Investigations by (13)C NMR spectroscopy of ethene-initiated catalytic CO hydrogenation

13C NMR spectroscopy shows that the n-alkene and n-alkane products from the catalytic hydrogenation of CO in the presence of (13)C(2)H(4) probes over Ru/150 degrees C, Co/180 degrees C, Fe/220 degrees C, or Rh/190 degrees C (1 atm, CO:H(2) 1:1, "mild conditions") contain terminal (13)CH(3)(13)CH(2)- units. This is consistent with their formation by a regiospecific polymerization of C(1) species derived from CO and initiated by (13)C(2)H(4). Although the activities toward individual products differed somewhat, similar distributions and similar product labeling patterns were obtained over all the four catalysts. 1-Butene and the higher 1-n-alkenes from all the catalysts were largely (13)CH(3)(13)CH(2)(CH(2))(n)()CH=CH(2) (n = 0-3), propene formed over Ru or Co was (13)CH(3)(13)CH=CH(2), while both (13)CH(3)(13)CH=CH(2) and (13)CH(2)=(13)CHCH(3) were formed over Fe or Rh. Comparison of the conclusions from these probe experiments with those from isotope transient experiments by other workers indicates that the ethene initiator does not significantly modify the course of the CO hydrogenation. The reaction products are largely kinetically determined, and the primary products are mainly linear 1-n-alkenes, while the n-alkanes and 2-n-alkenes largely arise via secondary processes. Since the distribution of products and the labeling in them is so similar, it is concluded that one basic primary mechanism applies over all the four metals. Several different reaction paths involving a polymerization of surface methylene, [CH(2(ad))], have been proposed. Although the predictions based on several of these mechanisms agree with many of the results, the alkenyl + [CH(2(ad))] mechanism, initiated by a surface vinyl [CH(2)=CH((ad))], most easily accommodates the experimental evidence. An alternative path involving sequential addition of surface methylidyne and hydride either to a growing alkylidene chain (alkylidene + [CH(ad) + H(ad)]) or to an alkyl chain (alkyl + [CH((ad)) + H(ad)]) has recently been proposed by van Santen and Ciobica. The [CH(2(ad))] mechanism offers an easier explanation for the formation of the various alkenes, the distribution of products, and of the initiation, while the [CH(ad) + H(ad)] mechanism can explain any n-alkanes formed as primary products and not derived from alkenes. At higher reaction temperatures over Ru and Co, considerable (13)C(1) incorporation (from natural abundance in the CO and from cleavage of the (13)C(2)H(4) probe) was found in all the hydrocarbons. Thus, at higher temperatures (13)C(1(ad)) in addition to (13)C(2(ad)) species participate in both chain growth and initiation. In summary, adsorbed CO is transformed very easily into surface C(1(ad)), probably [CH(2(ad))] in equilibrium with [CH((ad))+H(ad)], which act as the propagating species.     

Synthesis, characterization and ethylene reactivity of 2-diphenylphosphanylbenzamido nickel complexes

Addition of primary amines to N-[2-(diphenylphosphanyl)benzoyloxy]succinimide affords 2-diphenylphosphanylbenzamides, Ph2PC6H4C(O)NHR (R = C(CH3)3, 3; R = H, 4; R = CH2CH2CH3, 5; R = CH(CH3)2, 6). Addition of NiCl(eta3-CH2C6H5)(PMe3) to the deprotonated potassium salts of the amides and subsequent treatment of two equivalents of B(C6F5)3 to the resulting products furnishes eta3-benzyl zwitterionic nickel(II) complexes, [Ph2PC6H4C(O)NR-kappa2N,P]Ni(eta3-CH2C6H5) (R = C6H5, 9; R = C(CH3)3, 10; R = H, 11; R = CH2CH2CH3, 12; R = CH(CH3)2, 13). Solid structures of 9, 11, 13 and the intermediate eta1-benzyl nickel(II) complexes, [Ph2PC6H4C(O)NR-kappa2N,P]Ni(eta1-CH2C6H5)(PMe3) (R = C6H5, 7; R = C(CH3)3, 8) were determined by X-ray crystallography. When ethylene is added to the eta3-benzyl zwitterionic nickel(II) complexes, butene is obtained by the complexes 9-12 but complex 13 provides very high molecular-weight branched polyethylene (Mw, approximately 1300000) with excellent activity (up to 5200 kg mol-1 h-1 at 100 psi gauge).     

