Catalytic oxidations of enolizable ketones using 2-alkylidene-4-oxothiazolidine vinyl bromide

Direct oxidation of enolizable ketones to α-hydroxy derivatives, vicinal dicarbonyls or tricarbonyl compounds has been achieved by a catalytic amount of 2-alkylidene-4-oxothiazolidine vinyl bromide in DMSO as a solvent. The yields range from moderate to good.     

Carbon-bromine cleavage by dimethyl sulfoxide: the key step of C(5) functionalization of push-pull 2-alkylidene-4-oxothiazolidine vinyl bromides

Push-pull 2-alkylidene-4-oxothiazolidine vinyl bromides undergo efficient C(5) functionalization through DMSO-assisted carbon-bromine cleavage, followed by a bromine transfer-substitution (or elimination) sequence. A mechanism for this novel transformation is proposed.     

Unusual mode of reactivity of 2-alkylidene-4-oxothiazolidine S-oxides under the Pummerer reaction conditions

The reactivity of 2-alkylidene-4-oxothiazolidine S-oxides under the Pummerer reaction conditions, using Ac₂O, TFAA, SOCl₂ and SOBr₂ as initiators, has been examined. Almost all reactions proceeded with absolute regioselectivity yielding α-substituted sulfides or vinyl-chloro derivatives. The mechanism for the formation of the latter products was postulated and proved experimentally.     

Electrochemical behavior of 5-substituted 2-alkylidene-4-oxothiazolidine derivatives studied by cyclic voltammetry

This study demonstrates the electrochemical activity of selected 2-alkylidene-4-oxothiazolidine compounds containing different substituents at the C5-position on the Pt-electrode in 0.1 M TBAHFP + MeCN in the potential range from −2 V to 2 V. The mechanism of electrode processes is discussed. It is shown that a chemical step is involved in irreversible electrochemical processes. The effect of the substituent at the C5-position on reduction and oxidation potentials is also noted. The regions of a linear dependence of the current peak on the concentration of the compounds examined are determined. The text was submitted by the authors in English.     

Base-mediated reaction of vinyl bromides with aryl azides: one-pot synthesis of 1,5-disubstituted 1,2,3-triazoles

A one-pot base-mediated reaction of azides and β- or α-vinyl bromides has been reported. The effects of bases and solvents have been investigated in the process. A variety of 1,5-disubstituted triazoles were prepared in low to good yields. Further studies reveal that the corresponding alkynes were produced as intermediates via elimination reaction. Under the same reaction conditions, the reactions of alkyl alkynes with phenyl azide would give 1,5-disubstituted 1,2,3-triazoles.     

Synthesis of trans-perhydroisoquinolines by 6-endo-trig radical cyclization of amino-tethered vinyl bromides and cyclohexenes

Bu₃SnH-promoted cyclization of several N-(2-bromoprop-2-enyl)-N-[(4-oxocyclohex-1-enyl)methyl]alkylamines is reported. It has been found that the generated vinyl radicals evolve through a 6-endo-cyclization pathway giving rise to the corresponding 4,6-functionalized perhydroisoquinolines in a prevalent trans-relative configuration.     

Nucleophilic Functionalization of 2-Alkylidene-4-Oxothiazolidines at C(5)-Position Induced by Formation of Novel Pyridinium Salt

Abstract

The synthesis of unsubstituted pyridinium salt containing the 4-oxothiazolidine moiety bondedviaC(5) to the N position of the pyridine nucleus is reported. The nucleophilic displacement of pyridine from pyridinium salt by the selected nucleophiles leads to the formation of new 5-substituted 4-oxothiazolidines in good yields.     

Copper-catalyzed tandem reaction of 2-bromobenzyl bromides with 1,3-dicarbonyl compounds leading to 4H-chromenes

A Cu(Ⅰ)-catalyzed one-pot tandem reaction of 2-bromobenzyl bromides with 1,3-dicarbonyl compounds leading to 4H-chromene derivatives has been developed.This new approach toward 4H-chromenes combines several reactions in one pot and builds molecular complexity from readily available starting materials.     

