Engineered mesoporous ionic‐modified γ‐Fe2O3@hydroxyapatite decorated with palladium nanoparticles and its catalytic properties in water

A new mesoporous organic–inorganic nanocomposite was formulated and then used as stabilizer and support for the preparation of palladium nanoparticles (Pd NPs). The properties and structure of Pd NPs immobilized on prepared 1,4‐diazabicyclo[2.2.2]octane (DABCO) chemically tagged on mesoporous γ‐Fe₂O₃@hydroxyapatite (ionic modified (IM)‐MHA) were investigated using various techniques. The synergistic effects of the combined properties of MHA, DABCO and Pd NPs, and catalytic activity of γ‐Fe₂O₃@hydroxyapatite‐DABCO‐Pd (IM‐MHA‐Pd) were investigated for the Heck cross‐coupling reaction in aqueous media. The appropriate surface area and pore size of mesoporous IM‐MHA nanocomposite can provide a favourable hard template for immobilization of Pd NPs. The loading level of Pd in the nanocatalyst was 0.51 mmol g^?1. DABCO bonded to the MHA surface acts as a Pd NP stabilizer and can also lead to colloidal stability of the nanocomposite in aqueous solution. The results reveal that IM‐MHA‐Pd is highly efficient for coupling reactions of a wide range of aryl halides with olefins under green conditions. The superparamagnetic nature of the nanocomposite means that the catalyst to be easily separated from solution through magnetic decantation, and the catalytic activity of the recycled IM‐MHA‐Pd showed almost no appreciable loss even after six consecutive runs.     

Pd(OAc)2/DABCO-catalyzed Suzuki-Miyaura cross-coupling reaction in DMF

The scope and limitations of the Pd(OAc)₂/DABCO (1,4-diaza-bicyclo[2.2.2]octane)-catalyzed Suzuki-Miyaura cross-coupling reactions have been demonstrated. The results showed that the effect of solvent had a fundamental influence on the reaction. In the presence of Pd(OAc)₂ and DABCO, both aryl bromides and aryl chlorides all worked well with arylboronic acids to form biaryls, heteroaryl-aryls, and biheteroaryls in moderate to excellent yields using DMF as the solvent. Additionally, the reactions of aryl bromides were conducted under relatively mild conditions.     

Hierarchical TiO2 microspheres supported ultrasmall palladium Nanocrystals: A highly efficient catalyst for Suzuki reaction

A hierarchical titanium dioxide microspheres-supported palladium catalyst (Pd/TiO₂-350) was prepared and characterized using BET, XRD, XPS, SEM, EDX, and TEM analyses. An ICP-OES analysis of Pd/TiO₂-350 further confirmed the successful Pd immobilization on TiO₂ with a palladium loading of 0.1 mmol g^?1. Pd/TiO₂-350 efficiently catalyzed the Suzuki-Miyaura reaction of aryl iodides with arylboronic acids to give the corresponding biaryl derivatives in good to excellent yields. After the reaction, the catalyst was recovered by centrifugation and reused three times without significant loss of its catalytic activity. Moreover, the loading of palladium species further decreased to 0.001 mol%, and the total turnover number and turnover frequency of the catalyst reached as high as 99 000 and 0.57 s^?1, respectively.     

Piperazine‐ and DABCO‐bridged dinuclear N‐heterocyclic carbene palladium complexes: synthesis,structure and application to Hiyama coupling reaction

Four dinuclear N ‐heterocyclic carbene (NHC) palladium complexes were prepared by reaction of imidazolinium salts, PdCl₂ and bridging ligands (piperazine and DABCO) in one pot or by direct cleavage of the chloro‐bridged dimeric compounds [Pd(μ ‐Cl)(Cl)(NHC)]₂ with bridging ligands. All of the complexes were fully characterized using ¹H NMR, ¹³C NMR, high‐resolution mass and infrared spectroscopies, elemental analysis and single‐crystal X‐ray diffraction. The catalytic activities of the obtained palladium catalysts towards Hiyama coupling of aryl chlorides with phenyltrimethoxysilane were investigated and the results showed that the dinuclear palladium complexes were considerably active for the coupling reaction. Copyright © 2016 John Wiley & Sons, Ltd.     

MCM-41-supported bidentate phosphine palladium(0) complex as an efficient catalyst for the heterogeneous Stille reaction

A Stille coupling reaction of organostannanes with organic halides has been developed in the presence of a catalytic amount of MCM-41-supported bidentate phosphine palladium(0) complex (0.5 mol %) in DMF/H₂O (9:1) under air atmosphere in high yields. This polymeric palladium catalyst exhibits higher activity than Pd(PPh₃)₄ and can be reused at least 10 times without any decrease in activity.     

