Simple one-step synthesis of 3,4-dimethoxythiophene and its conversion into 3,4-ethylenedioxythiophene (EDOT)

3,4-Dimethoxythiophene (2) was synthesized in one-step from readily available bulk chemicals via a ring closure reaction, and was then trans-etherified with ethylene glycol to give 3,4-ethylenedioxythiophene (3) (EDOT).     

Oligothienylenevinylenes incorporating 3,4-ethylenedioxythiophene (EDOT) units

A new series of π-conjugated oligomers based on various combinations of thiophene and EDOT units and double bonds has been synthesized by Wittig-Horner reactions from phosphonate anions carrying EDOT or bis-EDOT units. Optical and electrochemical results evidence the crucial role of the EDOT moiety for modulating the electronic properties of the oligomers. The insertion of bis-EDOT unit in the middle of the molecule leads to a self-rigidification of the conjugated system due to non covalent S?O intramolecular interactions. The strong electron donor effect of the EDOT units explains the determining role of the relative position of the EDOT units on the localization and stabilization of the positive charges in the radical cation or dication states.     

Synthesis of large ring 3,4-alkylenedioxythiophenes (ADOT) derivatives via Mitsunobu reaction

Poly(3,4-ethylenedioxythiophene) (PEDOT) stands out for its optimized conductivity, stability, and high degree of transparency which has led to its successful commercialization. These excellent properties of PEDOT are mostly ascribed to the alkylenedioxy bridge across the 3- and 4-positions, and thus much effort has been dedicated to synthesizing 3,4-ethylenedioxythiophene (EDOT) analogs. However, only few homologous compounds were successfully synthesized, such as 3,4-propylenedioxythiophene (PrDOT) or 3,4-(1,4-butylenedioxy)thiophene (BuDOT). In this Letter, we use Mitsunobu reaction to synthesize a series of 3,4-alkylenedioxythiophenes (ADOTs) derivatives with 8- to 16-membered rings. The eight-membered compounds were obtained in high or excellent yield. We also found that the 9- to 16-membered EDOT analogs were obtained in relatively low yield because of the competitive reaction to make dimers. Our method provides an easy way to modify ethylenedioxythiophenes (EDOTs), and these obtained ADOTs compounds are promising building blocks for the synthesis of functional π-conjugated systems used in material chemistry.     

含3,4-乙撑二氧取代基的聚三噻吩衍生物的合成与表征

通过Stille反应合成了3,′4′-乙撑二-氧2,2′∶5,′2″-三噻吩,并以其作为单体,在0~5℃下,以FeCl3为氧化剂,在氯仿溶液中合成了3种聚(3,′4′-乙撑二氧-2,2′∶5,′2″-三噻吩)。并采用紫外-可见光谱(UV-Vis)、傅里叶红外光谱(FT-IR)、凝胶色谱(GPC)、循环伏安(CV)、透射电镜(TEM)和热重分析(TGA)对聚合物进行了表征。同时讨论了乙撑二氧取代基和FeCl3用量对聚合物性质的影响。结果表明:聚合物的紫外最大吸收为466~474 nm,数均分子量为3.4×103~3.6×103,能隙大约为2.05 eV,热分解温度为110℃。     

Intermolecular cyclocondensation reaction of 3,4-dihydropyrimidine-2-thione under the Mitsunobu reaction conditions

A self-intermolecular cyclocondensation reaction of 3,4-dihydropyrimidine-2-thione(DHPM) to give a novel tricyclic structure containing DHPM core in the presence of diethyl azodicarboxylate(DEAD) and triphenylphosphine(TPP) at room temperature is reported.     

Efficient, mild, parallel and purification-free synthesis of aryl ethers via the Mitsunobu reaction

A wide range of commercial diazodicarboxylates and phosphines were screened in an attempt to find purification-free conditions for application in parallel synthesis. The combination of immobilized triphenylphosphine and TMAD proved to be suitable for the synthesis of aryl ethers via the Mitsunobu reaction. Nine ethers were synthesized in good yield and excellent purity, the purification being limited to a filtration step.     

Synthesis and electropolymerization of a perylenebisimide-functionalized 3,4-ethylenedioxythiophene (EDOT) derivative

[reaction: see text] We have developed a convenient and straightforward procedure for the preparation of functionalized 3,4-ethylenedioxythiophene (EDOT) systems by using a new chloromethyl-EDOT derivative as a versatile synthon. Based on this procedure, novel suitably functionalized perylenetetracarboxylic diimide (PDI) dye derivatives covalently linked to 3,4-ethylenedioxythiophene moieties have been synthesized and electrochemically polymerized to yield a donor-acceptor PEDOT derivative with an enhanced absorption cross-section.     