High-precision isotopic ratio measurement system for methane (12CH3D/12CH4,13CH4/12CH4) by using near-infrared diode laser absorption spectroscopy

We demonstrate that the absorption spectroscopic method can be applied to a precise deltaD (an index of 12CH3D/12CH4) and delta13C (an index of 13CH4/12CH4) analysis for methane samples of natural isotopic abundance. We chose an appropriate absorption line pair whose absorption coefficients have nearly the same temperature dependences so as to minimize the temperature effect in absorbance ratio measurements. We measured 12CH3D/12CH4 ratio by using near-infrared external cavity diode lasers and a new type multi-pass cell. The deltaD value can be determined from the 12CH3D/12CH4 signal-intensity ratio with a fine correction by taking account of the interference of 13CH4 lines. Similarly, the delta13C value is determined from the 13CH4/12CH4 signal-intensity ratio, which is measured by using distributed-feedback laser and a modified Herriot-type cell and corrected for the abundance of 12CH3D. The precision was +/-0.7 and +/-0.027/1000 for deltaD and delta13C, respectively.     

Chain epimerization during propylene polymerization with metallocene catalysts: mechanistic studies using a doubly labeled propylene

The mechanisms of chain epimerization during propylene polymerization with methylaluminoxane-activated rac-(EBTHI)ZrCl(2) and rac-(EBI)ZrCl(2) catalysts (EBTHI = ethylenebis(eta(5)-tetrahydroindenyl); EBI = ethylenebis(eta(5)-indenyl)) have been studied using specifically isotopically labeled propylene: CH(2)=CD(13)CH(3). These isospecific catalysts provide predominantly the expected [mmmm] pentads with [minus signCH(2)CD(13)CH(3)(-)] repeating units ((13)C NMR). Under relatively low propylene concentrations at 50 and 75 degreesC, where stereoerrors attributable to chain epimerization are prevalent, (13)C NMR spectra reveal (13)C-labeled methylene groups along the polymer main chain, together with [CD(13)CH(3)] units in [mmmr], [mmrr], and [mrrm] pentads and [CH(13)CH(3)] units in [mmmmmm] and [mmmmmr] heptads, as well as [mrrm] pentads. The isotopomeric regiomisplacements and stereoerrors are consistent with a mechanism involving beta-D elimination, olefin rotation and enantiofacial interconversions, and insertion to a tertiary alkyl intermediate [Zr-C(CH(2)D)((13)CH(3))P] (P = polymer chain), followed by the reverse steps to yield two stereoisomers of [Zr-CHDCH((13)CH(3))P] and [Zr-(13)CH(2)CH(CH(2)D)P], as well as unrearranged [Zr-CH(2)CD((13)CH(3))P]. The absence of observable [-CH(2)CH(13)CH(2)D-] in the [mrrm] pentad region of the (13)C NMR spectra provides evidence that an allyl/dihydrogen complex does not mediate chain epimerization.     

A selective unsaturated hydrocarbon subtraction technique for stable carbon isotopic analysis of atmospheric methyl chloride, methyl bromide, and C2-C5 saturated hydrocarbons using continuous-flow isotope ratio mass spectrometry

Using continuous-flow isotope ratio mass spectrometry, we have developed a new analytical system which enables us to determine the stable carbon isotopic composition of CH3Cl, CH3Br, and C2-C5 saturated hydrocarbons in gas samples even if they contain substantial amounts of unsaturated hydrocarbons, using an I2O5 reagent for their selective subtraction. The analytical precision of the delta13C determinations is better than 0.5 per thousand for >300 pmolC injections and better than 5 per thousand for 20 pmolC injections. Using the system, delta13C values for CH3Cl and CH3Br were found in burning exhaust that contain a substantial quantity of unsaturated hydrocarbons. CH3Cl and CH3Br measured in exhaust from burning rice plants exhibit highly 13C-depleted values of -56.6 +/- 1.3 per thousand and -48.6 +/- 3.9 per thousand, respectively, while saturated hydrocarbons exhibit delta13C values (-26.4 to -28.9 per thousand) that are comparable with the total delta13C value of the parent material (rice plant; -28.0 per thousand). Using the system, we can determine the delta13C values of methyl halides and hydrocarbons in many kinds of gas samples.     

