Interaction of some antibiotics with hydroxypropyl-β-cyclodextrin

The interaction between 19 antibiotics and hydroxypropyl--cyclodextrin (HPCD) was studied by reversed-phase thin-layer chromatography. HPCD formed inclusion complexes with 16 compounds, the complex always being more hydrophilic than the uncomplexed drug. The intensity of interaction significantly increased with increasing specific hydrophobic surface area of the guest molecule proving the preponderant role of hydrophobic interactions in inclusion complex formation. The intensity of the HPCD-drug interaction significantly decreased with increasing concentration of methanol in the environment indicating that methanol can also enter the cyclodextrin cavity and inhibits competitively the inclusion complex formation or the free energy of transfer from water to the HPCD cavity should be less negative at higher concentration of methanol in the aqueous medium.Dedicated to Professor József Szejtli.     

Investigation of monoterpenes complexation with hydroxypropyl-β-cyclodextrin

In this study, we investigated the inclusion complexation of 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) and eight monoterpenes (eucalyptol, geraniol, limonene, linalool, α-pinene, β-pinene, pulegone, and thymol) in aqueous solution and solid state. The formation constants (K _f) of inclusion complexes were determined using fluorescence spectroscopy and static headspace gas chromatography. The results indicated the formation of 1:1 inclusion complexes between HP-β-CD and all studied guests. A linear relationship was found between K _f values and the hydrophobic character of the monoterpenes expressed as logP. Solid complexes were prepared by the freeze-drying method in a 1:1 (HP-β-CD:monoterpene) molar ratio. Physicochemical characterization of solid inclusion complexes was carried out using Fourier transform infrared spectroscopy and differential scanning calorimetry. Finally, the encapsulation efficiency (EE%) of HP-β-CD was determined using HPLC analysis. Noticeable difference in the EE% was observed between monoterpene hydrocarbons and oxygenated monoterpenes. These results suggested that complexation with HP-β-CD could be a promising strategy to enlarge the application of monoterpenes in cosmetic, pharmaceutical and food industries.     

β-Cyclodextrin polymer promoted green synthesis of cinnamaldehyde to natural benzaldehyde in aqueous solution

An environmentally benign synthesis of natural benzaldehyde from cinnamaldehyde under mild conditions has been investigated with sodium hypochlorite as oxidant and β-cyclodextrin polymer as phase-transfer catalyst. The polymer showed excellent catalytic activity exhibiting 92% conversion and 62% selectivity to benzaldehyde at ambient pressure and at 70°C. This catalyst could be recovered and reused six times, and the catalyst efficiency remained unchanged, which suggests that the catalyst is an efficient and green catalyst for oxidation of cinnamaldehyde. The results reported herein may be a promising method in industry for the synthesis of natural benzaldehyde.     

Enhanced water-solubility of albendazole by hydroxypropyl-β-cyclodextrin complexation

The inclusion complexation of methyl (5-(propylthio)-1H-benzimidazol-2-yl) carbamate, albendazole (ABZ) with 2-hydroxypropyl--cyclodextrin (HPCD) in water was investigated with a view to improving the low aqueous solubility of the drug. The combination of albendazole and HPCD in a molar ratio of 1/10 resulted in a significant increase in the aqeous solublity of the drug, up to 3500 times. Albendazole/HPCD complexes could be recommended as a parenterally administered formulation because of its good solubility properties and the safety of the cyclodextrin used.     

H-β-zeolite catalyzed synthesis of β-bromostyrenes from styrene bromohydrins

Synthesis of β-bromostyrenes from styrene bromohydrins using H-β-zeolite as catalyst under moderate conditions is reported. The catalyst could be regenerated and reused up to three consecutive cycles.     

Preparation and characteristics of hydroxypropyl-β-cyclodextrin polymeric nanocapsules loading nimodipine

