Palladium catalyzed atom-efficient cross-coupling reactions of triarylbismuths with aryl bromides

Aryl bromides (3 equiv) were coupled efficiently with triarylbismuths (1 equiv) in an atom-efficient way using the Pd(OAc)₂/PPh₃ catalytic system in the presence of K₃PO₄ as base in DMF at 90 °C, providing excellent yields of the cross-coupled biaryls in short reaction times.     

Sonogashira coupling with aqueous ammonia directed to the synthesis of azotolane derivatives

Sonogashira coupling with aqueous ammonia is tolerable for the reaction of aryl iodides or terminal alkynes bearing an azobenzene group. The reaction of (4-heptyloxyphenyl)ethyne with (4-heptyloxyphenyl)-(4-iodophenyl)diazene in the presence of 1 mol% of PdCl₂(PPh₃)₂, 2 mol% of CuI, and 2 equiv of 0.5 M aqueous ammonia gives the corresponding azotolane in 87% isolated yield after stirring at room temperature for 15 h.     

Palladium catalyzed atom-efficient cross-coupling reactions of triarylbismuths with aryl iodides and aryl triflates

The atom-efficient cross-coupling of triarylbismuths with aryl iodides or aryl triflates using catalytic Pd(OAc)₂/PPh₃ and K₃PO₄ as base in DMF at 90 °C to afford the corresponding functionalized biaryls in high yields is reported.     

An atom-efficient palladium-catalyzed cross-coupling reaction of triarylbismuths with acid chlorides: synthesis of diaryl and alkyl aryl ketones

The cross-coupling reaction of triarylbismuths with acid chlorides using a catalytic amount of PdCl₂/PPh₃ afforded the corresponding ketones in high yields. The reactions of aromatic and aliphatic acid chlorides occurred with atom efficiency, as 3 equiv of acid chlorides coupled effectively with 1 equiv of triarylbismuths to yield 3 equiv of the corresponding diaryl and alkyl aryl ketones.     

Copper-catalyzed cross-coupling of aryl iodides and aryl acetylenes using microwave heating

An efficient copper-catalyzed cross-coupling of aryl iodides with aryl acetylenes under microwave irradiation is described. The reaction proceeds under microwave heating with 10 mol % CuI and 2 equiv Cs₂CO₃ in 43-87% yields.     

Palladium-catalyzed homocoupling of aryl halides in the presence of fluoride

This report describes the fluoride-mediated homocoupling of aryl iodides and bromides catalyzed by palladium(0). This coupling protocol is tolerant of electron-donating and electron-withdrawing substitutents on the aryl halide, as well as ortho substitution. Optimum reaction conditions entail 10 mol% Pd(dba)₂, 3 equiv of tetrabutyl ammonium fluoride (TBAF) in DMF at 90 °C.     

A palladium catalyzed atom-efficient cross-coupling reactivity of triarylbismuths with α,β-unsaturated acyl chlorides

An atom-efficient cross-coupling reactivity of triarylbismuths (1 equiv) was demonstrated by cross-coupling reaction with 3 equiv of α,β-unsaturated acyl chlorides under palladium catalysis in the synthesis of a series of functionalized α, β-unsaturated ketones in high isolated yields.     

Simultaneous reduction of nitro- to amino-group in the palladium-catalyzed Suzuki cross-coupling reaction

An efficient method for palladium-catalyzed Suzuki cross-coupling reaction with simultaneous reduction of nitro- to amino-group has been developed. This method allows nitro-substituted aryl halides to readily react with arylboronic acids, to afford aryl substituted aniline in low to excellent yields. The reaction was catalyzed by Pd(OAc)₂ (3 mol %) at 150 °C under atmospheric pressure in the presence of K₂CO₃ (3 equiv) in DMF/H₂O (5/1).     

One-pot synthesis of 1,4-diarylsubstituted 1,3-diynes from the sequential coupling reactions of aryl iodides and propiolic acid

1,4-Disubstituted 1,3-dialkynes were obtained from the one-pot palladium/copper-catalyzed coupling reactions of aryl iodide and propiolic acid. The optimized catalytic system consisted of 5.0 mol % Pd(PPh₃)₂Cl₂, 10 mol % dppb, 10 mol % CuI, 2.4 equiv of DBU, and 1.2 equiv of K₂CO₃. The coupling reaction was carried out at 30 °C for 6 h and subsequently at 80 °C for 3 h.     

