Reductive elimination reaction of rhenium complexes trans-(η-C5Me5)Re(CO)2(chloroaryl)Cl

Thermal reaction of the chloroaryl-chloride complexes trans-(η⁵-C₅Me₅)Re(CO)₂(Ar^Cl)Cl (Ar^Cl = 3-ClC₆H₄, 3-ClC₆H₃(4-Me) and 3,5-Cl₂C₆H₃) in acetonitrile did not interconvert to the cis isomer, instead the complex ReCl(CO)₂(NCMe)₃ and the corresponding 5-Ar^Cl-1,2,3,4,5-pentamethylcyclopentadiene were formed. Similar reductive elimination products were obtained when the starting rhenium complexes were reacted with trimethylphosphite in toluene.     

Stoichiometric and catalytic C-Cl activation of Aryl Chlorides using an NHC-stabilized nickel(0) complex

[Ni₂(ⁱPr₂Im)₄(COD)] 1 catalyzes the Suzuki-Miyaura-type cross coupling reaction of chlorobenzene and phenylboronic acid efficiently. Compound 1 compares well with other nickel catalyst reported so far with the advantage that no further excess of ligand such as PPh₃ has to be added. Oxidative addition of different aryl chlorides to complex 1 is highly selective for a broad range of substrates, ranging from activated to deactivated aryl chlorides. The stoichiometric reaction of 1 with aryl chlorides (ArCl) afforded complexes of the type trans-[Ni(ⁱPr₂Im)₂(Cl)(Ar)] (for Ar = Ph 2, 4-Me(O)CC₆H₄3, 4-H(O)CC₆H₄4, 4-MeOC₆H₄5, 4-H₂NC₆H₄6, 4-F₃CC₆H₄7, 4-ClC₆H₄8, 3-ClC₆H₄9, 2-ClC₅NH₃10 4-FC₆H₄11). All resulting nickel(II) complexes have been fully characterized, in most cases including X-ray diffraction. In contrast to the work described by Matsubara and coworkers just recently on the sterically slightly more demanding [Ni(Dip₂Im)₂] system, we have found for the [Ni(ⁱPr₂Im)₂] complexes no indication for the formation of three coordinated nickel(I) complexes.     

A study on methanol steam reforming to CO2 and H2 over the La2CuO4 nanofiber catalyst

The La₂CuO₄ crystal nanofibers were prepared by using single-walled carbon nanotubes as templates under mild hydrothermal conditions. The steam reforming of methanol (SRM) to CO₂ and H₂ over such nanofiber catalysts was studied. At the low temperature of 150 °C and steam/methanol=1.3, methanol was completely (100%, 13.8 g/h g catalyst) converted to hydrogen and CO₂ without the generation of CO. Within the 60 h catalyst lifespan test, methanol conversion was maintained at 98.6% (13.6 g/h g catalyst) and with 100% CO₂ selectivity. In the meantime, for distinguishing the advantage of nanoscale catalyst, the La₂CuO₄ bulk powder was prepared and tested for the SRM reaction for comparison. Compared with the La₂CuO₄ nanofiber, the bulk powder La₂CuO₄ showed worse catalytic activity for the SRM reaction. The 100% conversion of methanol was achieved at the temperature of 400 °C, with the products being H₂ and CO₂ together with CO. The catalytic activity in terms of methanol conversion dropped to 88.7% (12.2 g/h g catalyst) in 60 h. The reduction temperature for nanofiber La₂CuO₄ was much lower than that for the La₂CuO₄ bulk powder. The nanofibers were of higher specific surface area (105.0 m²/g), metal copper area and copper dispersion. The in situ FTIR and EPR experiments were employed to study the catalysts and catalytic process. In the nanofiber catalyst, there were oxygen vacancies. H₂-reduction resulted in the generation of trapped electrons [e] on the vacancy sites. Over the nanofiber catalyst, the intermediate H₂CO/HCO was stable and was reformed to CO₂ and H₂ by steam rather than being decomposed directly to CO and H₂. Over the bulk counterpart, apart from the direct decomposition of H₂CO/HCO to CO and H₂, the intermediate H₂COO might go through two decomposition ways: H₂COO=CO+H₂O and H₂COO=CO₂+H₂.     

