A high hydroarylation activity of K2PtCl4/AgOTf catalyst in the reaction of propiolic acid with unactivated and activated arenes

A mixed catalyst K₂PtCl₄/AgOTf showed the highest activity for hydroarylation of propiolic acid, among palladium and platinum catalysts. This catalyst was effective for hydroarylation with less reactive benzene to give cis-cinnamic acid in good yield. The hydroarylation with toluene gave a higher yield of hydroarylation products than that with benzene and resulted in ortho/para orientation with an almost statistical ratio, suggesting that the result is very close to that of the Friedel-Crafts alkylation with methyl bromide or p-nitrobenzyl chloride. Hydroarylation of propiolic acid with other electron-rich arenes proceeded efficiently in the presence of the K₂PtCl₄/AgOTf catalyst in trifluoroacetic acid forming cis-cinnamic acids in good to high yields. This method was also applied to hydroarylation of ethyl propiolate.     

Regioselective synthesis of 3,3-bis(indolyl)propanoic acid derivatives by iron(III)-catalyzed hydroarylation of propynoic acid derivatives with indoles

Intermolecular hydroarylation of propynoic acid and its esters with indoles proceeded efficiently in acetic acid under a catalytic system of FeCl₃/3AgOTf and afforded the corresponding 3,3-bis(indol-3yl)propanoic acids and their esters in high yields. In the case of 2-methylindole, 3-indolylacrylic acid and its ethyl ester were obtained in high yields. This iron-catalyzed hydroarylation showed a high regioselectivity at the 3-position of indoles and a high utility for the synthesis of bis(indol-3-yl) compounds, which are important for biological and pharmaceutical fields.     

Efficient and selective hydroarylation of propiolic acids and their esters with arenes catalyzed by a PtCl2/AgOTf system

PtCl₂/AgOTf-catalyzed hydroarylation of ethyl propiolate proceeded effectively to give ethyl (2Z)-cinnamate derivatives in good to high yields, without the formation of diethyl (1E,3Z)-4-arylbuta-1,3-diene-1,3-dicarboxylates that was observed in Pd(OAc)₂-catalyzed reaction. Especially, PtCl₂/AgOTf-catalyzed hydroarylation of propiolic acids proceeded effectively to give (2Z)-cinnamic acids exclusively.     

Highly selective hydroarylation of propiolic acid derivatives using a PtCl2/AgOTf catalytic system

Hydroarylation of propiolic acid derivatives with arenes in trifluoroacetic acid efficiently proceeded in the presence of PtCl₂/AgOTf catalyst to give cis-cinnamic acid derivatives in good to high yields. This PtCl₂/AgOTf-catalyzed reaction did not afford any 4-arylbuta-1,3-diene-1,3-dicarboxylic acid derivatives formed by Pd(OAc)₂-catalyzed hydroarylation. The specific optimization of the catalytic hydroarylation and application to electron-rich arenes are reported.     

Catalytic hydroarylation of alkynes with arenes in the presence of FeCl3 and AgOTf

Hydroarylation of propiolic acids with various arenes in TFA proceeded efficiently in the presence of FeCl₃/AgOTf catalyst system. In the case of electron-rich arenes, the iron-catalyzed hydroarylation gave cinnamic acids in moderate to high yields. The hydroarylation of phenylacetylene was observed but the catalyst was not effective under the same conditions.     

Regioselective C−H Hydroarylation of Internal Alkynes with Arenecarboxylates: Carboxylates as Deciduous Directing Groups

In the presence of catalytic [Ru(p‐cym)I₂]₂ and the base guanidine carbonate, benzoic acids react with internal alkynes to give the corresponding 2‐vinylbenzoic acids. This alkyne hydroarylation is generally applicable to diversely substituted electron‐rich and electron‐poor benzoic and acrylic acids. Aryl(alkyl)acetylenes react regioselectively with formation of the alkyl‐branched hydroarylation products, and propargylic alcohols are converted into γ‐alkylidene‐δ‐lactones. The hydroarylation can also be conducted decarboxylatively with a different choice of catalyst and reaction conditions. This reaction variant, which does not proceed via intermediate formation of 2‐vinylbenzoic acids, opens up a regioselective, waste‐minimized synthetic entry to vinylarenes.     