Regioselective synthesis of highly-substituted biaryls by reaction of vinyl malononitriles with acetylenic esters

The one-pot procedure for synthesis of highly-substituted biaryl derivatives has been described via cyclocondensation reaction between vinyl malononitriles and acetylenic esters. A series of complex biaryls containing one-donor and three-acceptor moieties was obtained with good yields.     

Transformations of 3-aryl-2-chloro-2-imidoylaziridines: novel entries to 4-chloro-2,5-diaryl-1H-imidazoles and 2-chloro-2-acylaziridines

The reactivity of stereochemically defined 3-aryl-2-chloro-2-imidoylaziridines, an unexplored class of substituted aziridines, was investigated under various reaction conditions. 2-Chloro-2-imidoylaziridines underwent a novel thermal rearrangement by reflux in acetonitrile via C-C bond cleavage to 4-chloro-2,5-diarylimidazoles in high yield. Alternatively, a novel efficient entry toward 2-aroyl-2-chloroaziridines was based on the chemoselective hydrolysis of 2-chloro-2-imidoylaziridines with hydrochloric acid in aqueous tetrahydrofuran.     

Coupling reactions of aryl bromides with 1-alkynols catalysed by a tetraphosphine/palladium catalyst

cis,cis,cis-1,2,3,4-Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C₃H₅)]₂ system catalyses efficiently the coupling reactions of aryl halides with a variety of alkynols such as propargyl alcohol, but-1-yn-4-ol, pent-1-yn-5-ol or hex-1-yn-6-ol. The catalyst can be used at low loading. Higher reaction rates were observed in the presence of but-1-yn-4-ol, pent-1-yn-5-ol or hex-1-yn-6-ol than with propargyl alcohol. The protection of the alcohol functions as an ether or a silyloxy group led generally to similar or better results than the reactions performed with the unprotected alcohols.     

Structure, configuration, conformation and quantification of the push-pull effect of 2-alkylidene-4-thiazolidinones and 2-alkylidene-4,5-fused bicyclic thiazolidine derivatives

Structures of a series of push-pull 2-alkylidene-4-thiazolidinones and 2-alkylidene-4,5-fused bicyclic thiazolidine derivatives were optimized at the B3LYP/6-31G(d) level of theory in the gas phase and discussed with respect to configurational and conformational stability. Employing the GIAO method, ¹³C NMR chemical shifts of the C-2, C-2′, C-4 and C-5 atoms were calculated at the same level of theory in the gas phase and with inclusion of solvent, and compared with experimental data. Push-pull effect of all compounds was quantified by means of the quotient π^∗/π, length of the partial double bond, ¹³C NMR chemical shift difference (Δδ_CC) and ¹H NMR chemical shifts of olefinic protons. The effect of bromine on donating and accepting ability of other substituents of the push-pull CC double bond is discussed, too.     

Structures and thermodynamic stabilities of the C2H4O isomers: Acetaldehyde,vinyl alcohol and ethylene oxide

Ab initio molecular orbital theory with a sequence of basis sets ranging from minimal to triple zeta plus polarization and with electron correlation incorporated using Möller-Plesset perturbation theory terminated at third order (MP3) is used to examine the structures and relative energies of the C₂H₄O isomers, acetaldehyde, vinyl alcohol and ethylene oxide. Acetaldehyde is indicated to be the most stable isomer with vinyl alcohol lying 45 kJ mol^–1 and ethylene oxide 114 kJ mol^–1 higher in energy. The theoretical structures and energies are in reasonable agreement with the best available experimental data.     

Regio- and stereoselective synthesis of highly functionalized vinyl ethers via coiodination of acetylenic ketones

A Cu(OTf)₂-catalyzed highly regio- and stereoselective coiodination of acetylenic ketones was reported, providing a mild and convenient method for the synthesis of (Z)-β-carbonyl-β-iodoenol ethers in good yields.     