[Ni(P2N2)2(NCMe)][BF4]2 as an electrocatalyst for H2 production: P2N2 = 1,5-(di(4-(thiophene-3-yl)phenyl)-3,7-diphenyl-1,5-diaza-3,7-diphosphacyclooctane)

A new cyclic 1,5-diaza-3,7-diphosphacyclooctane ligand was prepared with phenyl substituents on phosphorus and (thiophene-3-yl)phenyl substituents on nitrogen. This ligand reacts with [Ni(CH₃CN)₆][BF₄]₂ to form the corresponding [Ni(P^Ph₂N^Ar₂)₂(NCMe)][BF₄]₂ complex, 3, which is an active electrocatalyst for H₂ production. Kinetic studies indicate that the catalytic rate is first order in catalyst and second order in acid at low concentrations of acid, but at higher acid concentrations the catalytic rate becomes independent of acid concentration. The rate-determining step at high acid concentrations is attributed to the elimination of H₂ from a reduced Ni species. The modest overpotential of 280 mV and a turnover frequency of 56 s⁻¹ confirm that 3 is a relatively active catalyst for H₂ production in acetonitrile solutions. Oxidation of the pendant thiophene substituents of 3 results in the formation of films on glassy carbon electrode surfaces. However these films are not electroactive, and electrocatalysis of proton reduction is not observed with these modified electrodes.     

Calorimetric study and thermal analysis of [Gd4/3Y2/3(Gly)6(H2O)4](ClO4)6·5H2O and [ErY(Gly)6(H2O)4](ClO4)6·5H2O (Gly: glycin)

Two solid-state coordination compounds of rare earth metals with glycin, [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O and [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O were synthesized. The low-temperature heat capacities of the two coordination compounds were measured with an adiabatic calorimeter over the temperature range from 78 to 376 K. [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 342.90 K, while [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 328.79 K. The molar enthalpy and entropy of fusion for the two coordination compounds were determined to be 18.48 kJ mol⁻¹ and 53.9 J K⁻¹ mol⁻¹ for [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, 1.82 kJ mol⁻¹ and 5.5 J K⁻¹ mol⁻¹ for [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, respectively. Thermal decompositions of the two coordination compounds were studied through the thermogravimetry (TG). Possible mechanisms of the decompositions are discussed.     

Efficient solvent-free aminolysis of epoxides under (C4H12N2)2[BiCl6]Cl·H2O catalysis

An efficient and rapid procedure for ring opening of various epoxides with aromatic, aliphatic and heterocyclic amines is developed at room temperature under solvent-free conditions in the presence of (C₄H₁₂N₂)₂[BiCl₆]Cl·H₂O (1 mol %). This catalyst can be reused several times without losing of its activity.     

Synthesis and thermochemistry of SrB2O4·4H2O and SrB2O4

Two pure strontium borates SrB₂O₄·4H₂O and SrB₂O₄ have been synthesized and characterized by means of chemical analysis and XRD, FT-IR, DTA-TG techniques. The molar enthalpies of solution of SrB₂O₄·4H₂O and SrB₂O₄ in 1 mol dm⁻³ HCl(aq) were measured to be −(9.92 ± 0.20) kJ mol⁻¹ and −(81.27 ± 0.30) kJ mol⁻¹, respectively. The molar enthalpy of solution of Sr(OH)₂·8H₂O in (HCl + H₃BO₃)(aq) were determined to be −(51.69 ± 0.15) kJ mol⁻¹. With the use of the enthalpy of solution of H₃BO₃ in 1 mol dm⁻³ HCl(aq), and the standard molar enthalpies of formation for Sr(OH)₂·8H₂O(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpies of formation of −(3253.1 ± 1.7) kJ mol⁻¹ for SrB₂O₄·4H₂O, and of −(2038.4 ± 1.7) kJ mol⁻¹ for SrB₂O₄ were obtained.     