Trifluoroacetic acid-mediated hydroarylation: synthesis of dihydrocoumarins and dihydroquinolones

[reaction: see text] Trifluoroacetic acid mediates the hydroarylation of alkenes to afford dihydrocoumarins and dihydroquinolones in good yield. Intermolecular hydroarylation of cinnamic acids by phenols is particularly facile, which leads to the conclusion that previous reports of palladium-catalyzed hydroarylation of cinnamic acids in trifluoroacetic acid are erroneous.     

Chemical libraries via sequential C-H functionalization of phenols

Phenols provide a useful template for diversification via sequential hydroarylation reactions. Specifically, a protocol has been developed that begins with the hydroarylation of cinnamic acids by 3,5-dimethoxyphenol to produce dihydrocoumarins. This activated ester undergoes facile ring-opening with amines to form a C-N bond and regenerate a phenol. The resulting phenol can be further functionalized via a second hydroarylation reaction. Thus, in 3-4 steps, a phenol is coupled with a cinnamic acid, an amine, and a cinnamic or propiolic acid.     

Iron-catalyzed synthesis of phenanthrenes via intramolecular hydroarylation of arene-alkynes

An Fe(OTf)₃-catalyzed intramolecular hydroarylation of arene-alkynes with high functional group tolerance has been reported, affording a series of phenanthrene derivatives efficiently. A low catalytic amount of Fe(OTf)₃ is applied in this reaction. This transformation provides a convenient and practical method for the preparation of phenanthrenes.     

Phosphine-free rhodium-catalyzed hydroarylation of diaryl acetylenes with boronic acids

Rh(CO)₂(acac) was found to be an efficient and simple catalyst in hydroarylation of diaryl acetylenes with boronic acids in the absence of phosphine ligand. Thus, triaryl-substituted olefins were prepared in good to excellent yields. No 1,4-rhodium shift was observed in the catalytic cycle.     

Aluminium trichloride-promoted tandem hydroarylation–ionic hydrogenation of 3-arylpropynoic acid derivatives and 4-phenylbut-3-yn-2-one

Reactions of 3-arylpropynoic acid derivatives and conjugated acetylene ketones with arenes and cyclohexane under the action of AlCl₃ at room temperature for 15 h afford the corresponding products of one-pot tandem hydroarylation–ionic hydrogenation of the acetylene bond of the starting compounds in 42–98% yields. This reaction is accompanied by aryl group exchange process under acidic conditions.     

Hydroarylation of acetylenes, acrylates, and isocyanates with heteroaromatic compounds under rhenium catalysis

With the aid of a directing group, an imine moiety, heteroaromatic compounds add to acetylenes in the presence of a catalytic amount of [ReBr(CO)₃(THF)]₂ at the adjacent position of the directing group regioselectively to give hydroarylation of the acetylenes in good to excellent yields. Similarly, heteroaromatic compounds react with acrylates and isocyanates to give the corresponding hydroarylation products under rhenium catalysis.     

Gold-catalyzed intramolecular hydroarylation of olefins. Scope evaluation and preliminary mechanistic studies

We report a gold-catalyzed intramolecular hydroarylation of unactivated olefins using a combination of AuCl₃/AgOTf as the catalytic system affording dihydrobenzopyrans, tetralins and tetrahydroquinolines in good yields. For our preliminary mechanistic studies, we have investigated the kinetic isotope effects with deuterated arene compounds and found that this catalytic hydroarylation is consistent with an electrophilic aromatic substitution process.     

Selectivity studies in the reaction between iodobenzene and phenylacetylene: Sonogashira coupling vs hydroarylation

The selectivity of the coupling reaction between iodobenzene and phenylacetylene was evaluated. Several palladium catalysts, ligands and reaction conditions were tested, showing that supported catalysts, room temperature or ionic liquids (NHC precursors) favor Sonogashira coupling, while the non‐supported ones, higher temperature and PPh₃ as ligand, favor hydroarylation. Neither excess of iodobenzene nor phenylboronic acids are required; and it is possible to avoid the use of PPh₃, although this lowers selectivity. Copyright © 2008 John Wiley & Sons, Ltd.     

