Kinetics and mechanism of the liquid-phase oxidation of tert-butyl phenylacetate

The oxidation of tert-butyl phenylacetate in ortho-dichlorobenzene at 140°C occurs with short chains. The primary nonperoxide reaction products (tert-butyl α-hydroxyphenylacetate, tert-butyl α-oxophenylacetate, and benzaldehyde) are formed by the decomposition of a hydroperoxide (tert-butyl α-hydroperoxyphenylacetate) and (or) by the recombination of peroxy radicals with and without chain termination. Benzaldehyde and tert-butyl α-hydroxyphenylacetate undergo radical chain oxidation in a reaction medium to result in benzoic acid and tert-butyl α-oxophenylacetate. Homolytic hydroperoxide decomposition is responsible for process autoacceleration and results in benzaldehyde, which is also formed from hydroperoxide by a nonradical mechanism, probably, via a dioxetane intermediate. Both of the reactions are catalyzed by benzoic acid. Benzoic acid has no effect on hydroperoxide conversion into tert-butyl α-oxophenylacetate, which most likely occurs as a result of hydroperoxide decomposition induced by peroxy radicals. The rate constants of the main steps of the process and kinetic parameters have been calculated by solving an inverse kinetic problem.     

Selected Species of the Cucurbitaceae Family Used in Mexico for the Treatment of Diabetes Mellitus

In Mexico, Diabetes mellitus (DM) is a serious health problem, and although the current pharmacological treatments for DM such as insulin and oral hypoglycemics are available, the Mexican population continues to use medicinal plants in the treatment of DM. The antidiabetic properties of the plant species that belong to the Cucurbitaceae family has already been recognized worldwide. Since Mexico is one of the most important centers of diversity of Cucurbitaceae, the present work contributes to the review of the most used species of Cucurbitaceae in the treatment of DM in Mexico. The reviewed species (Cucurbita ficifolia, C. maxima, C. moschata, C. pepo, Ibervillea sonorae, Sechium edule, Citrullus lanatus, Cucumis melo, and C. sativus) revealed that the antidiabetic effects exerted are effective in a number of mechanisms involved in the complex pathogenesis of DM: hypoglycemic, antioxidant, anti-inflammatory, anti-obesity, protective effects on diverse organs and cells, as well as in the control of dyslipidemias; furthermore, the select species of the Cucurbitaceae family could also be essential components of diets for the control of DM in patients with the disease. Thus, the Cucurbitaceae species selected in the present work represent a source of antidiabetic agents that perhaps establish the bases for novel clinical treatments.     

Disordered modifications of cobalt molybdate

The structures of recently discovered new high-temperature modifications of cobalt molybdate, a′-and a″-CoMoO₄, were determined. a′-and a″-CoMoO₄ appear after the phase a-CoMoO₄ is heated above the temperature range 700–1000°C. They seem to be the disordered modifications of a-CoMoO₄ with metal atoms distributed at random in an a-CoMoO₄ oxygen network.The F(hkl) values, calculated for variously disordered a-CoMoO₄ structure, were compared with the observed intensities of diffraction lines changing in the course of a → a′ and a → a″ transitions. It was concluded that a″-CoMoO₄₄ has a completely disordered structure with random distribution of both Co and Mo atoms in oxygen interatomic voids. The a′-CoMoO₄ is a partly disordered modification, with random distribution of some cations only.The temperature and the kind of order-disorder transition depend on the method of preparation of a-CoMoO₄ samples.The disordered modifications of cobalt molybdate may be supercooled—even to room temperature—before it transforms rapidly into low-temperature b-CoMoO₄ form.     

