Reactions of 4-(dimethylamino)pyridinium activated pentachloropyridine with nitrogen nucleophiles and hydride

Substitution reactions on 2′,3′,5′,6′-tetrachloro-4-dimethylamino-[1,4]bipyridinyl-1-ylium chloride with nitrogen nucleophiles such as n-propylamine, isopropylamine, glycine, morpholine, and piperidine were examined. Highly functionalized Cl²,Cl³,N⁴,Cl⁵,Cl⁶- and N²,Cl³,N⁴,Cl⁵,Cl⁶-substituted pyridines were obtained, in part possessing unsubstituted 4-amino groups due to dealkylation. Detailed NMR studies were performed in order to elucidate the regiochemistry of these dealkylations.     

Synthesis, characterization and X-ray structural determination of a stable dication derived from symmetrical ortho-aminophenyl diamine and 2-pyridinecarboxaldehyde

N,N′-Bis(2-aminophenyl)-1,2-ethanediamine is synthesized from 1,2-diaminoethane and 1-chloro-2-nitrobenzene in the presence of sodium carbonate and the product reduced by zinc dust and ammonium chloride. A novel stable dication is synthesized by reaction of N,N′-bis(2-aminophenyl)-1,2-ethanediamine and 2-pyridinecarboxaldehyde in the presence of manganese chloride in methanol. The X-ray structural analysis shows formation of the dication.     

Naphthalene-ring containing diamine and resulting thermally stable polyamides

A new naphthalene-ring containing diamine, bis-[4-(5-amino-naphthalene-1-yloxy)-phenyl]-methanone was prepared from reaction of 5-amino-1-naphthol with 4,4′-dichlorobenzophenone in the presence of K₂CO₃. A series of novel polyamides were prepared by direct polycondensation of the diamine with various commercially available diacid chlorides including terephthaloyl chloride, isophthaloyl chloride, adipoyl chloride, and sebacoyl chloride. All the synthesized polyamides showed good solubility in amide type solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide, and N,N-dimethylformamide and they exhibited inherent viscosities in the range of 0.44-0.52 dL/g. According to the DMTA analysis, the glass transition temperatures of the polyamides were found to be 131-187 °C. Thermogravimetric analysis indicated that the polymers were stable up to 190 °C and the 10% weight loss temperatures were recorded in the range of 350-418 °C in air atmosphere.     

Regioselective Suzuki coupling on pyridinium N-(3,5-dibromoheteroar-2-yl)aminides

A regioselective Suzuki-Miyaura cross-coupling reaction on 3′,5′-dibromo pyridinium N-(2′-azinyl)aminides is reported. A series of 3′-aryl(or heteroaryl)-5′-bromo-pyridinium N-(2′-pirazinyl)aminides were obtained in good yields. Two isomeric 3′,5′-diaryl pyridinium N-(2′-azinyl)aminides were also prepared.     

A novel titanium tetrachloride-induced rearrangement of an enantiopure 4-naphthyldioxolane. The possible role of titanium in the umpolung of tosyloxy and chlorine

The rearrangement of (2′S,4′R,5′S)-2-(2′,5′-dimethyl-1′,3′-dioxolan-4′-yl)-4,5,7-trimethoxynaphthalen-1-yl 4″-methylbenzenesulfonate with titanium(IV) chloride affords (1R,3S,4R)-10-chloro-6,7,9-trimethoxy-1,3-dimethyl-3,4-dihydro-4-hydroxynaphtho[1,2-c]pyran in good yield. This transformation is characterized by two unusual aromatic substitution reactions in that, in one, tosyloxy is lost and, in the other, aromatic chlorination occurs with titanium(IV) chloride as the source of chlorine.     

Synthesis and characterization of new aromatic polyesters containing cardo decahydronaphthalene groups

