Aqueous sol–gel processing of precursor oxides for ZrW<Subscript>2</Subscript>O<Subscript>8</Subscript> synthesis

This paper describes the synthesis of ZrW₂O₈ by the use of an aqueous citrate-gel method in order to prepare a fine, pure and homogeneous oxide mixture suitable for ceramic processing. The thermal expansion coefficient thus obtained for α-ZrW₂O₈ is −10.6 × 10⁻⁶ °C⁻¹ (50–125 °C) whereas for the β-ZrW₂O₈ a value of −3.2 × 10⁻⁶ °C⁻¹ (200–300 °C) is obtained. The advantages of the use of a sol–gel method is expressed in the very homogeneous end-products. The paper describes crystallographic data, morphological structure and the thermal expansion properties of the ZrW₂O₈ material. Moreover, photoluminescence and photochromic properties specific to the precursor gel are described and analyzed. These effects support our views that the precursors show homogeneity up to nanometer level.     

Effect of metal substitution for cobalt on the oxygen adsorption properties of YBaCo<Subscript>4</Subscript>O<Subscript>7</Subscript>

YBaCo₄O₇ compound is capable to intake and release a large amount of oxygen in the temperature range of 200–400°C. In the present study, the effect of Zn, Ga and Fe substitution for Co on the oxygen adsorption/desorption properties of YBaCo₄O₇ were investigated by thermogravimetry (TG) method. Due to fixed oxidation state of Zn2+ ions, the substitution of Zn²⁺ for Co²⁺ suppresses the oxygen adsorption of YBaCo_4−xZn_xO₇. The substitution of Ga³⁺ for Co³⁺ also decreases the oxygen absorption capacity of YBaCo_4−xGa_xO₇. This can be explained by the strong affinity of Ga³⁺ ions towards the GaO₄ tetrahedron. Compared with Zn- and Ga-substituted samples, the drop of oxygen adsorption capacity is smallest for Fe-substituted samples because of the similar changeability of oxidation states of Co and Fe ions.     

Synthesis of ammonia from natural gas at atmospheric pressure with doped ceria–Ca<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>–K<Subscript>3</Subscript>PO<Subscript>4</Subscript> composite electrolyte and its proton conductivity at intermediate temperature

A new type of oxide–salt composite electrolyte, yttrium doped ceria YDC–Ca₃(PO₄)₂–K₃PO₄, was developed and demonstrated for its promising use for ammonia synthesis. Using this composite electrolyte, ammonia was synthesized from nitrogen and natural gas at atmospheric pressure in the solid-state proton conducting cell reactor, and the optimal condition for ammonia production was determined . The evolved rate of ammonia is up to 6.95×10⁻⁹ mol s⁻¹ cm⁻².     

Ammonia gas sensor based on a spinel semiconductor,Co<Subscript>0.8</Subscript>Ni<Subscript>0.2</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanomaterial

Thick film of nanocrystalline Co_0.8Ni_0.2Fe₂O₄ was obtained by sol–gel citrate method for gas sensing application. The synthesized powder was characterized by X-ray diffraction (XRD) and transmission electron microscopy. The XRD pattern shows spinel type structure of Co_0.8Ni_0.2Fe₂O₄. XRD of Co_0.8Ni_0.2Fe₂O₄ revels formation of solid solution with average grain size of about 30 nm. From gas sensing properties it observed that nickel doping improves the sensor response and selectivity towards ammonia gas and very low response to LPG, CO, and H₂S at 280 °C. Furthermore, incorporation of Pd improves the sensor response and stability of ammonia gas and reduced the operating temperature upto 210 °C. The sensor is a promising candidate for practical detector of ammonia.     

Synthesis and electrochemical properties of Ca-doped LiNi<Subscript>0.8</Subscript>Co<Subscript>0.2</Subscript>O<Subscript>2</Subscript> cathode material for lithium ion battery

LiNi_0.8Co_0.2O₂ and Ca-doped LiNi_0.8Co_0.2O₂ cathode materials have been synthesized via a rheological phase reaction method. X-ray diffraction studies show that the Ca-doped material, and also the discharged electrode, maintains a hexagonal structure even when cycled in the range of 3.0–4.35 V (vs Li⁺/Li) after 100 cycles. Electrochemical tests show that Ca doping significantly improves the reversible capacity and cyclability. The improvement is attributed to the formation of defects caused by the partial occupancy of Ca²⁺ ions in lithium lattice sites, which reduce the resistance and thus improve the electrochemical properties.     

