In situ synthesis of copper nanoparticles and poly(o-toluidine): A metal-polymer composite material

We report here a novel in situ synthetic method for the preparation of poly(o-toluidine) and copper nanoparticle composite material. In this experiment, o-toluidine and cupric sulfate were used as the precursor; during the reaction o-toluidine was oxidized and forms poly(o-toluidine), while on the other hand cupric sulfate gets reduced and forms copper nanoparticle. IR, UV-vis and Raman spectra provide the information on the structure of the polymer. The TEM and SEM show the size of the nanoparticles and the morphology of the polymer, respectively.     

EPR study of mono-o-iminobenzosemiquinonato nickel(II) complexes with Ni-C σ-bond

New square-planar (Ph₃P)Ni^II(o-Tol)(ISQ-Prⁱ) (1), (Ph₃P)Ni^II(o-Tol)(ISQ-Me) (2), (Ph₃P)Ni^II(o-Tol)(ISQ-Bu^t) (3) nickel complexes (where ISQ-Prⁱ = 4,6-di-tert-butyl-N-(2,6-di-iso-propylphenyl)-o-iminobenzosemiquinonate, ISQ-Me = 4,6-di-tert-butyl-N-(2,6-di-methylphenyl)-o-iminobenzosemiquinonate, ISQ-Bu^t = 4,6-di-tert-butyl-N-(2,5-di-tert-butylphenyl)-o-iminobenzosemiquinonate, o-Tol = o-tolyl ligand) have been synthesized. Complexes contain σ-bound o-tolyl and neutral donor ligand Ph₃P. The sterical hindrances of N-aryl in o-iminobenzosemiquinonate ligands lead to the tetrahedral distortion of square-planar configurations of complexes as it was established using EPR spectroscopy.     

Improved Hiyama cross-coupling reactions using HOMSi® reagents: a novel application of a palladacycle

Various parameters in the Hiyama cross-coupling reaction of HOMSi® reagents with ethyl bromobenzoate were studied. These included solvent, ligand, palladium source, and added water. DMF and THF were found to be excellent solvents. Palladium chloride was found to be the best palladium source and no added water was required. The use of tri-o-tolylphosphine as the ligand proved to be particularly effective.     

AuBr3-catalyzed cyclization of o-(alkynyl)nitrobenzenes. Efficient synthesis of isatogens and anthranils

The cyclization of o-(arylalkynyl)nitrobenzenes was catalyzed by AuBr₃ to produce the corresponding isatogens in good to high yields together with small amounts of anthranils. On the other hand, anthranils were obtained selectively when the AuBr₃-catalyzed reaction was carried out using o-(alkylalkynyl)nitrobenzenes.     

Reactions of Ru(Cp) complexes with P(o-tolyl)3

Reaction of [Ru(Cp^∗)(CH₃CN)₃](PF₆) with P(o-tolyl)₃ affords [Ru(Cp^∗){(η⁶-o-tolyl)P(o-tolyl)₂}](PF₆) (4) in which the P-atom is not coordinated to the metal. The solid-state structure of 4 has been determined. A related reaction with P(p-tolyl)₃ reveals a small quantity [Ru(Cp^∗){(η⁶-p-tolyl)P(o-tolyl)₂}](PF₆), in solution, but mostly the expected bis-phosphine complex. Reaction of the Ru(IV) dication, [Ru(Cp^∗)(η³-PhCHCHCH₂)(DMF)₂](PF₆)₂, with P(o-tolyl)₃ gives a mixture of the phosphonium salt, C₆H₅CHCHCH₂P(o-tolyl)₃ (9) and the dication [Ru(Cp^∗) (η⁶-C₆H₅CHCHCH₂P(o-tolyl)₃)](PF₆)₂ (10). Salt 9 forms via attack of the P-atom on the allyl ligand. The latter product results from complexation of 9 via the phenyl group of the former allyl ligand. It would seem that the sterically demanding P(o-tolyl)₃ ligand is not readily compatible with the Ru(Cp^∗) fragment, in either the +2 or +4 oxidation state. Detailed NMR studies are reported.     

