Copper catalyzed 1,3-dipolar cycloaddition reaction of azides with N-(2-trifluoroacetylaryl)propargylamines: A mild entry to novel 1,4-disubstituted-[1,2,3]-triazole derivatives

The synthesis of N-(2-trifluoroacetylaryl)propargylamines 10-14 and 17 is presented. The copper(I) catalyzed cycloaddition reaction of these propargylamines (dipolarophiles) with a series of azides (1,3-dipoles) 18-20, 21 and 24 was found to proceed smoothly in dimethylsulfoxide at room temperature, to furnish the corresponding 1,4-disubstituted-[1,2,3]triazole derivatives 26-36 in moderate to good yields.     

Selective synthesis of bis[1,2]dithiolo[1,4]thiazines from 4-isopropylamino-5-chloro-1,2-dithiole-3-ones

Reaction of 4-isopropylamino-5-chloro-1,2-dithiole-3-ones 3 and S₂Cl₂ in acetonitrile gave selectively 3-oxo-bis[1,2]dithiolo[1,4]thiazine-5-thiones 1 by the addition of triethylamine and bis[1,2]dithiolo[1,4]thiazine-3,5-diones 5 under the action of formic acid. 3,5-Diones 5 were also obtained by intramolecular cyclization of N,N-bis(5-chloro-3-oxo[1,2]dithiol-4-yl)amines 6 with S₂Cl₂ in the presence of Et₃N.     

Synthesis of di-substituted calix[4]arene-based receptors for extraction of chromate and arsenate anions

The article describes the synthesis of a family of novel calix[4]arene ionophores, 25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5a), 25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5b) and two chromogenic calix[4]arenes, 5,17-dinitro-25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5c), 5,17-dinitro-25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5d) bearing pyridinium units. In the synthesis, the upper and lower rims of p-tert-butylcalix[4]arene were modified in order to acquire binding sites for the recognition of arsenate and dichromate anions. It has been observed that protonated alkylammonium forms of the ionophores showed high affinity toward dichromate and arsenate anions.     

New emissive fac-tricarbonylchlorobis(ligand)rhenium(I) complexes prepared from pyridine/thiophene hybrid ligands

Stille coupling between tributyl-(2,3-dihydro-thieno[3,4-b][1,4]dioxin-5-yl)-stannane and 4-bromopyridine resulted in the preparation of the new pyridine/thiophene hybrid ligand 4-(2,3-dihydro-thieno[3,4-b][1,4]dioxin-5-yl)-pyridine [4-py-EDOT] (1). Reaction of 1, 4-thiophen-2-yl-pyridine (2), or 4-[2,2^′]bithiophenyl-5-yl-pyridine (3) with ClRe(CO)₅ resulted in the isolation of complexes 4-6, ClRe(L)₂(CO)₃, where L=1, 2, or 3 respectively. The solid-state structure of 4 was determined by X-ray crystallography, which clearly shows the fac arrangement of the three CO ligands and the two 4-py-EDOT ligands arranged cis to one another. The metal complexes 4-6 have been characterized by ¹H and ¹³C NMR, ESI or FAB MS, FTIR, UV-Vis, fluorescence, and elemental analysis.     

A novel and convenient method for the synthesis of new derivatives of pyrido[3,2-e]pyrrolo[1,2-a][1,4]diazepine-6,11-dione

A novel methodology has been developed for the efficient synthesis of 1,4-pyridopyrrolodiazepine derivatives. The key reaction is the bromination under mild conditions by NBS of compounds resulting via peptide coupling of l-proline methyl ester with 3-aminopyridine-2-carboxylic acid 1, then intramolecular cyclization in the construction of 2-bromo-6a,7,8,9-tetrahydro-5H-pyrido[3,2-e]pyrrolo[1,2-a][1,4]diazepine-6,11-dione 4. This latter is then engaged in cross-coupling reactions to generate 1,4-pyridopyrrolodiazepines derivatives 5a-m, 6a-i, 7, and 8a-c. This strategy provides an efficient method to access a library of compounds based on privileged substructures that are of great interest in drug discovery.     

Synthesis and reactivity of pyrrolo[3,2-d][1,3]oxazine-2,4-dione. Access to new pyrrolo[3,2-e][1,4]diazepine-2,5-diones

A convenient synthesis of pyrrolo[3,2-d][1,3]oxazine-2,4-dione 4 is described and its reactivity towards various nucleophiles studied. The regioselective ring opening of anhydride 4 or its N-alkylated analog 25 in the presence of alanine or proline afforded, respectively, imidazolidinedione 22 and N-protected pyrrolo[3,2-e][1,4]diazepines 30 and 31 in a one-pot process. In a last part of this study, an alternative route to produce a library of eight non protected pyrrolo[3,2-e][1,4]diazepine-2,5-diones 35a–h is described to overcome the limited reactivity of anhydride 4.     

