多氯代吩噁嗪热力学性质的密度泛函理论研究

在B3LYP/6-31G*水平上对135个多氯代吩噁嗪(PCPXs)系列化合物进行了全优化和振动分析计算, 得到各分子在298.15 K, 1.013×105 Pa标准状态下的热力学性质. 设计等键反应, 计算了PCPXs系列化合物的标准生成热(Δf )和标准生成自由能(Δf ), 研究了这些参数与氯原子的取代位置及取代数目(NPCS)之间的关系, 结果表明: 熵( )、Δf , Δf 与NPCS之间有很强的相关性. 根据异构体标准生成自由能的相对大小, 从理论上求得异构体的相对稳定性. 以Gaussian 03程序的输出文件为基础, 采用统计热力学程序计算了PCPXs化合物在200 K至1800 K的摩尔恒压热容(Cp,m), 并用最小二乘法求得Cp,m与温度之间的相关方程, 发现Cp,m与T, T－1和T－2之间有着很好的相关性.     

多氯咔唑系列化合物的热力学性质的密度泛函理论研究

采用Gaussian 03程序中的密度泛函(DFT)方法, 在B3LYP/6-31G*水平上对135个多氯咔唑系列化合物(PCCZs)进行了全优化计算, 得到了298.15 K, 1.013×105 Pa标准状态下各分子的热力学性质. 设计等键反应, 计算了PCCZs系列化合物的标准生成热(ΔfHÖ)和标准生成自由能(ΔfGÖ), 研究了这些参数与氯原子的取代位置及取代数目(NPCS)之间的关系, 结果表明: 熵(SÖ), ΔfHÖ, ΔfGÖ与NPCS之间有很强的相关性. 并根据ΔfGÖ的相对大小, 从理论上求得异构体的相对稳定性的顺序. 此外, 以Gaussian 03程序的输出文件为基础, 采用统计热力学程序计算了PCCZs化合物在200至1800 K的摩尔恒压热容(Cp,m), 并用最小二乘法求得Cp,m与温度之间的相关方程, 发现Cp,m与T, T－1和T－2之间有着很好的相关性.     

多氯二苯硫醚结构参数和热力学性质的密度泛函理论研究

在B3LYP/6-31G*水平上对209个多氯二苯硫醚(PCDS)系列化合物进行了全优化计算, 得到各分子的结构参数和热力学参数. 研究了这些参数与氯原子在苯环各位置的取代数目和相互位置(N_PCS)之间的关系发现: 分子平均极化率(α)、焓(H $)、自由能(G $)、恒容热容( )和熵(S $)与N_PCS之间有很强的相关性, 相关性系数r²＞0.988, 分子体积(V_m)、最高占据轨道能(E_HOMO)和最低未占据轨道能(E_LUMO)与N_PCS也有较好的相关性, 相关性系数r²分别为0.949, 0.894和0.915. 设计等键反应, 计算了PCDS各异构体的标准生成热(Δ_fH $)和标准生成自由能(Δ_fG $). 根据异构体自由能的相对大小, 求得异构体的相对稳定性顺序.     

多氯联苯醚的结构参数和热力学性质的密度泛函理论研究

采用密度泛函理论(DFT)方法在B3LYP/6-31G*水平上对209个多氯联苯醚(PCDEs)系列化合物进行了全优化和振动分析计算, 得到各分子的结构参数和热力学性质, 并研究了这些参数与氯原子的取代位置及取代数目(N_PCS)之间的关系. 结果表明: 分子平均极化率(α)、焓(H^Ө)、自由能(G^Ө)、恒容热容( )和熵(S^Ө)与N_PCS之间有很强的相关性(相关性系数r²分别为0.9955, 1.0000, 1.0000, 0.9918, 0.9995), 分子体积(V_m)和最高占据轨道能(E_HOMO)与N_PCS也有较好的相关性, 相关性系数r²分别为0.9735和0.9362. 设计等键反应, 计算了PCDEs系列化合物的标准生成热(Δ_fH^Ө)和标准生成自由能(Δ_fG^Ө). 根据异构体自由能的相对大小, 从理论上求得异构体的相对稳定性顺序.     

多溴吩噻嗪系列化合物的稳定性和热力学性质的密度泛函理论研究

用Gaussian 03程序, 在B3LYP/6-31G*水平上全优化计算了吩噻嗪和135个多溴吩噻嗪系列化合物(PBPTHs)在298.15 K和101.3 kPa状态时的热力学参数. 设计等键反应, 计算了PBPTHs系列化合物的标准生成热( )和标准生成自由能( ). 同时研究了这些参数与溴原子的取代位置及取代数目(NPBS)之间的关系. 结果表明: 多溴吩噻嗪的热能校正值(Eth)、恒容热容( )、标准熵( )、标准焓( )以及标准自由能( )与NPBS之间有很强的相关性(r2≥0.998). 在相关方程中, 溴原子的取代个数对多溴代吩噻嗪热力学数值的大小有很大影响. 根据 的相对大小, 从理论上求得异构体的相对稳定性顺序.     

