Synthesis and energy-transfer properties of poly(amidoamine) dendrons modified with naphthyl and dansyl groups

Poly(amidoamine) dendrons of 1-3 generations with naphthyl groups at the periphery and a dansyl group at the focal point were synthesized and carefully characterized. Intramolecular energy-transfer properties of these flexible aliphatic-scaffold light-harvesting dendrons were investigated by UV-vis absorption and fluorescence spectroscopy. Efficient energy transfer from the naphthyl groups to the dansyl group occurred for both the first and the second generation dendrons (the energy-transfer efficiency was 94.3% and 76.9%, respectively), whereas the third generation dendron exhibited a low energy-transfer efficiency of 17.8%. The average donor-acceptor distances between the naphthyl and dansyl groups were calculated for different generation dendrons. Different degrees of the backfolding of dendritic branches were used to interpret the different donor-acceptor distances.     

Fluorescence and aggregation behavior of poly(amidoamine) dendrimers peripherally modified with aromatic chromophores: the effect of dendritic architectures

PAMAM dendrimers of the zeroth to fifth generation (G0-5) have been peripherally modified with phenyl, naphthyl, pyrenyl, and dansyl chromophores. Their fluorescence behaviors are strongly affected by the dendritic architectures at different generations. These dendrimers modified with hydrophobic chromphores can self-organize into vesicular aggregates at the low generations G0-3 in water. The size and aggregation number of these vesicles decrease with increasing generation from G0 to G3. Critical aggregation concentration determined by fluorescence spectroscopy reveals that these aggregates can be favorably formed in the order of G3 > G2 > G1. In contrast to the vesicles made from traditional amphiphilic compounds, these dendrimer-based vesicles are very adhesive due to the H-bonding interaction and entanglement of dendritic branches located in the outer layer. A large number of multivesicle assemblies, i.e., "twins" and "quins" consisting of two and five vesicles, were clearly identifiable with transmission electron (TEM) and atomic force microscopy. For the dendrimers with peripheral pyrenyl chromophores, triangle-like vesicles were observed in water. The hydrophobic interphase thickness of the vesicular bilayer is ca. 2.0-3.2 nm determined by fluorescence resonance energy transfer methods, which agrees well with the thickness directly observed with TEM.     

Modification of multi-wall carbon nanotube surfaces with poly(amidoamine) dendrons: synthesis and metal templating

Hydroxyl functional poly(amidoamine) dendron wedges have been reacted with the surface of multi-walled carbon nanotubes and used for templating silver nanoparticles.     

Photoinduced energy transfer in bichromophoric co-assemblies based on amphiphilic poly(amidoamine) dendrons

Spherical co-assemblies were generated from an equivalent-molar-ratio mixture of amphiphilic poly(amidoamine) dendrons that were modified with focal carbazole and/or pyrene chromophores from the first to the third generation (DnCz I and DnPy, where n=1, 2, 3 denotes the generation of dendrons) in water at a concentration of 3.0 x 10(-6) M, lower than the individual critical aggregation concentrations (CAC) of either DnCz I or DnPy. UV-vis absorption and fluorescence emission spectra indicated that fluorescence resonance energy transfer (FRET) from carbazole to pyrene units occurred efficiently within the co-assemblies. Further study implied that part of the carbazole and/or pyrene units stacked homogeneously in the co-assemblies via pi-pi stacking and the dendritic branches served as connectors due to the hydrogen-bonding interaction.     

Cinnamoyl shell‐modified poly(amidoamine) dendrimers

Poly(amidoamine)(PAMAM) dendrimers with a cinnamoyl shell were prepared by reacting full generation PAMAM dendrimers (G=3.0) with 2‐chloroethanol and cinnamoyl chloride, which resulted in densely packed polymerizable unsaturated groups on the periphery. The cinnamoyl shell of the dendrimers dimerized when irradiated under a UV light by using 5‐nitroacenaphthylene as an initiator in dilute dimethylformamide (DMF). FTIR, ¹H NMR, UV‐Vis, SEC, and a viscosity test certified that the photocycloaddition of the cinnamoyl shell of the dendrimers took place within the molecules with the disappearance of double bond signals in the FTIR. ¹H NMR spectra as well as the intrinsic viscosity and polydispersity value of the products both before and after irradiation showed no difference. It was further found that the cinnamoyl shell‐modified dendrimers possessed fluorescence property, and the fluorescence intensity became stronger when the shell was photocyclized under UV‐ irradiation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4147–4153, 2000     

Photodegradation of poly(amidoamine) dendrimers peripherally modified with 1,8-naphthalimide units

This paper presents the photophysical and photochemical characteristics of four new poly(amidoamine) dendrimers of zero and second generation whose periphery has been modified with 1,8-naphthalimide units. Nitro- and allylamino groups have been used as substitutents at the C-4 position of the 1,8-naphthalimide fluorophores. The discussion is focused on the photodegradation of the dendrimers in N,N-dimethylformamide and dioxan solutions. Investigations have shown that the photodegradation of the dendrimers with 4-nitro substituted 1,8-naphthalimide proceed with yellow colour development in the solvent while no colour changes followed the same process in dendrimers with allylamino group substituent. The results also show that the photostability of the dendrimers depends on their generation.     

