Insulated π-conjugated metallopolymers

Recently, there has been a progressive development of insulated π-conjugated metallopolymers with accumulated features of π-conjugated bridging units, transition metal complexes, and encapsulating moieties, as higher-order functionalized materials. A number of insulated conjugated metallopolymers have been successfully synthesized and their fascinating properties have been reported. In addition to the conventional features derived from π-conjugation and transition metals, their insulated structures can compensate for solubility, a disadvantage in conventional metallopolymers, and enhance their functionalities, such as sensing, luminescence, and conduction. In this review, we summarize the synthetic methodologies, structural characteristics, and functionalities of one-dimensional insulated π-conjugated metallopolymers, while focusing on the effect of transition metals and insulation on their properties.     

Electronic structure and aromaticity of planar singlet π-electron monocyclic π2 carbenes

Induced -electron ring currents and relative diamagnetic susceptibilities of planar singlet -electron monocyclic ² carbenes are calculated in the coupled variant of perturbation theory in the CNO method. It is shown that the parity theorem holds for charged planar ² and ² carbenes formally generated by the detachment of a proton or a hydride ion from alternant hydrocarbons. This leads, in such carbenes, to the same energies of singlet-singlet and singlet-triplet transitions, electric polarizabilities, conjugation energies, -electron ring currents, diamagnetic susceptibilities and current contributions to chemical shifts, whereas the charge contributions to the latter are of opposite signs.Donbas State Academy of Building and Architecture, 1 Derzhavina St., 339023 Makeevka, Donetsk Region, Ukraine. Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 32, No. 3, pp. 157–162, May–June, 1996. Original article submitted December 5, 1994.     

Palladium π-adduct of corannulene

The ternary palladium π-adduct of corannulene and benzene, [Pd₆Cl₁₂·(C₂₀H₁₀)₂·(C₆H₆)₂]·C₆H₆ (1), has been prepared by reacting the cubic Pd₆Cl₁₂-cluster with C₂₀H₁₀ in benzene. It was structurally characterized to reveal η¹-binding of Pd₆Cl₁₂ to a hub C-atom of the convex surface of corannulene (Pd?C, 3.085(3) Å) and its η⁶-complexation to benzene (Pd?C_centroid, 3.431(3) Å). The behavior and persistence of 1 in some aromatic solvents has been revealed by UV-vis and ¹H NMR spectroscopy studies.     

C=X π-Systeme

Im Rahmen des Graduiertenkollegs “Hochreaktive Mehrfachbindungssysteme” hatten G. Erker und J. Grobe vom 16. bis 18. November 1994 schon zum zweiten Mal nach Münster eingeladen. “Organic and Inorganic Chemistry of Reactive C=X π-Systems” waren diesmal das Thema.     

A π-stacked phenylacetylene dimer

The structure of the phenylacetylene-dimer has been elucidated using IR-UV double resonance spectroscopy in combination with high level ab initio calculations at the CCSD(T)/CBS level. The IR spectra in the acetylenic and the aromatic C-H stretching regions indicate that the two phenylacetylene moieties are in identical environments and very similar to the phenylacetylene monomer. Calculated stabilization energies and the free energies at the CCSD(T)/CBS level favor the formation of an anti-parallel π-stacked structure. The DFT-SAPT energy decomposition analysis points out that the anti-parallel π-stacked structure maximizes electrostatic as well as the dispersion components of energy. The observed IR spectra are consistent with the anti-parallel π-stacked structure.     

As Nice as π: Aromatic Reactions Activated by π-Coordination to Transition Metals

π-Coordination of aromatic molecules to metals dramatically alters their reactivity. For example, coordinated carbons become more electrophilic and C−H bonds of coordinated rings become more acidic. For many years, this change in reactivity has been used to trigger reactions that would not take place for uncoordinated arenes, however, there has been a recent resurgence in use of this technique, in part due to the development of catalytic reactions in which π-coordination is transient. In this Minireview, we describe the key reaction chemistry of arenes coordinated to a range of transition metals, including stereoselective reactions and industrially relevant syntheses. We also summarise outstanding examples of catalytic processes. Finally, we give perspectives on the future direction of the field, with respect to both reactions that are stoichiometric in activating metals and those employing catalytic metal.     