Selective and mild oxidation of sulfides to sulfoxides or sulfones using H2O2 and Cp′Mo(CO)3Cl as catalysts

Dialkyl, aryl-alkyl, benzylic, and benzothiophenic sulfides are selectively oxidized to sulfoxides or sulfones, with stoichiometric amounts of H₂O₂ (aq) or TBHP, in the presence of complexes Cp′Mo(CO)₃Cl, CpMoO₂Cl and the mesoporous material MCM-41-2 as catalysts. The use of the thianthrene 5-oxide (SSO) probe shows that CpMo(CO)₃Cl/H₂O₂ or TBHP are electrophilic oxidants (Xso ? 15). The same conclusion is drawn from competition experiments with a mixture of p-ClC₆H₄SCH₃ and C₆H₅SOCH₃.     

Iodomethane oxidative addition and CO migratory insertion in monocarbonylphosphine complexes of the type [Rh((C6H5)COCHCO((CH2)nCH3))(CO)(PPh3)]: Steric and electronic effects

The chemical kinetics, studied by UV/Vis, IR and NMR, of the oxidative addition of iodomethane to [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)], with R = (CH₂)_nCH₃, n = 1-3, consists of three consecutive reaction steps that involves isomers of two distinctly different classes of Rh^III-alkyl and two distinctly different classes of Rh^III-acyl species. Kinetic studies on the first oxidative addition step of [Rh((C₆H₅)COCHCOR)(CO)(PPh₃)] + CH₃I to form [Rh((C₆H₅)COCHCOR)(CH₃)(CO)(PPh₃)(I)] revealed a second order oxidative addition rate constant approximately 500-600 times faster than that observed for the Monsanto catalyst [Rh(CO)₂I₂]⁻. The reaction rate of the first oxidative addition step in chloroform was not influenced by the increasing alkyl chain length of the R group on the β-diketonato ligand: k₁ = 0.0333 ([Rh((C₆H₅)COCHCO(CH₂CH₃))(CO)(PPh₃)]), 0.0437 ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₃))(CO)(PPh₃)]) and 0.0354 dm³ mol⁻¹ s⁻¹ ([Rh((C₆H₅)COCHCO(CH₂CH₂CH₂CH₃))(CO)(PPh₃)]). The pK_a^′ and keto-enol equilibrium constant, K_c, of the β-diketones (C₆H₅)COCH₂COR, along with apparent group electronegativities, χ_R of the R group of the β-diketones (C₆H₅)COCH₂COR, give a measurement of the electron donating character of the coordinating β-diketonato ligand: (R, pK_a^′, K_c, χ_R) = (CH₃, 8.70, 12.1, 2.34), (CH₂CH₃, 9.33, 8.2, 2.31), (CH₂CH₂CH₃, 9.23, 11.5, 2.41) and (CH₂CH₂CH₂CH₃, 9.33, 11.6, 2.22).     

In situ formation of Ni nanoparticles supported on NiFe2O4 by calcination

Ni/NiFe₂O₄ composites have been successfully prepared by calcination at 400°C in air of the mixture K₃[Fe(ox)₃]·2.5H₂O and NiCl₂·6H₂O with a molar ratio of 0.7-2. The products are featured by the Ni crystallite size of 15-34 nm, BET surface area of 23-41 m²/g and variable Ni loadings. TGA and FTIR results indicate in situ generation of CO molecules from decomposition of K₃[Fe(ox)₃]·2.5H₂O. These in situ generated CO molecules account for the formation of Ni nanoparticles by reduction of Ni(II) ions.     

A gentle and efficient route for the deoxygenation of sulfoxides using catecholborane (HBcat; cat = 1,2-O2C6H4)

The addition of catecholborane (HBcat; cat = 1,2-O₂C₆H₄) to a wide range of sulfoxides affords the corresponding sulfides, dihydrogen, and catBOBcat. The diboron compound catBOBcat acts like a Lewis acid and will coordinate one molecule of the starting sulfoxide. Although deoxygenations with bulky or electron withdrawing sulfoxides are slow, these reactions can be greatly accelerated with the use of excess HBcat or by employing a rhodium catalyst.     

