CoFe2O4@SiO2-PA-CC-guanidine nanoparticles: A novel,efficient, and recyclable catalyst for the synthesis of 3,5-disubstituted-2,6-dicyanoaniline derivatives

A new and efficient procedure for the synthesis of 3,5-disubstituted-2,6-dicyanoaniline derivatives by CoFe₂O₄@SiO₂-PA-CC-guanidine magnetic nanoparticles (MNPs) was reported. 3,5-Disubstituted-2,6-dicyanoaniline derivatives were synthesized from malononitrile, aldehydes, and β-nitrostyrene derivatives in good yields. MNPs used for the synthesis of aniline derivatives were easy to recover and reuse. The CoFe₂O₄@SiO₂-PA-CC-guanidine MNPs were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, thermogravimetric analysis, and vibration sample magnetometry techniques.     

Photoelectron spectroscopy study of the triphenyl derivatives of the group IV elements

The photoelectron He(I) spectra of several phenyl derivatives of the Group IV elements are reported, and the first few bands are assigned to the corresponding MO's. A sizable interaction among the π orbitals of the rings has been found for the carbon derivatives HCPh₃, HC(mesityl)₃ and H₂CPh₂, but not for the Si, Ge and Sn triphenyl derivatives. The exceptional behaviour of the carbon compounds has been attributed to the short central atom—ring distance, by analogy with findings for the Group V triphenyl derivatives.The charge transfer from the rings towards the Si atom is substantially reduced compared with that in H₃SiPh.     

Theoretical studies on heats of formation,detonation properties,and bond dissociation energies of monofurazan derivatives

The heats of formation (HOFs) for a series of monofurazan derivatives were calculated by using density functional theory. It is found that the ? CN or ? N₃ group plays a very important role in increasing the HOF values of the furazan derivatives. The detonation velocities and detonation pressures of the furazan derivatives are evaluated at two different levels. The results show that the ? NF₂ group is very helpful for enhancing the detonation performance for the furazan derivatives, but the case is quite the contrary for the ? CH₃ group. An analysis of the bond dissociation energies and bond orders for the weakest bonds indicate that the substitutions of ? CN group are favorable and enhances the thermal stability of the furazan derivatives, but the ? NO₂ groups produce opposite effects. These results provide basic information for the molecular design of novel high‐energy density materials. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

A highly sensitive and fast responsive fluorescent probe for SO2 derivatives and its application in living cell imaging

Abstract

A new fluorescence probe 1 for sulfur dioxide derivatives has been developed which acts through nucleophilic addition of the derivatives and shows high stability, specificity, and sensitivity. In the presence of SO₂ derivatives, the fluorescence intensity of probe 1 significantly decreases within a short time period of 40?s, along with a low detection limit of 0.32?µM. Fluorescence imaging capability of probe 1 was also investigated, showing clear detection of SO₂ derivatives in living cells. The results indicate that this probe has a great potential for the detection of SO₂ derivatives in broad biological and relevant samples.     

Electrochemical properties of palladium(0) complexes coordinated by quinone derivatives

The polagrophic and cyclic voltammetric behavior of quinone derivatives (Q) and their palladium(0) complexes, (Q)₁ or ²Pd(PPh₃)₂, has been studied. All free quinone derivatives except 5,8,9,10-tetrahydro-1,4-naphthoquinone (THNQ) showed two reversible waves, and all palladium(0) complexes showed irreversible waves. The reduction half-wave potentials for free quinone derivatives lie in the following order:7,7,8,8-tetracyanoquinodimethane (TCNQ) ? p-benzoquinone (BQ) ? 5,8-dihydro-1,4-naphthoquinone (DHNQ) ? 1,4-naphthoquinone (NQ) ? THNQ. The reduction potentials for quinone derivatives shifted toward the negative or coordination to palladium(0). The extents of the shifts depended on the electron-withdrawing ability of the free quinone derivatives. On the other hand, the oxidation potentials for the central palladium(0) in their complexes showed more positive values in comparison with the potential for Pd(PPh₃)₄. However, the oxidation potentials were almost constant for all complexes of the quinone derivatives. On the basis of these facts, the phenomena of charge transfer in the complexes are discussed.     