High-resolution solid-state (13)C NMR studies of chemisorbed organometallics. Chemisorptive formation of cation-like and alkylidene organotantalum complexes on high surface area inorganic oxides

(13)C CPMAS NMR spectroscopy has been employed to investigate the surface chemistry of the organotantalum hydrocarbyl/alkylidene complexes, Cp'Ta((13)CH(3))(4) (1*), Cp(2)Ta((13)CH(3))(3) (2*), Cp(2)Ta((13)CH(2))((13)CH(3)) (3*), and Ta((13)CH(t)Bu)((13)CH(2)(t)Bu)(3) (4*) [Cp' = eta(5)-(CH(3))(5)C(5), Cp = eta(5)-C(5)H(5)] supported on partially dehydroxylated silica (PDS), dehydroxylated silica (DS), or dehydroxylated gamma-alumina (DA). Mono-Cp tantalum hydrocarbyl 1* undergoes chemisorption to form Cp'Ta((13)CH(3))(3)O-Si mu-oxo species on silica, and "cation-like" Cp'Ta((13)CH(3))(3)(+) and Cp'Ta((13)CH(3))(3)O-Al mu-oxo species on DA, via pathways analogous to those established for organo-group 4 and actinide complexes. When supported on DA, bis-Cp tantalum hydrocarbyl 2* follows the same chemisorption mode as 1*. However, when 2* is chemisorbed on PDS and DS, a "cation-like" Cp(2)Ta((13)CH(3))(2)(+) species is the major adsorbate product. On PDS, bis-Cp tantalum alkylidene complex 3* is converted predominantly to a stable "cation-like" Cp(2)Ta((13)CH(3))(2)(+) species, presumably via electrophilic addition of a proton from the PDS surface. In contrast to 3*, Ta alkylidene complex 4* forms predominantly a Ta((13)CH(t)Bu)((13)CH(2)(t)Bu)(2)O-Si, mu-oxo-alkylidene species on PDS.     

Characterization of covalent linkages in organically functionalized MCM-41 mesoporous materials by solid-state NMR and theoretical calculations

The covalent linkages formed during functionalization of MCM-41 mesoporous molecular sieves with five chloroalkylsilanes ((EtO)3Si(CH2Cl), (MeO)3Si(CH2CH2CH2Cl), Cl3Si(CH2CH2CH3), Cl2Si(CH3)(CH2Cl) and Cl2Si(CH3)2) have been investigated using high-resolution solid-state NMR spectroscopy and DFT calculations. Structural information was obtained from 1H-13C and 1H-29Si heteronuclear (HETCOR) NMR spectra, in which high resolution in the 1H dimension was obtained by using fast MAS. The 1H-13C HETCOR results provided the assignments of 1H and 13C resonances associated with the surface functional groups. Sensitivity-enhanced 1H-29Si HETCOR spectra, acquired using Carr-Purcell-Meiboom-Gill refocusing during data acquisition, revealed the identity of 29Si sites (Qn, Tn, and Dn) and the location of functional groups relative to these sites. Optimal geometries of local environments representing the Qn, Tn and Dn resonances were calculated using molecular mechanics and ab initio methods. Subsequently, DFT calculations of 29Si, 13C, and 1H chemical shifts were performed using Gaussian 03 at the B3LYP/6-311++G(2d,2p) level. The theoretical calculations are in excellent accord with the experimental chemical shifts. This work illustrates that state-of-the-art spectroscopic and theoretical tools can be used jointly to refine the complex structures of inorganic-organic hybrid materials.     

