, as a result of the modification of the superexchange interaction in the surface layer. Received 25 April 2002 / Received in final form 11 August 2002 Published online 14 February 2003 RID="a" ID="a"e-mail: ccaizer@physics.uvt.ro     

Current induced domain wall motion in nanostripes with perpendicular magnetic anisotropy

We report micromagnetic modeling results of current induced domain wall (DW) motion in magnetic devices with perpendicular magnetic anisotropy by solving the Landau-Lifschitz-Gilbert equation including adiabatic and non-adiabatic terms. A nanostripe model system with dimensions of 500 nm (L)×25 nm (W)×5 nm (H) was selected for calculating the DW motion and its width, as a function of various parameters such as non-adiabatic contribution, anisotropy constant (K_u), saturation magnetization (M_s), and temperature (T). The DW velocity was found to increase when the values of K_u and T were increased and the M_s value decreased. In addition, a reduction of the domain wall width could be achieved by increasing K_u and lowering M_s values regardless of the non-adiabatic constant value.     

Magnetic properties of half-metallic semi Heusler Co1−xCuxMnSb compounds

A study of the half-metallic character of the semi Heusler alloys Co_1−xCu_xMnSb (0?x?0.9) is presented. We investigated the saturation magnetization M_S at temperatures from 5 K to room temperature and the temperature dependence of the DC magnetic susceptibility χ above Curie temperature T_C. The magnetic moments at 5 K, for most compositions are very close to the quantized value of 4 μ_B for Mn³⁺ ion, the compound with 90% Co substituted by Cu is still ferromagnetic with M_S (5 K)=3.78 μ_B/f.u. These results emphasize the role of Co atoms in maintaining the ferromagnetic order in the material. The Curie temperature is decreased from 476 K to about 300 K as the Cu content increases from 0% to 90%. Above T_C, the χ⁻¹ vs T curves follow very well the Curie–Weiss law. The effective moment μ_eff and paramagnetic Curie temperature θ are derived. A comparison between the values of M_S at 5 K and μ_eff shows a transition from localized to itinerant spin system in these compounds.     

Size and anisotropy effects on magnetic properties of antiferromagnetic nanoparticles

Based on the Heisenberg model taking into account single-ion anisotropy and using a Green's function technique we have studied the influence of size and anisotropy effects on magnetization M, Neel temperature T_N, coercive field H_c and spin excitation energy of antiferromagnetic nanoparticles. The properties are compared with those of ferromagnetic nanoparticles. We have shown that the enhanced magnetization M and coercive field H_c of antiferromagnetic nanoparticles is a surface effect, which is due to uncompensated surface spins. Moreover, the shape of the coercive field curve can be significantly influenced by surface magnetic anisotropy.     

Structural and magnetic properties of evaporated Fe thin films on Si(1 1 1), Si(1 0 0) and glass substrates

We present experimental results on the structural and magnetic properties of series of Fe thin films evaporated onto Si(1 1 1), Si(1 0 0) and glass substrates. The Fe thickness, t, ranges from 6 to110 nm. X-ray diffraction (XRD) and atomic force microscopy (AFM) have been used to study the structure and surface morphology of these films. The magnetic properties were investigated by means of the Brillouin light scattering (BLS) and magnetic force microscopy (MFM) techniques. The Fe films grow with (1 1 0) texture; as t increases, this (1 1 0) texture becomes weaker for Fe/Si, while for Fe/glass, the texture changes from (1 1 0) to (2 1 1). Grains are larger in Fe/Si than in Fe/glass. The effective magnetization, 4πM_eff, inferred from BLS was found to be lower than the 4πM_S bulk value. Stress induced anisotropy might be in part responsible for this difference. MFM images reveal stripe domain structure for the 110 nm thick Fe/Si(1 0 0) only.     

FMR study of the anisotropic properties of an epitaxial Fe<Subscript>3</Subscript>Si film on a Si(111) vicinal surface

The anisotropic characteristics of an iron silicide (Fe₃Si) epitaxial thin magnetic film grown on a Si(111) silicon vicinal surface with a misorientation angle of 0.14° have been measured by the ferromagnetic resonance method. It has been shown that the polar and azimuth misorientation angles of the crystallographic plane of the substrate can be determined simultaneously from the angular dependences of the ferromagnetic resonance field of the epitaxial film. The effective saturation magnetization of the film M _eff = 1105 G and the constant of the cubic magnetocrystalline anisotropy K ₄ = 1.15 × 10⁵ erg/cm³ have been determined. The misorientation of the substrate plane leads to the formation of steps on the film surface and, as a result, to the appearance of uniaxial magnetic anisotropy of the magnetic dipole nature with the constant K ₂ = 796 erg/cm³. Small unidirectional magnetic anisotropy (K ₁ = 163 erg/cm³), which may be associated with symmetry breaking on the steps of the film and is due to the Dzyaloshinskii–Moriya interaction, has been detected.     

Magnetization reversal dependence on magnetic properties of a spin torque oscillator with in-plane anisotropy free layer and orthogonal polarizer

The effect of magnetic properties on magnetization dynamics is studied for a spin torque oscillator (STO) composed of a free layer with an in-plane magnetic anisotropy and a reference layer with a fixed out-of plane magnetization. A transition from damped to uniform oscillations is observed for a critical value of saturation magnetization M_S). In the uniform oscillations regime, the frequency is inversely proportional to M_S. Similarly, the critical current for achieving uniform oscillations is investigated as a function of free layer intrinsic properties. In a second part of the study, the magnetostatic field (H_m) from the reference layer is considered and it is revealed that the out-of plane component of magnetization has a strong dependence on H_m. For a particular configuration, H_m could reduce the out-of plane component maximizing thus the out-put signal of the STO.     

