Ion-pair supercritical fluid chromatography of metoprolol and related amino alcohols on diol silica

In this paper, a chromatographic system based on carbon dioxide with methanol as mobile phase, and diol silica as stationary phase has been investigated for metoprolol and related amino alcohols by addition of strong acids to systems with triethylamine base as primary additive. Standard conditions used were 10% of methanol, containing 24 mM of acid and 18 mM of triethylamine, in carbon dioxide with a flow rate of 1.5 ml min(-1). The column dimensions were 125 mm x 4 mm I.D. and kept at 40 degrees C with a back pressure of 150 bar. Effects on selectivity were stronger with trifluoroacetic acid than with ethanesulfonic acid. From a large set of related analytes, it was shown that selectivity changes were significant when the structure close to the nitrogen of the amino alcohol analyte differed. The stability of the column in the short time perspective was examined and it showed negligible changes. For a diastereoisomeric pair, not resolved in a basic system with triethylamine nor by addition of ethanesulfonic acid, resolution improved to about 2.1 with trifluoroacetic acid. The described approach offers a way to tune the selectivity of SFC systems when amines are analyzed without the need to change stationary phase for the chromatographic separation.     

Supercritical fluid chromatography of carbohydrates

Supercritical fluid chromatography (SFC) is a relatively new technique applied to polar solutes such as carbohydrates about 10 years ago. The developments in the SFC of carbohydrates are summarized and a comparison between capillary and packed column SFC is presented. High-efficiency capillary columns are suitable only for derivatized carbohydrates since various packed columns are well adapted for non derivatized mono-, di- and trisaccharides and provide complementary selectivities.     

Supercritical fluid chromatography and two-dimensional supercritical fluid chromatography of polar car lubricant additives with neat CO(2) as mobile phase

Car lubricant additives are added to mineral or synthetic base stocks to improve viscosity and resistance to oxidation of the lubricant and to limit wear of engines. Their total amount in the commercial lubricant varies from a few percents to 20-25%. As they belong to various chemical classes and are added to a very complex medium, the base stock, their detailed chromatographic analysis is very difficult and time consuming as it should involve sample treatment and preparative scale separations in order to simplify the sample. The aim of this work is to determine the feasibility of the separation of low molecular weight lubricant additives using various packed columns with pure CO(2) as a mobile phase to enable implementation of flame ionisation detection as universal detector. This is part of a hypernated system including more sophisticated specific detectors, such as AED, FTIR or MS to obtain detailed structural information of compounds. This paper is devoted to the comparison of some stationary phases supposed to provide hydrocarbon group type separation (silica and normal phase) or separations on alkyl-bonded silica in non-aqueous mode of some selected classes of additives in test mixtures or in base stocks. Adsorption chromatography allows partial separation of additives from the base stocks while the direct elution of test additives can only be obtained on reversed phase supports having a very efficient silanol group protection so the interaction of the more polar compounds is much reduced. A two-dimensional scheme of analysis is also described. It combines adsorption chromatography to separate most of the polar additives from the base stock and alkyl-bonded silica for more detailed separation of the additives. However, overlapping between groups of compounds and the lack of resolution between some additives and the base stock should be addressed by the implementing of selective detectors.     

Supercritical fluid chromatography of imidazole derivatives

Summary The aim of this work was to use SFC to separate simple, slightly basic, imidazole derivatives which are used for the synthesis of more complex molecules with therapeutic properties. Control of their purity utilizes separation techniques and this paper shows what SFC can do in comparison with LC which requires derivatization before detection and with GC where peak tailing can be a problem. Our results concern the use of sub-critical mixtures of CO₂ and polar modifiers because imidazole derivatives react with neat CO₂, thus failing to elute from packed columns, and are only partially resolved on capillary columns with neat N₂O. Therefore, separations with CO₂-alcohol-amine-water mixtures on aminopropyl-bonded silica with UV detection are discussed. The resolution and sensitivity limits allow real sample analysis within a very short time.     