Photophysical and self‐assembly behavior of poly(amidoamine) dendrons with chromophore as scaffold: The effect of dendritic architecture

Two series of amphiphiles composed of hydrophilic poly(amidoamine) dendrons (from the first to the third generation) as the shell and hydrophobic aromatic chromophores (3,6‐di(maleimidyl)‐9‐phenyl carbazole and 9‐(4′‐maleimidyl phenyl)‐3‐maleimidyl carbazole) as the central scaffold were synthesized. The effect of dendritic architecture on the photophysical properties and the self‐assembly behavior of these amphiphiles were studied by UV–vis absorption spectroscopy, fluorescence spectroscopy, and transmission electron microscopy (TEM) measurements. Both the generation of dendritic shell and the location of dendrons at the chromophoric scaffold had great effect on the photophysical properties of these amphiphiles. In addition, different spherical aggregates were formed from these amphiphiles in the aqueous solution at different concentrations. Because of the combined effects of steric hindrance and architecture of dendritic shells, the amphiphiles from G2 dendron with central chromophore self‐organized into ordered aggregates more readily than that from G1 and G3. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4584–4593, 2008     

Butylamide-terminated poly(amidoamine) dendritic gelators

Butylamide-terminated poly(amidoamine) dendrons with either a Boc group (C-n (n = 1, 2, 3)) or a carboxyl group (E-n (n = 1, 2)) at the focal point, as a new kind of dendritic gelators, were synthesized and their gelation properties were studied by TEM, WAXD, SAXS, NMR,and FTIR spectroscopy. It was found that the structure of focal groups impacted greatly on their gelation ability and the dendrons with higher generations facilitated the gel phase assembly. Hydrogen-bonding and hydrophobic interactions were proved to be the main driving forces responsible for the fibrous assembly with the diameter in the range of 30-100 nm. The molecular packing pattern of the xerogels of C-2, C-3, E-1, and E-2 all showed a lamellar structure, which was revealed by WAXD and SAXS.     

Miscible blends of modified poly(aryl ether ketones) with aromatic polyimides

The phase behavior of binary blends of poly(ether ether ketone) (PEEK), sulfonated PEEK, and sulfamidated PEEK with aromatic polyimides is reported. PEEK was determined to be immiscible with a poly(amide imide) (TORLON 4000T). Blends of sulfonated and sulfamidated PEEK with this poly(amide imide), however, are reported here to be miscible in all proportions. Blends of sulfonated PEEK and a poly(ether imide) (ULTEM 1000) are also reported to be miscible. Spectroscopic investigations of the intermolecular interactions suggest that formation of electron donoracceptor complexes between the sulfonated/sulfamidated phenylene rings of the PEEKs and the n-phenylene units of the polyimides are responsible for this miscibility. © 1993 John Wiley & Sons, Inc.     

Rendering poly(amidoamine) or poly(propylenimine) dendrimers temperature sensitive

The poly(amidoamine) dendrimers having terminal isobutyramide (IBAM) groups were prepared by the reaction of isobutyric acid and the amine-terminated poly(amidoamine) dendrimers with generations (G) of 2 to 5 by using a condensing agent, 1,3-dicyclohexylcarbodiimide. 1H and 13C NMR revealed that an IBAM group was attached to essentially every chain end of the dendrimers. While the IBAM-terminated G2 dendrimer was soluble in water, the IBAM-terminated G3, G4, and G5 dendrimers exhibited the lower critical solution temperatures (LCSTs) at 75, 61, and 43 degrees C, respectively. Because the density of the terminal IBAM groups in the periphery of the dendrimer progressively increases with increasing dendrimer generation, the interaction of the IBAM groups might take place more efficiently, resulting in a remarkable decrease in the LCST. In addition, attachment of IBAM groups to poly(propylenimine) dendrimers could give the temperature-sensitive property, indicating that this is an efficient method to render dendrimers temperature sensitive.     

