用布儒斯特角法同时测定单轴晶体的折射率和光轴方向

在理论上分析了光轴任意方向的单轴晶体的折射率．根据布儒斯特角原理,当线偏振光的电场矢量平行于入射面时,通过测出对样品三个表面的布儒斯特角,就能同时确定单轴晶体的折射率和光轴方向．并利用分光计,在光轴不确定的情况下,测定了方解石的两个主折射率和光轴方向．     

HL-2M 装置环向场线圈中心轴倾角测量方法

通过测量HL-2M 装置环向场线圈指形接头及斜面接头上的若干个点的空间坐标,利用点到平面的距离最小二乘原则,对环向场线圈的外轮廓平面进行拟合。再利用各外轮廓平面与中心轴的空间位置关系,求解得出环向场线圈中心轴倾角。通过简化模型及数值模拟求解出在不同的空间点坐标测量标准差情况下的中心轴倾角。在空间点三维坐标低测量标准差的情况下(σ=0.05mm),拟合求得倾角的相对误差为0.10‰,相对标准偏差为 1.21‰。     

HL-2M װ�û�����Ȧ��������Dz�������

By measuring the spatial coordinates of several points on the figure joints and slice joints of the toroidal field coils on HL-2M device, the outer contour planes of the coils are fitted with the spatial data of the points by the least squared method and the tilt angle of central axis is calculated by the spatial relation between the planes and the central axis. With the simplified model and numerical simulation, the tilt angles of different spatial points with several standard deviations of measurement are calculated. The average relative error of tilt angle is 0.10‰ and the relative standard deviation is 1.21‰ with a low standard deviation of metrology (σ=0.05mm).     

Amplification of the emission of a liquid-crystal microlaser by means of a uniform liquid-crystal layer

The amplification of the emission of a microlaser based on a cholesteric liquid crystal by means of a uniformly oriented layer of a laser-dye-doped nematic liquid crystal is demonstrated. The nematic liquid crystal is characterized by the anisotropy of optical properties, including the amplification coefficient, which opens the possibility of creating amplifiers controlled by a low electric field.     

激光制导装置出射激光束散角和光轴平行性的简易检测方法

在激光末端制导武器系统中,出射激光的束散角和光轴平行性是决定照射精度的重要因素,需要经常性的检查和调整。采用棱镜透镜组合装置把出射激光束经发射通道聚焦成像,根据光斑半径测量束散角。根据光斑中心在瞄准通道中的相对位置确定光轴平行性。这种方法光路简单、装调方便,可以在野外环境下对照射性能快速检测和调整。改变装配结构后,同样适用于其它的末制导系统。     

A method for calculating the light extinction coefficients of a polymer layer with small nematic liquid-crystal droplets

A method is proposed for analyzing radiation extinction coefficients of polymer films containing small nematic liquid-crystal droplets with cylindrical symmetry. This method is based on the Rayleigh-Gans approximation and the effective scattering matrix. The orientational ordering of both liquid-crystal molecules in droplets and the droplets in a layer is described by multilevel order parameters. The extinction of radiation in polymer films is analyzed for the cases of oblique and normal incidence of light. Simple and convenient expressions are derived for calculating and estimating the extinction coefficients for the case of normal incidence of light on a layer containing spherical droplets. The error of the method is estimated.     

Optic axis determination accuracy for fiber-based polarization-sensitive optical coherence tomography

We present a generalized analysis of fiber-based polarization-sensitive optical coherence tomography with an emphasis on determination of sample optic axis orientation. The polarization properties of a fiber-based system can cause an overall rotation in a Poincaré sphere representation such that the plane of possible measured sample optic axes for linear birefringence and diattenuation no longer lies in the QU-plane. The optic axis orientation can be recovered as an angle on this rotated plane, subject to an offset and overall indeterminacy in sign such that only the magnitude, but not the direction, of a change in orientation can be determined. We discuss the accuracy of optic axis determination due to a fundamental limit on the accuracy with which a polarization state can be determined as a function of signal-to-noise ratio.     

The determination of a temperature-dependent tilt angle in a smectic C liquid crystal by electron resonance spectroscopy

A method used by Steiner to simplify the calculation of the hydrogen atom static dipole polarizability is applied to the frequency-dependent dipole and quadrupole polarizabilities.     