Synthesis and catalytic application of Pd complex catalysts: Atom‐efficient cross‐coupling of triarylbismuthines with haloarenes and acid chlorides under mild conditions

Palladium‐catalysed cross‐coupling reactions are some of the most frequently used synthetic tools for the construction of new carbon–carbon bonds in organic synthesis. In the work presented, Pd(II) complex catalysts were synthesized from palladium chloride and nitrogen donor ligands as the precursors. Infrared and ¹H NMR spectroscopic analyses showed that the palladium complexes were formed in the bidentate mode to the palladium centre. The resultant Pd(II) complexes were tested as catalysts for the coupling of organobismuth(III) compounds with aryl and acid halides leading to excellent yields with high turnover frequency values. The catalysts were stable under the reaction conditions and no degradation was noticed even at 150°C for one of the catalysts. The reaction proceeds via an aryl palladium complex formed by transmetallation reaction between catalyst and Ar₃Bi. The whole synthetic transformation has high atom economy as all three aryl groups attached to bismuth are efficiently transferred to the electrophilic partner.     

Palladium‐catalyzed carbonylation of quaternary ammonium halides to tertiary amides

Catalytic carbonylation of quaternary ammonium salts under anhydrous conditions was investigated using palladium catalyst. The carbonylation of tetramethylammonium iodide was chosen as a model reaction and studied systematically. Ligand‐free PdCl₂ showed efficient catalytic performance for this transformation. A palladium catalyst loading as low as 0.05 mol% was sufficient for high yield (96.9%) of N,N‐dimethylacetamide, corresponding to a turnover frequency of 242 h^?1. Under optimum conditions, several other quaternary ammonium halides were also carbonylated to corresponding tertiary amides in moderate to excellent yields. The catalytic activity of commercial palladium on activated carbon (Pd/C) catalyst was also evaluated. The Pd/C catalyst exhibited high activity for this carbonylation reaction and could be recycled six times with a slight decrease in activity. Furthermore, mechanistic considerations concerning Pd‐catalyzed carbonylation of quaternary ammonium halides were also discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

Finely dispersed palladium on silk‐fibroin as an efficient and ligand‐free catalyst for Heck cross‐coupling reaction

A palladium–fibroin complex (Pd/Fib.) was prepared by the addition of sonicated fibroin fiber in water to palladium acetate solution. Pd (OAc)₂ was absorbed by fibroin and reduced with NaBH₄ at room temperature to the Pd(0) nanoparticles. Powder‐X‐ray diffraction, scanning electron microscopy–energy‐dispersive X‐ray spectroscopy, Fourier transform‐infrared, CHN elemental analysis and inductively coupled plasma‐atomic emission spectroscopy were carried out to characterize the Pd/Fib. catalyst. Catalytic activity of this finely dispersed palladium was examined in the Heck coupling reaction. The catalytic coupling of aryl halides (‐Cl, ‐Br, ‐I) and olefins led to the formation of the corresponding coupled products in moderate to high yields under air atmosphere. A variety of substrates, including electron‐rich and electron‐poor aryl halides, were converted smoothly to the targeted products in simple procedure. Heterogeneous supported Pd catalyst can be recycled and reused several times.     

Solvent-free palladium-catalyzed addition of diaryl dichalcogenides to alkynes

Solvent-free palladium-catalyzed addition of diaryl disulfides and diselenides to terminal alkynes makes it possible to achieve high stereoselectivity and almost 100% yields in 10 min using only 0.1 mol.% catalyst. Both Pd(PPh₃)₄ and easily available Pd(OAc)₂ and PdCl₂ can be used in the reaction with an excess of triphenylphosphine. The catalyst and triphenylphosphine are readily recycled for repeated use. The study of the mechanism of the solvent-free catalytic reaction indicates that the process involves binuclear palladium complexes.     

PEG-400 promoted Pd(OAc)2/DABCO-catalyzed cross-coupling reactions in aqueous media

PEG-400 [poly(ethylene glycol-400)] was found to improve the Pd(OAc)₂/DABCO-catalyzed aqueous Suzuki-Miyaura and Stille cross-coupling reactions. In the presence of Pd(OAc)₂, DABCO, and PEG-400, a variety of aryl halides were coupled with arylboronic acids or organotin compounds efficiently to afford the corresponding cross-coupled products in moderate to excellent yields. The turnover numbers was up to 900,000 for the Suzuki-Miyaura reaction and up to 9800 for the Stille reaction. The catalyst system was also effective for Heck and Sonogashira cross-coupling reactions to some extent.     