Effect of the preparation method on the catalytic performance of Ca<Subscript>3</Subscript>Co<Subscript>4</Subscript>O<Subscript>9</Subscript> for methane oxidation

The layered structure oxide Ca₃Co₄O₉ particle was synthesized by two routes of citrate sol–gel method. The structure, morphology and surface property of Ca₃Co₄O₉ was characterized by XRD, SEM and XPS, respectively. The catalytic activity of Ca₃Co₄O₉ for methane combustion was tested in a fixed bed quartz tubular microreactor. The catalysis results reveal that the catalytic activity is sensitive to the texture of Ca₃Co₄O₉ by different route. TG measures confirm that the small particle size of Ca₃Co₄O₉ favors the oxygen transformation on the surface, which can be ascribed the random distribution of the crystal axes in irregular Ca₃Co₄O₉ particle.     

Cellulose scaffolds modulated synthesis of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocrystals: preparation,characterization and properties

Magnetic Co₃O₄ nanoparticles were prepared by using microporous regenerated cellulose films as sacrificial scaffolds. The cellulose macromolecules and the porous structure of the films made them used as spatially confined reacting sites where Co(OH)₂ nanoparticles could be synthesized in situ. When the cellulose matrix was removed by sintering at 500 °C, Co₃O₄ nanoparticles were obtained. XRD and XPS indicated that the prepared nanoparticles were pure Co₃O₄ without any impurity. TEM and SEM images revealed that the particle size of the nanoparticles was smaller than 100 nm. The nanoparticles had weak ferromagnetic properties at 25 °C. Furthermore, the pronounced quantum confinement effects of the synthesized nanoparticles have been observed, the optical bandgap energies determined were about 1.92 ~ 2.12 and 2.74 ~ 2.76 eV for O²⁻ → Co³⁺ and O²⁻ → Co²⁺ charge-transfer processes, respectively. Furthermore, the resulted Co₃O₄ nanoparticles behaved stable electrochemical performance with promising applications in the electrode for lithium ion battery.     

Comparative study of the synthesis of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> and NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> in silica through the polymerized complex route of the sol–gel method

In this work the synthesis of CoFe₂O₄-SiO₂ and NiFe₂O₄-SiO₂ nanocomposites was studied via the sol–gel method, using the polymerized complex route. The polymerized precursors obtained by the reaction of citric acid, ethylene glycol, tetraethylorthosilicate, ferric nitrate, and cobalt nitrate or nickel chloride were characterized by nuclear magnetic resonance (NMR) and infrared (IR) spectroscopy. NMR and IR spectra of the precursors, without and with metallic ions, show the formation of polymeric chains with ester and ether groups and complexes of metal-polymeric precursor. The nanocomposites were obtained by the thermal decomposition of the organic fraction and characterized by X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). XRD patterns show the formation of CoFe₂O₄ and NiFe₂O₄ in an amorphous silica matrix above 400 °C in both cases. When the calcination temperature was 800 °C the particle size of the crystalline phases, calculated using the Scherrer equation, reached ∼35 nm for the two oxides. VSM plots show the ferrimagnetic behavior that is expected for this type of magnetic material; the magnetization at 12.5 KOe of the CoFe₂O₄-SiO₂ and NiFe₂O₄-SiO₂ compounds was 29.5 and 17.4 emu/g, respectively, for samples treated at 800 °C.     