Stoichiometry-controlled cycloaddition of azomethine ylide with dipolarophiles: chemoselective and regioselective synthesis of bis- and tris-spirooxindole derivatives

A new series of bis- and tris-spirooxindole derivatives have been synthesized by controlling the molar equivalent of in situ generated azomethine ylides in [3+2]-cycloaddition reactions with dipolarophiles. The structural elucidation on the basis of IR, ¹H NMR, ¹³C NMR, and mass spectral data of these compounds established the highly chemoselective and regioselective formation of spirooxindole derivatives. Single crystal X-ray analysis of compound 4g and 2D NMR analysis of compound 5a confirmed the structures of bis- and tris-spirooxindole derivatives.     

Stabilization of (N-methyleneamino)imidoylketenes: synthesis of dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazines

Thermolysis of substituted methyl 1-methyleneamino-4,5-dioxo-4,5-dihydro-1H-pyrrole-2-carboxylates 2a,b led to substituted dimethyl 3,9-dioxo-1,5,7,11-tetrahydro-1H,7H-dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazine-1,7-dicarboxylates 4a,b and methyl 2,5-dihydro-5-oxo-1H-pyrazole-3-carboxylates 5a,b as minor products. The structure of compound 4a was determined by X-ray crystallography. The proposed mechanism of this conversion includes generation of (N-methyleneamino)imidoylketenes 6a,b and its intramolecular transformation to azomethine imines—5-oxo-2,5-dihydropyrazole-1-methylium-2-ides 7a,b, which undergo dimerization in head-to-tail manner yielding products 4a,b and partially hydrolyse to compounds 5a,b.     

Synthesis of sulfur containing analogues of the soluble guanylate cyclase inhibitor 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazin-1-one NS2028

Sulfur analogues of the soluble guanylate cyclase (sGC) inhibitor NS2028 1a are synthesized. Treating 8-bromo-2H-benzo[b][1,4]oxazin-3(4H)-one oxime (6) with 1,1′-thiocarbonyldiimidazole (1.1 equiv) gave the carbamothioate 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazine-1-thione (3a) in 83% yield. Alternatively reacting NS2028 1a with P₂S₅ (0.5 equiv) affords the carbamothioate 3a in 80% yield. Similar treatment of 8-aryl substituted NS2028 analogues 1b-d with P₂S₅ gave the carbamothioates 3b-d in 64-91% yields. Although quite stable, the carbamothioates 3a-d could be thermally isomerized in the presence of Cu (10 mol %) to afford the thiocarbamates 4a-d in high yields. Interestingly, in the case of carbamothioate 3a Pd and In metals also facilitated the isomerization. Furthermore, treatment of the thiocarbamates 4a-d with P₂S₅ (0.5 equiv) affords the carbamodithioates 5a-d in 72-89% yields. All new compounds are fully characterized including single crystal X-ray data for carbamothioate 3a and thiocarbamate 4a. Finally, a mechanism is proposed for the carbamothioate to thiocarbamate isomerization.     

Synthesis and dichromate anion extraction ability of p-tert-butylcalix[4]arene diamide derivatives with different binding sites

The article describes the synthesis and evaluation of the dichromate anion (Cr₂O₇²⁻/HCr₂O₇⁻) extraction properties of p-tert-butylcalix[4]arene diamide derivatives (5-7) containing different binding sites. Among these compounds, 6 and 7 have been synthesized via aminolysis in a toluene-methanol solvent system with 3-aminomethylpyridine and 3,6-dioxa-1,8-diamino octane, respectively. On the other hand, compound 5 has been synthesized via an acid chloride method due to its inefficiency under aminolysis. The extraction properties of these diamides toward dichromate anions are studied by liquid-liquid extraction. The results show that p-tert-butylcalix[4]arene diamide derivative 7 exhibited a much higher affinity toward dichromate anions than that of 6 due to its special structure, while 5 was an ineffective ligand for these anions.     

A one-step route to azomethine ylides via chloroiminium salts

A new, one-step procedure for the generation of azomethine ylides, 4 and 20, via chloroiminium salts, 3 and 19, is reported. The generation of the azomethine ylides was confirmed by their trapping with dimethyl acetylenedicarboxylate (DMAD) which, upon spontaneous 1,4-dehydrochlorination, gave the corresponding pyrroles 17 and 21.     