Synthesis of ortho-phenyl substituted MeO-BIPHEP ligand and its application in Rh-catalyzed asymmetric hydrogenation

A new BIPHEP-type ligand with phenyl groups at the 3,3′-positions, o-Ph-MeO-BIPHEP 3 was prepared. This ligand afforded excellent enantioselectivities when used in the Rh-catalyzed asymmetric hydrogenation of α-dehydroamino acid derivatives. The strong influence of o-phenyl groups of the ligand on the enantioselectivities of the reaction has been demonstrated by a comparison with its parent ligand MeO-BIPHEP.     

NMR study of 1-aryl-1,2-dicarba-closo-dodecaboranes: intramolecular C-H?O hydrogen bonding in solution

Dicarba-closo-dodecaborane(12) (carborane) has recently received much attention as a building block for supramolecular assemblies and bioactive compounds. Among carborane isomers, 1,2-dicarba-closo-dodecaborane(12) (o-carborane) has unique chemical properties, including the ability of the o-carborane C-H hydrogens to form hydrogen bonds. To evaluate intramolecular hydrogen bond formation between the o-carborane C-H hydrogen and various hydrogen bond acceptors in solution, we have designed and synthesized 1-aryl-o-carboranes 2. Intramolecular hydrogen bonding ability was evaluated by means of ¹H NMR measurement of the o-carborane C-H hydrogen signal of 2. The 1-(2-methoxyphenyl)-o-carborane derivative 2m appeared to form an intramolecular hydrogen bond between o-carborane C-H hydrogen and the oxygen atom acting as a hydrogen bonding acceptor. In this study, we present evidence for hydrogen bond formation in solution between the o-carborane C-H and hydrogen bond acceptors positioned with appropriate geometry.     

Photoacid generators (PAGs) based on N-acyl-N-phenylhydroxylamines for carboxylic and sulfonic acids

Simple and efficient photoacid generators (PAGs) for carboxylic and sulfonic acids based on N-acyl-N-phenylhydroxylamines have been demonstrated. Irradiation of o-carboxylates and thermally rearranged o-arenesulfonates of N-acyl-N-phenylhydroxylamines using UV light (≥254 nm) in aqueous methanolic solution resulted in efficient generation of carboxylic and sulfonic acids, respectively. The carboxylic acid generation ability of N-acyl-N-phenylhydroxylamines was found to be dependent on their N-acyl substituents. Further, polymer bearing o-arenesulfonates of N-acyl-N-phenylhydroxylamine was synthesized and demonstrated as PAG for sulfonic acids.     

Studies of reactions of o-xylylene-α,α′-dihalides with palladium complexes and the catalytic synthesis of 3-isochromanone

Homogeneous catalysis by palladium complexes with phosphorus(III) ligands of the carbonylation of o-xylylene dihalides in the presence of water to form 3-isochromanone has been studied. Triphenylphosphine was found to provide the most effective catalyst, and by-products and intermediates of systems containing this ligand have been investigated. 2-Indanone is one by-product but is unstable to decomposition under catalytic conditions. Excess PPh₃ is necessary to prolong activity of the catalyst but is also transformed to bis-phosphonium compound [o-C₆H₄(CH₂PPh₃)₂]X₂ (X = Cl or Br); this quaternization has been investigated and the structure of the bromide salt determined by X-ray diffraction. An unstable oxidative addition product of Pd(PPh₃)₄ was detected as a probable intermediate and related to the previously reported but catalytically-inactive complex trans-Pd(o-CH₂C₆H₄CH₂Cl)Cl(PMe₃)₂, which has been structurally characterized by X-ray diffraction in this work.     