Poly(oxanorbornenedicarboximide)s dendronized with amphiphilic poly(alkyl ether) dendrons

Attaching dendritically branched side chains to each repeat unit of a linear polymer produces molecular building blocks of nanometer‐sized dimensions called dendronized polymers. The structure of these complex molecular architectures is highly tunable and, therefore, of interest for a wide range of potential applications. The first examples of dendronized polymers prepared by living ring‐opening metathesis polymerization of oxanorbornenedicarboximide macromonomers with poly(alkyl ether) dendrons are reported. Small‐angle X‐ray scattering experiments on bulk samples confirm that the diameter of the individual cylindrical polymers can be tailored by the choice of dendron generation or the length of the hydrocarbon peripheral group. Analysis of the SAXS data based on a core‐shell model indicates that although the diameter of the cylinder increases with generation, the size of the core does not change; this suggests that these dendrons only loosely encapsulate the polymer backbone. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3221–3239     

Capillary electrophoresis of polycationic poly(amidoamine) dendrimers

Generation 2 to generation 5 poly(amidoamine) (PAMAM) dendrimers having different terminal functionalities were analyzed by capillary electrophoresis (CE). Polyacrylamide gel electrophoresis was also used to assess the composition of the individual generations for comparison with the CE results. Separation of PAMAMs can be accomplished by either using uncoated silica or silanized silica capillaries, although reproducibility is poor using the uncoated silica capillary. To improve run-to-run reproducibility, silanized capillary was used and various internal standards were also tested. Relative and normalized migration times of primary amine terminated PAMAM dendrimers were then determined using 2,3-diaminopyridine (2,3-DAP) as an internal standard. Using silanized capillaries and internal standards, the relative and normalized migration times are fully reproducible and comparable between runs. Apparent dimensionless electrophoretic mobilities were determined and the results were compared to theoretical calculations. It is concluded that for PAMAMs a complex separation mechanism has to be considered in CE, where the movement of the ions is due to the electric field, but the separation is rather the consequence of the adsorption/desorption equilibria on the capillary wall ("electrokinetic capillary chromatography"). The described method may be used for quality control and may serve as an effective technique to analyze polycationic PAMAM dendrimers and their derivatives with different surface modifications.     

Electrochemistry of non-redox-active poly(propylenimine) and poly(amidoamine) dendrimers at liquid-liquid interfaces

The electrochemistry of a series of dendrimers was examined at the interface between two immiscible electrolyte solutions (ITIES), enabling study of non-redox-active dendrimers. Different generations of poly(propylenimine) (DAB-AM-n) and poly(amidoamine) (PAMAM) dendrimers were studied. In their protonated states, the dendrimers were transferred across the ITIES, with the electrochemical behavior observed depending on the dendrimer family, the generation number, and the experimental pH. The electrochemistry of the lower generations studied was characterized by well-defined peaks for both dendrimer families and with small peak-peak separations in the case of the PAMAM family. The voltammetry of the higher generations was more complex, showing distorted voltammograms and instability of the interface. The charges of the transferring dendrimers were calculated by convolution of the voltammetric data and were similar to the theoretical charges for DAB-AM-n. For PAMAM, only the lowest generation exhibited reversible behavior, with higher generations having irreversible behavior. Using cyclic voltammetry, low micromolar concentrations of the dendrimers were detected. The results show that electrochemistry at the ITIES can be a useful method for characterization of ionizable dendrimers and that voltammetry can be a simple method for detection of low concentrations of these multicharged species.     

Electrodeposition of Pt nanoclusters on the surface modified by monolayer poly(amidoamine) dendrimer film

Preparation of Pt nanoclusters on the poly(amidoamine) (PAMAM) modified surface by electrodeposition was firstly reported. The presence of PAMAM could affect the growth of Pt nanostructures. Field-emitted scanning microscopy images showed that these nanoclusters were not common nanoparticles but were consisted of many small nanoparticles. The size of them could be controlled and the deposition mechanism was also discussed. This method would give a route of preparing novel nanostructures by electrodeposition.     

Thermosensitive properties of poly(amidoamine) dendrimers with peripheral phenylalanine residues

Dendrimers are unique polymers with globular shapes and well-defined structures. We previously prepared poly(amidoamine) (PAMAM) dendrimers having phenylalanine (Phe) residues at every chain end of the dendrimer as efficient gene carriers. In this study, we found that Phe-derivatized PAMAM dendrimers change their water solubility depending on temperature. The dendrimers were soluble in aqueous solutions at low temperatures, but they became water-insoluble at temperatures above a specific threshold, which is termed the lower critical solution temperature (LCST). Although the LCST of Phe-modified dendrimers decreased with increasing dendrimer generation, these dendrimers exhibited an LCST of 20-30 degrees C under physiological conditions. In addition, the LCST of the dendrimers was controlled by introducing isoleucine (Ile) residues at chain ends of dendrimers at varying ratios with respect to Phe residues. The PAMAM dendrimers are known to encapsulate various drug molecules. For these reasons, temperature-sensitive dendrimers might be useful as efficient drug carriers with controlled size and temperature-responsive properties.     