Polycondensation of haloarylketones catalyzed by palladium compounds bearing N-heterocyclic carbene (NHC) ligands

Palladium-catalyzed α-arylation of ketones, which can efficiently give coupling products by using appropriate ligands and bases, could be applied to a polycondensation reaction. Stable N-heterocyclic carbenes (NHC) were used as favorable ligands coordinating the Pd catalysts, which were generated in situ from commercially available palladium compounds such as Pd(OAc)₂ and Pd₂(dba)₃ as suitable catalyst precursors in this polymerization. Using small amounts of binary catalysts, poly(aryl alkyl ketone)s were afforded in high yields from haloarylketones in the presence of a base. A primarily prepared palladium catalyst having an NHC ligand, [Pd(OAc)₂(NHC)], also efficiently catalyzed the polycondensation, whereas a palladium compound bearing two carbene ligands, [PdX₂(NHC)₂], did not.     

Recyclable and reusable Pd(OAc)2/DABCO/PEG-400 system for Suzuki-Miyaura cross-coupling reaction

[reaction: see text] A stable and efficient Pd(OAc)2/DABCO (triethylenediamine) catalytic system for Suzuki-Miyaura cross-coupling reaction has been developed. In the presence of Pd(OAc)2 and DABCO, coupling of aryl halides with arylboronic acids was carried out smoothly to afford good to excellent yields and high turnover numbers (TONs) (the maximal TONs were up to 960,000 for the reaction of 1-iodo-4-nitrobenzene with phenylboronic acid) using PEG-400 as the solvent. Moreover, the Pd(OAc)2/DABCO/PEG-400 system could be recycled and reused five times without any loss of catalytic activity for aryl iodides and bromides.     

Reactions of Pd-PEPPSI complexes with protic acids

The Pd-PEPPSI complexes widely used to catalyze numerous reactions eliminate the pyridine ligand on treatment with protic acids to give binuclear complexes [Pd(NHC)X₂]₂ with the Pd–X–Pd (X = Cl, Br, I) bridging bonds. The reaction proceeds with high yields (78–98%) and can be regarded as a preparative approach to binuclear complexes. A prolonged heat treatment of either Pd-PEPPSI complexes or binuclear [Pd(NHC)X₂]₂ complexes in the presence of strong protic acids results in the Pd–NHC bond cleavage to give azolium salts (proligands) and palladium salts.     

Synthesis of hydroporphyrins based on comparative studies of palladium-catalyzed and non-catalyzed approaches

Hydroporphyrins have been synthesized using both Pd-catalyzed and non-catalyzed approaches. Comparative studies of the reaction of tetrasubstituted porphyrins with organolithium reagents in the presence of and without palladium catalysts showed that depending on reagents, the catalyst structure and reactivity of the corresponding porphyrins, chlorins (β-hydroporphyrins) and/or porphodimethenes (meso hydroporphyrins) of 5,10-type can be prepared in reasonable yields. In the absence of Pd catalysts, the formation of chlorins is predominant in the reactions with aliphatic RLi while porphodimethenes are the main products in reactions with PhLi. The use of a palladium catalyst resulted in the formation of both types of hydroporphyrins and the selective formation of either β-mono- or disubstituted chlorins. Of special interest was the reaction of octaethylporphyrin. Here, reaction with t-BuLi in the presence of Pd(PPh₃)₄/CuI proceeded with complete regioselectivity for 5,10-porphodimethenes.     

Synthesis of γ-keto carboxylic acids from γ-keto-α-chloro carboxylic acids via carbonylation—decarboxylation reactions catalysed by a palladium system