Synthesis of α-aminonitriles under mild catalytic,metal-free conditions

α-Aminonitriles have been synthesized by a Strecker synthesis from aldehydes and ketones under mild catalytic, metal-free conditions. Aromatic aldehydes (1 equiv) were reacted with aromatic and 1° or 2° aliphatic amines (1 equiv) in EtOH containing 3 mol % of NH₄Cl to give high yields of α-aminonitriles. An alternative to adding NH₄Cl as a catalyst involved the use of excess TMSCN (1 equiv) and to promote the process. The reaction was also successful under microwave conditions using excess TMSCN with no solvent. Ketones similarly reacted with aromatic amines and excess TMSCN under conventional and microwave heating, but 30 mol % of added NH₄Cl was required for optimum conversion.     

Efficient trapping of the intermediates in the photooxygenation of sulfides by aryl selenides and selenoxides

Aryl selenides and selenoxides trap efficiently the intermediates in the reaction of singlet oxygen with sulfides. In the co-photooxygenation of 1 equiv of an aryl selenoxide with 1.3 equiv of dimethyl sulfide, the aryl selenone is formed quantitatively. Aryl selenides require 4-5 equiv of sulfide for their complete co-oxidation to selenones.     

gem-Difluoropropargylation of aldehydes using cat. In/Zn in aqueous media

Zn (0.9 equiv) in combination with catalytic amounts of In (0.1 equiv) and I₂ (0.1 equiv) was found to effect the reaction of several difluoropropargyl bromide derivatives with aldehydes to produce gem-difluorohomopropargyl alcohols in aqueous media under conditions suitable for large scale applications.     

Highly enantioselective addition of linear alkyl alkynes to linear aldehydes

It is discovered that the use of biscyclohexylamine (Cy₂NH) as an additive can greatly enhance the enantioselectivity for the reaction of linear alkyl alkynes with linear aldehydes. The combination of (S)-BINOL (20 mol %), Cy₂NH (5 mol %), ZnEt₂ (2 equiv), and Ti(OⁱPr)₄ (0.5 equiv) catalyzes the reaction at room temperature in diethyl ether solution with 81-89% ee and 57-77% yield.     

Deprotonation of thiophenes using lithium magnesates

Thiophene was regioselectively deprotonated at C2 on treatment with 1/3 equiv of Bu₃MgLi in THF at room temperature. The lithium arylmagnesate formed was either trapped with electrophiles or cross-coupled in a ‘one-pot’ procedure with aryl halides under palladium catalysis. 2-Chlorothiophene and 2-methoxythiophene were similarly deprotonated at C5 under the same reaction conditions. The enhancement of the reactivity of the base using TMEDA was evidenced using ¹H NMR spectroscopy.     

[PdCl2{8-(di-tert-butylphosphinooxy)quinoline)}]: a highly efficient catalyst for Suzuki-Miyaura reaction

The complex [PdCl₂(P-N)] containing the basic and sterically demanding 8-(di-tert-butylphosphinooxy)quinoline ligand (P-N) is a highly efficient catalyst for the coupling of phenylboronic acid with aryl bromides or aryl chlorides. The influence of solvent and base has been investigated, the highest rates being observed at 110 °C in toluene with K₂CO₃ as the base. With aryl bromides the reaction rates are almost independent on the electronic properties of the para aryl substituents, on the contrary, reduced reaction rates are observed when bulky substituents are present on the substrate. Nevertheless the coupling of 2-bromo-1,3,5-trimethylbenzene with phenylboronic acid can be carried out to completion in 2 h using a catalyst loading of 0.02 mol %. Under optimized reaction conditions, turnover frequencies as high as 1900 h⁻¹ can be obtained in the coupling of 4-chloroacetophenone with phenylboronic acid; lower reaction rates are obtained with substrates bearing EDG substituents on the aryl group.     