Investigation of modification of hydrogenation and structural properties of LaNi5 intermetallic compound induced by substitution of Ni by Pd

The hydrogenation properties of the LaNi₅ (CaCu₅ type, hP6, P6/mmm) and Pd substituted derivatives LaNi_5−xPd_x compounds have been studied in the whole homogeneity range of the solid solution (0.25≤x≤1.5). The pressure versus hydrogen content isotherms show several plateaus and an increase of the plateau pressure as a function of palladium concentration. The volume increase of the Pd substituted alloys should have resulted in a lowering, and not an increase, of the plateau pressure, according to the conventional models based on the size effect. In order to elucidate the origin of this anomalous behavior, both an experimental and a theoretical ab initio electronic structure investigation have been carried out. Experimentally, the nature and the structural properties of the hydrides have been studied by both in situ and ex situ neutron diffraction. The crystal structures of the three hydride phases are reported (LaNi_3.5Pd_1.5D_1.96, filled-up CaCu₅ type, P6/mmm; LaNi₄PdD_2.72, LaNi₂(Ni_0.75Pt_0.25)₃H_2.61 type, oI128, Ibam; LaNi_4.75Pd_0.25D_5.67, partly ordered CaCu₅ type, P6mm). In addition, the phase diagram of LaNi_5−xPd_x-H system has been investigated. The electronic and thermodynamic properties of both intermetallic compounds and the hydrides have been studied by ab initio electronic structure calculations. The theoretical results are in good agreement with our experimental data, and show that electronic interactions play a major role in the hydrogenation behavior of these Pd substituted intermetallic compounds, and that these effects cannot be accounted for by a simplistic model based on the size effect alone.     

Role of self-assembled surfactant structure on the spreading of oil on flat solid surfaces

Uniform spreading of oil on solid surfaces is important in many processes where proper lubrication is required and this can be controlled using surfactants. The role of oil–solid interfacial self-assembled surfactant structure (SASS) in oil spreading is examined in this study for the case of hexadecane-surfactant droplet spreading on a flat horizontal copper surface, with triphenyl phosphorothionate surfactants having varying chain lengths (0 to 9). It is shown that the frictional forces (F_SASS) as determined by the SASS regulate droplet spreading rate according to surfactant chain length; surfactants with longer chains led to higher reduction in the spreading rate. The extent of such forces, F_SASS, depends on the surfactant density of the evolving SASS, and specific configuration the evolving SASS exhibit as per the orientations of the surfactant chains therein. Thus, F_SASS = [k₁ + k_2(t)] Γ_δ(t), where Γ_δ(t) is the surfactant adsorption density of SASS at time ‘t’ during evolution, and, k₁ and k_2(t) are the force coefficients for Γ_δ(t) and orientations (as a function of spreading time) of the surfactant chains respectively. As a SASS evolves/grows along with adsorption of surfactants at the spreading induced fresh interface, the k₁Γ_δ(t) component of F_SASS increases and contributes to reduction in the net spreading force (S). With a decrease in the net spreading force, the existence of a cross-over period, during which the transition of the spatial dynamics of the chains from disordered to realignment/packing induced ordered orientation occurs, has been inferred from the F_SASS vs. chain length relationships. Such relationships also suggested that the rate of realignment/packing is increased progressively particularly due the realignment/packing induced decrease in the net spreading force. Therefore, the realignment process is a self-induced process, which spans a measurable period of time (several minutes), the cross-over period, during which the net spreading force decreases essentially due to such self-induced process.     

Linear expansion of the eigenvalues of a Hermitian matrix and its application to the analysis of the electronic spectra of 3d ions in crystals