Syntheses and characterization of ANi(AsF6)3 (A = H3O, O2, NO, NH4, K, Rb, and Cs) compounds

ANi(AsF₆)₃ (A = O₂⁺, NO⁺, NH₄⁺) compounds could be prepared by reaction between corresponding AAsF₆ salts and Ni(AsF₆)₂. When mixtures of AF (A = Li, Na, K, Rb, Cs) and NiF₂ are dissolved in aHF acidified with an excess of AsF₅ the corresponding AAsF₆ and Ni(AsF₆)₂ were formed in situ. For A = Li and Na only mixtures of AAsF₆ and Ni(AsF₆)₂ were obtained, while for A = K, Rb and Cs, the final products were ANi(AsF₆)₃ (A = K-Cs) compounds contaminated with AAsF₆ (A = K-Cs) and Ni(AsF₆)₂.ANi(AsF₆)₃ (A = H₃O⁺, O₂⁺, NO⁺, NH₄⁺ and K⁺) compounds are structurally related to previously known H₃OCo(AsF₆)₃. The main features of the structure of these compounds are rings of NiF₆ octahedra sharing apexes with AsF₆ octahedra connected into infinite tri-dimensional network. In this arrangement cavities are formed where single charged cations are placed.In O₂Ni(AsF₆)₃ the vibrational band belonging to O₂⁺ vibration is found at 1866 cm⁻¹, which is according to the literature data one of the highest known values, and it is only 10 cm⁻¹ lower than the value for free O₂⁺.     

H2O + Fe(NO3)3 + Ni(NO3)2 ternary system isotherms at 0 °C and 30 °C

H₂O + Ni(NO₃)₂ binary system were investigated in the temperature range from −25 °C to 55 °C. The solid-liquid equilibria of the ternary system H₂O + Fe(NO₃)₃ + Ni(NO₃)₂ were studied using a synthetic method based on conductivity measurements. Tow isotherms were established at 0 °C and 30 °C, and the appearing stable solid phases are iron nitrate nonahydrate (Fe(NO₃)₃·9H₂O), iron nitrate hexahydrate (Fe(NO₃)₃·6H₂O), nickel nitrate hexahydrate (Ni(NO₃)₂·6H₂O) and nickel nitrate tetrahydrate (Ni(NO₃)₂·4H₂O).     

Transition metal complexes with thiosemicarbazide-based ligands. Part LIV. Nickel(II) complexes with pyridoxal semi- (PLSC) and thiosemicarbazone (PLTSC). Crystal and molecular structure of [Ni(PLSC)(H2O)3](NO3)2 and [Ni(PLTSC-H)py]NO3

This paper describes the synthesis of the first Ni(II) complexes with pyridoxal semicarbazone (PLSC), viz. Ni(PLSC)Cl₂ · 3.5H₂O (1), [Ni(PLSC)(H₂O)₃](NO₃)₂ (2), Ni(PLSC)(NCS)₂ · 4H₂O (3), [Ni(PLSC-2H)NH₃] · 1.5H₂O (4), as well as two new complexes with pyridoxal thiosemicarbazone (PLTSC), [Ni(PLTSC-H)py]NO₃ (5) and [Ni(PLTSC-H)NCS] (6). Complexes 1–3 are paramagnetic and have most probably an octahedral structure, for complex 2 this was proved by X-ray diffraction analysis. In contrast, complexes 4–6 are diamagnetic and have a square-planar structure, and in the case of complex 5 this was also confirmed by X-ray structural analysis. In all cases the Schiff bases are coordinated as tridentate ligands with an ONX (X = O, PLSC; X = S, PLTSC) set of donor atoms. With the complexes involving the neutral form of PLSC and the monoanionic form of PLTSC, the PL moiety is in the form of a zwitterion. In addition to the above-mentioned techniques, all the complexes were characterized by measuring their molar conductivities, UV–Vis and partial IR spectra.     