Synthesis and characterization of submicron size particles of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> by microemulsion route

Among the various positive electrode materials investigated for Li-ion batteries, spinel LiMn₂O₄ is one of the most important materials. Small particles of the active materials facilitate high-rate capability due to large surface to mass ratio and small diffusion path length. The present work involves the synthesis of submicron size particles of LiMn₂O₄ in a quaternary microemulsion medium. The precursor obtained from the reaction is heated at different temperatures in the range from 400 to 900 °C. The samples heated at 800 and 900 °C are found to possess pure spinel phase with particle size <200 nm, as evidenced from XRD, SEM, and TEM studies. The electrochemical characterization studies provide discharge capacity values of about 100 mAh g⁻¹ at C/5 rate, and there is a moderate decrease in capacity by increasing the rate of charge–discharge cycling. Studies also include charge–discharge cycling and ac impedance studies in temperature range from −10 to 40 °C. Impedance data are analyzed with the help of an equivalent circuit and a nonlinear least squares fitting program. From temperature dependence of charge-transfer resistance, a value of 0.62 eV is obtained for the activation energy of Mn³⁺/Mn⁴⁺ redox process, which accompanies the intercalation/deintercalation of the Li⁺ ion in LiMn₂O₄.     

Osmotic Coefficients of the Li<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript>+LiCl + H<Subscript>2</Subscript>O System at <Emphasis Type="Italic">T</Emphasis>=273.15 K

Osmotic coefficients and water activities for the Li₂B₄O₇+LiCl+H₂O system have been measured at T=273.15 K by the isopiestic method, using an improved apparatus. Two types of osmotic coefficients, φ _S and φ _E, were determined. φ _S is based on the stoichiometric molalities of the solute Li₂B₄O₇(aq), and φ _E is based on equilibrium molalities from consideration of the equilibrium speciation into H₃BO₃,B(OH)₄⁻ and B₃O₃(OH)₄⁻. The stoichiometric equilibrium constants K _m for the aqueous speciation reactions were estimated. Two types of representations of the osmotic coefficients for the Li₂B₄O₇+LiCl+H₂O system are presented with ion-interaction models based on Pitzer’s equations with minor modifications: model (I) represents the φ _S data with six parameters based on considering the ion-interactions between three ionic species of Li⁺, Cl⁻, and B₄O₇²⁻, and model (II) for represents the φ _E data based on considering the equilibrium speciation. The parameters of models (I) and (II) are presented. The standard deviations for the two models are 0.0152 and 0.0298, respectively. Model (I) was more satisfactory than model (II) for representing the isopiestic data.     

Synthesis and characterization of La<Subscript>0.8</Subscript>Sr<Subscript>0.2</Subscript>Co<Subscript>0.5</Subscript>Fe<Subscript>0.5</Subscript>O<Subscript>3±δ</Subscript> nanopowders by microwave assisted sol–gel route

Nano-crystalline La_0.8Sr_0.2Co_0.5Fe_0.5O_3±δ powder has been successfully synthesized by microwave assisted sol–gel (MWSG) method. The decomposition and crystallization behavior of the gel-precursor was studied by Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) analysis. From the result of FT-IR and X-ray diffraction patterns, it is found that a perovskite La_0.8Sr_0.2Co_0.5Fe_0.5O_3±δ was formed by irradiating the precursor at 700 W for 3 min, but the well-crystalline perovskite La_0.8Sr_0.2Co_0.5Fe_0.5O_3±δ was obtained at 700 W for 35 min. Morphological and specific area analysis of the powder were done by transmission electron microscopy (TEM), scanning electron microscope (SEM) and Brunauer–Emmett–Teller (BET). The surface areas measured was 38.9 m²/g and the grain size was ∼23 nm. Electrochemical properties of pure LSCF cathode on YSZ electrolyte at intermediate temperatures were investigated by using AC impedance analyzer, which shows a low area specific resistance (0.077 Ω cm² at 1073 K and 0.672 Ω cm² at 953 K). Moreover, the synthesis period of 20 h usually observed for conventional heating mode is reduced to a few minutes. Thus, the MWSG method is proved to be a novel, extremely facile, time-saving and energy-efficient route to synthesize LSCF powders.     