It is shown that the eigenvalues E_i of a Hermitian matrix H with matrix elements H_ij = Σ_kA^k_ija_k, where A^k_ij are known numbers and a_k a set of parameters, can be exactly expanded as $\text{E}{}_{\mathrm{i}}\text{= Σ}{}_{\mathrm{k}}\text{(}\text{?E}{}_{\mathrm{i}}\text{?a}{}_{\mathrm{k}}\text{)a}{}_{\mathrm{k}}$. This property is applied to the analysis of the optical spectra of transition metal ions in crystals proposed by L. Pueyo, M. Bermejo, and J. W. Richardson (J. Solid State Chem.31, 217, 1980), and it is shown that this method represents the best fit of the Hamiltonian eigenvalues to the observed (or calculated) spectrum. Further advantages of using this property, in connection with the spectral analysis, are the minimization of the errors associated with the numerical approximations and a reduction in computer time. In the molecular orbital calculation of the optical or uv spectra of these systems, this linear expansion of the eigenvalues give a detailed interpretation of the improvements produced by refined calculations, such as those including configuration interaction. In particular, the changes in one-electron energy and in open-shell repulsion interactions associated with the refinement can be clearly and easily formulated. As examples, the computed spectra of CrF^4?₆ and CrF^3?₆ are discussed.     

An equation of state for gases and liquids

We present an equation of state that can represent within experimental error most individual sets of published PVT data for most fluids, whether in the range of vapor at moderate pressures, or compressed liquids, or gases at very high temperatures and densities, any region in fact except the vicinity of the critical point. In terms of pressure the equation is P = DRT [1 + (D/T) (c₁T + c₂D - 1) / (c₃ + c₄T^{$\text{sol1}\text{2}$} + c₅D + c₆D²)] where D = 1/V, the density in mole 1^?1. The coefficients are readily determined by a least squares fit of the data. An additional term is sometimes needed if the D range is very wide, say several times D_c. Different fluids can be simultaneously represented over a limited range, such as the compressed liquid region, by a single reduced form of the equation in which all but three of the constants are the same for all, and these three (a reducing T, 1/c₁, a reducing D, 1 / c₂, and a dimensionless parameter) are characteristic of each individual fluid. The equation can also simultaneously represent many data sets for a single fluid from many labs and covering various T and D ranges. From this, a consistent representation of its thermodynamic properties can be derived.     

Enthalpy characteristics of solution of L-cysteine and L-asparagine in water-alcohol mixtures at 298.15 K

The integral enthalpies of solution Δ_sol H ^m of L-cysteine and L-asparagine in mixtures of water with ethanol, n-propanol, and isopropanol at a mole fraction of alcohol of up to 0.32 were determined by calorimetry of solution. The standard enthalpies of solution (Δ_sol H ⁰) of L-serine and of its transfer (Δ_tr H ⁰) from water to a mixed solvent were calculated. The dependences of Δ_sol H ⁰ and Δ_tr H ⁰ on the composition of water-alcohol mixtures pass through a maximum. The calculated enthalpy coefficients of pair interaction of amino acids with alcohol molecules are positive and increase in the order ethanol, n-propanol, isopropanol. The data obtained were interpreted from the viewpoint of various types of interaction in solution and effect of the amino acid residue on the thermochemical characteristics of solution.     

Effect of Soil Type: Qualitative and Quantitative Analysis of Phytochemicals in Some Browse Species Leaves Found in Savannah Biome of South Africa

