Catalytic cyclometalation reaction of unsaturated compounds in synthesis of magnesa- and aluminacarbocycles

The investigation results on design and application of the new catalytic cyclometalation reaction of olefins, dienes, acetylenes and allenes with Al, Mg and halogen alkyls mediated by Ti or Zr based metallocene catalysts to produce novel classes of cyclic organometallics namely aluminacyclopropanes, aluminacyclopropenes, aluminacyclopentanes, aluminacyclopentenes, aluminacyclopenta-2,4-dienes, magnesacyclopentanes, magnesacyclopentenes, magnesacyclopenta-2,4-dienes as well as metallamacrocycles are summarized and systematized. Selected literature data on thermal synthesis of cyclic organoaluminum and organomagnesium compounds for comparison the efficiencies of catalytic and classic synthetic methods are given. Mechanistic aspects of catalytic cyclometalation of unsaturated compounds and chemical transformations of Al and Mg metallacycles are discussed.     

Combined cycloalumination of cyclic 1,2-dienes and olefins with EtAlCl2 in the presence of Cp2ZrCl2 catalyst

Catalytic intermolecular cycloalumination of cyclo-1,2-dienes and olefins assisted by EtAlCl₂ in the presence of Cp₂ZrCl₂ as catalyst gave rise to unsaturated di- and polycyclic aluminacarbocycles.     

The first one-pot synthesis of alkoxycyclopropanes via cyclometalation of styrene with ClnAlEt3−n and RCO2R′ mediated by Cp2ZrCl2

The one-pot cyclopropanation of styrene using Cl_nAlEt_3−n (Et₂AlCl, EtAlCl₂, AlCl₃) and carboxylic esters in the presence of Cp₂ZrCl₂ as catalyst gives rise to alkoxycyclopropanes.     

α-Fluorinated cyclic amidophosphite ligands. Their synthesis, Rh complexes and catalytic activity in the hydroformylation of styrene

The synthetic approaches to cyclic phosphite and amido(diamido)phosphite ligands bearing the residues of electron withdrawing perfluorinated tails at the β-position to the phosphorus atom have been elaborated. Catalytic systems based on rhodium complexes of these ligands formed in situ using Rh(CO)₂(acac) as a catalytic precursor demonstrate high activity in the hydroformylation of styrene along with good selectivity in respect to branched aldehyde. Quantum-chemical calculations proved that both the rate of the formation of branched alkyl complex, as well as its reactivity are influenced by the steric and electronic parameters in the same manner.     

Titanium(IV) complexes with monocyclopentadienyl and phenoxy-alkoxo ligands: Synthesis,structures and catalytic properties for ethylene polymerization

Three monochlorotitanium complexes Cp′Ti(2,4-^tBu₂-6-(CPh₂O)C₆H₂O)Cl [Cp′ = η⁵-C₅H₅ (2), η⁵-C₅(CH₃)₅ (3), η⁵-C₅H₂Ph₂CH₃ (4)] have been synthesized in high yields (>90%) by the reaction of corresponding Cp′TiCl₃ with the dilithium salt of ligand 2,4-^tBu₂-6-(CPh₂OH)C₆H₂OH (1). When activated by [Ph₃C]⁺[B(C₆F₅)₄]⁻ and AlⁱBu₃, complexes 2–4 exhibit reasonable catalytic activity for ethylene polymerization, producing polyethylenes with moderate molecular weights and melting points. Addition of excess water to complex 2 gave the oxo-bridged complex [Ti(η⁵-C₅H₅)(2,4-^tBu₂-6-(CPh₂O)C₆H₂O)]₂O (5). Complexes 4 and 5 were characterized by single crystal X-ray diffraction.     

Developments in transfer hydrogenations of aromatic ketones catalyzed by boron compounds

Boron complexes BL1 and BL2 were prepared from O-donor ligands, 2,2′-(1E,1′E)-(ethane-1,2-diylbis(azan-1-yl-1-ylidene))bis(methane-1-yl-1-ylidene)diphenol (L1) and 2,2′-(propane-1,3-diylbis(azan-1-yl-1-ylidene))bis(methane-1-yl-1-ylidene)diphenol (L2). The complexes were fully characterized by ¹H and ¹³C NMR, LC-MS/MS, TGA/DTA, UV-Vis, elemental analysis, SEM, and FTIR. The transfer hydrogenation of acetophenone derivatives was investigated by the boron complexes in the presence of isoPrOH, as the hydrogen source, under basic condition with NaOH. The results showed that the boron complexes were promising catalytic precursors for transfer hydrogenation of aromatic ketones in 0.1 M isoPrOH solution (up to 99%). Both steric and electronic factors of this class of molecules had a significant impact on the catalytic properties.     