N-取代马来酰亚胺类hMGL抑制剂的3D-QSAR、分子对接和分子动力学研究

本文通过三维定量构效关系(3D-QSAR)建模、分子对接和分子动力学模拟,探讨了41个N-取代马来酰亚胺类衍生物与人单酰甘油脂肪酶(hMGL)的相互作用,并构建了相关模型。其中,比较分子力场分析模型(CoMFA、q₂ ^{= 0. 5}41、r₂ ^{= 0. 9}72)和比较分子相似性指数分析模型(CoMSIA、q₂ ^{= 0. 5}88、r₂ ^{= 0. 9}19)具有较好的预测能力。QSAR模型等势图阐明了该系列化合物生物活性与结构的关系,并依此设计了系列衍生物。采用分子对接和分子动力学模拟探讨了高活性化合物36、46与hMGL(PDB ID: 3PE6)的结合模式和稳定性,结果表明二者主要通过氢键和疏水相互作用与hMGL结合并且形成了稳定的复合物。随后对pIC₅₀预测值优于文献报道中最高活性化合物36的8个衍生物进行分子对接和ADMET预测,选择2个衍生物进行分子动力学模拟,结果表明2个衍生物分别与hMGL形成的复合物结合构象稳定。本研究为新型N-取代马来酰亚胺类单酰甘油脂肪酶抑制剂的开发提供了理论依据。     

Photobase generation from amineimide derivatives and their use for curing an epoxide/thiol system

The structural effects of amineimide derivatives on photobase generation and the use of the resultant base for thermal curing of an epoxide/thiol system are investigated. The results of UV spectral change and gas chromatographic‐mass spectrometric analysis indicated that amineimide derivatives undergo photolysis by UV irradiation and generate bases. The order of conversion of the photolysis for the functional groups introduced to amineimide derivatives was NO₂ > N(CH₃)₂ > CN > OCH₃ > H. By using aminimide derivatives with NO₂ and N(CH₃)₂ groups, the curing of the epoxide/thiol system was shifted to lower temperature after UV irradiation. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4045–4052, 2002     

Theoretical Investigation of the Additivity of Structural Substituent Effects in Benzene Derivatives

The additivity of substituent effects in 1,3- and 1,4-disubstituted C₆H₄X₂, and 1,3,5-trisubstituted C₆H₃X₃ (X=F, Cl, CN, NO₂, CH₃, CF₃, NH₂, OH) benzene derivatives on the ring geometry has been investigated. The analysis is based on ab initio calculations at the MP2/6-31G** level of theory. The substituent impacts on the benzene ring are generally in good agreement with the results reported in earlier experimental and lower level theoretical studies. The impacts determined in the monosubstituted benzenes were used to estimate the ring distortions in the di- and trisubstituted derivatives. The estimated ring CC bond distances agree generally within 0.001 Å and the estimated CCC bond angles within 0.3 degree, with the optimized ones. The best agreement (deviations up to only 0.0003 Å and 0.03 deg.) between the estimated and optimized geometrical parameters was obtained for the CH₃ derivatives. Generally, the para-disubstituted derivatives showed the best compliance with additivity, somewhat poorer agreement characterized the meta derivatives while the trisubstituted derivatives showed angular distortions of up to about 0.4°.     

Gadolinium triflate catalyzed alkylation of pyrroles: efficient synthesis of 3-oxo-2,3-dihydro-1H-pyrrolizine derivatives

Novel 2-alkylated pyrrole derivatives were synthesized regioselectively by Gd(OTf)₃ catalyzed addition reactions of pyrrole to substituted dimethyl 2-benzylidenemalonate derivatives under mild reaction conditions. 2-Alkylated pyrrole derivatives are used for the construction of the 3-oxo pyrrolizine skeleton. Intramolecular cyclization of alkylated pyrrole derivatives afforded new diastereoselective 3-oxo-2,3-dihydro-1H-pyrrolizine derivatives with good to high yields.     