In semi-arid regions, browse plant species are used as feed and for medicinal purposes for both animals and humans. The limitation of the utilization of these species to medicinal purposes or as feed for livestock is a lack of knowledge on the concentration level of phytochemicals and other bioactive compounds found in these plants. The study sought to assay the qualitative and quantitative bioactive constituents of some browse species found in the savannah biome of South Africa, viz. Adansonia digitate, Androstachys johnsonii, Balanites maughamii, Berchemia discolor, Berchemia zeyheri, Bridelia mollis hutch, Carissa edulis, Catha edulis, Colophospermum mopane, Combretum Imberbe, Combretum molle, Combretum collinum, Dalbergia melanoxylon, Dichrostachys cinerea, Diospros lycioides, Diospyros mespiliformis, Euclea divinorum, Flueggea virosa, Grewia flava, Grewia flavescens, Grewia monticola, Grewia occidentalis, Melia azedarach, Peltophorum africanum, Prosopis velutina, Pseudolachnostylis maprouneifolia, Pterocarpus rotundifolius, Schinus molle, Schotia brachypetala, Sclerocarya birrea, Searsia lancea, Searsia leptodictya, Searsia pyroides, Senegalia caffra, Senegalia galpinii, Senegalia mellifera, Senegalia nigrescens, Senegalia polyacantha, Strychnos madagascariensis, Terminalia sericea, Trichilia emetic, Vachellia erioloba, Vachellia hebeclada, Vachellia karroo, Vachellia nilotica, Vachellia nilotica subsp. Kraussiana, Vachellia rechmanniana, Vachellia robusta, Vachellia tortilis, Vachellia tortilis subsp. raddiana, Vangueria infausta, and Ziziphus mucronata. These browse species’ leaf samples were harvested from two provinces (Limpopo and North-West) of South Africa. The Limpopo province soil type was Glenrosa, Mispah, and Lithosols (GM-L), and the soil types in the North-West Province were Aeolian Kalahari Sand, Clovelly, and Hutton (AKS-CH). The harvested browse samples were air dried at room temperature for about seven days and ground for analysis. The methanol and distilled water extracts of the browse species leaves showed the presence of common phytoconstituents, including saponins, flavonoids, tannins, phenols, cardio glycosides, terpenoids, and phlobatannins, as major active compounds in browse species leaves. In the quantitative analysis, phytochemical compounds, such as soluble phenols, insoluble tannins, and condensed tannins, were quantified for common species found in both sites. Two-way ANOVA and multivariate analysis were used to test soil type and species effect on soluble phenols, insoluble tannins, and condensed tannins of woody species. Dichrostachys cinerea (0.1011% DM) in GM-L soil type and Z. mucronata (0.1009% DM) in AKS-CH soil type showed the highest (p < 0.05) concentration of soluble phenols. In AKS-CH soil type, D. cinerea (0.0453% DM) had the highest insoluble tannins concentration, while V. hebeclada had the lowest (0.0064% DM) insoluble tannins content. Vacchelia hebeclada had lower (p < 0.05) condensed tannins concentration levels than all other browse plants in both soil types. Under multivariate analysis tests, there was a significant effect (p < 0.001) of soil type, species, and soil type x species interaction on soluble phenols, insoluble tannins, and condensed tannins of woody species. In this study, most of the woody species found in GM-L soil type showed a lower amount of tannins than those harvested in AKS-CH soil type. There is a need to identify the amount of unquantified phytochemicals contained in these browse species and valorize the high-bioactive-compound browse species to enhance and maximize browsing of these browse species for animal production.     

Synthesis and conformational analysis of glycomimetic analogs of thiochitobiose

The synthesis of six analogs of N,N′-diacetylchitobiose is reported, including a novel transglycosylation reaction for the preparation of S-aryl thioglycosides. The conformations of the compounds were studied by a combination of NMR spectroscopy and molecular modeling, using force field calculations. In the case of the S-aryl thioglycosides with exclusively S-glycosidic linkages, dihedral angles of the disaccharidic S-glycosidic bonds, Φ′ and Ψ′ and of the S-arylglycoside bonds, Φ and Ψ, were found to be similar, whereas they were different in mixed glycosides and in a thiazoline derivative. An adequate correlation between the calculated H,H-distances of the local minima and the measured NOE contacts was achieved by applying population-weighted averages over participating conformers based on weighted relative energies.     

Fatigue behavior of polystyrene (PS) analyzed from the Fourier transform (FT) of stress response: First evidence of I2/1(N) and I3/1(N) as new fingerprints