Supercritical fluid chromatography of industrial paraffins and waxes

Summary The application of capillary SFC for SIMDIST investigations of paraffins and waxes is reported. Pressure, density and temperature of the mobile phase are optimized to obtain high chromatographic resolution of complex mixtures of industrial products. Isothermal linear pressure programming and asymptotic pressure and density programming are used in the range from 15 to 35 MPa in the isothermic mode above 100°C. SFC chromatograms of natural and synthetic paraffins, microcrystalline wax and candle wax are compared. The retention behaviour of paraffin mixtures and waxes has been investigated on methyl/phenyl and biphenyl capillary columns. The polarity of the stationary phases influences the absolute retention time more than it influences the chromatographic resolution.     

Supercritical fluid chromatography of Fusarium mycotoxins.

Capillary- and packed-column supercritical fluid chromatography has been used for the separation of Fusarium mycotoxins of various structure types such as the trichothecenes including deoxynivalenol and its acetylated derivatives and T-2 toxin, as well as butenolide, culmorin, sambucinol and zearalenone. The effect of modifier concentration and column temperature and pressure was also studied. Retention indices based on alkylphenones were determined for these mycotoxins on two of the capillary columns employed.     

Supercritical fluid chromatography with redox chemiluminescence detection

Summary The new selective and sensitive redox chemiluminescence detector (RCD), originally developed for gas chromatography, has been successfully interfaced with a capillary column supercritical fluid chromatograph. Interfacing the SFC-RCD was accomplished simply through utilization of the redox reaction chamber presently used for both capillary and packed column GC. The feasibility of this new separation-detection scheme was demonstrated with SFC chromatograms of antioxidant isomers and some compounds of biological relevance. Mobile phase compatibility and signal quenching are also discussed.

---

Chromatographie mit überkritischen fluiden phasen unter Verwendung der Redox-Chemiluminescenz-Detektion

     

Asymmetric alkynylation of aldehydes with propiolates without high reagent loading and any additives

The asymmetric alkynylation of aliphatic and aromatic aldehydes with propiolates was mediated by dialkylzinc and a novel prolinol catalyst without high reagent loading and any additives, such as Ti(Oi-Pr)(4), to give the corresponding γ-hydroxy-α,β-acetylenic esters with high enantiomeric excess of up to 95%.     

Supercritical fluid extraction of aurentiamide acetate from Patrinia villosa Juss and subsequent isolation by silica gel and high-speed counter-current chromatography

Supercritical fluid extraction (SFE) of aurentiamide acetate from Patrinia villosa Juss was performed. The optimization of parameters was carried out using an analytical-scale supercritical fluid extraction (SFE) system. Then the extraction was scaled up by 100 times using a preparative SFE system under the optimized conditions of 55 degrees C, 35 MPa and modified CO2 with 10% methanol. Then, the crude extract I obtained by SFE was chromatographed on silica gel and the solvent system composed of petroleum ether-ethyl acetate (5:1, v/v) was used to produce the crude extract II, which was further isolated and purified by high-speed counter-current chromatography (HSCCC) with a two-phase solvent system composed of n-hexane-ethyl acetate-methanol-water (1:1.2:1.2:1, v/v/v/v). One hundred fifty-five milligrams of aurentiamide acetate was obtained from 400 mg crude extract II (contained 42% target) with a purity of 99.3% determined by HPLC and 92.3% recovery in one-step elution, and identification was performed by UV, MS, 1H NMR and 13C NMR. As far as we know, this is the first report of discovering aurentiamide acetate from the plant of Patrinia genius.     

Supercritical fluid chromatography of fish,shark and seal oils

Summary Various natural and treated fish, shark liver and seal oils have been analyzed by supercritical fluid chromatography (SFC) using a non-polar capillary column. The lipids are separated according to molecular mass. The lipid groups found included free fatty acids, cholesterol, squalene, vitamins, wax esters, cholesterol esters, diglycerides, triglycerides and ether lipids. Methods for the analysis of the marine oils depend on components present in the oil. When co-eluting lipid groups were present, modifications such as hydrogenation or TLC fractionation of the oils had to be made. In this paper applications of SFC on fish, seal and shark liver oils are presented.     