New receptors for anions in water: Synthesis, characterization, X-ray structures of new derivatives of 5,11,17,23-tetraamino-25,26,27,28-tetrapropyloxycalix[4]arene

Syntheses and characterization of ten new compounds from the calixarene family, cone - 5,11,17,23- tetrakis(2-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4a; cone - 5,11,17,23-tetrakis(3-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4b; cone - 5,11,17,23-tetrakis(4-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4c; cone - 5,11,17,23-tetrakis(ferrocenylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4d; cone - 5,11,17,23-tetrakis(2-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3a; cone - 5,11,17,23-tetrakis(3-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3b; cone - 5,11,17,23-tetrakis(4-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3c; cone - 5,11,17,23-tetrakis(ferrocenylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3d; cone - 5,11,17,23-tetrakis(2-thienylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3e and cone - 5,11,17,23-tetrakis(2-pyrrolylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3f are reported. The target compounds 4a-4d were designed to form complexes with anions based on hydrogen bonds and electrostatic interactions in acidic aqueous solutions and the interaction constant 1770 mol⁻¹ dm³ of a 1:1 complex was obtained for the interaction of 4c with sulfate anion in 5 × 10⁻³ M aqueous HCl. The solid state structures of the compounds 3b, 3e and 3f were determined, their stereochemistry and the stereochemistry of the calix[4]arene frame is generally discussed. Raman, infrared and UV-vis spectra of the target compounds and some intermediates are reported, too.     

Silicon-carbon unsaturated compounds. 73. Photolysis of cis- and trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane in the presence of tert-butyl alcohol and acetone

Irradiation of cis-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1a) in the presence of tert-butyl alcohol in hexane with a low-pressure mercury lamp bearing a Vycor filter proceeded with high stereospecificity to give cis-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2a), in 33% isolated yield, together with a 15% yield of 1-[(tert-butoxy)methylphenylsilyl]-4-(methylphenylsilyl)butane (3). The photolysis of trans-1,2-dimethyl-1,2-diphenyl-1,2-disilacyclohexane (1b) with tert-butyl alcohol under the same conditions gave stereospecifically trans-2,3-benzo-1-tert-butoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (2b) in 41% isolated yield, along with a 12% yield of 3. Similar photolysis of 1a and 1b with tert-butyl alcohol-d₁ produced 2a and 2b, respectively, in addition to 1-[(tert-butoxy)(monodeuteriomethyl)(phenyl)silyl]-4-(methylphenylsilyl)butane. When 1a and 1b were photolyzed with acetone in a hexane solution, cis- and trans-2,3-benzo-1-isopropoxy-1,4-dimethyl-4-phenyl-1,4-disilacyclooct-2-ene (4a and 4b) were obtained in 25% and 23% isolated yield. In both photolyses, 1-(hydroxymethylphenylsilyl)-4-(methylphenylsilyl)butane (5) was also isolated in 4% and 5% yield, respectively. The photolysis of 1a with acetone-d₆ under the same conditions gave 4a-d₆ and 5-d₁ in 18% and 4% yields.     

Azobenzene-bridged calix[8]arenes

An azobenzene bridge was introduced into the lower (or smaller) rim of p-tert-butylcalix[8]arene (1) and 1,5-calix[8]crown-3 (2) to form 1,4-singly bridged (3) and 1,5:3,7-doubly bridged (4) calix[8]arene derivatives, respectively. Trans and cis isomers of conformationally rigid 4 were isolated. The quantum yields of the trans-cis photoisomerisation reactions have been measured.     

Functionalized fluoroalkyl heterocycles by 1,3-dipolar cycloadditions with γ-fluoro-α-nitroalkenes

Differently fluorinated γ-fluoro-α-nitroalkenes 1a-d are effective dipolarophiles in 1,3-dipolar cycloadditions with nitrones and azomethine ylides, respectively, providing fluoroalkyl isoxazolidines 3-12 and pyrrolidines 13-14 in good to excellent yields, with nearly complete regiocontrol and total diastereocontrol in favor of the isomers having anti-configuration of the nitro- and fluoroalkyl-substituted carbon centers. The 3,4-cis-cycloadducts were generally produced in higher ratios. In the case of chiral nitrones, such as 2e, very high diastereocontrol in favor of the endo bicyclic cycloadduct 11 was observed. Interestingly, in most cases the chlorodifluoro nitroalkene 1b was found to afford the best diastereocontrol.     