The fatigue behavior of polystyrene (PS) in strain controlled torsion rectangular oscillatory tests was analyzed via Fourier transform (FT) to better understand the time evolution of linear and nonlinear mechanical parameters, and to establish fingerprints related to failure onset. The tests were performed under large amplitude oscillatory shear (LAOS), so the stress response was no longer perfectly sinusoidal and higher harmonics could be detected and quantified in the FT spectra as a function of time or number of cycles N. A linear parameter, the storage modulus (G′(N)), was analyzed, as well as nonlinear parameters of the ratios of the second (I₂(N)) and the third (I₃(N)) harmonics over the fundamental one (I₁(N)). The nonlinear parameter I_2/1(N) is very low for undamaged samples, but its intensity was found to increase when defects were created in the structure to a point where cracks became visible in the sample. On the other hand, the I_3/1(N) parameter increased steadily during a test up to a local maximum where a macroscopic crack occurs in the sample. Both parameters I_2/1(N) and I_3/1(N) are proposed as new criteria to detect the onset of part failure under the conditions tested and can be used as safety limits for partial damage.     

Engineering of Yeast Old Yellow Enzyme OYE3 Enables Its Capability Discriminating of (E)-Citral and (Z)-Citral

The importance of yeast old yellow enzymes is increasingly recognized for direct asymmetric reduction of (E/Z)-citral to (R)-citronellal. As one of the most performing old yellow enzymes, the enzyme OYE3 from Saccharomyces cerevisiae S288C exhibited complementary enantioselectivity for the reduction of (E)-citral and (Z)-citral, resulting in lower e.e. value of (R)-citronellal in the reduction of (E/Z)-citral. To develop a novel approach for the direct synthesis of enantio-pure (R)-citronellal from the reduction of (E/Z)-citral, the enzyme OYE3 was firstly modified by semi-rational design to improve its (R)-enantioselectivity. The OYE3 variants W116A and S296F showed strict (R)-enantioselectivity in the reduction of (E)-citral, and significantly reversed the (S)-enantioselectivity in the reduction of (Z)-citral. Next, the double substitution of OYE3 led to the unique variant S296F/W116G, which exhibited strict (R)-enantioselectivity in the reduction of (E)-citral and (E/Z)-citral, but was not active on (Z)-citral. Relying on its capability discriminating (E)-citral and (Z)-citral, a new cascade reaction catalyzed by the OYE3 variant S296F/W116G and glucose dehydrogenase was developed, providing the enantio-pure (R)-citronellal and the retained (Z)-citral after complete reduction of (E)-citral.     

Effect of ring coordination of pyridine-3,5-dicarboxylate and metatungstate to Ln ions on metatungstate structure: Synthesis, structure and optical property of four new compounds

Four novel compounds based on α-metatungstate [H₂W₁₂O₄₀]⁶⁻ (W₁₂) and Ln-organic complexes, (NH₄)₄[Ln₂(L)₂(H₂O)₉(H₂W₁₂O₄₀)]·nH₂O (Ln=Eu^III (1), Gd^III (2), Dy^III (4), n=11; Tb^III (3), n=12; L=pyridine-3,5-dicarboxylate dianion) have been synthesized in aqueous solution and characterized by element analysis, IR spectrometry and thermogravimetric analysis. Single-crystal X-ray diffraction analyses reveal these compounds are isostructural with a P21/n space group. The W₁₂ cluster acting as a tridentate ligand connects three Ln³⁺ ions, in turn, each Ln2 ion links two W₁₂ clusters, as a result, a W₁₂-Ln polymeric chain is formed. Coordination of pyridine-3,5-dicarboxylate ligands to the Ln³⁺ ions leads to a Ln-L polymeric chain. The two chains, W₁₂-Ln and Ln-L, share Ln2 ions, resulting in a 2-D layer. Ring coordination of pyridine-3,5-dicarboxylate and W₁₂ to the Ln ions changes some bond angles of W₁₂ that leads to a slight distortion of W₁₂ and splitting of vibration band of W-Oc-W. Solid-state photoluminescence properties of compounds 1−4 have been investigated.     