Experimental and theoretical study of~(13)C shielding tensors in new-style molybdenum complex

~~Experimental and theoretical study of~(13)C shielding tensors in new-style molybdenum complex~~     

Synthesis, structure, and reactivity of 13-vertex carboranes and 14-vertex metallacarboranes

Syntheses, properties, and synthetic applications of 13-vertex closo- and nido-carboranes are reported. Reactions of the nido-carborane salt [(CH2)3C2B10H10]Na2 with dihaloborane reagents afforded 13-vertex closo-carboranes 1,2-(CH2)3-3-R-1,2-C2B11H10 (R = H (2), Ph (3), Z-EtCH=C(Et) (4), E-(t)BuCH=CH (5)). Treatment of the arachno-carborane salt [(CH2)3C2B10H10]Li4 with HBBr2.SMe2 gave both the 13-vertex carborane 2 and a 14-vertex closo-carborane (CH2)3C2B12H12 (8). On the other hand, the reaction of [C6H4(CH2)2C2B10H10]Li4 with HBBr2.SMe2 generated only a 13-vertex closo-carborane 1,2-C6H4(CH2)2-1,2-C2B11H11 (9). Electrophilic substitution reactions of 2 with excess MeI, Br2, or I2 in the presence of a catalytic amount of AlCl3 produced the hexa-substituted 13-vertex carboranes 8,9,10,11,12,13-X6-1,2-(CH2)3-1,2-C2B11H5 (X = Me (10), Br (11), I (12)). The halogenated products 11 and 12 displayed unexpected instability toward moisture. The 13-vertex closo-carboranes were readily reduced by groups 1 and 2 metals. Accordingly, several 13-vertex nido-carborane dianionic salts [nido-1,2-(CH2)3-1,2-C2B11H11][Li2(DME)2(THF)2] (13), [[nido-1,2-(CH2)3-1,2-C2B11H11][Na2(THF)4]]n (13a), [[nido-1,2-(CH2)3-3-Ph-1,2-C2B11H10][Na2(THF)4]]n (14), [[nido-1,2-C6H4(CH2)2-1,2-C2B11H11][Na2(THF)4]]n (15), and [nido-1,2-(CH2)3-1,2-C2B11H11][M(THF)5] (M = Mg (16), Ca (17)) were prepared in good yields. These carbon-atom-adjacent nido-carboranes were not further reduced to the corresponding arachno species by lithium metal. On the other hand, like other nido-carborane dianions, they were useful synthons for the production of super-carboranes and supra-icosahedral metallacarboranes. Interactions of 13a with HBBr2.SMe2, (dppe)NiCl2, and (dppen)NiCl2 gave the 14-vertex carborane 8 and nickelacarboranes [eta5-(CH2)3C2B11H11]Ni(dppe) (18) and [eta5-(CH2)3C2B11H11]Ni(dppen) (19), respectively. All complexes were fully characterized by various spectroscopic techniques and elemental analyses. Some were further confirmed by single-crystal X-ray diffraction studies.     

Continuous flow stable isotope methods for study of delta(13)C fractionation during halomethane production and degradation

Gas chromatography/mass spectrometry/isotope ratio mass spectrometry (GC/MS/IRMS) methods for delta(13)C measurement of the halomethanes CH(3)Cl, CH(3)Br, CH(3)I and methanethiol (CH(3)SH) during studies of their biological production, biological degradation, and abiotic reactions are presented. Optimisation of gas chromatographic parameters allowed the identification and quantification of CO(2), O(2), CH(3)Cl, CH(3)Br, CH(3)I and CH(3)SH from a single sample, and also the concurrent measurement of delta(13)C for each of the halomethanes and methanethiol. Precision of delta(13)C measurements for halomethane standards decreased (+/-0.3, +/-0.5 and +/-1.3 per thousand) with increasing mass (CH(3)Cl, CH(3)Br, CH(3)I, respectively). Given that carbon isotope effects during biological production, biological degradation and some chemical (abiotic) reactions can be as much as 100 per thousand, stable isotope analysis offers a precise method to study the global sources and sinks of these halogenated compounds that are of considerable importance to our understanding of stratospheric ozone destruction.     