Three cardo bisphenols containing decahydronaphthalene group viz., 4,4′-(octahydro-2(1H)-naphthylidene)bisphenol, 4,4′-(octahydro-2(1H)-naphthylidene)bis-3-methylphenol and 4,4′-(octahydro-2(1H)-naphthylidene)bis-3,5-dimethylphenol were synthesized starting from commercially available 2-naphthol and were utilized for synthesis of new aromatic polyesters by phase transfer-catalyzed interfacial polycondensation with isophthaloyl chloride, terephthaloyl chloride and a mixture of isophthaloyl chloride and terephthaloyl chloride (50:50 mol %). Inherent viscosities and number average molecular weights (M_n) of polyesters were in the range 0.35-0.84 dL/g and 13,300-48,500 (Gel Permeation Chromatography, polystyrene standard), respectively. Polyesters were readily soluble in organic solvents such as dichloromethane, chloroform, tetrahydrofuran, meta-cresol, pyridine, N,N-dimethylformamide, N,N-dimethylacetamide, and 1-methyl-2-pyrrolidinone at room temperature and could be cast into tough, transparent and flexible films from their chloroform solutions. Wide-angle X-ray diffraction measurements revealed the amorphous nature of polyesters. The glass transition temperature of polyesters was in the range 207-287 °C. The temperature at 10% weight loss (T₁₀), determined from thermogravimetric analysis of polyesters, was in the range 425-460 °C indicating their good thermal stability.     

Synthesis and optical properties of conjugated N,N-dimethyl and thienyl end-capped 2,5-(arylethynyl)thiophene oligomer structures

End-capped (N,N-dimethylaminophenyl) and 2′-thienylethynyl 2,5-thiophene oligomer structures were synthesized by heterocoupling between the terminal acetylenes such as: p-(N,N-dimethylaminophenyl)ethyne (3) [or 1-(p-(N,N-dimethylaminophenyl)-2-p-(ethynylphenyl)ethyne, 4]; p-(β-ethenyl-2′-thienyl)phenylethyne (E-9) [or p-(β-ethynyl-2′-thienyl)phenylethyne, 11], and 2,5-diiodothiophene, catalyzed by the Cl₂Pd(PPh₃)₂/CuI system, in good to excellent yields. The 2,5-di[(3′,5′-di(trimethylsilylethynyl)phenyl]_x-1-ethynyl]thiophene oligomers were prepared by heterocoupling between 3′,5′-di[(trimethylsilylethynyl)phenyl]_x-1-ethyne (n = 0-2) terminal acetylenes and 2,5-diiodothiophene, in excellent yields. The terminal acetylenes were efficiently prepared by a specific protection-deprotection methodology. All the ethynylphenyl compounds obtained show fluorescence radiation emission, with a bathochromic shift of the wavelength that increases with the chain conjugation.     

Novel optically active poly(amide-imide)s from N,N-(4,4-carbonyldiphthaloyl)-bis-l-phenylalanine diacid chloride and aromatic diamines by microwave irradiation

3,3^′,4,4^′-benzophenonetetracarboxylic dianhydride (4,4^′-carbonyldiphthalic anhydride) (1) was reacted with l-phenylalanine (2) in a mixture of acetic acid and pyridine (3:2) and the resulting imide-acid [N,N^′-(4,4^′-carbonyldiphthaloyl)-bis-l-phenylalanine diacid] (4) was obtained in high yield. The compound (4) was converted to the N,N^′-(4,4^′-carbonyldiphthaloyl)-bis-l-phenylalanine diacid chloride (5) by reaction with thionyl chloride. A new facile and rapid polycondensation reaction of this diacid chloride (5) with several aromatic diamines such as 4,4^′-diaminodiphenyl methane (6a), 2,4-diaminotoluene (6b), 4,4^′-sulfonyldianiline (6c), p-phenylenediamine (6d), 4,4^′-diaminodiphenylether (6e), m-phenylenediamine (6f), benzidine (6g) and 2,6-diaminopyridine (6h) was developed by using a domestic microwave oven in the presence of a small amount of a polar organic medium such as o-cresol. The polymerization reactions proceeded rapidly, compared with the conventional solution polycondensation, and was completed within 7 min, producing a series of optically active poly(amide-imide)s with high yield and inherent viscosity of 0.22-0.52 dl/g. All of the above polymers were fully characterized by IR, elemental analyses and specific rotation. Some structural characterization and physical properties of this optically active poly(amide-imide)s are reported.     

Reactions of 1,4-bis(tetrazole)benzenes: formation of long chain alkyl halides

The reactions of 1,4-bis[2-(tributylstannyl)tetrazol-5-yl]benzene with α,ω-dibromoalkanes were carried out in order to synthesise pendant alkyl halide derivatives of the parent bis-tetrazole. This led to the formation of several alkyl halide derivatives, substituted variously at N1 or N2 on the tetrazole ring. The crystal structures of 1,4-bis[(2-(4-bromobutyl)tetrazol-5-yl)]benzene (2-N,2-N′), 1,4-bis[(2-(4-bromobutyl)tetrazol-5-yl)]benzene (1-N,2-N′) and 1,4-bis[(2-(8-bromooctyl)tetrazol-5-yl)]benzene (2-N,2-N′) are reported. Further discussion involves the structure of 1,4-bis[2-(6-bromohexyl)-2H-tetrazol-5-yl]benzene (2-N,2-N′) previously reported.     