Synthesis and Photophysical Properties of Alkoxysilyl Derivatives of Dibenzoylmethanatoboron Difluoride

Alkoxysilyl derivatives of dibenzoylmethanatoboron difluoride (DBMBF₂) are synthesized by the hydrosilylation reaction of the corresponding O‐allyl derivatives of DBMBF₂ with triethoxysilane. The photophysical properties of the synthesized O‐allyl and alkoxysilyl derivatives are investigated. It is found that the absorption and fluorescence spectra of the DBMBF₂ derivatives essentially depend on the position of the O‐allyl or O‐propyl alkoxysilyl substituent. The highest fluorescence quantum yield is obtained for the para‐position, whereas the substitution at the meta‐position gives the largest bathochromic shift in the fluorescence spectrum. Density functional theory calculations of the structures and time‐dependent density functional theory calculations of the gas‐phase excitation and emission energies of alkoxysilyl derivatives are performed at the PBE0/SVP level of theory. Some spectral features of para‐, ortho‐, and meta‐substituted derivatives can be adequately explained by the overlapping of two absorption bands.     

Sodium borohydride or potassium carbonate-mediated intramolecular Michael addition: a general method for the synthesis of fused dihydrofuran and furan derivatives

A simple and convenient method for the synthesis of fused dihydrofuran derivatives using NaBH₄-mediated reductive cyclization and fused furan derivatives by K₂CO₃-mediated intramolecular Michael addition followed by acid-catalyzed methanol elimination has been developed.     

Synthesis,Electrochemistry, and Hydrolysis of Anthraquinone Derivatives

Anthraquinone (AQ) derivatives, including members of the anthraquinone imide (AQI) family, have been synthesized to afford good candidates for electron-transfer studies in DNA. Electron-withdrawing groups on the AQ ring give a less negative reduction potential, as desired. As expected, the AQI derivatives have less negative reduction potentials than AQ derivatives. The AQI ring system has a half-life for hydrolysis of about 75 min in a 3:7 MeCN and 0.005 M K₂CO₃ in MeOH.     

Coupling of Titanacyclopentadienes with a Cp Ligand and Elimination of One Substituent

Titanacyclopentadienes, prepared from [Cp₂TiBu₂] and either two equivalents of an alkyne or a diyne, were treated with PMe₃ (3 equiv) at 50 °C for 3 h and then with azobenzene at room temperature for 12 h to give 4,5,6‐trisubstituted indene derivatives with the loss of one substituent in good yields. This reaction contrasts sharply with our previously reported reaction for the formation of 4,5,6,7‐tetrasubstituted indene derivatives without the loss of substituents by the treatment of titanacyclopentadienes with azobenzene without PMe₃. ¹³C NMR spectroscopy of the product derived from a ¹³C‐enriched complex revealed that the five carbon atoms originating from a Cp ligand were arranged linearly in the trisubstituted indene derivatives, in contrast to the 4,5,6,7‐tetrasubsituted indene derivatives, in which the corresponding five carbon atoms are arranged in a ring.     

13C NMR study of polarizations and polarization ranges of vinylene groups in seven series of related compounds

Polarizations, polarization ranges and ratios of polarization ranges for vinylene groups in seven series, namely chalcone derivatives, ferrocene analogues of chalcone, stilbene derivatives, ferrocene analogues of stilbene, and styrene derivatives, were studied. The polarization ranges spanning the intervals between ¹³C NMR chemical shifts of the derivatives substituted by p-NO₂ and p-NMe₂ groups are compared in these related compounds. The influence of the side-chain groups in the vinylene moiety and of the sign of the polarization on the substituent-effect are discussed.     

Study on the properties of dextran-linked adenine nucleotide derivatives

A simple method is described for the preparation of dextran-linked coenzyme derivatives. Several different 8-(6-aminohexyl)amino-adenine nucleotide coenzymes and their derivatives were covalently attached to dextran by incubation with bromohydroxypropyl derivatives of dextran at room temperature in an alkaline medium. The polymer-linked adenine nucleotide derivatives were separated from the free coenzyme derivatives by a Sephadex G-50 column. The prepared dextran derivatives have ligand densities ranging from 20 to 100 μmol/g of dextran derivatives depending on the conditions of coupling and derivatives. NMR studies revealed that proton resonances of the polymer-linked coenzymes exhibit short transverse relaxation times (T₂) but long longitudinal relaxation times (T₁) This phenomenon was interpreted in terms of the anisotropic motions of the dextran-bound coenzyme derivatives in which the fast axial motions and slow restricted transverse motions of the bound coenzyme derivatives are postulated. These observations could properly explain why the polymer-linked coenzymes exhibit lower biological activity, but similar binding affinity to most enzymes.     