Vibrational spectra and vibrational states of simple gas-phase hydrogen-bonded dimers

The article aims to outline the growth of evidence and ideas about infrared band broadening for simple, gaseous, moderately strong, hydrogen bonded dimers B…HA, to draw attention to areas in need of further development and to collect together experimental information available at the present time about vibrational states associated with such dimers. The band associated with the modified HA stretching mode, ν_s, is observed for several dimers not only to be broad, but to have sub-band structure, which is satisfactorily interpreted as arising from combination bands of ν_s with the low frequency stretch-mode ν_σ, giving a progression ν_s ± nν_σ as a result of strong anharmonic coupling. For weaker dimers with lower values of ν_σ the sub-band structure is less evident, and may appear only as shoulders, while for still weaker dimers, the sub-bands may be merged into a featureless broad band. A major factor contributing to the breadth of the individual sub-bands in the band structure is the presence of hot-bands, especially a long series based on successive excited states of the low-frequency bending mode ν_β. A link is indicated with the interpretation of band-broadening for moderately strong hydrogen-bonded complexes in the liquid state. The anharmonic coupling of ν_s and ν_σ is again a central feature but there is a new factor, namely the coupling of ν_σ through a fluctuating potential with the surroundings, which has the result that the ν_s mode rapidly loses phase coherence resulting in a broad structureless band.     

LCST behavior of copolymers of N-isopropylacrylamide and N-isopropylmethacrylamide in water

The lower critical solution temperature (LCST) behavior of copolymers of N-isopropylacrylamide (NiPA) and N-isopropylmethacrylamide (NiPMA) in water was studied as a function of the copolymer composition, using a combination of turbidity measurements and differential scanning calorimetry (DSC). The copolymers were prepared by free radical polymerization using N,N-dimethylformamide as a solvent and α,α′-azobis(isobutyronitrile) as an initiator. The copolymer composition was determined by elemental analysis. It was found that the temperature (T _c) at which the copolymer undergoes a phase transition, i.e., LCST, increases linearly with increasing the mole fraction (f _m) of NiPMA in the copolymer, within the T _c range from 32?°C (at f _m?=?0; NiPA homopolymer) to 42?°C (at f _m?=?1; NiPMA homopolymer). Also found from heating DSC thermograms were the linear dependencies of the enthalpy (ΔH) and entropy (ΔS) changes at T _c upon f _m. However, the ΔH (5.5?kJ/unit-mol) at f _m?=?1 was slightly smaller than that (5.7?kJ/unit-mol) of poly(N-n-propylacrylamide) but considerably smaller than that (7.8?kJ/unit-mol) of poly(N-n-propylmethacrylamide). The same trend was observed in the f _m dependence of ΔS. These results were discussed in terms of the structural effects of the NiPMA monomer unit on the heat-induced phase transition in water of poly(NiPA-co-NiPMA)s. It was suggested that a strong interaction of water with the amide group in the NiPMA would raise the transition temperature, but a local dehydration which occurs around the isopropyl side chain would not lead to large changes in the enthalpy and entropy at T _c.     

Fine tuning of the structure of phosphine–phosphoramidites: application for rhodium-catalyzed asymmetric hydrogenations

Diastereomers of (4-(diphenylphosphino)pentan-2-yl)-N-isopropyl-{dinaphtho[2,1-d:1′,2′-f][1,3,2]dioxa-phosphepin-2-yl}-4-amine, (S)-(2S,4S)-1, and (S)-(2R,4R)-3; the octahydro derivative 4 of (S)-(2S,4S)-1, and derivative 2 of (S)-(2S,4S)-1 containing a 1,3-propanediyl backbone, have been synthesized and used for rhodium-catalyzed asymmetric hydrogenations of prochiral olefins in order to study the role of the stereogenic elements in the backbone and in the terminal moiety. The central chirality in the bridge has been found to determine the configuration of the product with a cooperative effect from the terminal groups. Excellent ee’s (up to 99.9%) were obtained in the hydrogenation of methyl (Z)-α-acetamidocinnamate using a rhodium complex with the matched arrangement (S)-(2S,4S)-1. The hydrogenation is accomplished in a highly enantioselective manner by using green solvents such as propylene carbonate.     