Targeted metabolic profiling of phenolics in urine and plasma after regular consumption of cocoa by liquid chromatography–tandem mass spectrometry

The biological properties of cocoa (Theobroma cacao L.) polyphenols are strictly dependent on their bioavailability. A long-term cocoa feeding trial was performed with subjects at high risk for cardiovascular disease. Subjects (n = 42) received two sachets of 20 g of cocoa powder/day with 250 mL of skimmed milk each, or only 500 mL/day of skimmed milk, both for two 4-week periods. The phenolic metabolic profile including phase II conjugated metabolites and phenolic acids derived from the intestinal microbiota was determined by LC-MS/MS in both 24-h urine and fasting plasma. The analysis of 24-h urine revealed significant increases of phase II metabolites, including glucuronides and sulfate conjugates of (−)-epicatechin, O-methyl-epicatechin, 5-(3′,4′-dihydroxyphenyl)-γ-valerolactone and 5-(3′-methoxy-4′-hydroxyphenyl)-γ-valerolactone, after regular cocoa intake. In the case of plasma, only glucuronide conjugates of dihydroxyphenylvalerolactones increased. Regular consumption of cocoa also resulted in a significant increase in the urinary excretion of colonic microbial-derived phenolic metabolites, including vanillic, 3,4-dihydroxyphenylacetic and 3-hydroxyphenylacetic acids, and particularly 5-(3′,4′-dihydroxyphenyl)-γ-valerolactone, whereas only the two latter metabolites showed a significant increase in fasting plasma. The results found herein indicate that 5-(3′,4′-dihydroxyphenyl)-γ-valerolactone and hydroxyphenylacetic acids could be good biomarkers of the regular consumption of cocoa and therefore, of flavanol-rich foods.     

Polymerization of acrylate monomers with MAO activated iron(II) and cobalt(II) complexes bearing tri- and tetradentate nitrogen ligands

Octahedral iron(II) and cobalt(II) based complexes, [N,N′-di(quinoline-2-methylene)-1,2-phenylenediimine]MCl₂, and [N,N′-di(quinoline-2-methylene)diiminocyclohexane]MCl₂ (M = Co and Fe), bearing tetradentate diimino nitrogen ligands were prepared and used in tert-butylacrylate (t-BA) polymerization after activation with methylaluminoxane (MAO). In general, polyacrylates with high molar mass and narrow molar mass distribution (MMD ≈ 2) were obtained. In order to understand the influence of the ligand on the polymerization process, polymerization behaviour of the hexacoordinated complexes was compared to pentacoordinated iron(II) and cobalt(II) complexes, 2,6-bis[1-(cyclohexylimido)ethyl]pyridine MCl₂ (M = Co and Fe), bearing tridentate diimine nitrogen ligands as well as to free iron(II) chloride. The ability of the MAO activated hexacoordinated complexes to polymerize methylacrylate (MA) and methyl methacrylate (MMA) was also considered, but reduced activities as well as lower molar mass polymers were obtained than in the experiments with t-BA.     

An iodide/anion exchange route to benzimidazolylidene silver complexes from benzimidazolium iodide: Crystal structures of N,N′-dibutylbenzimidazolylidene silver chloride, bromide, cyanide and nitrate

Syntheses of N,N′-dibutylbenzimidazolylidene silver complexes having chloride, nitrate or cyanide as an anion part through an iodide/anion exchange from N,N′-dibutylbenzimidazolium iodide are described, representing a practical route to benzimidazolylidene silver complexes from readily accessible benzimidazolium iodide. The crystal structures of N,N′-dibutylbenzimidazolylidene silver chloride, bromide, cyanide and nitrate have been determined, showing a close ligand-unsupported Ag-Ag interaction in [(NHC)₂]Ag⁺[AgX₂]⁻ and a “T” shape geometry about the silver(I) cation in complexes of chloride, bromide and cyanide, but a nearly linear shape in the bis(N,N′-dibutylbenzimidazolylidene) silver complex [ with non-coordinating nitrate anion.     