A palladium-based catalytic system is highly active in the synthesis of γ-keto acids of type ArCOCH₂CH₂COOH via carbonylation-decarboxylation of the corresponding α-chloride. Typical reaction conditions are: P(CO) = 20–30 atm; substrate/H₂O/Pd = 100–400/800–1000/1 (mol); temperature: 100–110 °C; [Pd]=0.25 × 10⁻²−1 × 1O⁻² M; solvent: acetone; reaction time: 1–2 h. A palladium(II) complex can be used as catalyst precursor. Under the reaction conditions above, reduction of the precursor to palladium metal occurs to a variable extent. High catalytic activity is observed when the precursor undergoes extensive decomposition to the metal. Pd/C is also highly active. Slightly higher yields are obtainable when the catalytic system is used in combination with a ligand such as PPh₃. A mechanism for the catalytic cycle is proposed: (i) The starting keto chloride undergoes oxidative addition to reduced palladium with formation of a catalytic intermediate having a Pd-[CH(COOH)CH₂COPh] moiety. The reduced palladium may be the metal coordinated by other atoms of palladium and/or by carbon monoxide and/or by a PPh₃ ligand when catalysis is carried out in the presence of this ligand. It is also proposed that the keto group in the β-position with respect to the carbon atom bonded to chlorine weakens the CCl bond, easing the oxidative addition step and enhancing the activity of the catalyst. (ii) Carbon monoxide ‘inserts’ into the PdC bond of the above intermediate to give an acyl catalytic intermediate having a Pd-[COCH(COOH)CH₂COPh] moiety. (iii) Nucleophilic attack of H₂O to the carbon atom of the carbonyl group bonded to the metal of the acyl intermediate yields a malonic acid derivative as product intermediate. This, upon decarboxylation, gives the final product. Alternatively, the desired product may form without the malonic acid derivative intermediate, through the following reaction pathway: the acyl intermediate undergoes decarboxylation with formation of a different acyl intermediate, having a Pd-[CO-CH₂CH₂COPh] moiety, which, upon nucleophilic attack of H₂O on the carbon atom of the carbonyl group bonded to the metal, yields the final product.     

Synthesis of a new palladium salt using N‐benzyl DABCO chloride and its application in Suzuki reaction

A palladium catalyst was synthesized using N‐benzyl DABCO chloride and palladium chloride. The structure of this catalyst was characterized and then the catalyst was used in Suzuki cross‐ coupling reaction of different aryl halides with arylboronic acids. All substrates afforded the corresponding products in good to high yields in the presence of low amounts of the catalyst. Under the heating conditions employed, cheaper and more available aryl chlorides gave relatively high yields in the Suzuki reaction. Copyright © 2012 John Wiley & Sons, Ltd.     

Pd/Nb2O5: efficient supported palladium heterogeneous catalyst in the production of key intermediates for the synthesis of ‘sartans’ via the Suzuki reaction

Pd/Nb₂O₅ was prepared, characterized and tested in Suzuki-Miyaura cross-coupling reactions under ligand-free conditions. High yields and selectivities were observed within short reaction times and very low palladium loadings.     

Syntheses of indolo[3,2,1-d,e]phenanthridines and isochromeno[3,4-a] carbazoles: palladium catalyzed intramolecular arylation via C-H functionalization

A new synthetic route has been developed for the preparation of indolo[3,2,1-d,e]phenanthridines and isochromeno[3,4-a]carbazoles via palladium catalyzed intramolecular biaryl coupling reactions. The coupling reactions proceeded smoothly and in high yields under ligand-free conditions with the catalytic system Pd(OAc)₂/Cs₂CO₃/TBAB. Under optimized reaction conditions no halogen-reduced products were observed.     

Supported Palladium-Catalyzed Carbonylative Synthesis of Diaryl Ketones from Aryl Bromides and Arylboronic Acids

A palladium supported on graphitic carbon nitride (Pd/g-C₃N₄) catalyzed carbonylative reaction of aryl bromides and arylboronic acids by has been developed for the construction of diaryl ketones. Using benzene-1,3,5-triyl triformate (TFBen) as the CO source, the reaction proceeded well to give various diaryl ketones in moderate to good yields.     

(BeDABCO)2Pd2Cl6 (1‐benzyl‐4‐aza‐1‐azoniabicyclo[2.2.2]octane chloride) as a highly active catalytic system for the Stille cross‐coupling reaction under microwave irradiation

An efficient catalytic system using (BeDABCO)₂Pd₂Cl₆ was developed for the Stille cross‐coupling reaction. The substituted biaryls were produced in excellent yields in short reaction times using a catalytic amount of this catalyst in DMF at 120 °C. The ionic character of homogeneous catalyst and microwave irradiation and also DMF as microwave‐active polar solvent gave higher yields and shorter reaction times than conventional heating. Benzyl DABCO as an efficient ligand and also a quaternary ammonium salt had an efficient stabilizing effect on the Pd(0) species. Copyright © 2013 John Wiley & Sons, Ltd.