Novel synthesis of o-naphthothiophenequinone derivatives via regioselective Diels-Alder reaction

A novel procedure to construct o-naphthothiophenequinones has been achieved from readily available o-benzothiophenquinones and N-dienes via Diels-Alder reaction-aromatization sequence as key steps. The absolute regioselectivity was established via Diels-Alder reaction of o-benzothiophenquinones with rich electron N-dienes.     

Asymmetric synthesis of 3-substituted 3,4-dihydroisocoumarins via stereoselective addition of laterally lithiated chiral 2-(o-tolyl)oxazolines to aldehydes followed by diastereomer-selective lactonization

Lateral lithiation of (S)-4-isopropyl-2-(o-tolyl)oxazoline in diethyl ether followed by the reaction with aldehydes in the presence of TMEDA produced the addition products with stereoselectivities up to 84% de. Utilization of TMEDA as a ligand is essential for the good selectivity. Rationale for the stereoselectivity is proposed based on ab initio calculation of the lateral lithio species. The major (S,S)-products lactonized faster than the minor (S,R)-products to the corresponding 3,4-dihydroisocoumarins under acidic conditions. Thus, (3S)-3,4-dihydroisocoumarins were obtained in good optical purities up to 97% ee by sequential application of these matched stereoselective reactions.     

Dehalogenation of o-dihalogen substituted arenes and α,α′-dihalogen substituted o-xylenes with lanthanum metal

It was found that lanthanum metal caused the dehalogenation of o-dihalogen substituted arenes and α,α′-dihalogen substituted o-xylenes to generate the corresponding benzynes and o-quinodimethanes. When o-dihalogen substituted arenes were allowed to react with lanthanum metal in the presence of dienes, the Diels-Alder products between benzyne and dienes were formed in moderate to good yields. Similarly, the Diels-Alder adducts of o-quinodimethane with dienophiles were obtained, in the reaction of α,α′-dibromo-o-xylenes with lanthanum metal in the presence of dienophiles.     

Interaction of 3,5-di-tert-butyl-o-benzoquinone with secondary amines—a pathway to new sterically hindered N,N-disubstituted o-aminophenols

The interaction of 3,5-di-tert-butyl-o-benzoquinone with secondary amines has been studied. The synthetic procedure was developed in order to synthesize a series of new N,N-disubstituted o-aminophenols. The interaction of 3,5-di-tert-butyl-o-benzoquinone with dimethylamine leads to 2-(N,N-dimethylamino)-4,6-di-tert-butyl-phenol, which is oxidized in the reaction medium by the parent 3,5-di-tert-butyl-o-benzoquinone forming spirocompound 4,5′,6,7′-tetra-tert-butyl-3′-methyl-3′H-spiro[1,3-benzodioxol-2,2′-[1,3]benzoxazole].     

A new method for the cleavage of nitrobenzyl amides and ethers

A mild and efficient o- and p-nitrobenzyl cleavage protocol was developed. o- and p-nitrobenzyl groups were easily removed from a variety of substrates using 20% aqueous NaOH in methanol at 75 °C, presumably via oxidation at the benzylic position by oxygen dissolved in the solution. These easily introducible and removable nitrobenzyl groups can serve as valuable protecting groups for the synthesis of multifunctional, complex molecules.     

Formation of 2,3-diaminophenazines and their self-assembly into nanobelts in aqueous medium

One-dimensional (1D) nanobelts of several hundred micrometers in length, several hundred nanometers in width and several hundred nanometers in height are obtained by direct mixing of ortho-phenylenediamine (oPD) and FeCl₃ aqueous solution at room temperature. The nanobelts were characterized by elemental analysis, liquid chromatography/mass spectrometry (LC/MS), NMR (¹H and ¹³C), FT-IR, UV-vis, thermogravimetric (TG) and conductivity measurement. The nanobelts are identified as 2,3-diaminophenazine assemblies. The formation of the nanobelts involves two stages: (1) oxidation of oPD by FeCl₃, yielding individual 2,3-diaminophenazine molecules; and (2) self-assembly of the 2,3-diaminophenazine, forming the 1D nanobelts. The nanobelts exhibit fairly high thermal stability and show conductivity at the level of semiconductors.     