基于IMU的3D扫描仪倾角标定方法北大核心CSCD

3D扫描仪以精度高、速度快、自动处理、稳定性好等优势在场景三维重建、智能制造、自动驾驶、虚拟现实等领域得到了广泛的应用。目前3D扫描仪设备多是安装在三脚架上,容易因为地面不平使得扫描仪的转轴和重力方向产生夹角,最终导致拍摄出的全景图和点云倾斜,成为影响三维重建精度的关键难题。针对该问题,提出一种借助惯性测量单元标定3D扫描仪倾角的方法。该方法利用惯性测量单元输出的加速度信息,通过一个面阵相机建立惯性测量单元和3D扫描仪的联系,将惯性测量单元的加速度信息转到扫描仪的转轴上。利用该信息计算出扫描仪转轴与重力方向的夹角,并将该倾角补偿到生成的全景图和点云中,校正倾斜模型。通过实验对校正前后计算的角度进行对比,实验结果证明倾角测量误差可以控制在0.5°以内。并且经过标定后,精度至少提升20%,验证了整个标定方法的可靠性和准确性。     

Silicon-based liquid-crystal cell for self-branching of optical packets

Self-controlled photonic switching was achieved by combining the photoconductivity of a semiconductor and the electrical tunability of a liquid crystal (LC). Pulse packets of 1.06 μm wavelength created free carriers in a silicon electrode of an LC cell, which triggered voltage application for LC reorientation. Consequently, polarization direction of the succeeding packets became perpendicular to that of the preceding packets, and they progressed in different directions after passing through a polarization beam splitter. The cascade LC cells divided a series of packets one by one in a self-controlled manner.     

Investigation of influence of tilt angle on mode dispersion in step-index plastic optical fibers

Effect of numerical aperture on mode dispersion and bandwidth is reported for commercially available step-index plastic optical fibers. For the first time, the functional relationship is given between dispersion and the “tilt-angle” describing the slant of the input/output face for a fiber terminated by a plane not perpendicular to the fiber axis. This tilt of a non-squarely terminated fiber may be intentional as in some biomedical spectroscopic sensors, or otherwise when exploiting the quick-interconnectivity potential of plastic fibers.     

Energy partitioning of ultrasonic waves beyond the critical angle at flat boundaries

Energy partitioning equations for oblique longitudinal waves incident on an interface were coded for a HP 9820 calculator. Program output includes phase angles and imaginary surface wave intensities that have not been previously published. The surface wave intensities may be helpful in understanding the critical angle dip that is experimentally observed. A complete code listing and typical output are included.     

New spectroscopic method for the determination of optical rotatory dispersion

A new spectroscopic methodology is proposed to measure optical rotatory dispersion(ORD)of optically active media.ORD is obtained from a three-step phase shifting algorithm using transmission spectra taken at three independent probing angles.Optical rotation angles of four sugar solutions are investigated.The results obtained by using the new method show excellent agreement with the reference data,indicating the new method can be used as a reliable way for studying ORD of optically active media.     

Contribution of tilt boundaries to the total energy spectrum of grain boundaries in polycrystals

By measuring temperatures T _w for the transition from the incomplete to complete wetting of grain boundaries in poly- and bicrystals, the width of the spectrum of tilt grain boundaries and their contribution to the total energy spectrum of grain boundaries in polycrystals have been experimentally estimated. It has been shown that the tilt grain boundaries correspond to a rather narrow (only 5–10%) portion in the total energy spectrum of grain boundaries in polycrystals. In metals with a low stacking fault energy (copper, tin, zinc), the tilt grain boundaries belong to 10–20% of the grain boundaries with the highest transition temperatures T _w (hence, with low energies). In a metal with a high stacking fault energy (aluminum), the values of T _w for the tilt grain boundaries lie nearly in the middle between the minimum (T _w,min) and maximum (T _w,max) transition temperatures from the incomplete to complete wetting of grain boundaries. This means that grain boundaries with the structure corresponding to a lower energy than that of the symmetric twin boundaries (or stacking faults) can exist in aluminum.     

光在光轴取向任意条件下的晶体表面透射率

为了分析一束光在晶体表面的能量损失以及两束折射光的能量比,给出了一种求解反射率和透射率的方法。讨论了光从各向同性介质入射到单轴晶体表面时的折射和反射,注意到了e光线与e光波方向的不同,e光折射率与e光波法线折射率的不同,得出了在界面处应该满足的边界方程。在晶体光轴取向任意的条件下,给出了表明各光束间能量关系的折射率和反射率的理论表达式,为晶体器件特性的研究提供了有力的理论工具。数值模拟表明:得到的结果满足能量守恒;反射到各向同性介质中的光的电场(或磁场)与原入射光的电场(或磁场)不再平行;光轴的取向和入射角的大小对折射的o光、e光的能量比有很大的影响。     

Point ahead angle prediction based on Kalman filtering of optical axis pointing angle in satellite laser communication

Optical Review - Point ahead angle (PAA) prediction is important in space laser communication, but the existing methods have low accuracy and complicated calculation processes. In this paper, a new...