Synthesis and crystal structure of a new oxamidato-bridged trinuclear Cu2 II MnII complex containing a macrocyclic ligand

A new oxamidato-bridged trinuclear complex [(CuL)₂Mn](ClO₄)₂ (H₂L = 2,3-dioxo-5,6,14,15-dibenzo-1,4, 8,12-tetraazacyclo-pentadeca-7,3-dien)] was prepared and its structure determined. The complex is monoclinic, space group P2₁/n, with a = 10.625(3), b = 11.602(3), c = 16.020(5)?Å, β = 91.031(5)°, Z = 2; it was refined to R1 = 0.0555. In the solid state, the structure consists of centrosymmetric [(CuL)₂Mn]²⁺ cations separated by perchlorate anions; the central manganese atom is four coordinated with square planar geometry.     

Construction of metal-organic frameworks through coordination and hydrogen bonding interactions: Syntheses, structures and photoluminescent properties of metal complexes with macrocyclic ligand

A macrocyclic ligand L with two diethylenetriamine units linked by two rigid biphenylene spacers was used as building block for construction of metal-organic frameworks. A silver(I) complex with macrocyclic and open-chain mix-type ligands [Ag₂(L)(L′)](ClO₄)₂ (1) [L′=1,6-bis(4-imidazol-1′-ylmethylphenyl)-2,5-diazahexane] was obtained by reaction of L and L′ together with AgClO₄·H₂O. It is interesting that the open-chain tetradentate ligand L′ only served as a bidentate ligand to bridge the Ag₂L units into an infinite one-dimensional (1D) cationic chain. Neutral 1D chain coordination polymer [Cu₂(L)(μ-SO₄)₂]·3H₂O·3MeOH (2) is formed by sulfate bridges between the neighboring Cu₂L units. When L reacted with nickel(II) sulfate instead of copper(II) sulfate, a monomacrocycle molecular complex [Ni₂(L)(H₂O)₄(SO₄)₂] (3) was obtained in which the sulfate anion acts as monodentate ligands rather than as bridges. When Cd(II) salts were used for the reactions with L, another two neutral 1D coordination polymers, [Cd₂(L)(μ-Cl)₂Cl₂]·2H₂O (4) and [Cd₂(L)(μ-Br)₂Br₂] (5), with the same structure were isolated. All the synthesized complexes exhibit three-dimensional framework structures linked by various hydrogen bonds. The photoluminescent properties of the synthesized complexes were studied in the solid state at room temperature, and the Ag(I) and Cd(II) complexes were found to show strong blue luminescence.     

Synthesis, crystal structures and catalytic abilities of new macrocyclic bis-pyridineamido Mn and Fe complexes

A new macrocyclic ligand H₂L (H₂L = 1,2-[bis(6′-pyridine-2′-carboxamido)-ethane]benzene) has been designed and synthesized by condensation of pyridine-carboxylic acid and diamine. Its Mn(III) and Fe(III) complexes, [Mn(L)Cl (DMF)] and [Fe(L)Cl], were prepared and respectively characterized by IR, UV-Vis, ESI-Mass, elemental analysis and X-ray single crystal diffraction. The catalytic abilities of them were examined, and up to 95% yield was achieved in epoxidation of styrene. The preliminary investigation of catalytic mechanism by manganese complex was carried out, suggesting the involvement of Mn(V) oxo species during catalysis.     

The catalytic hydration of nitriles to amides using a homogeneous platinum phosphinito catalyst

New homogeneous catalysts for the hydration of nitriles to amides are described. The catalyst precursors are coordination compounds of Pt(II) with secondary phosphine oxides. They contain a hydrogen bridged mono-anionic didentate phosphinito group, together with a third phosphine oxide ligand and a monodentate anionic ligand, either hydride or chloride. Reacting the chloride with silver ion, or the hydride with water gives a cationic species which is the active catalyst. On coordination to the cation the nitrile becomes susceptible to nucleophilic attack. The hydrolysis gives the amide as the sole product, and there is no tendency towards further hydrolysis to the acid. The effects of substituents on phosphorus are investigated, and a reaction mechanism is suggested. The most active catalyst, [PtH(PMe₂OH)(PMe₂O)₂H], 2a, is derived from dimethylphosphine oxide, and this precursor catalyses the hydration of acrylonitrile to acrylamide with a turnover number of 77,000, without addition to the C=C double bond.     