C(1)-Phenethyl Derivatives of [closo-1-CB11H12]− and [closo-1-CB9H10]− Anions: Difunctional Building Blocks for Molecular Materials

C(1)-vinylation of [closo-1-CB₉H₁₀]⁻ ( A ) and [closo-1-CB₁₁H₁₂]⁻ ( B ) with 4-benzyloxystyryl iodide followed by hydrogenation of the double bond and reductive deprotection of the phenol functionality led to C(1)-(4-hydroxyphenethyl) derivatives. The phenol functionality was protected as the acetate. The esters were then treated with PhI(OAc)₂ and the resulting isomers were separated kinetically (for derivatives of anion A ) or by chromatography (for derivatives of anion B ) giving the difunctionalized building blocks in overall yields of 9 % and 50 %, respectively. A similar series of reactions was performed starting with anions A and B and 4-methoxystyryl bromide and iodide. Significant differences in the reactivity of derivatives of the two carborane anions were rationalized with DFT computational results. Application of the difunctionalized carboranes as building blocks was demonstrated through preparation of two ionic liquid crystals. The extensive synthetic work is accompanied by single crystal XRD analysis of six derivatives.     

Dehydrofluorination with triethylamine-boron trifluoride adduct. New synthesis of perfluoromethacrylic acid derivatives and related compounds

Adduct (C₂H₅)₃N·BF₃ has proved to be a suitable dehydrofluorinating reagent for preparing highly reactive fluoroolefines through dehydrofluorination of corresponding monohydro derivatives. Its advantage over other dehydrofluorinating agents are demonstrated by the synthesis of a number of perfluoromethacrylic acid derivatives.     

Correlation between hydrophobicity of amino acids and retention data in reversed-phase liquid chromatography with micellar eluents

Summary Hydrophobic character is usually expressed in terms of the partition coefficient in 1-octanol-water (log P_o/w). However, measurement of this coefficient is often problematic. Retention in micellar liquid chromatography is mainly due to hydrophobic interactions and can also be used as an index of hydrophobicity. A hydrophobicity scale was established with retention data foro-phthalaldehyde (OPA)-N-acetyl-L-cysteine (NAC) amino acid derivatives, using the glycine derivative as reference. Since the OPA-NAC derivatives only differ in the nature of R₁ in the amino acid (R₁CH (COOH)NH₂), in the absence of electrostatic interactions the hydrophobic character of the substituent was responsible for retention. Linear relationships were obtained between log of the ratiok′ of amino acid derivatives:k′ of the glycine derivative for a given mobile phase, and logP _o/w for the R₁ substituent. Good correlations were also found for phenylthiohydantoin amino acid derivatives.     

Synthesis and biological evaluation of picroside derivatives as hepatoprotective agents

Picrorhizae Rhizoma as a hepatoprotective herb, has been applied for thousands of years, and picroside was proved to be its active constituent. In this study, twelve derivatives of picroside were synthesized and the hepatoprotective activity of the derivatives was evaluated on SMMC-7721 cells. Six out of the derivatives had shown a better protective effect on H₂O₂-induced SMMC-7221 cells than picroside, and the activity of two derivatives (2 and 4) was stronger than that of the reference compound, silybin. Compound 2 shown the strongest protective effect (EC₅₀?=?6.064?±?1.295?μM).     

Molecular structures of trinitromethane derivatives

The molecular structures of trinitromethane derivatives XC(NO₂)₃ (X = F, Cl, Br, NC, NF₂, N₃) were studied using the density functional approach. The rules for changing the configurations of substituents in these compounds were revealed. Acceptability of the method employed for the calculations of trinitromethane derivatives is discussed.