Electrochemical deposition of Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> for thermoelectric microdevices

The electrolyses of solutions of bismuth oxide and tellurium oxide in nitric acid with molar ratios of Bi:Te=3:3–4:3 lead to cathodic deposits of films of bismuth telluride (Bi₂Te₃), an n-type semiconductor. Current densities of 2–5 mA/cm² were applied. Voltammetric investigations showed that Bi₂Te₃ deposition occurred at potentials more negative than −0.125 V (Ag/AgCl, 3 M KCl). The deposit was identified as bismuth telluride (γ-phase) by X-ray analysis. Hall-effect measurements verified the n-type semiconducting behaviour. The films can be deposited in microstructures for thermoelectric microdevices like thermoelectric batteries or thermoelectric sensors.     

Preparation and characterization of ZrWMoO<Subscript>8</Subscript> powders with different morphologies

ZrWMoO₈ powders with different morphologies were obtained using ammonium tungstate, molybdate tungstate and zirconium tungstate as the starting materials by dehydrating the precursor ZrWMoO₇(OH)₂(H₂O)₂. The precursor was studied by thermo-gravimetric and differential scanning calorimetry (TG-DSC). The influence of the gelling agents (HCl, HClO₄, HNO₃, H₂SO₄ and H₃PO₄) on the crystallization process and crystal morphology of the products prepared was investigated by X-ray powder diffraction (XRD), scanning electron micrograph (SEM) and X-ray fluorescence spectrometer (XRF). Results showed that the morphology of the ZrWMoO₈ particles can be simply adjusted by changing the gelling agents, and the thermal expansion coefficients of cubic ZrWMoO₈ prepared in HCl solution are −3.84 × 10⁻⁶ K⁻¹ from 100°C to 700°C. __________ Translated from Chemical Journal of Chinese University, 2007, 28(3): 397–401 [译自: 高等学校化学学报]     

Determination of the enthalpy of fusion of K<Subscript>3</Subscript>TaO<Subscript>2</Subscript>F<Subscript>4</Subscript> and KTaF<Subscript>6</Subscript>

Areas of fusion and crystallization peaks of K₃TaO₂F₄ and KTaF₆ were measured using the DSC mode of a high-temperature calorimeter (SETARAM 1800 K). On the basis of these quantities, considering the temperature dependence of the calorimeter sensitivity, values of the fusion enthalpy of K₃TaO₂F₄ at the fusion temperature of 1181 K of (43 ± 4) kJ mol⁻¹ and of KTaF₆ at the fusion temperature of 760 K of (8 ± 1) kJ mol⁻¹ were determined.     

Phase relations in the CoO–V<Subscript>2</Subscript>O<Subscript>5</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system in subsolidus area

Thermal properties of Co₂FeV₃O₁₁ have been reinvestigated. It has been proved that this compound does not exhibit polymorphism. It melts incongruently at the temperature of 770±5°C and the phase with lyonsite type structure is the solid product of this melting. Phase relations in the whole subsolidus area of the CoO–V₂O₅–Fe₂O₃ system have been determined. The solidus area projection onto the component concentration triangle plane of this system has been constructed using the DTA and XRD methods. 15 subsidiary subsystems can be distinguished in this system.     

Lithium-conducting solid electrolytes of Li<Subscript>4</Subscript>GeO<Subscript>4</Subscript>-Li<Subscript>3</Subscript>PO<Subscript>4</Subscript> system with additions of zirconium ions

The effect of partial substitution of Zr⁴⁺ ions for Ge4+ ions in highly conducting lithium-cationic solid electrolyte Li_3.75Ge_0.75P_0.25O₄ is studied. It is found that the introduction of zirconium ions considerably raises the conductivity of basic electrolyte in the high-temperature range. For the optimal composition, the conductivity is 2.82 × 10⁻¹ S cm⁻¹ at 400°C and 1.55 S cm⁻¹ at 700°C. Possible reasons for the effects are discussed.     