多溴代二苯胺热力学性质的密度泛函理论研究

在B3LYP/6-31G*水平上对209个多溴代二苯胺(PBDPA)系列化合物进行了全优化和振动分析计算, 得到各分子在298.15 K, 101.3 kPa标准状态下的热力学参数. 设计等键反应, 计算了PBDPA系列化合物的标准生成热(ΔfHÖ)和标准生成自由能(ΔfGÖ). 研究了热力学参数SÖ与溴原子的取代位置及取代数目(NPBS)之间的关系, 结果表明: PBDPA系列化合物的SÖ, ΔfHÖ和ΔfGÖ与NPBS之间有很强的相关性(R2≥0.984). 根据异构体标准生成自由能的相对大小, 从理论上求得异构体的相对稳定性. 以Gaussian 03程序的输出文件为基础, 采用统计热力学程序计算了PBDPA化合物在200 K至1000 K的摩尔恒压热容(Cp,m), 并用最小二乘法求得Cp,m与温度之间的相关方程, 发现Cp,m与T, T－1和T－2之间有着很好的相关性(R2＝1.000).     

多氯代二苯并呋喃在不同色谱柱上的气相色谱保留行为——定量结构-色谱保留关系(QSRR)的研究

 以一种拟原子的方式处理多氯代二苯并呋喃 (PCDFs)异构体中的苯环 ,将PCDFs异构体中的原子或基团分为 3类 ,即 :氯原子 (Cl) (记为“1”) ,氧原子 (O) (记为“2”)及拟原子 (B) (记为“3”)。在烷烃分子距边矢量的基础上 ,提出一种以基团为基准的分子距离边数矢量 (μ矢量 ) ,借助多元线性回归方法分别建立了多氯代二苯并呋喃在不同色谱柱上的色谱保留指数与表征其结构的 μ矢量间的定量结构 色谱保留关系 (QSRR)相关模型。各样本总体所建模型的相关系数均在 0 98以上。     

多溴代二苯硫醚系列化合物的热力学性质和稳定性的理论研究

在B3LYP/6-31G*水平上对209个多溴代二苯硫醚(PBDS)系列化合物进行了全优化和振动分析计算,得到各分子在298.15K,1.013×105Pa标准状态下的热力学参数.研究了热力学参数S与溴原子的取代位置及取代数目(NPBS)之间的关系,结果表明:S与NPBS之间有很强的相关性(R2=0.993).设计等键反应,计算了PBDS系列化合物的标准生成热(△fH)和标准生成自由能(△fG).根据异构体标准生成自由能的相对大小,从理论上求得异构体的相对稳定性.以Gaussian03程序的输出文件为基础,采用统计热力学程序计算了PBDS化合物在200至1000K的摩尔恒压热容(Cp,m),并用最小二乘法求得Cp,m与温度之间的相关方程,发现Cp,m与T,T-1和T-2之间有着很好的相关性(R2=1.000).     

多氯10-氧吩噁噻系列化合物的热力学性质及稳定性的密度泛函理论方法研究

采用Gaussian 03程序中的密度泛函理论(DFT)方法,在BHandHLYP/6-311G**水平上对135个多氯10-氧吩噁噻系列化合物(PCPTO)进行了全优化和振动分析计算,得到了各分子在298.15K,1.013×105Pa标准状态下的热力学参数.设计等键反应,计算了PCPTO系列化合物的标准生成热(△fH)和标准生成自由能(△fG),同时研究了这些参数与氯原子的取代位置及取代数目(NPCS)之间的关系.结果表明:熵(S),△fH,△fG与NPCS之间有很强的相关性(R2≥0.991).根据△fG的相对大小,从理论上求得异构体的相对稳定性.以Gaussian 03程序的输出文件为基础,采用统计热力学程序计算了PCPTO化合物在200至1000K的摩尔恒压热容(Cp,m),并用最小二乘法求得Cp,m与温度之间的相关方程,结果发现Cp,m与T,T-1和T-2之间有着很好的相关性(R2=1.000).     

多溴代芴热力学性质的理论预测研究

为了预测环境污染物多溴代芴的热力学性质,计算了60种多溴代芴的分子连接性指数、电性距离矢量指数、电性拓扑状态指数以及分子形状指数.采用多元线性回归的方法建立了多溴代芴化合物的标准生成焓(Δ_fH~0)、标准熵(S~0)、标准生成吉布斯自由能(Δ_fG~0)及等容热容等热力学性质的QSPR相关性模型,方程的相关系数值均在0.99以上.与相关文献的相关系数R和标准误差S进行比较,该模型具有良好的预测能力和稳定性.     