Preparation and Crystal Structures of 4-(4′-Pyridylthio)-1-methylpyridinium Salts: Assembly of a Donor-Acceptor-Type Molecule Containing a Sulfide Bridge

A series of ionic 4-(4′-pyridylthio)-1-methylpyridinium salts with different counteranions (1, I⁻; 2, BF⁻₄; 3, PF⁻₆; and 4, OTf⁻, where OTf=trifluoromethanesulfonate) have been prepared. Structural analysis reveals that the cation exhibits a variety of stacking structures dependent on the anion. Compound 1 crystallizes in space group P2_1/n (#14), with a=10.764(3) Å, b=9.601(5) Å, c=13.105(3) Å, β=108.35(2), V=1285.4(8) ų, and Z=4. In this compound, each cation moiety is stacked in a helical arrangement along the c-axis. Compound 2, which is isomorphous to 1, has space group P2_1/n (#14), with a=11.647(2) Å, b=9.203(3) Å, c=13.232(2) Å, β=108.42(2), V=1345.6(5) ų, and Z=4. Compound 3 crystallizes in space group P2_1/n (#14), with a=8.06(1) Å, b=17.43(1) Å, c=10.30(1) Å, β=103.0(1), V=1410(3) ų, and Z=4. In this salt, the cation molecules assume a head-to-tail stacking arrangement, forming a polar pseudo 1-D chain. Compound 4 crystallizes in space group Pb? (#2), with a=7.585(4) Å, b=15.443(7) Å, c=6.775(4) Å, α=99.33(4), β=108.35(2)^o, γ=98.37(4), V=756.6(7) ų, and Z=2. The structure of 4 consists of a columnar stacking of pyridine moieties, with the cation moieties surrounded by the counteranions. Calculations show that the 4-(4′-pyridylthio)-1-methylpyridinium cation may be a good building block for second harmonic generation (SHG) materials, even though salts 1-4 crystallized in centrosymmetric structures and were SHG inactive.     

Calculation of the electronic properties of neutral and ionized divalent-metal clusters

The electronic properties of neutral and ionized divalent-metal clusters have been studied using a microscopic theory, which takes into account the interplay between van der Waals (vdW) and covalent bonding in the neutral clusters, and the competition between hole delocalization and polarization energy in the ionized clusters. By calculating the ground-state energies of neutral and ionized Hg _n clusters, we determine the size dependence of the bond character and the ionization potentialI _p (n). For neutral Hg _n clusters we obtain a transition from van der Waals to covalent behaviour at the critical sizen _c ～10–20 atoms. Results forI _p (Hg _n ) withn≤20 are in good agreement with experiments, and suggest that small Hg _n ⁺ clusters can be viewed as consisting of a positive trimer core Hg ₃ ⁺ surrounded byn?3 polarized neutral atoms.     

Theoretical and experimental analysis of the fine structure and hyperfine structure in the configurations 5p6s and 5p6p of the antimony II spectrum

From 17 transitions in the singly ionized Sb II spectrum the hyperfine structure (A andB splitting constants) of the complete excited configurations 5p6s and 5p6p were determined by means of optical interference spectroscopy. In addition, a theoretical analysis both of the fine structure and also of the hyperfine structure was carried out (in the case of 5p6p of the general typenpn′p for the first time in literature). For the 3 levels 5p6p ³ P ₁, 5p7p ³ D ₂ and 5p6p ¹ P ₁ a different classification was found and consistent values for the fine structure parameters, mixing coefficients and single electron hyperfine structure splitting parametersa _nl ^ik andb _nl ^ik were obtained. The three new determinations in Sb II of the quadrupole moment (in barn) of¹²¹Sb (Q(5p6s)=?0.55(5);Q(5p6p)=?0.57(5) from the 5p-electron andQ(5p6p)=?0.7(2) from the 6p-electron) are well agreeing with each other but differ to former values from SbI. The core polarization and isotope shift of the lines, however, are compatible with our former results in SbI.