Electrically Conductive π-Intercalated Graphitic Metal-Organic Framework Containing Alternate π-Donor/Acceptor Stacks

Two-dimensional graphitic metal–organic frameworks (GMOF) often display impressive electrical conductivity chiefly due to efficient through-bond in-plane charge transport, however, less efficient out-of-plane conduction across the stacked layers creates large disparity between two orthogonal conduction pathways and dampens their bulk conductivity. To address this issue and engineer higher bulk conductivity in 2D GMOFs, we have constructed via an elegant bottom-up method the first π-intercalated GMOF (iGMOF1) featuring built-in alternate π-donor/acceptor (π-D/A) stacks of Cu^II-coordinated electron-rich hexaaminotriphenylene (HATP) ligands and non-coordinatively intercalated π-acidic hexacyano-triphenylene (HCTP) molecules, which facilitated out-of-plane charge transport while the hexagonal Cu₃(HATP)₂ scaffold maintained in-plane conduction. As a result, iGMOF1 attained an order of magnitude higher bulk electrical conductivity and much smaller activation energy than Cu₃(HATP)₂ (σ=25 vs. 2 S m⁻¹, E_a=36 vs. 65 meV), demostrating that simultaneous in-plane (through-bond) and out-of-plane (through πD/A stacks) charge transport can generate higher electrical conductivity in novel iGMOFs.     

Organometallic dithiolene complexes of benzenedithiolate analogues with π-coordinating and π-interacting Cp* ligand

Organometallic dithiolene complexes, which were formulated as [Cp*M(dcbdt)] and [Cp*M(dcdmp)] (M = Co, Rh, Ir; Cp* = η⁵-pentamethylcyclopentadienyl, dcbdt = 4,5-dicyanobenzene-1,2-dithiolate, dcdmp = 2,3-dicyano-5,6-dimercaptopyrazine) were prepared from a low valent Cp*Co^I or high valent Cp*M^III species (M^III = Co^III, Rh^III, Ir^III). The UV-Vis absorption spectral and electrochemical data of them were obtained. The lowest absorption (HOMO-LUMO) energies of them became redshift in order of the Co > Rh > Ir complexes. The reduction potentials suggested that the central metal modifies their LUMO levels. The molecular and crystal structures of [Cp*Co(dcbdt)] (3a), [Cp*Co(dcdmp)] (4a) and [Cp*Rh(dcdmp)] (4b) were determined by X-ray diffraction studies. The cobalt complexes 3a and 4a were monomeric, formally 16-electron complexes and have two-legged piano-stool geometries. The crystal structure of 3a indicated some plane-to-plane intermolecular interactions such as benzene?benzene interaction on the dcbdt ligand and two Cp*?benzene π-π stackings. 4a showed plane-to-plane interaction with a pseudo-4-fold-symmetry arrangement between the pyrazine moieties on the dcdmp ligand. The rhodium complex 4b was dimeric in the crystal to form a criss-cross arrangement and had a three-legged piano-stool geometry, but it was monomerized in solution. The dimer of 3b was observed in the oxidation process of the cyclic voltammogram.     

Dimensionally oriented redox-active π-conjugated systems

Porphyrins bearing the redox-active phenylenediamine pendant groups are synthesized to afford dimensionally oriented π-conjugated systems. The structural and electronic characteristics depend on the atropisomers. In the fluorescence emission spectra, the emission from the porphyrin moiety is almost completely quenched. Zinc complexation of the αααα isomers gives the corresponding zinc porphyrins bearing four phenylenediamine strands. Treatment with a bidentate ligand, DABCO, leads to the sandwich dimer complex, in which the porphyrin moieties are surrounded by π-conjugated pendant groups. p-t-Butylcalix[4]arenes bearing four redox-active phenylenediamine pendant groups on the lower rim are synthesized and characterized both spectroscopically and electrochemically. The interconversion of the oxidation states of the pendant groups is demonstrated both chemically and electrochemically.     

Bio-regeneration of π-complexation desulfurization adsorbents

The coupling of adsorption desulfurization and biodesulfurization is a new approach to produce clean fuels. Sulfur compounds are firstly adsorbed on adsorbents, and then the adsorbents are regenerated by microbial conversion. п-Complexation adsorbent, Cu(l)-Γ, was obtained by ion exchanging Γ-type zeolite with Cu²⁺ and then by auto-reduction in helium at 450°C for 3 h. Dibenzothiophene (DBT) was used as a model compound. The effects of cell concentration, volume of oil phase, the ratio of aqueous phase to adsorbent on DBT desorption by a bacterium were studied. The amounts of DBT desorbed and 2-HBP produced can be apparently increased with addition of n-octane. BDS activity can be improved by increasing cell concentration and the ratio of water-to-adsorbent. 89% of DBT desorbed from the adsorbents can be converted to 2-HBP within 6 h and almost 100% within 24 h, when the volume ratio of oil-to-water was 1/5 mL/mL, the cell concentration was 60 g·L^-1, and the ratio of adsorbent-to-oil was 0.03 g- mL^-1. The amount of 2-HBP produced was strongly dependent on the volume ratio of oil-to-water, cell concentration and amount of adsorbent. Adsorption capacity of the regenerated adsorbent is 95% that of the fresh one after being desorbed with Pseudomonas delafieldii R-8, washed with n-octane, dried at 100°C for 24 h and auto-reduced in He.     