LaCrO<Subscript>3</Subscript> powder from lanthanum trisoxalatochromate(III) (LTCR) precursor

Lanthanum chromite LaCrO₃, an important catalyst and interconnect material used in solid oxide fuel cell was prepared from lanthanumtrisoxalatochromate(III) hydrate [LaCr(C₂O₄)₃]·9H₂O (LTCR) employing microwave heating technique. The compound LTCR heated in microwave heating system gave pure LaCrO₃ at 500°C within one hour. However LTCR heated in silicon carbide furnace yielded LaCrO₃ at 900°C. BET surface area of LaCrO₃ prepared by microwave and conventional heating techniques were found to be 2.8 and 1.2 m² g⁻¹, respectively. Thermogravimetry, differential thermal analysis and X-ray diffraction techniques were used to optimize the conditions for the microwave processing of the precursor.     

Enthalpy of formation of BaCe<Subscript>0.9</Subscript>In<Subscript>0.1</Subscript>O<Subscript>3−δ</Subscript>(s)

Enthalpy of formation of the perovskite-related oxide BaCe_0.9In_0.1O_2.95 has been determined at 298.15 K by solution calorimetry. Solution enthalpies of barium cerate doped with indium and mixture of BaCl₂, CeCl₃, InCl₃ in ratio 1:0.9:0.1 have been measured in 1 M HCl with 0.1 M KI. The standard formation enthalpy of BaCe_0.9In_0.1O_2.95 has been calculated as −1611.7±2.6 kJ mol⁻¹. Room-temperature stability of this compound has been assessed in terms of parent binary oxides. The formation enthalpy of barium cerate doped by indium from the mixture of binary oxides is Δ_ox H ⁰ (298.15 K)=−36.2±3.4 kJ mol⁻¹.     

Thermal oxide synthesis and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanowires

Fe₃O₄ nanorods and Fe₂O₃ nanowires have been synthesized through a simple thermal oxide reaction of Fe with C₂H₂O₄ solution at 200–600°C for 1 h in the air. The morphology and structure of Fe₃O₄ nanorods and Fe₂O₃ nanowires were detected with powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The influence of temperature on the morphology development was experimentally investigated. The results show that the polycrystals Fe₃O₄ nanorods with cubic structure and the average diameter of 0.5–0.8 μm grow after reaction at 200–500°C for 1 h in the air. When the temperature was 600°C, the samples completely became Fe₂O₃ nanowires with hexagonal structure. It was found that C₂H₂O₄ molecules had a significant effect on the formation of Fe₃O₄ nanorods. A possible mechanism was also proposed to account for the growth of these Fe₃O₄ nanorods. Supported by the Fund of Weinan Teacher’s University (Grant No. 08YKZ008), the National Natural Science Foundation of China (Grant No. 20573072) and the Doctoral Fund of Ministry of Education of China (Grant No. 20060718010)     

Generation of fullerenyl radicals and chemiluminescence in the (C<Subscript>60</Subscript>—R<Subscript>3</Subscript>Al)—O<Subscript>2</Subscript> system

Fullerenyl radicals (FR) RC₆₀ ^· and chemiluminescence (CL) are generated in the presence of O₂ in C₆₀—R₃Al (R = Et, Buⁱ) solutions in toluene (T = 298 K). The FR are formed due to the addition of the R^· radical, which is an intermediate of R₃Al autooxidation, to C₆₀. Mass spectroscopy and HPLC were used to identify Et_nC₆₀H_m (n, m = 1–6), Et_pC₆₀ (p = 2–6), and dimer EtC₆₀C₆₀Et as stable products of FR transformations. As found by ESR, the EtC₆₀ ^· radical (g = 2.0037) is also generated by photolysis of solutions obtained after interaction in the (C₆₀— R₃Al)—O₂ system. In the presence of dioxygen, the FR is not oxidized but yields complexes with O₂, which appear as broadening of the ESR signals. Chemiluminescence arising in the (C₆₀—R₃Al)—O₂ system is much brighter (I _max = 1.86·10⁸ photon s⁻¹ mL⁻¹) than the known background CL (I _max = 6.0·10⁶ photon s⁻¹ mL⁻¹) for the autooxidation of R₃Al and is localized in a longer-wavelength spectral region (λ_max = 617 and 664 nm). This CL is generated as a result of energy transfer from the primary emitter ³CH₃CHO* to the products of FR transformation: R_nC₆₀H_m, R_pC₆₀, and EtC₆₀C₆₀Et. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 205–213, February, 2007.