Microwave investigation of the CO-CH4 van der Waals complex

Rotational spectra of eight isotopomers of the weakly bound van der Waals complex CO-CH4 were recorded in the frequency range from 4 to 19 GHz using a pulsed molecular beam Fourier transform microwave spectrometer. For the isotopomers containing methane monomers of Td symmetry, namely, 12C16O-12CH4, 12C16O-13CH4, 12C16O-12CD4, 13C16O-12CH4, and 13C18O-12CH4, three rotational progressions were observed that correlate to the jm=0, 1, and 2 rotational levels of free methane. For those containing partially deuterated methane monomers with C3V symmetry, namely, 12C16O-12CH3D and 12C16O-12CHD3, only two progressions were recorded, correlating to the jk=0(0) and 1(1) rotational levels of free CH3D and CHD3, respectively. The van der Waals bond distance R, intermolecular stretching frequency nus, and the corresponding stretching force constant ks were derived from the obtained spectroscopic results. The results obtained for the jm=0 ground state are compared to the previous infrared and millimeter wave data. A 17O nuclear quadrupole coupling constant was determined from the resolved hyperfine structure of 13C17O-12CH4 and was used to obtain angular information about the carbon monoxide subunit. A Coriolis interaction was deduced from the irregular spectral pattern involving levels with jm=1. Qualitative information about the extent of the perturbation was obtained from a comparison of spectroscopic constants of different isotopomers.     

Interstellar molecule CCCN may be formed by charge-stripping of [CCCN]- in the gas phase, and when energized, undergoes loss of C with partial carbon scrambling

Deprotonation of CH2=CHCN with HO- in the chemical ionization source of a VG ZAB 2HF mass spectrometer gives CH2=-CCN which fragments through [H- (HCCCN)] to give [CCCN]-. Similar reactions with 13CH2CHCN and CH2CH13CN give [13CCCN]- and [CC13CN]-. Collision induced dissociations of these anions, together with calculations at the CCSD(T)/aug-cc-pVDZ//B3LYP/6-31+G(d) level of theory indicate that the anions do not rearrange under conditions used to charge strip them to their neutrals. A comparison of the charge reversal (-CR+) and neutralization/reionization (-NR+) mass spectra of [CCCN]- indicate that neutral C3N species (formed by charge stripping of the anion) decompose by loss of C. Experimental studies with the 13C labeled analogues indicate that the loss of C occurs subsequent to or accompanying partial carbon scrambling of the CCCN backbone. Theoretical studies suggest that this scrambling may occur during equilibration of CCCN and CCNC via a decomposing "rhombic" C3N intermediate.     

Perturbation of conjugation in allylic lithium compounds due to stereochemical control of internal lithium coordination: crystallography, NMR, and calculational studies

Several allylic lithium compounds have been prepared with ligands tethered at C(2). These are with (CH(3)OCH(2)CH(2))(2)NCH(2)-, 6, 1-TMS 5, 1,3-bis(TMS) 8, and 1,1,3-tris(TMS) 9. Allylic lithiums with (CH(3)OCH(2)CH(2))(2)NCH(2)C(CH(3))(2)-, are 10, 1-TMS 11, and 1,3-bis(TMS), 12 compounds with -C(CH(3))(2)CH(2)N-((S)-(2-methoxymethyl)-pyrrolidino) at C(2) 13, 1-TMS 14, and 1,3-bis(TMS) 15. In the solid state, 8-10 and 12 are monomers, 6 and 13 are Li-bridged dimers, and 5 and 7 are polymers. In solution (NMR data), 5, 7-12, 14, and 15 are monmeric, and 6 is a dimer. All samples show lithium to be closest to one of the terminal allyl carbons in the crystal structures and to exhibit one-bond (13)C-(7)Li or (13)C(1)-(7)Li spin coupling, for the former typically ca. 3 Hz and for the latter 6-8 Hz. In every structure, the C(1)-C(2) allyl bond is longer than the C(2)-C(3) bond, and both lie between those for solvated delocalized and unsolvated localized allylic lithium compounds, respectively, as is also the case for the terminal allyl (13)C NMR shifts. Lithium lies 40-70 degrees off the axis perpendicular to the allyl plane at C(1). These effects are variable, so the trend is that the differences between the C(1)-C(2) and C(2)-C(3) bond lengths, (13)delta(3)-(13)delta(1) values, and the (13)C(1)-(7)Li or (13)C-(6)Li coupling constants all increase with decreasing values of the torsional angle that C(1)-Li makes with respect to the allyl plane.     