Synthesis and characterization of three Cd(II) Schiff-base macrocyclic N3O2 complexes

Three polyamine ligands of N1-(2-nitrobenzyl)-N1-(2-aminoethyl)ethane-1,2-diamine (L₁), N1-(2-nitrobenzyl)-N1-(2-aminoethyl)propane-1,3-diamine (L₂) and N1-(2-nitrobenzyl)-N1-(3-aminopropyl)propane-1,3-diamine (L₃) were synthesized and their cyclocondensation with 2-[2-(2-formyl phenoxy)ethoxy]benzaldehyde (L₄) in the presence of various metal(II) ions was examined. These reactions only in the presence of a stoichiometric amount of cadmium(II) nitrate gave the related cadmium(II) macrocyclic Schiff-base complexes. In all the other cases no cyclic complexes have been obtained and metal(II) polyamines were the only products. The complexes have been studied with IR, ¹H NMR, ¹³C NMR, DEPT, COSY, HMQC and microanalysis. The crystal structures of [Cd(NO₃)(L₅)(μ-NO₃)Cd(NO₃)(L₅)]0.5Cd(NO₃)₄ (1) and [CdL₅(NO₃)(CH₃OH)]ClO₄ (2) have been also determined.     

Synthesis, structural characterization and electrochemical studies of new macrocyclic Schiff base containing pyridine head and its metal complexes

A new macrocyclic ligand, 1,3,5-triaza-2,4:7,8:13,14-tribenzo-9,12-dioksa-cyclopentadeca-1,5-diene was synthesized by reaction of 2,6-diaminopyridine and 1,2-bis(2-carboxyaldehyde phenoxy)ethane. Then, its Cu(II), Ni(II), Pb(II), Co(III) and La(III) complexes were synthesized by the template effect by the reaction of 2,6-diaminopyridine and 1,2-bis(2-carboxyaldehyde phenoxy)ethane and Cu(NO₃)₂ · 3H₂O, Ni(NO₃)₂ · 6H₂O, Pb(NO₃)₂, Co(NO₃)₂ · 6H₂O, La(NO₃)₃ · 6H₂O, respectively. The ligand and its metal complexes have been characterized by elemental analysis, IR, ¹H and ¹³C NMR, UV-Vis spectra, magnetic susceptibility, thermal gravimetric analysis, conductivity measurements, mass spectra, and cyclic voltammetry. All complexes are diamagnetic and Cu(II) complex is binuclear. The Co(II) was oxidized to Co(III). The comparative electrochemical studies show that the nickel complex exhibited a quasi-reversible one-electron reduction process, while copper and cobalt complexes gave irreversible reduction processes in DMSO solution.     

Synthesis and crystal structure of some new cadmium (II) macrocyclic Schiff-base complexes containing piperazine moiety

The metal templated Cd(II) cyclocondensation of 2,6-diacetylpiridine or 2,6-pyridinedicarbaldehyde and two different amines containing piperazine moieties have been investigated. The resulting ligands, L¹ and L² are 16- and L³ and L⁴ 17-membered pentaaza macrocycles. The complexes have been characterized by a variety of methods including IR, ¹H, ¹³C NMR, DEPT, COSY(H,H), HMQC(H,C), FAB spectrometry and conductivimetry measurements. The crystal structures of [CdL²Cl](CH₃OH)ClO₄ (2) and [CdL⁴(NO₃)(H₂O)]ClO₄ (4) have been also determined, and it was shown that the geometry of the Cd(II) ion in the complexes is slightly distorted pentagonal pyramidal and pentagonal bipyramidal, respectively. The gas-phase structures of ligands, L² and L⁴ and their Cd(II) complexes have also theoretically studied.     

Synthesis and spectroscopic characteristics of σ-vinyl derivatives of platinum(<Emphasis Type="SmallCaps">IV</Emphasis>) chloride complexes

A procedure was developed for the synthesis of previously unknown β-chlorovinyl derivatives of Pt^IV chloride complexes by chloroplatination of terminal alkynes catalyzed by Pt^II chloride complexes. The reaction is highly stereoselective and gives only the products of trans-anti-addition of platinum and chlorine atoms. The regioselectivity of the catalytic reaction formally corresponds to Markovnikov’s rule, e.g., in alkynes containing electron-donating substituents, platinum attacks the terminal carbon atom. The σ-vinyl derivatives of Pt^IV chloride complexes were characterized by IR spectroscopy and ¹H and ¹³C NMR spectroscopy. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2380–2384, October, 2005.     