3,4-Ethylenedioxythiophene (EDOT)-based π-conjugated oligomers: Facile synthesis and excited-state properties

A facile synthetic method to produce soluble 3,4-ethylenedioxythiophene (EDOT) oligomers was developed by using iron (III) nitrate nonahydrate as the oxidizing reagent. Two EDOT oligomers, i.e. octomers and octodecamers were obtained as the major products. Their UV–vis absorption, fluorescence at room temperature and 77 K, and triplet transient difference absorption have been measured in CH₂Cl₂ solutions or glassy solutions. With increased conjugation length from EDOT octomers (A) to EDOT octodecamers (B), the UV–vis absorption, fluorescence and the triplet transient difference absorption band shift to longer wavelength. Both the oligomers also exhibit reasonably high efficiency to generate singlet oxygen.     

Utilizing 3,4-ethylenedioxythiophene(EDOT)-bridged non-fullerene acceptors for efficient organic solar cells

A rational design of efficient low-band-gap non-fullerene acceptors(NFAs)for high-performance organic solar cells(OSCs)remains challenging;the main constraint being the decrease in the energy level of the lowest unoccupied molecular orbitals(LUMOs)as the bandgap of A-D-A-type NFAs decrease.Therefore,the short current density(J_sc)and open-circuit voltage(V_oc)result in a trade-off relationship,making it difficult to obtain efficient OSCs.Herein,three NFAs(IFL-ED-4 F,IDT-ED-4 F,and IDTT-ED-2 F)were synthesized to address the above-mentioned issue by introducing 3,4-ethylenedioxythiophene(EDOT)as aπ-bridge.These NFAs exhibit relatively low bandgaps(1.67,1.42,and 1.49 eV,respectively)and upshifted LUMO levels(-3.88,-3.84,and-3.81 eV,respectively)compared with most reported low-band-gap NFAs.Consequently,the photovoltaic devices based on IDT-ED-4 F blended with a PBDB-T donor polymer showed the best power conversion efficiency(PCE)of 10.4%with a high J_sc of 22.1 mA cm^-2 and Voc of 0.884 V among the examined NFAs.In contrast,IDTT-ED-4 F,which was designed with an asymmetric structure of the D-p-A type,showed the lowest efficiency of 1.5%owing to the poor morphology and charge transport properties of the binary blend.However,when this was introduced as the third component of the PM6:BTP-BO-4 Cl,complementary absorption and cascade energy-level alignment between the two substances could be achieved.Surprisingly,the IDTT-ED-4 F-based ternary blend device not only improved the Jscand Voc,but also achieved a PCE of 15.2%,which is approximately 5.3%higher than that of the reference device with a minimized energy loss of 0.488 eV.In addition,the universality of IDTT-ED-2 F as a third component was effectively demonstrated in other photoactive systems,specifically,PM6:BTPe C9 and PTB7-Th:IEICO-4 F.This work facilitates a better understanding of the structure–property relationship for utilizing efficient EDOT-bridged NFAs in high-performance OSC applications.     

Solid-phase synthesis of 2-imidazolidinethiones via Mitsunobu reaction of N-(2-hydroxyethyl)thioureas

This letter reports the solid-phase synthesis of 2-imidazolidinethiones via the N-cyclization of N-(2-hydroxyethyl)thioureas using the Mitsunobu reaction in good yield and purity. This process employed the reductive amination of an ArgoGel-MB-CHO resin to anchor the aminoalcohols, followed by a reaction with isothiocyanates to give the resin-attached N-(2-hydroxyethyl)thioureas. Cleavage of the 2-imidazolidinethiones was performed with trifluoroacetic acid.     

Synthesis of C2-functionalized pyrimidines from 3,4-dihydropyrimidin-2(1H)-ones by the Mitsunobu coupling reaction

The Biginelli 3,4-dihydropyrimidin-2(1H)-one was converted to various C2-multifunctionalized pyrimidines via the dehydrogenation and Mitsunobu reaction using amines, alcohols, phenols and carboxylic acids as nucleophiles. A possible mechanism was also proposed to rationalize the formation of products.     

Efficient synthesis of cis- and trans-3,4-dihydroxy-3,4-dihydromollugin

An efficient synthesis of naturally occurring compounds isolated from Pentas longiflora, cis-3,4-dihydroxy-3,4-dihydromollugin 2, and trans-3,4-dihydroxy-3,4-dihydromollugin 3 is described. The O-protected mollugins were dihydroxylated using OsO4 to achieve the corresponding cis-dihydroxy derivatives in excellent yield. The synthesis of trans-3,4-dihydroxy-3,4-dihydromollugin was achieved using Oxone in good yield. A mechanism for the formation of cis-3,4-dihydroxymollugin acetonide from the reaction of mollugin with Oxone is proposed.     

