Mechanochemical synthesis of rutile-type CrMO4 (M=V, Sb) and their solid solutions

Grinding a mixture of hydrous amorphous chromium oxide (Cr₂O₃·nH₂O), vanadium oxide (V₂O₅) and antimony oxide (Sb₂O₅) was conducted by using a planetary ball mill, to investigate their mechanochemical reactions to form chromium vanadium oxide (CrVO₄) and chromium antimony oxide (CrSbO₄). The synthesis reactions proceed with an increase in grinding periods of time. The ground samples consist of agglomerates with particle size of about ten nanometers. The synthesized CrVO₄ sample exhibits a rutile-type tetragonal crystal structure, which is a high pressure phase. Additionally, solid solutions, CrV_1−xSb_xO₄ (x=0∼1, Δx=0.25), have been synthesized mechanochemically from the mixtures of Cr₂O₃·nH₂O, V₂O₅ and Sb₂O₅.     

Synthesis of 5-substituted 2-(4- or 3-methoxyphenyl)-4(1H)-quinolones

5-Substituted 7-methoxy-2-(4- or 3-methoxyphenyl)-4(1H)-quinolones 8-17 have been synthesised in good yields from the corresponding 7-methoxy-2-(4- or 3-methoxyphenyl)-5-trifluoromethanesulfonate-4(1H)-quinolones 7 via palladium-mediated cross-coupling reactions or aromatic nucleophilic substitution (SN_Ar) reactions.     

Highly regio- and stereocontrolled brominations of gem-difluorinated vinyloxiranes

gem-Difluorinated vinyloxiranes, which are useful synthetic intermediates for difluorinated compounds, were brominated regio- and stereoselectively. Introduction of bromide at the allylic epoxide carbon with inversion of stereochemistry was realized by MgBr₂·Et₂O to furnish an anti vic-bromohydrine, whereas the reaction with LiBr/AcOH afforded the other diastereomer selectively. Moreover, both reactions at high temperature allowed to obtain, the thermodynamically favored products, E-allylic alcohols dominantly.     

N,N,N′,N′-Tetrakis(2-hydroxyethyl)ethylenediamine palladium(II) complex as efficient catalyst for the Suzuki/Miyaura reaction in water

A new water soluble palladium(II) complex (2) derived from N,N,N′,N′-tetrakis(2-hydroxyethyl)ethylenediamine (edteH₄) (1) was synthesized in high yield and characterized by ¹H, ¹³C, HMQC and COSY NMR spectroscopy. X-ray diffraction studies on a single crystal of 2 confirmed the cis square planar geometry; the edteH₄ ligand (1) is κ² (N,N)-coordinated with four pendant CH₂CH₂OH groups. This new complex [PdCl₂(edteH₄)] (2) and the previously synthesized triethanolamine complex [Pd(OCH₂CH₂N(CH₂CH₂OH)₂)₂] (3) were tested as catalysts for the Suzuki/Miyaura cross-coupling reaction of various aryl bromides with phenylboronic acid in water. Electronically activated aryl bromides, such as 4-bromoacetophenone and 4-bromobenzaldehyde undergo the cross-coupling with extremely high turnover numbers (TON) of up to 1,00,000 without organic solvent.     

Concise synthesis of trans- and cis-3,4-disubstituted piperidines based on regio- and stereoselective allylation of cyclopentenyl esters

3,4-Disubstituted piperidines were synthesized through anti S_N2′ allylation of 4-substituted 2-cyclopentenyl esters with reagents based on RMgX and CuX, thus allowing equal access to both trans- and cis-isomers. As an application, the paroxetine intermediate was synthesized efficiently. During the investigation, the MeOCH₂CO₂ group was found to show high reactivity in the pivotal anti S_N2′ type reaction using the reagent derived from (i-PrO)Me₂SiCH₂MgCl and CuCN.     

Electrophilic monofluoromethylation of O-, S-, and N-nucleophiles with chlorofluoromethane

CH₂ClF has been found to be a useful electrophilic monofluoromethylating agent for a variety of O-, S-, and N-nucleophiles. The reaction is not sensitive to the radical scavenger such as nitrobenzene, which strongly supports an S_N2 mechanism rather than an SET mechanism. Although most of these products (fluoromethyl ethers, sulfides, and amines) can be isolated with good purity, some of these compounds do intend to decompose (via defluorination) during storage. The electrophilic monofluoromethylation of carbon-nucleophiles was attempted with CH₂ClF, CH₂FI, or FCH₂OTs as monofluoromethylating agents, but with no success.     