Direct observation of a 14-electron ruthenacyclobutane relevant to olefin metathesis

The 14-electron ruthenium phosphonium alkylidene complex [(IH2Mes)Cl2Ru=CH(PCy3)][B(C6F5)4], 1b, a highly active olefin metathesis catalyst, reacts with stoichiometric quantities of ethylene at -50 degrees C in CD2Cl2 to generate the ruthenacyclobutane complex [(IH2Mes)Cl2RuCH2CH2CH2], 2, and [CH2=CH(PCy3)][B(C6F5)4] in quantitative yield by NMR spectroscopy. 1H and 13C NMR spectroscopies on 2 and 2-13C3 are consistent with a symmetrical C2v structure, providing the first experimental information concerning this crucial intermediate in ruthenium-mediated olefin metathesis. At -50 degrees C, exchange with free ethylene takes place on the chemical time scale. Complex 2 decomposes in solution upon warming to room temperature, generating propene and unknown ruthenium product(s).     

Perturbation of conjugation in internally solvated allylic lithium compounds: variation of ligand structure. NMR and X-ray crystallography

Several allyic lithium compounds were prepared with different potential ligands tethered at C2. These are with CH3OCH2CH2NCH3CH2-, 5 and 1-TMS 6, with (CH3)2NCH2CH2NCH3CH2-, 1-TMS 7, and with ((CH3)2NCH2CH2)2NCH2-, 8 and 1-TMS 9. In all these compounds Li is fully coordinated to the pendant ligand and is sited off the axis perpendicular to the allyl plane at one of the allyl termini as indicated by a combination of X-ray crystallography and NMR spectra. Compounds 5 and 8 are Li-bridged dimers as shown by X-ray crystallography and also dimeric in benzene solution as determined from freezing point determinations. Compounds 6, 7, and 9 are monomeric in THF-d8 or diethyl ether-d10 solution and exhibit one bond 13C1, 6Li scalar coupling at low temperature. Taken together the crystallographic and NMR data indicate that all of these compounds incorporate partially delocalized allylic moieties. Compounds 5 and 8 undergo fast 1,3-Li-sigmatropic shifts that are proposed to take place within low concentrations of monomers in fast equilibrium with prevalent dimers. Averaging with increasing temperature of the one-bond 13C, 6Li coupling constant in 6, 7, and 13 provided the dynamics of bimolecular C-Li exchange with Delta H++ values of 6.7, 12, and 13 kcal x mol(-1), respectively. Averaging of the diastereotopic N(CH3)2 13C resonances of 7 is indicative of fast transfer of coordinated ligand between faces of the allyl plane Delta H++ = 5.3 kcal x mol(-1) combined with slower inversion at nitrogen. Compound 8 exhibits similar effects. It is concluded that variation of the ligand structure changes dynamic behavior of the compounds but has little influence of their degrees of delocalization.     

Synthesis,spectroscopy, and catalytic properties of cationic organozirconium adsorbates on "super acidic" sulfated alumina. "Single-site" heterogeneous catalysts with virtually 100 active sites