Expeditious synthesis of bicyclic pyrrolidine/pyrrolizidine/thiazolidine grafted macrocycles through intramolecular 1,3-dipolar cycloaddition of azomethine ylides

Stereoselective synthesis of bicyclic pyrrolidine and pyrrolizidine grafted macrocycles has been accomplished through intramolecular 1,3-dipolar cycloaddition (1,3-DC) reaction. Alkenyl aldehydes 4a–b derived from salicylaldehyde have been reacted with secondary aminoacids to generate azomethine ylides which in turn were trapped intramolecularly by suitably placed dipolarophiles to give the corresponding macrocycle in moderate yield. The structures were assigned by 2D NMR spectra and the regio- and stereochemical outcome of the cycloadducts was established by a single crystal X-ray analysis of one of the products.     

Synthesis of polycyclic indolizine derivatives via one-pot tandem reactions of N-ylides with dichloro substituted α,β-unsaturated carbonyl compounds

Convenient and regioselective syntheses of 1,2-annulated, and 1,2-, 5,6- and 1,2-, 7,8-bisannulated polycyclic indolizine derivatives have been achieved by one-pot tandem reactions of cyclic N-ylides derived from the corresponding N-substituted pyridinium, quinolinium, and isoquinolinium salts 1-3 with dichloro substituted α,β-unsaturated carbonyl compounds 4-7. The reactions of the N-ylides with 2,3-dichloroindenone 4, 3,4-dichlorocoumarin 5, and 4a,6,7,8a-tetrachloro-1,4-methanonaphthalene-5,8-dione 6 proceed by sequential [3+2] cycloaddition and elimination of hydrogen chlorides from the cycloadducts. On the other hand, reactions of the N-ylides with 2,3-dichloro-1,4-naphthoquinone 7 take place via a novel reaction sequence to give the products 15-17.     

Rhodium(III) and palladium(II) complexes of some P-heterocycles; synthesis and X-ray structures

Deoxygenation of the syn-3-phosphabicyclo[3.1.0]hexane 3-oxides bearing a 3-phenyl or a 3-(4-methylphenyl) substituent (1a,b) by trichlorosilane took place already at mild condition and resulted in the corresponding phosphines (2a,b) with retention of configuration at phosphorus, while in the case of 3-(2-methylphenyl)-3-phosphabicyclo[3.1.0]hexane (2c), the inversion of the phosphorus atom was observed in solution under ambient conditions that was evaluated by quantum chemical calculations. A further phosphine ligand (5) was obtained by the reduction of 4-dichloromethylene-1,4-dihydrophosphinine oxide (4). The phosphine ligands (2 and 5) were used in the preparation of Rh(III) complexes (3 and 6). A Pd(II) complex of type PdCl₂(5)₂ (7) was also prepared. The stereostructures of a series of Rh(III) complexes of 3-aryl-3-phosphabicyclo[3.1.0]hexanes (3b-syn, 3c-syn and 3c-anti) were elucidated by single crystal X-ray analysis confirming the relative position of the dichlorocyclopropane and the P-substituent.     

One pot synthesis of fused [1,2-a]pyrrole from 1,6-dioxo-2,4-diene and haloalkyl primary amine

The one pot synthesis of fused 2,3-dihydropyrrolizine 4a and 6,7-dihydro-5H-indolizine 4b involving the intermolecular dehydrative condensation of 1-phenyl-1,6-dioxo-hepta-2,4-diene 1 with 2-chloroethylamine and 3-chloropropylamine followed by the intramolecular cyclization of the intermediary products 2-(1-chloroalkyl-5-methylpyrrol-2-yl)-1-phenylethanones 3a,b in the presence of a base such as Na₂CO₃ and NaHCO₃ is described. These also led to the concurrent formation of the oxidatively dimerized product 2,3-bis-[1,5-(2-chloroalkyl)-1-H-pyrrol-2-yl]-1,4-diphenylbutane-1,4-dione 5a,b whereby the structure was further confirmed by X-ray analysis.     

Cycloadditions of α-(4-[2.2]paracyclophanyl)-N-methyl nitrone

Cycloadditions of the newly synthesized α-(4-[2.2]paracyclophanyl)-N-methyl nitrone (9) with selected dipolarophiles such as phenyl isocyanate (10), styrene (13), dimethyl acetylenedicarboxylate (15) and methylene sulfene (17) are reported. Two isolated diastereomeric oxadiazolones 11 and 12 are obtained by the reaction of 9 with 10, whereas the reaction of 9 with either 13 and/or 15 gives only one diastereomer isoxazole 14 and/or 16. 4-([2.2]Paracylophanyl)-N-methylamine (20) was obtained by the reaction of 9 with 17. The structure of compounds 9, 11 and 14 are assigned by X-ray structural analysis.