The effect of element substitution on high-temperature thermoelectric properties of Ca3Co2O6 compounds

Polycrystalline Ca₃Co_1.8M_0.2O₆ (M=Mn, Fe, Co, Ni, Cu) and Ca_2.7Na_0.3Co₂O₆ were synthesized by solid-state reaction to evaluate the effect of substitution on the thermoelectric properties of Ca₃Co₂O₆. Substitution by Mn, Cu and Na appears to increase carrier density, given that electrical resistivity (ρ) and the Seebeck coefficient (S) were simultaneously reduced. Conversely, Fe substitution seems to reduce carrier density, resulting in a simultaneous increase in S and ρ. Cu and Na substitution resulted in a significant decrease in ρ due to enhancement of grain size and grain boundary connectivity, which could have a strong impact on ρ. Not only the intrinsic substitution effect on the electronic state but also this modification of the microstructure plays an important role in improvement of the thermoelectric power factor, particularly in the case of the Na-substituted sample.     

Effects of stereochemistry and β-substituents on the rates of vinylic SN2 reaction of hypervalent vinyl(phenyl)-λ-iodanes with tetrabutylammonium halides

Both stereoisomers of β-(2-phenylethoxy)vinyl-λ³-iodane and (Z)-β-aroyloxyvinyl-λ³-iodane were prepared stereoselectively. These substituted vinyl-λ³-iodanes undergo nucleophilic vinylic substitutions with n-Bu₄NX (X=Cl, Br, I) under mild conditions, yielding vinyl halides. The observed inversion of configuration at the ipso vinylic carbon atom is compatible with a concerted vinylic S_N2 mechanism. Kinetic measurements indicated that the rates for vinylic S_N2 reaction of (Z)-vinyl-λ³-iodane are greater than those of the E-isomer, probably because of the higher ground state energy of the Z-isomer. Electronic effects of β-substituents of vinyl-λ³-iodanes in the vinylic S_N2 reaction are also discussed.     

Synthesis and phase transition of Li-Mn-O spinels with high Li/Mn ratio by thermo-decomposition of LiMnC2O4(Ac)

LiMnC₂O₄(Ac) precursor in which Li⁺ and Mn²⁺ were amalgamated in one molecule was prepared by solid-state reaction at room-temperature using manganese acetate, lithium hydroxide and oxalic acid as raw materials. By thermo-decomposition of LiMnC₂O₄(Ac) at various temperatures, a series of Li_1+y[Mn_2−xLi_x]_16dO₄ spinels were prepared with Li₂MnO₃ as impurities. The structure and phase transition of these spinels were investigated by XRD, TG/DTA, average oxidation state of Mn and cyclic voltammeric techniques. Results revealed that the Li-Mn-O spinels with high Li/Mn ratio were unstable at high temperature, and the phase transition was associated with the transfer of Li⁺ from octahedral 16c sites to 16d sites. With the sintering temperature increasing from 450 to 850 °C, the phase structure varied from lithiated-spinel Li₂Mn₂O₄ to Li₄Mn₅O₁₂-like to LiMn₂O₄-like and finally to rock-salt LiMnO₂-like. A way of determining x with average oxidation state of Mn and the content of Li₂MnO₃ was also demonstrated.     

Highly regio- and stereocontrolled SN2′ reactions of gem-difluorinated vinyloxiranes with monoalkylcopper reagents

Reaction of gem-difluorinated vinyloxiranes with RCu(X)Li allowed us to introduce the R group regioselectively at the fluorine-attached terminal carbon atom in an S_N2′ manner to afford (E)-allylic alcohols exclusively, while homoallylic alcohols with anti stereochemical relationship were found to be obtained selectively from higher-ordered cuprates derived from CuCl and RMgBr in a ratio of 1:3.     

Efficient modification of steroid 20S-hydroxy functionality for industrial preparation of 1α,25-dihydroxy-22-oxavitamin D3, Maxacalcitol

A one-pot modification method of steroid 20S-hydroxy functionality involving sequential alkylation and reductive cleavage of epoxy bond has been established for the industrial preparation of a medicinally important 1α,25-dihydroxy-22-oxa-vitamin D₃2 (22-oxa-calcitriol), Maxacalcitol.     