Nimodipine loaded hydroxypropyl-β-cyclodextrin polymeric nanocapsules were prepared by interfacial polyaddition of hydroxypropyl-β-cyclodextrin and isophorone diisocyante in a miniemulsion system. The effects of ultrasonicate times on the preparation of miniemulsion, the total amount of hydroxypropyl-β-cyclodextrin and isophorone diisocyante, and the molar ratio of isophorone diisocyante to hydroxypropyl-β-cyclodextrin on the capsule size and drug release behavior from capsule were investigated. The chitosan based polymeric nanocapsules were prepared as a control to study the effect of hydroxypropyl-β-cyclodextrin molecules in capsule matrix on the drug release. The results indicated that the droplet size of miniemulsion and capsule size decreased with increasing sonicate times. When the total amount of hydroxypropyl-β-cyclodextrin and isophorone diisocyante, and the molar ratio of isophorone diisocyante to hydroxypropyl-β-cyclodextrin were increased, the capsule as well, but the drug release rates from capsules became slower. The drug release behaviors from hydroxypropyl-β-cyclodextrin polymeric nanocapsules were affected by the drug diffusion through the polymer matrix and the formation of inclusion complex between drug and hydroxypropyl-β-cyclodextrin.     

Influence of hydroxypropyl-β-cyclodextrin on the photostability and antiradical activity of Trolox

Trolox (6-hydroxy-2,5,7,8-tetramethylchroman-2-carboxylic acid), a derivative of vitamin E, can undergo photolysis upon UV irradiation. In the present study the photodegradation kinetics of Trolox were thus investigated in different systems in the absence and in the presence of titanium dioxide, a physical sunscreen present in several cosmetic products, that can act as photocatalyst. In all the considered media Trolox degraded under UVB light following pseudo-zero order kinetics, probably by a mechanism of photooxidation. The rate of Trolox photodegradation was lower in O/W emulsions than in aqueous solution and in gel; furthermore it was significantly influenced by the presence of TiO₂. Aiming to increase Trolox stability, it was complexed with hydroxypropyl-β-cyclodextrin: the inclusion complex was characterized by phase solubility studies, spectrophotometry and differential scanning calorimetry. The irradiation experiments indicated that complexation with hydroxypropyl-β-cyclodextrin was effective in reducing the photodegradation rate of Trolox. Moreover the host molecule favored the uptake of Trolox into the porcine skin, as shown by in vitro permeation studies. Nevertheless the assay of peroxidation, based on the reaction of malondialdehyde with thiobarbituric acid, indicated that the antioxidant activity of Trolox was maintained even after inclusion in cyclodextrin.     

Physicochemical characterization of spray dried ternary micro-complexes of cefuroxime axetil with hydroxypropyl-β-cyclodextrin

The physicochemical properties of spray dried micro-complexes of cefuroxime axetil (CFA) with hydroxypropyl-β-cyclodextrin (HPβCD) in presence and/or absence of ternary components polyvinylpyrrolidone K30 (PVP K30), hydroxypropylmethylcellulose (HPMC), poloxamer 188 and/or polyethylene glycol 4000 (PEG 4000) along with Aerosil^®200 as an adsorbent were investigated. The phase solubility studies revealed A_L type of solubility curve in binary as well as ternary systems. The stability constant 382.70 ± 2.4 M^?1 of binary system i.e. CFA with HPβCD was significantly improved to 427.84 ± 3.8, 447.09 ± 4.3, 488.28 ± 4.6 and 502.21 ± 5.1 M^?1 in presence of PVP K30, HPMC, poloxamer 188 and PEG 4000 respectively indicating positive effect of their addition. The micro-complexes of CFA were characterized by Fourier transformation infrared spectroscopy, X-ray powder diffractometry, differential scanning calorimetry, scanning electron microscopy, particle size analysis, and dissolution. In all characterization studies, ternary systems performed better in comparison to binary systems as a result of synergistic effect of ternary complexation as well as particle size reduction achieved by a spray drying technology.     

Biomimetic approach for the synthesis of N,N’-diarylsubstituted formamidines catalyzed byβ-cyclodextrin in water

An environmentally benign and highly efficient biomimetic approach for the synthesis of N,N′-diarylsubstituted formamidines in water catalyzedβ-cyclodextrin is described under neutral condition with quantitative yields of products.β-Cyclodextrin has been recovered and reused.     