Synthesis,Characterization, and Catalysis of Water-Soluble Trimeric and Monomeric Palladium Complexes of 8-Aminoquinolines

New water soluble neutral and cationic palladium complexes were synthesized using 8-aminoquinoline (8-AQ) and 2-methyl 8-aminoquinoline (2-Me 8-AQ) ligands and their catalytic properties were evaluated. The neutral trimeric complexes having a Pd₃N₃ core were found to form when Pd(OAc)₂ was reacted with 8-AQ or 2-Me 8-AQ irrespective of the stoichiometry between the 2 reagents. Controlled addition of triflic acid to the neutral trimeric complex resulted in the formation of a trimeric cationic palladium complex as well as a monomeric cationic complex. A cationic palladium complex having two units of 2-Me-8AQ ligand was also synthesized from the cationic monomeric complex. Crystal structures of the new palladium complexes are reported in this study. The water-soluble neutral palladium complex showed catalytic activity for the oxidation of benzyl alcohols to benzaldehydes, while the cationic palladium complexes were found to be efficient catalysts for the oxidation of styrenes to methyl ketones.     

Synthesis of benzofurans through coupling of dienylacetylenes with carbene complexes: total synthesis of egonol

The reaction of various carbene complexes with dienylacetylenes has been examined. The reaction has been used as the cornerstone for the preparation of the nor-neolignan natural product egonol in five steps from readily available components. In most examples of the carbene-alkyne coupling, the reaction proceeds to form benzofuran derivatives. In the case of one highly functionalized terminal alkyne, a competing rearrangement/cyclization process occurs in preference to the carbene coupling process. The use of silylated alkynes subverts this process.     

Synthesis and spectroscopic characterization of a new macrocyclic Schiff base formed by the reaction of 1,5- bis (2-formylphenyl)pentane and 2,6-diaminopyridine,and a study of its metal complexes

A new dialdehyde 1,5-bis(2-formylphenyl)pentane was synthesized from 1,5-dibromopentane with salicylaldehyde and K₂CO₃; macrocyclic ligand was synthesized by reaction of 2,6-diaminopyridine and 1,5-bis(2-formylphenyl)pentane. Cu(II), Ni(II), Pb(II), Zn(II), Cd(II) and La(III) complexes were synthesized by reaction of the ligand and Cu(ClO₄)₂ · 6H₂O, Ni(ClO₄)₂ · 6H₂O, Pb(ClO₄)₂ · 6H₂O, Zn(ClO₄)₂ · 6H₂O, Cd(ClO₄)₂ · 6H₂O and La(ClO₄)₃ · 6H₂O, respectively. The ligand and its metal complexes have been characterized by elemental analysis, IR, ¹H and ¹³C NMR, UV–Vis spectra, magnetic susceptibility, conductivity measurements and mass spectra. All complexes are diamagnetic and Cu(II) complex is binuclear.     

Synthesis of 2-methyl-4-methoxydiphenylamine by palladium catalyzed C-N coupling—high synthetic versatility by use of a flexible catalytic system

The synthetic versatility of the Buchwald-Hartwig Amination is demonstrated by the synthesis of the industrially important intermediate 2-methyl-4-methoxydiphenylamine. Using four routes differing in the choice of the starting materials, the diarylamine could be synthesized in excellent yields, however, each reaction required a different combination of ligand, base and solvent. This new approach is compared to established industrial routes.     

Synthesis and magnetism of the first tetranuclear copper(II)–iron(III) complexes of macrocyclic oxamides

Four novel tetranuclear macrocyclic complexes of the formula [(CuLⁱ)₃Fe](ClO₄)₃·3H₂O (i=1–4, Lⁱ are the dianions of the [14]N₄ and [15]N₄ macrocyclic oxamides, namely 2,3-dioxo-5,6:13,14-dibenzo-7,12-bis(ethoxycarbonyl)-1,4,8,11-tetraazacyclotetradeca-7,11-diene, 2,3-dioxo-5,6:13,14-dibenzo-9-methyl-7,12-bis(ethoxycarbonyl)-1,4,8,11-tetraazacyclotetradeca-7,11-diene and 2,3-dioxo-5,6:14,15-dibenzo-7,13-bis(ethoxycarbonyl)-1,4,8,12-tetraazacyclotetradeca-7,12-diene] have been prepared and characterized. These complexes are the first examples of oxamido-bridged Cu(II)–Fe(III) heterometallic species. Cryomagnetic studies on [(CuL¹)₃Fe](ClO₄)₃·3H₂O (1) and [(CuL³)₃Fe](ClO₄)₃·3H₂O (3) (77–300 K) revealed that the Cu(II) and Fe(III) ions interact antiferromagnetically through the oxamido bridge, with the exchange integral J=−30.8 cm⁻¹ for 1 and J=−28.7 cm⁻¹ for 3 based on . The interaction parameters have been compared with that of the related [Cu₃Mn] compound.