The reaction of biphenyl radical anion and dianion with alkyl fluorides. From ET to SN2 reaction pathways and synthetic applications

The reaction of dilithium biphenyl (Li₂C₁₂H₁₀) with alkyl fluorides has been studied from the point of view of the distribution of products. Two main reaction pathways, the nucleophilic substitution (S_N2) and the electron transfer (ET), can compete to yield the same alkylation products in what is known as the S_N2-ET dichotomy. S_N2 seems to be the main mechanism operating with primary alkyl fluorides (n-RF). Alkylation proceeds in good yields, and the resulting alkylated dihydrobiphenyl anion (n-RC₁₂H₁₀Li) can be trapped with a second conventional electrophile (E⁺) affording synthetically interesting dearomatized biphenyl derivatives (n-RC₁₂H₁₀E). The reaction gives a higher amount of ET products as we move to secondary (s-RF) and to tertiary alkyl fluorides (t-RF), in which case the mechanism seems to be dominated by ET. In this case, alkylation by radical coupling is still feasible, giving access to the synthesis of t-RC₁₂H₁₀E, although in lower yields. A rational interpretation of this S_N2-ET dichotomy is given on the basis of the full distribution of products observed when 5-hexenyl fluoride and 1,1-dimethyl-5-hexenyl fluoride were are used as radical probes in their reaction with Li₂C₁₂H₁₀ and LiC₁₂H₁₀.     

Hydrogenation of CO2 Promoted by Silicon-Activated H2S: Origin and Implications

Unlike the usual method of CO_x (x = 1, 2) hydrogenation using H₂ directly, H₂S and HSiSH (silicon-activated H₂S) were selected as alternative hydrogen sources in this study for the CO_x hydrogenation reactions. Our results suggest that it is kinetically infeasible for hydrogen in the form of H₂S to transfer to CO_x at low temperatures. However, when HSiSH is employed instead, the title reaction can be achieved. For this approach, the activation of CO₂ is initiated by its interaction with the HSiSH molecule, a reactive species with both a hydridic H^δ− and protonic H^δ+. These active hydrogens are responsible for the successive C-end and O-end activations of CO₂ and hence the final product (HCOOH). This finding represents a good example of an indirect hydrogen source used in CO₂ hydrogenation through reactivity tuned by silicon incorporation, and thus the underlying mechanism will be valuable for the design of similar reactions.     

High resolution and in situ neutron powder diffraction study of the crystal structure and the stability of Ba4CaCu3O8+δ

The crystal structure and stability of Ba₄CaCu₃O_8+δ have been investigated by neutron powder diffraction, differential thermal analysis and thermogravimetry. It is found that the phase is not stable below 1065 K in p(O₂)=1 bar and decomposes according to the eutectoid reaction Ba₄CaCu₃O_8+δ+x O₂⇒Ba₂CuO_3.4+CaO+2BaCuO₂. However, the equilibrium with the outer gas is not reached for sintered ceramics so that Ba₄CaCu₃O_8+δ can be obtained in a metastable state after normal cooling conditions. In this case, the crystal structure is cubic (Im-3m, , δ=0.68, Z=2, R_wp=2.5%, R_Bragg=5.4%) as reported in the literature. In reduced oxygen partial pressure (p(O₂)<10⁻⁶ bar), Ba₄CaCu₃O_8+δ is stable down to room temperature and has a tetragonal structure with a significant lower oxygen content (P4/mmm, , , δ=-0.81, Z=2, R_wp=2.8%, R_Bragg=5.1%). The difference between the two crystal structures is discussed in terms of oxygen content, copper formal valence and cation coordination. The influence of the oxygen pressure on the stability of Ba₄CaCu₃O_8+δ is also discussed.     

DFT and ab initio theoretical study for the CF3S + CO reaction

The potential energy surface for the reaction of CF₃S with CO is calculated at the G4//B3LYP/6-311++G(d,p) level of theory. The results show that F-abstraction and addition-elimination mechanisms are involved, and the latter one is dominant thermodynamically and kinetically. The dominant channel is the reactant addition to form CF₃SCO, and then decomposes to CF₃ + OCS. While the direct F-abstraction channel and CF₃SCO isomerization channel are not significant for the title reaction due to higher barriers involved. The comparisons among four reactions of CX₃Y + CO (X = H, F; and Y = O, S) are made to imply the similar and different properties and reactivities of the same family elements and the F- and S-substituted derivatives.     