Theoretical Studies on the Molecular Structures and Thermodynamic Properties of Polychlorinated Fluoranthenes

DFT-B3LYP/6-311G** method has been used to optimize molecular geometric structures of 527 polychlorinated fluoranthene(PCFRT) congeners and calculate their thermo-dynamic properties in the ideal gas state,such as heat capacity at constant volume(Cv),entropy(S),standard enthalpy of formation(ΔfH) and standard Gibbs free energy of formation(ΔfG).The relations of Cv,S,ΔfH and ΔfG with the number and position of chlorine atoms have also been explored,from which the relative stability of PCFRT congeners was theoretically proposed according to the magnitude of the relative standard Gibbs free energy of formation(Δr,fG).It was found that some of the PCFRT isomers are in a nonplanar configuration and there are intramolecular Cl…Cl weak interactions in some of the isomers.With increasing the number of chlorine atoms,the values of ΔfH and ΔfG of the most stable PCFRT isomers decrease initially and then increase.The values of ΔfH and ΔfG of PCFRT congeners with the same number of chlorine atoms show a strong dependence on the positions of chlorine atoms.The relative thermodynamic stability of PCFRT isomers is determined mainly by intramolecular adjacent Cl…Cl nuclear repulsive interaction between Cl atoms at two different six-membered rings.Most PCFRT congeners are easier to form thermodynamically than their parent compound.     

Theoretical Studies on the Molecular Structures and Thermodynamic Properties of Polychlorinated Acenaphthylenes

Geometric structures of 135 polychlorinated acenaphthylene (PCAC) molecules were optimized using density functional theory (DFT) at the B3LYP/6-311G** level and some thermodynamic properties of them in the ideal gas state were calculated. The relations of these thermodynamic properties with the number and position of chlorine atoms were also explored, from which the relative stability of PCAC congeners was theoretically proposed according to the magnitude of the relative standard Gibbs free energy of formation (△r,fGθ). The results show that all PCAC isomers have planar geometric configuration. There exists intramolecular Cl···Cl weak interaction in some PCAC molecules. The change of △fHθ and fGθ of most stable PCAC isomers with increasing the number of chlorine atoms is different from that in the least stable PCAC congeners. The values of fHθ and fGθ for PCAC isomers with the same number of chlorine atoms show a strong dependence on the position of chlorine atoms and the relative stability of PCAC congeners has close relation with the intramolecular Cl···Cl nuclear repulsive interaction.     

Theoretical Studies on the Molecular Structures and Thermodynamic Properties of Polychlorinated Fluorenes

Geometric structures of 135 polychlorinated fluorene (PCFR) molecules were optimized using density functional theory (DFT) at the B3LYP/6-311G** level and their thermodynamic properties in the ideal gas state were calculated. The relations of these thermodynamic properties with the number and position of chlorine atoms were also explored, from which the relative stability of PCFR congeners was theoretically proposed according to the magnitude of the relative standard Gibbs free energy of formation (Δr,fGθ). The results show that the geometric configuration of PCFR isomers is determined by the position of chlorine atoms. There exist two types of intramolecular weak interactions, i.e., C-H···Cl and Cl···Cl interactions in PCFR molecules. The change of ΔfHθ and ΔfGθ of most stable PCFR isomers with increasing the number of chlorine atoms is different from that in most unstable PCFR congeners. The values of ΔfHθ and ΔfGθ for PCFR isomers with the same number of chlorine atoms strongly depend on the position of chlorine atoms and the relative stability of PCFR congeners is mainly determined by intramolecular delocalized π bond and Cl···Cl nuclear repulsive interaction.     

Comparative Study on Thermodynamic Properties and Stabilities of Polychloro-phenazines and Polychlorinated Dibenzo-p-dioxin

The thermodynamic properties and molecular volumes （Vm） of 76 polychlorophenazines （PCPZs） have been calculated at the B3LYP/6-31G^＊ level by using density functional theory. The isodesmic reactions were designed to calculate standard enthalpy of formation （△fH^θ） and standard free energy of formation （△fG^θ） of PCPZ congeners. According to the relative magnitude of their △fG^θ, the order of relative stability of PCPZ congeners was theoretically proposed. Comparing the results with those of polychlorinated dibenzo-p-dioxin （PCDD） isomers, it was found that S^θ, △fH^θ, △fG^θ, Vm and the order of relative stability of PCPZ congeners were quite similar to those of PCDDs.     

Studies of Thermodynamic Properties and Relative Stability of Polybrominated Xanthones by Density Functional Theory

The thermodynamic properties of xanthone(XTH) and 135 polybrominated xanthones(PBXTHs) in the standard state have been calculated at the B3LYP/6-31G* level using Gaussian 03 program.The isodesmic reactions were designed to calculate the standard enthalpy of formation(△fHθ) and standard free energy of formation(△fGθ) of PBXTH congeners.The relations of these thermodynamic parameters with the number and position of Br atom substitution(NPBS) were discussed,and it was found that there exist high correlation between thermodynamic parameters(entropy(Sθ),△fHθ and △fGθ) and NPBS.According to the relative magnitude of their △fGθ,the relative stability order of PBXTH congeners was theoretically proposed.The relative rate constants of formation reactions of PBXTH congeners were calculated,Moreover,the values of molar heat capacity at constant pressure(Cp,m) from 200 to 1000 K for PBXTH congeners were also calculated,and the temperature dependence relation of them was obtained,suggesting very good relationships between Cp,m and temperature(T,T-1 and T-2) for almost all PBXTH congeners.