Thermochemistry of NaRb[B4O5(OH)4]·4H2O

The enthalpies of solution of NaRb[B₄O₅(OH)₄]·4H₂O in approximately 1 mol dm⁻³ aqueous hydrochloric acid and of RbCl in aqueous (hydrochloric acid + boric acid + sodium chloride) were determined. From these results and the enthalpy of solution of H₃BO₃ in approximately 1 mol dm⁻³ HCl(aq) and of sodium chloride in aqueous (hydrochloric acid + boric acid), the standard molar enthalpy of formation of −(5128.02 ± 1.94) kJ mol⁻¹ for NaRb[B₄O₅(OH)₄]·4H₂O was obtained from the standard molar enthalpies of formation of NaCl(s), RbCl(s), H₃BO₃(s) and H₂O(l). The standard molar entropy of formation of NaRb[B₄O₅(OH)₄]·4H₂O was calculated from the Gibbs free energy of formation of NaRb[B₄O₅(OH)₄]·4H₂O computed from a group contribution method.     

Synthesis of [Ni(η-CH2C6H4R-4){PPh(CH2CH2PPh2)2}] (R = H, Me or MeO) and protonation reactions with HCl

The complexes [Ni(η²-CH₂C₆H₄R-4)(triphos)]BPh₄ {R = H, Me or MeO; triphos = PhP(CH₂CH₂PPh₂)₂} have been prepared and characterised by spectroscopy and X-ray crystallography. In all cases the coordination geometry of the nickel is best described as square-planar with an η²-benzyl ligand occupying one of the positions. The orientation of the η²-benzyl ligand is dictated by the steric restrictions imposed by the phenyl groups on the triphos ligand, so that the phenyl group on the unique secondary phosphorus and the aromatic group of the benzyl ligand (which are trans to one another) are oriented in the same direction. [Ni(η²-CH₂C₆H₄R-4)(triphos)]⁺ react with an excess of anhydrous HCl in MeCN to form [NiCl(triphos)]⁺ (characterised as the [BPh₄]⁻ salt by X-ray crystallography) and the corresponding substituted toluene. The kinetics of the reaction of all [Ni(η²-CH₂C₆H₄R-4)(triphos)]⁺ and HCl in the presence of Cl⁻ have been determined using stopped-flow spectrophotometry. All reactions exhibit a first-order dependence on the concentration of complex and a first-order dependence on the ratio [HCl]/[Cl⁻]. Varying the 4-R-substituent on the benzyl ligand shows that electron-withdrawing substituents facilitate the rate of the reaction. It is proposed that the mechanism involves initial rapid protonation at the nickel to form [NiH(η²-CH₂C₆H₄R-4)(triphos)]²⁺, followed by intramolecular proton migration from nickel to carbon to yield the products.     

Effect of the organic fragment on the mesogenic properties of a series of organogold(I) isocyanide complexes. X-ray crystal structure of [Au(CCC5H4N)(CNC6H4O(O)CC6H4OC10H21)]

Rod-like organogold(I) complexes [AuR(CNC₆H₄O(O)CC₆H₄OC₁₀H₂₁-p)] were prepared and their liquid crystal behaviour was studied. Depending on the nature of R, the synthetic methodology was different. Thus, for R = substituted alkynyl ligands, the new compounds were prepared in two steps:(i) reaction of [AuCl(tht)] (tht = tetrahydrothiophene) with R′CCH(R′ = C₅H₄N, C₆H₄CN, C₆H₄CCC₅H₄N) in the presence of NaOAc to give insoluble [Au(CCR′)]_n; (ii) reaction of the latter polymers with the isonitrile CNC₆H₄O(O)CC₆H₄OC₁₀H₂₁-p.For R = fluorinated aryls, the complexes were prepared by displacement of tht from the compounds [AuR(tht)] (R = C₅F₄N, C₆F₄C₅H₄N, C₆F₅) with isonitrile.In addition, an unexpected ionic derivative [Au(CCC₅H₄NC₁₀H₂₁)₂][Au(CCC₅H₄N)₂] was formed in the reaction between [PPh₄][Au(CCC₅H₄N)₂] and C₁₀H₂₁I. All these compounds have been characterized by IR and NMR spectroscopy and mass spectrometry. The X-ray crystal structure of the compound with R = CCC₅H₄N shows a linear molecule in which the gold atom is surrounded by the pyridine-containing acetylene and the isonitrile ligand, and no direct gold-gold interaction occurs. Six of the neutral compounds are liquid crystals and their optical, thermal and thermodynamic data were analyzed and compared in terms of molecular polarizability.     