A new promising phosphor, Na3La2(BO3)3:Ln (Ln=Eu, Tb)

We present an efficient way to search a host for ultraviolet (UV) phosphor from UV nonlinear optical (NLO) materials. With the guidance, Na₃La₂(BO₃)₃ (NLBO), as a promising NLO material with a broad transparency range and high damage threshold, was adopted as a host material for the first time. The lanthanide ions (Tb³⁺ and Eu³⁺)-doped NLBO phosphors have been synthesized by solid-state reaction. Luminescent properties of the Ln-doped (Ln=Tb³⁺, Eu³⁺) sodium lanthanum borate were investigated under UV ray excitation. The emission spectrum was employed to probe the local environments of Eu³⁺ ions in NLBO crystal. For red phosphor, NLBO:Eu, the measured dominating emission peak was at 613 nm, which is attributed to ⁵D₀-⁷F₂ transition of Eu³⁺. The luminescence indicates that the local symmetry of Eu³⁺ in NLBO crystal lattice has no inversion center. Optimum Eu³⁺ concentration of NLBO:Eu³⁺ under UV excitation with 395 nm wavelength is about 30 mol%. The green phosphor, NLBO:Tb, showed bright green emission at 543 with 252 nm excited light. The measured concentration quenching curve demonstrated that the maximum concentration of Tb³⁺ in NLBO was about 20%. The luminescence mechanism of Ln-doped NLBO (Tb³⁺ and Eu³⁺) was analyzed. The relative high quenching concentration was also discussed.     

Synthesis and tunable thermal expansion property of Al2−δScδW3O12

A series of solid solutions of Al_2−δSc_δW₃O₁₂ (δ = 0-2) were successfully synthesized by the solid-state reaction with aluminum oxide, scandium oxide and tungsten trioxide as raw materials. The phase composition and structure of the products were analyzed by X-ray powder diffraction and scanning electron microscopy, while the linear thermal expansion coefficients were measured by thermo dilatometer. The results indicate that Al_2−δSc_δW₃O₁₂ with high purity can be successfully prepared by the solid-state method. All samples of different δ values crystallize in the same orthorhombic structure with space group of Pnca. The lattice constants and cell volume increase linearly with increasing Sc content. The average linear thermal expansion coefficients of Al_2−δSc_δW₃O₁₂ measured by thermo dilatometer indicate that the thermal expansion coefficients of the solid solutions could be adjusted to the desired values, such as positive, near zero or negative by simply changing the δ value.     

The first successful intermolecular Heck reaction of Baylis-Hillman adducts: synthesis of β-aryl substituted Baylis-Hillman adducts

The first successful intermolecular Heck reaction between Baylis-Hillman adducts and aryl iodides was achieved under the conditions comprising Pd(OAc)₂/n-Bu₄NBr/KOAc in CH₃CN.     

New mixed-valence chromium structure type: NH4Cr(CrO4)2

Synthesis and crystal structure of a new structure type of mixed Cr(III)/Cr(VI) chromates is reported. NH₄Cr(CrO₄)₂ was prepared from CrO₃ in the presence of (NH₄)₂Ce(NO₃)₆. Since this is the first preparation of mixed valence ternary chromium oxides from aqueous solution, a reaction pathway for this synthesis is suggested. The crystal structure of NH₄Cr(CrO₄)₂ has been determined from three-dimensional X-ray data collected at low temperature, 173 K. The structure belongs to the orthorhombic space group Pnma, with a=14.5206(10), b=5.4826(4), and Z=4. The title compound consists of corner-sharing chromium(III) octahedra and chromium(VI) tetrahedra forming a three-dimensional network with the composition [Cr(CrO₄)₂]_n^n-, containing channels in which zigzag rows of ammonium ions balance the net charge.     

Sensitively electrochemical detection of the DNA damage in situ by electro-Fenton reaction based on Fe@Fe2O3 core-shell nanonecklace and multi-walled carbon nanotube composite

An electrochemical biosensor for mimicking the metal-mediated DNA damage pathway in situ was presented. The Fenton reagents (H₂O₂ and iron ion) for the DNA damage were generated in situ with a constant rate from the sensing film. H₂O₂ and iron ion reacted further together to yield hydroxyl radical, which attacked DNA in the film. These courses of DNA damage were just like those happened in organism. The DNA damage was detected by monitoring the differential pulse voltammetric response of an electrochemical indicator, Co(phen)₃³⁺. Another electrochemical indicator, Ru(NH₃)₆³⁺, was also used for monitoring the DNA damage as a complementary means and the minimal detectable amount of DNA damage was 0.16 μg. The biosensor had good reproducibility. After this biosensor was used for 11 times, 90% of the first detection signal was obtained.