Study on inclusion interaction of hydrophilic 2-chloromandelic acid with hydroxypropyl-β-cyclodextrin

The inclusion interaction between hydroxypropyl-β-cyclodextrin (HP-β-CD) and hydrophilic 2-chloromandelic acid (CMA) was studied by ultraviolet (UV) absorption spectrophotometer. A reliable determination of the complex stoichiometry was provided by the continuous variation technique. ¹H NMR spectrum and Thermo-gravimetric/differential thermal analyzer (TG/DTA) techniques were explored to further characterize the inclusion complex, and molecular modeling was used to investigate the mechanism of inclusion interaction. The results showed that HP-β-CD reacted with R,S-CMA to form inclusion complexes, with 1:1 stoichiometry and inclusion stability constants K_R and K_S were 24 and 39 L/mol determined from UV data by the method of Benesi-Hildebrand’s. Molecular modeling confirmed experimental observation and indicated that the hydrogen bonding interaction plays an important role in the interactive inclusion between HP-β-CD and CMA. Besides, compared with the HP-β-CD, molecular modeling showed R, S-CMA interact with β-CD through different binding modes, in which Vander Waals is the main intermolecular force between β-CD and R-CMA (or S-CMA) while without obvious hydrogen bonding interaction.     

Preparation and evaluation of binary and ternary inclusion complexes of fenofibrate/hydroxypropyl-β-cyclodextrin

This study aimed to investigate the effect of hydroxypropyl methylcellulose on the complexation of fenofibrate and hydroxypropyl-β-cyclodextrin (HP-β-CD). Initially, phase solubility studies with an excess amount of drug in the HP-β-CD solutions with and without hydroxypropyl methylcellulose (HPMC) were investigated. Both of the binary and ternary complexes were prepared by ball-milling. The complexes were characterized by Fourier transform infrared spectroscopy (FI-IR), X-ray powder diffraction (XPRD), differential scanning calorimetry (DSC) and nuclear magnetic resonance spectroscopy (¹H-NMR). The A_L type phase-solubility diagram revealed that the complexes of fenofibrate and HP-β-CD were formed with molecular ratio of 1:1. The results of FT-IR, XPRD, DSC and ¹H NMR analysis show the formulation of inclusion complexes. In conclusion, the interaction occurrs between fenofibrate and HP-β-CD in the complexes, and the existence of HPMC effectively improves the complexation efficiency and stability constant. The in vitro dissolution test suggests ternary complex is superior to binary complex in terms of the release of fenofibrate.     

Complex formation of some nonionic surfactants with hydroxypropyl-β-cyclodextrin and with heptakis (2,6-di-O-methyl)-β-cyclodextrin

The interaction of six nonionic surfactants -[4-(1,1,3,3-tetra-methylbutyl)phenyl]--hydroxypoly(oxy-1,2-ethanediyl) with hydroxypropyl--cyclodextrin (HPCD) and dimethyl--cyclodextrin (DIMEB) was studied by reversed-phase thin-layer chromatography in the presence and absence of sodium chloride. Each surfactant formed complexes with both cyclodextrin derivatives; however, the strength of interaction varied considerably. DIMEB formed more stable inclusion complexes with the surfactants than did HPCD. A longer ethyleneoxide chain decreased the strength of interaction, whereas sodium chloride exerted a negligible impact. Principal component analysis indicated that both the hydrophobicity and the specific hydrophobic surface are of the surfactant influenced the complex formation indicating the hydrophobic character of the interaction.Dedicated to Professor József Szejtli.     

Controlled release of antifungal volatiles of thyme essential oil from β-cyclodextrin capsules

Thyme essential oil (TO) is a good antimicrobial agent, however, its high volatility and reactivity limits its application as food preservative. β-cyclodextrin (β-CD) is able to encapsulate organic molecules, forming host–guest complexes with hydrophobic and volatile molecules such as TO constituents, controlling volatility and reactivity. In addition, controlled released of the β-CD trapped compounds could be possible by exposing the capsules to high relative humidity (RH). With this in mind, the controlled release of antifungal volatiles throughout exposure of TO:β-CD capsules to high relative humidity was studied. Thymol (TOL) was the major constituent of TO, detected by gas chromatography before and after encapsulation. Capsules of the 8:92 ratio (TO:β-CD) showed the highest TOL content. Hydrogen bonds and hydrophobic interactions were detected between the oil constituent and β-CD by IR and ¹H NMR spectroscopy. During moisture sorption, the TO capsules showed a lower water uptake compared with free β-CD. Similar behavior was observed during water desorption. In all cases, a hysteresis process was observed when comparing sorption and desorption isotherms. At high RH, TOL is displaced and almost 76% is released to the headspace. The growth of Alternaria alternata was inhibited significantly by the addition and exposure to TO:β-CD as measured by both the agar dilution and the headspace method, respectively. Therefore, the encapsulation of antifungal volatile compounds as TO in β-CD, could be an alternative to control the release of natural antimicrobials that can be of interest to the agricultural area.     