Sulfated alumina (AlS), a highly Br?nsted acidic sulfated metal oxide, is prepared by the impregnation of gamma-alumina with 1.6 M H(2)SO(4), followed by calcination at 550 degrees C for 3 h. (13)C CPMAS NMR spectroscopy of the chemisorbed (13)C(alpha)-enriched organozirconium hydrocarbyl Cp'(2)Zr((13)CH(3))(2) (2)/AlS (Cp' = eta(5)-(CH(3))(5)C(5)) reveals that the chemisorption process involves M[bond]C sigma-bond protonolysis at the strong surface Br?nsted acid surface sites to yield a "cation-like" highly reactive zirconocenium electrophile, Cp'(2)Zr(13)CH(3)(+). In contrast, chemisorption of 2 on dehydroxylated alumina (DA) yields a similar cation via methide transfer to surface Lewis acid sites, while chemisorption onto dehydroxylated silica yields a mu-oxo Cp'(2)Zr((13)CH(3))-OSi[triple bond] species. Two complementary active site kinetic assays for benzene hydrogenation show that, unlike typical heterogeneous and supported organometallic catalysts, 97 +/- 2% of all Cp'ZrMe(3) (3)/AlS sites are catalytically significant, demonstrating that the species identified by (13)C CPMAS NMR is indeed the active species. 3/AlS mediates benzene hydrogenation with a turnover frequency of 360 h(-1) at 25 degrees C/1.0 atm H(2). Active site assays were also conducted for ethylene polymerization and reveal that 87 +/- 3% of 3/AlS sites are catalytically active, again demonstrating that nearly all zirconium sites are catalytically significant. Relative rates of ethylene homopolymerization mediated by the catalysts prepared via Cp(2)Zr(CH(3))(2) (1), Cp'(2)Zr(CH(3))(2) (2), Cp'Zr(CH(3))(3) (3), Zr(CH(2)TMS)(4) (4), and Zr(CH(2)Ph)(4) (5) (Cp = eta(5)-C(5)H(5)) chemisorption on AlS are 5/AlS > or = 4/AlS > or = 3/AlS > 2/AlS > or = 1/AlS for ethylene homopolymerization at 150 psi C(2)H(4), 60 degrees C. Under identical conditions, the polymerization rate for 3/DA is approximately 1/10th that for 3/AlS.     

Metal-ligand-coordinated vesicles and vesicle-assisted preparation of calcium oxalate

A Ca(2+) -ligand-coordinated vesicle phase was prepared from a mixture of tetradecyldimethylamine oxide (C14DMAO) and calcium tetradecylamidomethyl sulfate [(CH3(CH2)13NHCOCH2OSO3)2Ca] in aqueous solution. At the appropriate mixing ratios, Ca(2+) -ligand coordination results in the formation of molecular bilayers because Ca(2+) can firmly bind to the head groups of C14DMAO and (CH3(CH2)13NHCOCH2OSO3)2Ca by complexation which reduces the area of head group. In this system, no counterions in aqueous solution exist because of the Ca(2+) -ligand coordination, and the bilayer membranes are not shielded by salts, i.e., a salt-free but charged molecular bilayer. The structures of the birefringent solutions of (CH3(CH2)13NHCOCH2OSO3)2Ca and C14DMAO mixtures were determined by transmission electron microscopy (TEM) images and rheological measurements, demonstrating that the birefringent sample solutions consist of vesicles. The Ca(2+) -ligand complex vesicle phase was used as a microreactor to prepare calcium oxalate (CaC2O4) crystals. Dimethyl oxalate, as a precursor, can hydrolyze to oxalic acid and methanol. Oxalic acid should precipitate Ca(2+) ions binding to the head groups of C14DMAO and (CH3(CH2)13NHCOCH2OSO3)2Ca to produce CaC2O4 crystals (Ca(2+) + H2C2O4 --> CaC2O4 (downward arrow) + 2H+). The obtained particles were CaC2O4 monohydrate, which were dominated by (020) faces. CaC2O4 precipitates were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared (FT-IR) analysis. After removal of CaC2O4 precipitates, a new cationic and anionic (catanionic) vesicle phase was constructed through electrostatic interaction between cationic C14DMAOH+ (C14DMAO + H+ --> C14DMAOH+) and anionic CH3(CH12)13 NHCOCH2OSO3-.     

Ionic-liquid-promoted decaborane dehydrogenative alkyne-insertion reactions: a new route to o-carboranes