Synthesis of some new tertiary amines and their application as co-catalysts in combination with l-proline in enantioselective Baylis-Hillman reaction between o-nitrobenzaldehyde and methyl vinyl ketone

A chiral benzodiazepine derivative 1 was synthesized starting from o-nitrobenzoyl chloride and methyl l-prolinate hydrochloride. Diastereomeric (1R,2R,1′S)-(+)-2-[N-methyl-N-(α-phenylethyl)amino]cyclohexanol 3a and (1S,2S,1′S)-(+)-2-[N-methyl-N-(α-phenylethyl)amino]cyclohexanol 3b were synthesized starting from (S)-α-phenylethylamine and cyclohexene oxide via ring-opening, diastereomer separation and N-methylation. (S,S)-octahydrodipyrrolo[1,2-a:1′,2′-d]pyrazin 5 was synthesized from methyl l-prolinate. Chiral tertiary amines 1, 3a, 3b and 5 almost cannot catalyze the Baylis-Hillman reaction between o-nitrobenzaldehyde and methyl vinyl ketone (MVK). However, they functioned as efficient catalysts for this reaction in the presence of l-proline. The corresponding adducts were obtained in good yields with enantioselectivity of 83% ee, 81% ee, 51% ee and 66% ee, respectively.     

Synthesis and characterization of difunctional blue light-emitting molecules containing hole-transporting triphenylamino units

The synthesis of new difunctional (i.e., light-emitting and hole-transporting) fluorophore molecules, 2,2′-difuryl-4,4′-(N,N,N′,N′-tetraphenyl)diaminobiphenyl and 5,5′-bis(4-N,N′-diphenylaminophenyl)-2,2′-bifuryl, which contain hole-transporting triphenylamino units, are reported. These difunctional molecules emit intense blue photoluminescence and further reveal high HOMO energy values as well as high glass transition temperatures.     

Synthesis of a solvent-sensitive highly fluorescent derivative of perfluorocyclopentene

A solvent-sensitive highly fluorescent compound, N-[2-(1′,3′,4′,4′,5′,5′-hexafluorocyclopentenyl)]-4-(5-methoxy-thiazolyl)pyridine (1D) was synthesized as an unexpected product of the reaction of 4-bromo-5-methoxy-2-(4-pyridyl)thiazole (1B) with perfluorocyclopentene in the presence of n-BuLi. Primary mechanism of this reaction was proposed, and the photophysical properties of 1D in different solvents were studied.     

Synthesis of 4-N-alkyl and ribose-modified AICAR analogues on solid support

Herein, we report the solid-phase synthesis of several 5-aminoimidazole-4-(N-alkyl)carboxamide-1-ribosides (4-N-alkyl AICARs) and the corresponding 2′,3′-secoriboside derivatives. The method uses the N-1-dinitrophenyl-inosine 5′-bonded to a solid support. This inosine derivative has the C-2 of the purine base strongly activated towards the attack of N-nucleophiles thus allowing the preparation of several N-1 alkylated inosine supports from which a small library of 4-N-alkyl AICAR derivatives has been synthesized. A set of new 4-N-alkyl AICA-2′,3′-secoriboside derivatives have also been obtained in high yields by solid-phase cleavage of the 2′,3′-ribose bond.     

Influence of hydrophobe content on the solution rheology of hydrophobically modified terpolymer of SO2, N,N-diallyl-N-carboethoxymethylammonium chloride

Rheological properties of hydrophobically modified copolymer of SO₂, N,N-diallyl-N-carboethoxymethylammonium chloride and the hydrophobic monomer N,N-diallyl-N-octadecylammonium chloride were studied. The influence of hydrophobe content (HP) and polymer concentration was investigated. Polymers with HP content in the range 1.5-5% were examined and the concentration was varied in the range 2-5 wt%. Both dynamic and steady-shear experiments were performed in ARES rheometer. Copolymers were observed to exhibit typical viscoelastic behavior even with low HP content. Both the dynamic viscosity, η′ and storage modulus, G′, increase with the increase of both the polymer concentration and the HP content of the system. The viscosity of the high HP content polymer showed a strong shear dependency, while G′ was a weak function of frequency and gel-like behavior was observed. The zero-shear viscosity, η₀, showed a strong concentration dependency (η₀ ∼ ?^α; 1.1 < α < 5.9). The concentration dependency of η₀ suggests that intermolecular association is dominant in the high HP content polymer. Control of the HP content and polymer concentration of this class of polymers can lead to a wide range of interesting rheological properties.     