Enhancement of aqueous solubility of tricyclic acyclovir derivatives by their complexation with hydroxypropyl-β-cyclodextrin

Solubilities of tricyclic acyclovir derivatives in buffered aqueous solutions of hydroxypropyl-β-cyclodextrin (HP-β-CD) at pH 5.5 and 7.0 were determined at 25 and 37 °C. Complexation of these compounds with HP-β-CD resulted in a noticeable increase of their solubility; nevertheless it was limited to tricyclic derivatives of acyclovir carrying an aryl substituent. Combination of ¹H NMR and DSC techniques demonstrated the existence of inclusion complexes between acyclovir derivatives and HP-β-CD. The stability constants, estimated using the Higuchi–Connors method, were found in the range of 10–100 M⁻¹. Additionally, the pK _a values at 25 °C and molar extinction coefficients in aqueous buffered solutions were also determined for all studied compounds.     

Thermodynamic study on inclusion complex formation of riboflavin with hydroxypropyl-β-cyclodextrin in water

The inclusion complex formation of riboflavin (RF) with hydroxypropyl-β-cyclodextrin (HP-β-CD) in water was investigated by ¹H NMR, UV-vis spectroscopy, and solubility methods. A 1:1 stoichiometry and thermodynamic parameters of complex formation (K, Δ_c G ⁰, Δ_c H ⁰, and Δ_c S ⁰) were determined. Complexation was characterized by negative enthalpy and entropy changes due to prevalence of van der Waals interactions and hydrogen bonding between polar groups of the solutes. A partial insertion of RF into macrocyclic cavity was revealed on the basis of ¹H NMR data and molecular mechanics calculation. Location of benzene ring of RF molecule inside the hydrophobic cavity of HP-β-CD results in an increase of aqueous solubility of the former.     

Effect of substitution degree of 2-hydroxypropyl-β-cyclodextrin on the alkaline hydrolysis of cinnamaldehyde to benzaldehyde

The yield of benzaldehyde in the 2-hydroxypropyl-β-cyclodextrin (2-HP-β-CD), with a low degree of substitution (DS = 3.9), catalytic system was 70%, which was higher than that of the system with 8.8 DS under the optimised conditions (323 K, 2% NaOH (w/v), cinnamaldehyde:2-HP-β-CD = 1:1 (molar ratio)). Due to the structural complementary effects of the host and guest, cyclodextrins (CDs) played the catalysis role in the reaction, which was confirmed by kinetic studies and solubilisation. The characterisation of NMR and fluorescence measurement suggested that the extent of hydroxypropyl substitution affected the cavity structure of the CD molecule. The hydroxypropyl groups at O₂ positions were spatially spread out but restricted, which affected the molecular encapsulation capabilities.     

Enhancement inhibition efficiency of PBTCA depending on the inclusion complex with hydroxypropyl-β-cyclodextrin

For the first time, hydroxypropyl-β-cyclodextrin (HP-β-CD) has been brought in to include 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTCA) in order to enhance inhibition efficiency of PBTCA, which leads a new approach to study oil–gas field corrosion inhibition in the process of acid treatment. Based on the host–guest inclusion reaction, the inclusion complex of PBTCA with HP-β-CD has been prepared in the laboratory. UV–Vis absorption spectrum was applied to study the inclusion behavior of PBTCA with HP-β-CD. The results revealed that PBTCA with HP-β-CD can form a 1:1 stoichiometry inclusion complex. The 1:1 inclusion complex synthesized by using lyophilization was further characterized by Fourier transform infrared spectroscopy. Besides, inhibition effect of the inclusion complex on the corrosion inhibition of Q235 carbon steel has been investigated in 0.1 M sulfuric acid (H₂SO₄) solution using potentiodynamic polarization, electrochemical impedance spectroscopy techniques and scanning electron microscopy (SEM). It was found that the presence of the inclusion complex better achieved the anti-corrosion property in aggressive medium than was the case with alone PBTCA and the highest inhibition efficiency of the inclusion complex over 90 % was obtained, which are suggestive of the active effect of the inclusion complex for improving inhibition efficiency of PBTCA. Meanwhile, the results obtained from SEM further showed that the inclusion complex acts as a more efficient corrosion inhibitor for Q235 carbon steel in H₂SO₄ medium.