Synthetic Applications of π-Electron-Deficient Sulfones

Abstract

The use of π-electron-deficient aryl sulfones, especially 3,5-bis(trifluoromethyl) phenyl alkyl sulfones (BTFP-sulfones) as soft nucleophiles, as caboxylic acid protecting group and in Julia–Kocienski olefination reactions is described. In the case of α-(arylsulfonyl)acetates dialkylation, reactions are performed under phase-transfer analysis (PTC) conditions using K ₂ CO ₃ as base. Esters derived from 2-(arylsulfonyl)ethanol can be deprotected using aqueous NaHCO ₃ . Alkyl BTFP sulfones are coupled with carbonyl compounds using KOH or P4-t-Bu as bases to give the corresponding alkenes after Smiles rearrangement.     

Pairing theorem for π-electron carbenes

The pairing theorem is proved for planar carbenes formally generated by removing a proton or hydride ion from alternant hydrocarbons, and having identical structure and multiplicity, opposite charges, and different states (² or ²) of the carbene carbon atom. According to this theorem, the elements of the bond-order/residual-charge matrix between different alternant sets coincide with each other, but those between identical sets have opposite signs; for elements of the spin-density matrix, the relationship is the reverse. For such carbenes, this leads to coincidence of the singlet-singlet and singlet-triplet transition energies, electric polarizabilities, conjugation energies, -electron ring currents, diamagnetic susceptibilities, and current contributions to chemical shifts, whereas the charge contributions to the chemical shifts have opposite signs.Donbass State Academy of Construction and Architecture, 1 Derzhavin Street, Makeevka 339023, Donetsk Oblast, Ukraine. Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 32, No. 3, pp. 147–152, May–June, 1996. Original article submitted December 16, 1994.     

C-acylation of π-rich heterocycles byo-chlorobenzenesulfonylisocyanate

Nitrogen-containing -rich heterocycles under mild conditions are acylated by o-chlorobenzene-sulfonylisocyanate, forming C-arylsulfonylcarbamoyl derivatives; O- and S-containing heterocycles do not react under these conditions.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 205–209, February, 1996.     

Greatly enhanced intermolecular π-dimer formation of a porphyrin trimer radical trications through multiple π bonds

A trefoil‐like porphyrin trimer linked by triphenylamine (TPA‐TPZn₃) was synthesized. A three‐electron oxidation of TPA‐TPZn₃ forms a radical trication (TPA‐TPZn₃³⁺), in which each porphyrin ring undergoes a one‐electron oxidation. The radical trication TPA‐TPZn₃³⁺ spontaneously dimerizes to afford (TPA‐TPZn₃)₂⁶⁺ in CH₂Cl₂. The characteristic charge‐resonance band due to the charge delocalization over the π system of (TPA‐TPZn₃)₂⁶⁺ was observed in the NIR region. The initial oxidation potential of TPA‐TPZn₃ is negatively shifted relative to that of the corresponding monomer porphyrin, which results from the stabilization of the oxidized state of TPA‐TPZn₃ associated with the dimerization. The thermodynamic parameters (i.e., ΔH, ΔS, and ΔG) for the formation of (TPA‐TPZn₃)₂⁶⁺ were determined by measuring Vis/NIR spectra at various temperatures. The formation constant of (TPA‐TPZn₃)₂⁶⁺ is significantly larger than that of the radical cation dimer of the corresponding monomer porphyrin (e.g., over 2000‐fold at 233 K). The electronic states were investigated using EPR spectroscopic analysis. The greatly enhanced dimerization of TPA‐TPZn₃³⁺ results from multiple π‐bond formation between the porphyrin radical cations.     

Efficient syntheses of π-electron deficient macrocycles

ABSTRACT

Cyclobis(paraquat-p-phenylene) (CBPQT⁴⁺) cyclophane represents an ideal π-electron deficient macrocycles, which demonstrates the extraordinary ability of hosting a variety of π-electron-rich guests in its rigid, preorganised cavity. However, this macrocycle undergoes large ring strain and therefore its preparation is often low yielding. In order to increase its yields, high-dilution conditions and template-directed synthesis are employed, which are rather time-consuming, i.e. a few weeks including template removal. Herein, we attempt to solve these problems by either using click reaction, or decreasing the ring strain by using a flexible linker. Three analogues of CBPQT⁴⁺ ring were synthesised without the need of guest template, each of which contains two bipyridinium units. Two of these three macrocycles are able to recognise π-electron rich guests within their cavities. However, the one obtained via click reaction demonstrates low guest recognition ability.     

Interpolation of shared π-bonds in cyclofusene

Cyclofusene is a corona-condensed benzenoid whose graph-theoretic representation consists of hexacycles with exactly two non-adjacent shared II-bonds. We showed that the number of linear chains, k, is an upper bound for m, the number of shared II-bonds. Furthermore, this upper bound is achievable. In this paper, we show that given a positive even integer m < k, there exists m shared II-bonds. In other words, the number of shared II-bonds in cyclofusene has the even interpolation property.     