A series of metal-organic frameworks constructed with arenesulfonates and 4,4′-bipy ligands

Five transition metal compounds containing arenesulfonates and 4,4′-bipy ligands, namely [Zn₂(N,N′-4,4′-bipy)(N-4,4′-bipy)₂(H₂O)₈](bpds)₂ · 5H₂O (1), [Ag₂(N,N′-4,4′-bipy)₂(bpds)] (2), [Cd(N,N′-4,4′-bipy)(H₂O)₄]₂(4-abs)₄ · 5H₂O (3), [Cu(N,N′-4,4′-bipy) (O-bs)₂(H₂O)₂] · 4H₂O (4), and [Zn(N,N′-4,4′-bipy)₂(H₂O)₂](4,4′-bipy)(bs)₂ · 4H₂O (5) (4,4′-bipy = 4,4′-bipyridine, bpds = 4,4′-biphenyldisulfonate, 4-abs = 4-aminobenzenesulfonate, bs = benzenesulfonate), have been synthesized and characterized by X-ray single crystal diffraction, elemental analyses and TG analyses, in order to investigate the coordination chemistry of arenesulfonates and 4,4-bipy, as well as to construct novel coordination frameworks via mixed-ligand strategy. Compounds 2, 4 and 5 could be obtained via hydrothermal or aqueous reactions. Compound 1 forms a binuclear octahedral metal complex. Compounds 2–4 form polymeric chains. Compound 5 consists of 2D square grids with one intercalated 4,4′-bipy molecule. Weak Ag–Ag interactions are observed in compound 2. These complexes show great structural varieties and there are three different coordination modes observed for both the 4,4′-bipy and the sulfonate ligands.     

Syntheses and studies of flexible amide ligands: a toolkit for studying metallo-supramolecular assemblies for anion binding

The syntheses of seven flexible bidentate bis-pyridyl diamide and four monodentate pyridyl amide ligands containing central amide units are described. The bis-pyridyl ligands were prepared in one step from commercially available compounds in moderate to good yield. These compounds all possess external metal coordinating pyridyl groups and internal amide functionalities, with the potential to bind anions. Crystal structures of six of the bis-pyridyl diamide ligands are described. The four compounds with xylene cores N,N′-[1,3-phenylenebis(methylene)]bis-3-pyridinecarboxamide 1, N,N′-[1,3-phenylenebis(methylene)]bis-4-pyridinecarboxamide 2, N,N′-[1,4-phenylenebis(methylene)]bis-3-pyridinecarboxamide 3 and N,N′-[1,4-phenylenebis(methylene)]bis-4-pyridinecarboxamide 4 crystallize with extensive amide N-H?OC hydrogen bonding between the diamide compounds, giving rise to two and three dimensional hydrogen bonded networks. N,N′-Bis(3-pyridylmethyl)benzene-1,3-dicarboxamide 5, the only compound with the amide groups directly attached to a central benzene core, was not able to be crystallised. N,N′-2,6-Bis(3-pyridylmethyl)pyridine dicarboxamide 6 and N,N′-2,6-bis(4-pyridylmethyl)pyridine dicarboxamide 7 have a mismatch of hydrogen bond donor and acceptor regions preventing ready involvement of the amide NH groups in network formation. For comparison we also prepared compounds N,N′-2′-propyl-6-(3-pyridylmethyl)pyridine dicarboxamide 10 and N,N′-2′-propyl-6-(4-pyridylmethyl)pyridine dicarboxamide 11 with two amide groups but only the one external donor pyridyl moiety, and compounds N-6-[(3-pyridylmethylamino)carbonyl]-2-pyridinecarboxylic acid methyl ester 8 and N-6-[(4-pyridylmethylamino)carbonyl]-2-pyridinecarboxylic acid methyl ester 9, which have only the one amide.     

Enantiospecific synthesis, separation and olfactory evaluation of all diastereomers of a homologue of the sandalwood odorant Polysantol

The four stereoisomers of (5E)-4,4-dimethyl-6-(2′,2′,3′-trimethylcyclopent-3′-en-1′-yl)-hex-5-en-3-ol, a homologue of the valuable sandalwood-type odorant Polysantol^®, were enantiospecifically synthesized from (+)- and (−)-α-pinene, through (−)- and (+)-campholenic aldehyde, by aldol condensation with 3-pentanone, deconjugative α-methylation and reduction. The mixtures of epimeric alcohols obtained after reduction were separated by means of derivatization with (−)-(1S)-camphanic chloride. The enantiomerically pure final products were evaluated organoleptically.