An efficient synthesis of dienic nucleoside analogues via a Mitsunobu reaction

Nucleoside analogues 9 and 12 were obtained in good yields from alcohol 7 which, under Mitsunobu conditions, led to the title products after deprotection steps.     

Stereospecific synthesis of mexiletine and related compounds: Mitsunobu versus Williamson reaction

Mexiletine [1-(2,6-dimethylphenoxy)-2-propanamine], a chiral, orally effective antiarrhythmic agent, and several analogues substituted on either the stereogenic centre or the xylyloxy moiety, were prepared in both, highly enriched, optically active forms. According to the ‘chiral pool’ approach, the appropriate amino alcohols, protected as the corresponding phthalimide derivatives, were condensed with the desired phenols under either Mitsunobu (method A) or Williamson (method B) conditions. Generally, method A provided the most efficient route, both in terms of yields and number of steps necessary. Only when an isopropyl group was present on the stereogenic centre, i.e. when 2-amino-3-methylbutanol was used as the starting alcohol, method B proved to be the only available route, method A giving no product other than the starting phthalimide derivative. Regardless of the method used, enantiomeric excesses ranged from 91 to 99%. Given the availability of both variously substituted phenols and optically active amino alcohols, the two methods described herein, taken together, may serve as a versatile approach, useful to meet the needs of new chiral, optically active mexiletine analogues, possibly endowed with higher potency in exerting a use-dependent block on sodium channels and/or more resistant to biotransformations.     

Monomer-on-monomer (MoM) Mitsunobu reaction: facile purification utilizing surface-initiated sequestration

A monomer-on-monomer (MoM) Mitsunobu reaction utilizing norbornenyl-tagged (Nb-tagged) reagents is reported, whereby purification was rapidly achieved by employing ring-opening metathesis polymerization, which was initiated by any of three methods utilizing Grubbs catalyst: (i) free catalyst in solution, (ii) surface-initiated catalyst-armed silica, or (iii) surface-initiated catalyst-armed Co/C magnetic nanoparticles.     

Pd-mediated C-H arylation of EDOT and synthesis of push-pull systems incorporating EDOT

The direct C-H arylation of 3,4-ethylenedioxythiophene (EDOT) is described under Heck-type experimental conditions. This methodology has been used to synthesize a series of push-pull systems containing EDOT units.     

Copolymerization of Azobenzene-bearing Monomer and 3,4-Ethylenedioxythiophene(EDOT): Improved Electrochemical Performance for Electrochromic Device Applications

In this study,novel electrochromic copolymers of 3,4-ethylenedioxythiophene(EDOT)and(E)-1,2-bis(2-fluoro-4-(4-hexylthiophen-2-yl)phenyl)diazene(M1)with different monomer feed ratios were designed and synthesized electrochemically.Electrochemical and spectroelectrochemical characterizations were performed using voltammetry and UV-Vis-NIR spectrophotometry techniques to test the applicability of copolymers for electrochromic applications.In terms of electrochemical behaviors,addition of an electron-rich EDOT unit into the azobenzenecontaining copolymer increased the electron density on the polymer chain and afforded copolymers with very low oxidation potentials at around0.30 V.While the homopolymers(P1 and PEDOT)exhibited neutral state absorptions centered at 510 and 583 nm,EDOT-bearing copolymers showed red shifted absorptions compared to those of P1 with narrower optical band gaps.In addition,the poor optical contrast and switching times of azobenzene-bearing homopolymer were significantly improved with EDOT addition into the copolymer chain.As a result of the promising electrochromic and kinetic preperties,Co P1.5-bearing single layer electrochromic device that works between purple and light greenish blue colors was constructed and characterized.     

Biginelli-type reaction: Efficient synthesis of 5-unsubstituted 3,4-dihydropyrimidin-2-ones and thiones from gem-dibromomethylarenes

In the present study, we are reporting a simple and efficient method for the one-pot synthesis of the biologically important heterocyclic molecules 5-unsubstituted 3,4-dihydropyrimidin-2-ones and thiones using gem-dibromomethylarenes, oxalacetic acid, and urea or thiourea. Gem-dibromomethylarenes are used as aldehyde equivalent for the efficient synthesis of 3,4-dihydropyrimidin-2-ones/thiones. This reaction offers advantages for the synthesis of these compounds, including ready availability of the starting materials, experimental simplicity and in good yields. Besides, the synthesized molecules are interesting for their biological and pharmacological actions.