Twisted π-system chromophores for all-optical switching

Molecular chromophores with twisted π-electron systems have been shown to possess unprecedented values of the quadratic hyperpolarizability, β, with very large real parts and much smaller imaginary parts. We report here an experimental and theoretical study which shows that these twisted chromophores also possess very large values of the real part of the cubic hyperpolarizability, γ, which is responsible for nonlinear refraction. Thus, for the two-ring twisted chromophore TMC-2 at 775 nm, relatively close to one-photon resonance, n(2) extrapolated to neat substance is large and positive (1.87 × 10(-13) cm(2)/W), leading to self-focusing. Furthermore, the third-order response includes a remarkably low two-photon absorption coefficient, which means minimal nonlinear optical losses: the T factor, α(2)λ/n(2), is 0.308. These characteristics are attributed to closely spaced singlet biradical and zwitterionic states and offer promise for applications in all-optical switching.     

Spectroscopic probes with changeable π-conjugated systems

Spectroscopic probes have been extensively investigated and used widely in many fields because of their powerful ability to improve analytical sensitivity, and to offer greater temporal and spatial resolution (in some cases a molecule event may be visualized by the naked eye). So far, different photophysical mechanisms, such as charge transfer, photo-induced electron transfer and fluorescent resonance energy transfer, have been employed to develop various spectroscopic probes with superior properties. However, these photophysical mechanisms depend on the energy levels of molecular orbitals, which are usually difficult to accurately determine. This would lead to the poor prediction of analytical performance of the designed probe. Instead, the change of π-conjugated systems induced by chemical reactions is often accompanied by a distinct alteration in spectroscopic signal, which is more predictable and is of high signal/background ratio. This mechanism can serve as an effective measure for developing excellent spectroscopic probes, but to our knowledge, has not been systematically summarized. In this feature article, we review the development of spectroscopic probes with changeable π-conjugated systems, which is catalogued according to the fluorochromes: fluorescein, rhodamine, spiropyran, squaraine, coumarin, cyanine, etc. Two main strategies for constructing these spectroscopic probes, including ring-closing reaction and nucleophilic addition reaction, are summarized, and the merits and limitations of the probes are discussed.     

Second-order dispersion interactions in π-conjugated polymers

We calculate the ground state and excited state second-order dispersion interactions between parallel π-conjugated polymers. The unperturbed eigenstates and energies are calculated from the Pariser-Parr-Pople model using CI-singles theory. Based on large-scale calculations using the molecular structure of trans-polyacetylene as a model system and by exploiting dimensional analysis, we find that: (1) For inter-chain separations, R, greater than a few lattice spacings, the ground-state dispersion interaction, ΔE(GS), satisfies, ΔE(GS)～L(2)/R(6) for L ? R and ΔE(GS)～L/R(5) for R ? L, where L is the chain length. The former is the London fluctuating dipole-dipole interaction while the latter is a fluctuating line dipole-line dipole interaction. (2) The excited state screening interaction exhibits a crossover from fluctuating monopole-line dipole interactions to either fluctuating dipole-dipole or fluctuating line dipole-line dipole interactions when R exceeds a threshold R(c), where R(c) is related to the root-mean-square separation of the electron-hole excitation. Specifically, the excited state screening interaction, ΔE(n), satisfies, ΔE(n) ～ L∕R(6) for R(c) < L ? R and ΔE(n) ～ L(0)∕R(5) for R(c) < R ? L. For R < R(c) < L, ΔE(n) ～ R(-ν), where ν ? 3. We also investigate the relative screening of the primary excited states in conjugated polymers, namely the n = 1, 2, and 3 excitons. We find that a larger value of n corresponds to a larger value of ΔE(n). For example, for poly(para-phenylene), ΔE(n = 1) ? 0.1 eV, ΔE(n = 2) ? 0.6 eV, and ΔE(n = 3) ? 1.2 eV (where n = 1 is the 1(1)B(1) state, n = 2 is the m(1)A state, and n = 3 is the n(1)B(1) state). Finally, we find that the strong dependence of ΔE(n) on inter-chain separation implies a strong dependency of ΔE(n) on density fluctuations. In particular, a 10% density fluctuation implies a fluctuation of 13 meV, 66 meV, and 120 meV for the 1(1)B(1), m(1)A state, and n(1)B(1) states of poly(para-phenylene), respectively. Our results for the ground-state dispersion are applicable to all types of conjugated polymers. However, our excited state results are only applicable to conjugated polymers, such as the phenyl-based class of light emitting polymers, in which the primary excitations are particle-hole (or ionic) states.