Preparation, characterization and structure of ruthenium phosphine complexes containing non-innocent ligands

Phosphine ruthenate complexes containing the non-innocent ligands 4-chloro-1,2-phenylenediamine (opda-Cl) and 3,3′,4,4′-tetraamminebiphenyl (diopda) were synthesized and characterized by means of X-ray diffraction, electrochemistry, ³¹P{¹H} NMR and electronic spectroscopies. Crystals of cis-[RuCl₂(dppb)(bqdi-Cl)] complex were isolated as a mixture of two conformational isomers due to different positions of the chlorine atoms of the o-phenylene ligand in relation to the P1 atom of the phosphine moiety.     

Hetero-Diels-Alder reaction of photochemically generated α-hydroxy-o-quinodimethanes with trifluoromethyl ketones

Hetero-Diels-Alder reaction of α-hydroxy-o-quinodimethanes photochemically generated from o-tolualdehydes with trifluoromethyl ketones gave a mixture of hemiacetals and hydroxyaldehydes in fairly good yields. Their subsequent oxidation with PCC provided 1-isochromanones as formal oxidative [4+2] cycloaddition products. In contrast, similar reaction of aromatic ketones such as o-methylbenzophenone, 1-indanone, and α-tetralone gave exclusively the corresponding ketones having (trifluoromethyl)methylol groups at the o-position.     

Comparative studies of chemically synthesized polyaniline and poly(o-toluidine) doped with p-toluene sulphonic acid

Polyaniline and poly(o-toluidine) doped with p-toluene sulphonic acid (p-TSA) were synthesized by in situ chemical polymerization method using ammonium per sulphate as an oxidizing agent. This is a novel polymerization process for the direct synthesis of emeraldine salt phase of the polymer. The polymers were characterized by using UV-Vis and FT-IR spectroscopy, SEM, elemental analyzer, TGA/DSC and conductivity measurements. Thermal analysis shows that poly(o-toluidine) is less thermally stable compared to polyaniline. The less conductivity in poly(o-toluidine) is due to the cumulative steric as well as electronic effect of the bulky methyl substituent present on the benzene ring. High temperature conductivity measurements show ‘thermal activated behavior’.     

Synthesis of α,β-unsaturated dioxanes, dioxolanes and dioxepanes by trans-acetalisation of dimethylacetals with meso or C2-symmetrical 1,2-, 1,3- and 1,4-diols

Several o-dibenzylic diols were prepared reacting organometallics with o-phthalaldehyde at room temperature in ether. The identity of the meso and C₂-symmetrical (d,l) isomers as well as their ratio were determined by chiral gas chromatography. The meso and C₂ (racemic) stereoisomeric diols were easily separated by flash chromatography on silica gel. A set of 18 α,β-unsaturated acetals were then prepared reacting those, as well as commercially available 1,2, 1,3 and 1,4 diols, with the corresponding methylacetals in acidic medium. A trans-acetalisation procedure adapted to the cases of fragile allylic alcohols or unfavorable 1,6 diols-derived dioxonanes based on a Dean-Stark trapping of methanol was also employed.     

ESR investigation of copper(I) complexes with o-semiquinolate ligands

Solutions of o-semiquinolatecopper(I) complexes with neutral ligands, such as PPh₃, P(OEt)₃, AsPh₃, AsEt₃, cyclooctadiene-1,5, PhCCPh, PhCCH and CO, were investigated by ESR. The spectra of the complexes are characterised by high specificity and sensitivity to configuration of ligand surroundings. The radical character of the o-semiquinolate ligand remains constant over the chemical transformation in the metal coordination sphere. These properties allow the use of o-semiquinolate ligands as a special “spin mark” in the chemistry of coordination compounds.