Stabilisation of heterobimetallic networks by crown ethers and hydrogen-bonding in [Ni(H2O)6][Cu3Cl8(H2O)2] · (15-crown-5)2 · 2H2O: Structure and magnetism

[Ni(H₂O)₆][Cu₃Cl₈(H₂O)₂] · (15-crown-5)₂ · 2H₂O can be conveniently prepared by the interaction of NiCl₂ · 6H₂O, CuCl₂ · 2H₂O and 15-crown-5 in water. The X-ray crystal structure reveals an ionic complex involved in a hydrogen-bonded two dimensional network with the [Ni(H₂O)₆]²⁺ and [Cu₃Cl₈(H₂O)₂]²⁻ ions sandwiched between the 15-crown-5 macrocycles. The magnetic susceptibility data (4–300 K) and magnetisation isotherms (2–5.5 K; 0–5 T) are best interpreted in terms of intra-trimer ferromagnetic coupling within the [Cu₃Cl₈(H₂O)₂]²⁻ moieties, with J ∼ 6 cm⁻¹, and antiferromagnetic coupling between the trimers, the latter mediated by H-bonding pathways. Comparisons are made to other reported quaternary ammonium salts of [Cu₃Cl₈]²⁻ and [Cu₃Cl₁₂]⁶⁻, most of which display structures that involve close stacking of such Cu(II) trimers, rather than being of the present isolated, albeit H-bonded, types.     

Chiral “P-N-P” ligands, (C20H12O2)PN(R)PY2 [R = CHMe2, Y = C6H5, OC6H5, OC6H4-4-Me, OC6H4-4-OMe or OC6H4-4-Bu] and their allyl palladium complexes

Chiral “P-N-P” ligands, (C₂₀H₁₂O₂)PN(R)PY₂ [R = CHMe₂, Y = C₆H₅ (1), OC₆H₅ (2), OC₆H₄-4-Me (3), OC₆H₄-4-OMe (4) or OC₆H₄-4-^tBu (5)] bearing the axially chiral 1,1′-binaphthyl-2,2′-dioxy moiety have been synthesised. Palladium allyl chemistry of two of these chiral ligands (1 and 2) has been investigated. The structures of isomeric η³-allyl palladium complexes, (R′ = Me or Ph; Y = C₆H₅ or OC₆H₅) have been elucidated by high field two-dimensional NMR spectroscopy. The solid state structure of [Pd(η³-1,3-Ph₂-C₃H₃){κ²-(racemic)-(C₂₀H₁₂O₂)PN(CHMe₂)PPh₂}](PF₆) has been determined by X-ray crystallography. Preliminary investigations show that the diphosphazanes, 1 and 2 function as efficient auxiliary ligands for catalytic allylic alkylation but give rise to only moderate levels of enantiomeric excess.     

Group 12 metal aryl selenolates. Crystal and molecular structure of [2-(Et2NCH2)C6H4]2Se2 and [2-(Me2NCH2)C6H4Se]2M (M = Zn, Cd)

Diorganodiselenide [2-(Et₂NCH₂)C₆H₄]₂Se₂ (1) was obtained by hydrolysis/oxidation of the corresponding [2-(Et₂NCH₂)C₆H₄]SeLi derivative. The treatment of [2-(Et₂NCH₂)C₆H₄]₂Se₂ with elemental sodium in THF resulted in [2-(Et₂NCH₂)C₆H₄]SeNa (2). Reactions between alkali metal selenolates [2-(R₂NCH₂)C₆H₄]SeM′ (R = Me, Et; M′ = Li, Na) and MCl₂ (M = Zn, Cd) in a 2:1 molar ratio resulted in the [2-(R₂NCH₂)C₆H₄Se]₂M species [R = Me, M = Zn (3), Cd (4); R = Et, M = Zn (5), Cd (6)]. The new compounds were characterized by multinuclear NMR (¹H, ¹³C, ⁷⁷Se, ¹¹³Cd) and mass spectrometry. The crystal and molecular structures of 1, 3 and 4 revealed monomeric species stabilized by N → Se (for 1) and N → M (for 3 and 4) intramolecular interactions.