Specific and non-specific interactions of hydropseudohalic acids with water and organic solvents

Partition coefficients P of the HNCS, HNCO and HN₃ hydropseudohalic acids between a number of organic solvents and water were determined. It has been found that log P increases with pKa of the acid and with the basicity of the solvent, but the effect of pKa on P is the smaller the more basic is the solvent. The relationships have been explained in terms of hydrogen bond formation between undissociated acid and solvent molecules. H-bonding between the pseudohalic acids and organic solvents has been confirmed by IR spectra on the example of HN₃ in benzene. Association constants for H-bonding between the three acids and water, benzene, dibutyl ether and tri-n-butyl phosphate were determined from partition data. It has been found that H-bonding increases with the strength of the acid, whereas the contribution to partition from non-specific interactions with water and organic solvents depends on the molecular surface area of the acid molecule.     

New hydrazinium salts of benzene tricarboxylic and tetracarboxylic acids—preparation and their thermal studies

Some new hydrazinium salts of benzene tricarboxylic and tetracarboxylic acids have been prepared by neutralisation of these acids with hydrazine hydrate in aqueous medium and characterised by conductance measurement, IR spectral and thermal analyses. Hemimellitic acid (H₃hml) forms monohydrazinium salt, trimellitic acid (H₃tml) and trimesic acid (H₃tms), mono and dihydrazinium salts, and pyromellitic acid (H₄pml) all the four salts with hydrazine hydrate. Conductance study indicates their electrolytic nature. IR spectra of all the salts show NN stretching frequencies of the N₂H₅⁺ in the region of 960-990 cm⁻¹. The hemimellitate salt undergoes endothermic dehydrazination at 154 °C, trimellitates and pyromellitates in the range of 191-271 °C, and trimesates in the range of 267-332 °C. Trimesates decompose to give CO₂ around 337 °C. All the salts then undergo strong exothermic decomposition in the range of 517-595 °C via the formation of respective acid intermediates first, then arenes, yielding carbon residue. A comparison of the thermal behaviour of pure acids with that of their salts reveals the fact that the acids do not withstand high temperature like salts. They show sharp endotherms at their melting points and then they decompose exothermally before 400 °C to give carbon residue.     

A bench-stable Pd catalyst for the hydroarylation of fullerene with boronic acids

A Pd(II) catalyst for the hydroarylation of fullerene with boronic acids is presented. Treatment of C60 with an arylboronic acid in the presence of a catalytic amount of Pd(2-PyCH=NPh)(OCOC6F5)2 in H2O/1,2-Cl2C6H4 at room temperature furnishes the hydroarylation product (Ar-C60-H) in good yield with high selectivity. This complex possesses high catalytic activity paired with bench stability in the solid state.     

Selective Hydroarylation of 1,3‐Diynes Using a Dimeric Manganese Catalyst: Modular Synthesis of Z‐Enynes

The transition‐metal‐catalyzed selective hydroarylation of unsymmetrical alkynes represents the state‐of‐art in organic chemistry, and still mainly relies on the use of precious late‐transition‐metal catalysts. Reported herein is an unprecedented Mn^I‐catalyzed hydroarylation of unsymmetrical 1,3‐diyne alcohols with commercially available arylboronic acids with predictive selectivity. This method addresses the challenges in regio‐, stereo‐, and chemoselectivity. It offers a general, convenient and practical strategy for the modular synthesis of multisubstituted Z‐configurated conjugated enynes. This protocol is distinguished by its operational simplicity, complete selectivity, excellent functional‐group compatibility, and gram‐scale potential. A dimeric Mn^I species, Mn₂(CO)₈Br₂, was proven to be a much more efficient catalyst precursor than Mn(CO)₅Br.     

First and mild synthesis of fluorene-9-malonic acid and some substituted derivatives via the intramolecular hydroarylation of 2-phenylbenzylidenemalonic acids

Hitherto unknown fluorene-9-malonic acid and some substituted derivatives were easily synthesized in very mild conditions through the intramolecular hydroarylation of 2-phenylbenzylidenemalonic acids issued from the corresponding biphenylcarboxaldehydes.     

Pt(II)-catalyzed hydroarylation reaction of alkynes with pyrroles and furans

A Pt(II) catalyst showed a drastic effect on hydroarylation of alkynes with pyrroles and furans compared with Pd(OAc)₂ catalyst. The hydroarylation reactions proceeded smoothly under mild conditions to give double-hydroarylation products in good yields. Mono-adducts were formed only when the second hydroarylation was inhibited by steric hindrance of substrates or low reactivity of the mono-adducts.