Chromatographic behavior of epirubicin and its analogues on high-purity silica in hydrophilic interaction chromatography

Hydrophilic interaction chromatography has been applied for the separation of epirubicin and its analogues using high-purity silica column with aqueous-organic mobile phase. Parameters affecting the chromatographic behavior of the solutes such as organic modifier, buffer pH, ionic strength and sample size, have been investigated. Of utmost importance for successful separation of these analogues is the choice of organic modifier, since it impacts both the solvent selectivity and the ionization of silica silanols as well as buffer solution, and consequently the retention behavior of solutes. Acetonitrile was shown to offer superior separation of these analogues to methanol, isopropanol or tetrahydrofuran. Results of the effects of organic modifier, buffer pH and ion strength indicate that the retention mechanism is a mixed-mode of adsorption and ion exchange. In addition, an irreversible adsorption of these compounds was found on silica in the weakly acidic or neutral mobile phases, and the effect of various factors on irreversible adsorption was also preliminarily discussed. More significantly, these basic compounds have exhibited peaks with a slanted front and a sharp tail, a typical overloading peak profile belonging to the behavior of competitive anti-Langmuir isotherm by increasing the sample size at the experimental conditions.     

Supercritical fluid chromatography and some of its applications: A review

The general topic of supercritical fluid chromatography (SFC) is introduced, and historical aspects of its development are discussed. The physical properties of supercritical fluids, gases and liquids are tabulated. SFC is compared and contrasted with the classical forms of chromatography - gas chromatography (GC) and high performance liquid chromatography (HPLC). The selectivity of SFC, GC, and HPLC are discussed and compared. Instrumentation employed for supercritical fluid chromatography is depicted. A wide variety of SFC applications are introduced. New examples of the use of SFC for analysis of a variety of complex oligomeric mixtures indcluding polypropylene glycol, polysiloxanes, fluorocarbon oligomers (i.e. -3M's fluoro-chemical surfactant Fluorad 171, and Kel-F) and high molecular weight normal alcohols are shown. The use of SFC for separation of mono-, di-, and triglycerides at low operating temperatures is described. Lastly, the use of SFC for separations of complex hydrocarbon mixtures from liquid fuels, polycyclic aromatic hydrocarbons, synthetic alpha-olefins, and petroleum functional group separations are depicted.     

Supercritical fluid injection of high-molecular-weight polycyclic aromatic compounds in capillary supercritical fluid chromatography

A sample introduction system for capillary supercritical fluid chromatography, which allows the dissolution of the sample in the supercritical mobile phase before being introduced into the column, was constructed and evaluated. Supercritical n-pentane was shown to solvate high-molecular-weight polycyclic aromatic compounds that could not be solvated using typical liquid solvents. In addition, split injection of a supercritical fluid solution was found to be more reproducible than split injections of a liquid solution. The potential of such an injection system was demonstrated, although further developments are needed in order to make the technique of practically utility.     

Supercritical fluid chromatography: Retention, resolution, and gradient methods

Summary For applying gradient methods in supercritical fluid chromatography (SFC), the dependence of retention and resolution on the physical parameters, temperature, pressure/density, linear velocity, and mobile phase composition, is of particular relevance. This stems from the finding that the dependence of retention and resolution on physical parameters is more varied for SFC than for either gas or liquid chromatography. Thus, both retention and resolution tend to form maxima with temperature at constant pressure. In this communication, the dependence of capacity ratio k and resolution R on temperature and pressure is shown as three-dimensional plots. From these plots the general requirements for single and multiple gradients are discussed. In addition, equations are given which relate the contributions of vapor pressure and solvation to the measured capacity ratio k and selectivity .

---

Chromatographie mit überkritischen fluiden Phasen: Retention, Auflösung und Gradientenmethoden

     

Highly efficient and green esterification of carboxylic acids in deep eutectic solvents without any other additives

A protocol that carboxylic acids esterifies with the quaternary ammonium salt of deep eutectic solvent (DES) is presented, which opens a new access to ester using DES as alkylating agent, solvent, and catalyst. The reaction runs smoothly in DES without any other additives. Substituted cinnamic acids, aromatic acids, and aliphatic acids can be esterified in moderate to good yields. The advantages of this reaction include excellent functional group compatibility and simple reaction procedure.