Triaryl phosphine-functionalized N-heterocyclic carbene ligands for Heck reaction

A new type of triaryl phosphine-functionalized imidazolium salts 6 were prepared. Their palladium complexes, generated in situ, were successfully applied in the palladium-catalyzed Heck reaction. Using 1 mol% of Pd(dba)₂ and 1 mol% 6c in the presence of 2 equiv of K₂CO₃ in DMAc has proven to be highly efficient for the coupling of a wide array of aryl bromides and iodides with acrylates in excellent yield. The coupling of 4-bromotoluene with various styrene derivatives catalyzed by Pd/6c complex also gave good results.     

A simple method for the oxidation of α-amino acid esters to α-oximino esters

Magnesium bis(monoperoxyphthalate) hexahydrate (MMPP) was found to be an effective reagent for the oxidation of various α-amino acid esters to the corresponding α-oximino acid esters. This transformation could be completed under mild conditions within 2.5 h using 1.1 equiv of MMPP in THF. Clean oximino esters were obtained after quenching and extracting the reaction from sodium thiosulfate solution. The O-phosphorylated derivative of 2-oximinoglutarate exhibited slow binding inhibitory potency for the metallopeptidase prostate-specific membrane antigen (PSMA) with an IC₅₀ value of 58 nM.     

Microwave-assisted cycloadditions of 2-alkynylbenzonitriles with sodium azide: selective synthesis of tetrazolo[5,1-a]pyridines and 4,5-disubstituted-2H-1,2,3-triazoles

Under microwave irradiation (75 W), treatment of 2-alkynylbenzonitriles with 1.5 equiv of sodium azide in DMSO at 140 °C gave 4,5-disubstituted-2H-1,2,3-triazoles in 60-99% yields. Additionally, adding 8 equiv of ZnBr₂ and using 8 equiv of sodium azide in DMF at 100 °C lead to the formation of tetrazolo[5,1-a]isoquinolines up to 87% yield.     

Catalytic activity of η-(olefin)palladium(0) complexes with iminophosphine ligands in the Suzuki-Miyaura reaction. Role of the olefin in the catalyst stabilization

The catalytic activity of η²-(olefin)palladium(0)(iminophosphine) complexes in the Suzuki-Miyaura coupling is strongly dependent on the reaction conditions and on the nature of the ligands. The reaction is at the best carried out in aromatic solvents in the presence of K₂CO₃ at 90-110 °C. Higher reaction rates are obtained when the R substituent on the N-imino group is an aromatic group of low steric hindrance and the olefin is a moderate π-accepting ligand such as dimethyl fumarate. At temperatures lower than 90 °C, a self-catalyzed process leading to catalyst deactivation becomes predominant. Preliminary mechanistic investigations indicate that the oxidative addition of the aryl bromide to a Pd(0) species is the rate determining step in the catalytic cycle and that the olefin plays a key role in catalyst stabilization. Systems in situ prepared by mixing Pd(OAc)₂ or Pd(dba)₂ with 1 equiv of iminophosphine appear substantially less active than the preformed catalysts.     

Deprotonation of chloropyridines using lithium magnesates

4-Chloropyridine was deprotonated on treatment with 1/3 equiv of the highly coordinated magnesate Bu₃(TMP)MgLi₂ in THF at −10 °C, as evidenced by trapping with I₂. The use of Bu(TMP)₂MgLi in Et₂O allowed the reaction of 2-chloropyridine, giving the 3-functionalized derivative as the main product. Mixtures of 3- and 4-functionalized derivatives were obtained when 2,6-dichloropyridine was involved in the reaction. Performing the reaction on 3-chloropyridine with lithium magnesates in THF, either the 4,4′-dimer or the 4-iodo derivative was formed after quenching by I₂, the former using 1/3 equiv of Bu₂(TMP)MgLi and the latter using 1 equiv of (TMP)₃MgLi. Similar results were observed with 3,5-dichloropyridine, 2,5-dichloropyridine and 3-chloro-2-fluoropyridine. 1,2-Migration of the lithium arylmagnesate formed by deprotonation was proposed to justify the dimers formation.