松香树脂酸乙烯酯的研究 第二报:松香树脂酸乙烯酯组成与结构的研究

本文研究了国产特级松香树脂酸乙烯酯的组成与各级分的分子结构：结果表明国产特级松香树脂酸乙烯酯的主要成分是枞酸乙烯酯、长叶松酸乙烯酯和去氢枞酸乙烯酯，三者间重量比为11：3：2；其连接在羧基上的乙烯基在核磁共振谱图中呈现为很好的ABX系统。     

气相色谱-串联质谱法测定2-氰基溴苄中3-氰基溴苄和4-氰基溴苄的含量

建立了气相色谱-串联质谱法测定苯甲酸阿格列汀关键起始物料2-氰基溴苄中基因毒性杂质3-氰基溴苄和4-氰基溴苄含量的分析方法。采用50%苯基-50%二甲基聚硅氧烷为固定液的VF-17MS毛细管柱(30m×0.25mm,0.25μm)进行程序升温;进样口温度260℃;以多反应监测(MRM)模式检测。2种待测物均具有较好的线性关系,相关系数均大于0.998 0;检出限(3S/N)均为2.0μg·L^-1;3-氰基溴苄的回收率为92.1%~97.0%;4-氰基溴苄的回收率为102%~109%;供试品溶液、杂质对照品溶液和系统适用性溶液在室温(25℃)下放置18h内稳定。三批生产规模样品中均未检出3-氰基溴苄和4-氰基溴苄。建立的分析方法灵敏度高、分离度好、结果准确,可有效分离并测定2-氰基溴苄中的3-氰基溴苄和4-氰基溴苄含量,为苯甲酸阿格列汀的安全性提供了保障。     

1-(4-磺酸基苯基)-3-[4-(苯基偶氮)苯基]-三氮烯与季铵盐型阳离子表面活性剂的显色反应及应用

合成了１－（４－磺酸基苯基）－３－［４－（苯基偶氮）苯基］－三氮烯（ＳＰＡＰＴ）,研究了该试剂在强碱性介质中与季铵盐型阳离子表面活性剂溴化十六烷基吡啶（ＣＰＢ）和溴化十六烷基三甲铵（ＣＴＭＡＢ）的显色反应体系,试剂与表面活性剂形成１∶３的紫红色离子缔合物,其表观摩尔吸光系数分别为１．６７×１０４和１．０６×１０４Ｌ·ｍｏｌ－１·ｃｍ－１。测定了显色体系中ＣＰＢ和ＣＴＭＡＢ的临界胶束浓度（ＣＭＣ）,证明在比尔定律范围内,ＣＰＢ和ＣＴＭＡＢ均以单分子缔合显色。确定了显色体系最佳实验条件     

高立体选择性地合成薄荷基溴和新薄荷基溴

薄荷基溴和新薄荷基溴是一类非常有用的不对称合成中间体。以L-薄荷醇为原料,通过与不同的溴化剂反应高立体选择性地得到薄荷基溴和和新薄荷基溴。当L-薄荷醇与盐酸和无水溴化锌反应时高立体选择性地得到薄荷基溴,当L-薄荷醇与三溴化磷反应时高立体选择性地得到新薄荷基溴.     

季胺盐型表面活性剂与镉试剂显色反应的研究及应用

在三乙醇胺存在下，季铵盐型表面活性剂溴化十六烷基三甲铵，溴化十二烷基二甲基苄铵和溴化十六烷基吡啶分别与１－（４－硝基苯基）－３－「４－苯基偶氮）苯基」－三氮烯形成离子缔合物显色，吸收光谱红移，离子缔合物；ＮＰ－ＰＡＰＴ与ＤＤＭＢＡＢ来１：２与ＣＴＭＡＢ，ＣＰＢ均为１：３；测定了显色体系的ＣＴＭＡＢ，ＤＤＭＢＡＭ，ＣＰＢ的临界胶束浓度，符合比尔定律的范围，表观摩尔吸光系数δｍａｘ，探讨了微量ＣＴＭＡ     

Facile,efficient synthesis of polyfunctionalized 2-aminoimidazoles via vinyl azides and cyanamide

A simple and direct synthesis of 2-aminoimidazoles from vinyl azides and cyanamide was developed. An attractive feature of this protocol is that the desired products are generated in a highly efficient and eco-friendly manner without the use of a catalyst. A plausible mechanism has been proposed.