Unlike in conventional organic solvents, where Lewis base catalysts are required, decaborane dehydrogenative alkyne-insertion reactions proceed rapidly in biphasic ionic-liquid/toluene mixtures with a wide variety of terminal and internal alkynes, thus providing efficient, one-step routes to functional o-carborane 1-R-1,2-C2B10H11 and 1-R-2-R'-1,2-C2B10H10 derivatives, including R = C6H5- (1), C6H13- (2), HC[triple bond]C-(CH2)5- (3), (1-C2B10H11)-(CH2)5- (4), CH3CH2C(O)OCH2- (5), (C2H5)2NCH2- (6), NC-(CH2)3- (7), 3-HC[triple bond]C-C6H4- (8), (1-C2B10H11)-1,3-C6H4- (9), HC[triple bond]C-CH2-O-CH2- (10); R,R' = C2H5- (11); R = HOCH2-, R' = CH3- (12); R = BrCH2-; R' = CH3- (13); R = H2C=C(CH3)-, R' = C2H5- (14). The best results were obtained from reactions with only catalytic amounts of bmimCl (1-butyl-3-methylimidazolium chloride), where in many cases reaction times of less than 20 min were required. The experimental data for these reactions, the results observed for the reactions of B10H13(-) salts with alkynes, and the computational studies reported in the third paper in this series all support a reaction sequence involving (1) the initial ionic liquid promoted formation of the B10H13(-) anion, (2) addition of B10H13(-) to the alkyne to form an arachno-R,R'-C2B10H13(-) anion, and (3) protonation of arachno-R,R'-C2B10H13(-) to form the final neutral 1-R-2-R'-1,2-C2B10H10 product with loss of hydrogen.     

正已醇-邻、间、对二甲苯二元系固液相平衡

Melting temperatures have been measured and the solid-liquid phase diagrams constructed for 1-hexanol＋o-xylene, 1-hexanol＋m-xylene and 1-hexanol＋p-xylene. They are simple eutectic systems. Excess mole Gibbs free energies were calculated at 298.15K, showing larger positive deviations from ideal-solution behavior. The largest values of GmE are 711、 650 and 800 J•mol-1 for {o-C6H4(CH3)2＋C6H13OH}、 {m-C6H4(CH3)2 ＋ C6H13OH} and {p-C6H4(CH3)2＋C6H13OH} respectively.     

C-F or C-H bond activation and C-C coupling reactions of fluorinated pyridines at rhodium: synthesis, structure and reactivity of a variety of tetrafluoropyridyl complexes

Reactions of [RhH(PEt3)3] (1) or [RhH(PEt3)4] (2) with pentafluoropyridine or 2,3,5,6-tetrafluoropyridine afford the activation product [Rh(4-C5NF4)(PEt3)3] (3). Treatment of 3 with CO, 13CO or CNtBu effects the formation of trans-[Rh(4-C5NF4)(CO)(PEt3)2] (4a), trans-[Rh(4-C5NF4)(13CO)(PEt3)2] (4b) and trans-[Rh(4-C5NF4)(CNtBu)(PEt3)2] (5). The rhodium(III) compounds trans-[RhI(CH3)(4-C5NF4)(PEt3)2] (6a) and trans-[RhI(13CH3)(4-C5NF4)(PEt3)2] (6b) are accessible on reaction of 3 with CH3I or 13CH3I. In the presence of CO or 13CO these complexes convert into trans-[RhI(CH3)(4-C5NF4)(CO)(PEt3)2] (7a), trans-[RhI(13CH3)(4-C5NF4)(CO)(PEt3)2] (7b) and trans-[RhI(13CH3)(4-C5NF4)(13CO)(PEt3)2] (7c). The trans arrangement of the carbonyl and methyl ligand in 7a-7c has been confirmed by the 13C-13C coupling constant in the 13C NMR spectrum of 7c. A reaction of 4a or 4b with CH3I or 13CH3I yields the acyl compounds trans-[RhI(COCH3)(4-C5NF4)(PEt3)2] (8a) and trans-[RhI(13CO13CH3)(4-C5NF4)(PEt3)2] (8b), respectively. Complex 8a slowly reacts with more CH3I to give [PEt3Me][Rh(I)2(COCH3)(4-C5NF4)(PEt3)](9). On heating a solution of 7a, the complex trans-[RhI(CO)(PEt3)2] (10) and the C-C coupled product 4-methyltetrafluoropyridine (11) have been obtained. Complex 8a also forms 10 at elevated temperatures in the presence of CO together with the new ketone 4-acetyltetrafluoropyridine (12). The structures of the complexes 3, 4a, 5, 6a, 8a and 9 have been determined by X-ray crystallography. 19F-1H HMQC NMR solution spectra of 6a and 8a reveal a close contact of the methyl groups in the phosphine to the methyl or acyl ligand bound at rhodium.