Magnetic properties of a Pt/Co2FeAl/MgO structure with perpendicular magnetic anisotropy

Microstructures and magnetic properties of Ta/Pt/Co 2 FeAl（CFA）/MgO multilayers are studied to understand perpendicular magnetic anisotropy（PMA） of half-metallic full-Heusler alloy films.PMA is realized in a 2.5-nm CFA film with B2-ordered structure observed by a high resolution transmission electron microscope.It is demonstrated that a high quality interface between the ferromagnetic layer and oxide layer is not essential for PMA.The conversions between in-plane anisotropy and PMA are investigated to study the dependence of magnetic moment on temperature.At the intersection points,the decreasing slope of the saturation magnetization（M s） changes because of the conversions.The dependence of M s on the annealing temperature and MgO thickness is also studied.     

Anisotropy of energy and magnetization of iron-rich Si-Fe-alloys

The anisotropy constants K₁ and M₁ of the crystal energy and of the magnetization, respectively, of iron-rich Si-Fe-alloys have been measured in the temperature range between 80 K and 770 K. The difference between the saturation magnetization in 100 and 110 directions amounts to 0.3 mT. The results allow the conclusion to be made that the exchange parameter in a Stoner-Wohlfarth model equals 2.1 eV.     

Ferromagnetic resonance investigation of nanocrystalline FeCuNbSiB

An elaborate line-shape analysis of the ferromagnetic resonance (FMR) spectra taken in the temperature range 100 K to 350 K on amorphous FeCuNbSiB alloys before and after nanocrystallizing them reveals that in the nanocrystalline state, (i) spin wave stiffness (D) is enhanced while the saturation magnetization,M _S, is reduced, (ii) both the ‘in-plane’ anisotropy field,H _K, as well as the FMR line-width scale with MS, (iii) the single-ion anisotropy of spin-orbit plus crystal field origin dominates over the twoion anisotropy of dipolar origin and (iv) multi-magnon scattering contributions to FMR line-width become important in some cases     

Studies of the magnetic and reversal properties for thin CoCrTa films

The effects of magnetic layer thickness on film structural and magnetic properties were studied systematically with emphasis on the thermal effects on thin recording media films. X-ray diffraction measurements reveal structural changes as thickness decreases, and the existence of a “Cr enriched phase” associated with the interface. The saturation magnetization M_s decreases with thickness and the thickness of the “dead layer” was found to be ∼23 Å. Systematic measurements of effective anisotropy, coercivity and saturation magnetization as functions of temperature have been carried out. Magnetic viscosity measurements reveal that thermal stability is affected not only by grain sizes but also by anisotropy reduction associated with nanostructure evolution, as the film thickness decreases.     

Effect of hydrogenation on spin-reorientation phase transitions and magnetic anisotropy constants of RFe11Ti single crystals (R=Lu, Ho, and Er)

The magnetic anisotropy and spin-reorientation phase transitions in single crystals of the RFe₁₁Ti (R=Lu, Ho, and Er) compounds and their hydrides are investigated. Measurements are carried out on capacitance and torque magnetometers. The magnetic anisotropy constants K ₁ and K ₂ are determined by the mathematical processing of experimental magnetization curves in terms of the phenomenological theory of the anisotropic ferromagnet magnetization. It is demonstrated that the hydrogenation strongly affects the magnitude and the sign of magnetic anisotropy constants, as well as the spin-reorientation phase transitions. The hydrogenation of the HoFe₁₁Ti compound leads to the change in sign of the magnetic anisotropy constant K ₁. The inference is made that a change in the atomic volume and the axial ratio c/a cannot result in the observed effects. A change in the magnetic anisotropy constants upon hydrogenation is primarily due to the change in the interaction of the quadrupole moment of a 4f electron subshell of rare-earth ions with surrounding ions of the crystal lattice and also with valence and conduction electrons.     

Magnetic reversal mechanism in strong perpendicular magnetic anisotropic CoPt/AlN multilayer film

Magnetic reversal mechanism of the Sub/AlN5 nm/[CoPt2 nm/AlN5 nm]₅ nano multilayer film, which shows strong perpendicular magnetic anisotropy (K_u=6.7×10⁶ erg/cm³), has been studied. The angle-dependent magnetic hysteresis loops of this highly perpendicular anisotropic CoPt/AlN multilayer film were measured in the present work, applying a magnetic field along different angles φ with respect to the film normal. It demonstrates that the magnetic reversal of the CoPt ultrathin layers in the CoPt/AlN multilayer film is occurred by the reversible magnetization rotation and the irreversible displacement of domain walls. The φ-dependent part of coercive field is resulted from the internal stress according to the Kondorsky and Kersten model. The φ-independent part of coercive field implies some random and isotropy pinning centers (e.g., vacancies, dislocations, grain boundaries) in the ultrathin CoPt layers. Our work is useful for coercivity control of metal/ceramics layered structures, in particular the perpendicular magnetic tunneling junctions.