Synthesis and endosomolytic properties of poly(amidoamine) block copolymers

The poly(amidoamine)s (PAAs) ISA 1 and ISA 23 display pH-dependent conformational change and pH-dependent membrane perturbation. These properties confer potential for use as endosomolytic polymers for intracytoplasmic delivery of toxins and genes. Both polymers are relatively non-toxic, and moreover ISA 23 has the beneficial property in vivo, of being non hepatotropic when administered intravenously. Although ISA 23 and ISA 1 demonstrate ability to transfect cells, ISA 1 is also able to promote intracellular delivery of non-permeant toxins. The aim of this study was to synthesise random and block copolymers of ISA 1 and ISA 23 and investigate whether these second generation hybrids would allow optimisation of PAA biological characteristics. Random and block copolymers of ISA 1 and ISA 23 were synthesised by hydrogen transfer polyaddition to generate a library of PAAs with an ISA 23:ISA 1 molar ratios of 2:1 to 4:1. The resultant polymers have a pI slightly below 7.4 and a M(w) of 19,900-49,000 g/mol and a M(n) of 13,100-24,100 g/mol. Whereas none of the random or block copolymers were haemolytic at pH 7.4 all demonstrated pH-dependent membrane activity. At pH 5.5 they caused 50-60% haemoglobin (Hb) release over 1 h. This was slightly less than that seen for ISA 23 (80% Hb release). None of the copolymers were cytotoxic against B16F10 cells during a 72 h incubation (IC(50) > 2 mg/ml; MTT assay). The ability of the random and block copolymer PAAs to deliver the toxin gelonin was also examined, but only ISA 1 and the block copolymer B2 (ISA 23:ISA 1 at a 2:1 molar ratio) were able to promote intracellular delivery, as measured by cytotoxic activity. It would be interesting to study the body distribution of B2 and determine whether this toxin-delivering PAA is able to escape liver capture.     

Structural analysis of poly(amidoamine) dendrimer immobilized in crosslinked poly(ethylene glycol)

Polymeric membranes comprised of poly(amidoamine) (PAMAM) dendrimer immobilized in a poly(ethylene glycol) (PEG) network exhibit an excellent CO₂ separation selectivity over H₂. The CO₂ permeability increases with PAMAM dendrimer concentration in the polymeric membrane and becomes 500 times greater than H₂ permeability when the dendrimer content was 50 wt % at ambient conditions (5 kPa of CO₂ partial pressure). However, the detailed morphology of the membrane has not been discussed. The immiscibility of PAMAM dendrimer and PEG matrix results in phase separation, which takes place in a couple of microns scale. Especially, laser scanning confocal microscope captures a 3D morphology of the polymeric blend. The obtained 3D reconstructions demonstrate a bicontinuous structure of PAMAM dendrimer‐rich and PEG‐rich phases, which indicates the presence of PAMAM dendrimer channel penetrating the polymeric membrane, and CO₂ will preferentially pass through the dendrimer channel. In addition, Fourier transform of the 3D reconstructions indicates the presence of a periodic structure. An average size of the dendrimer domain calculated is 2–4 μm in proportion to PAMAM dendrimer concentration. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Fluorescence studies of interactions of ionic surfactants with poly(amidoamine) dendrimers

The pyrene fluorescence measurements have been carried out for the micelle formation of sodium dodecyl sulfate (SDS), dodecyltrimethylammonium bromide (DTAB), and dimethylene bis(dodecyldimethylammonium bromide) (12-2-12) in the presence of fixed different amounts of various generations of poly(amidoamine) (PAMAM). The critical micelle concentration (cmc) of SDS decreases with an increase in the fixed amount of PAMAM, suggesting the facilitation of micellization due to the participation of SDS-PAMAM complex in the micelle formation. This behavior has not been observed for DTAB/12-2-12 in the presence of various generations of PAMAM. The results indicate that SDS always has stronger interactions with all the generations of PAMAM in comparison to those of DTAB and 12-2-12.     

Physicochemical properties of quaternized poly(amidoamine) dendrimers with four octyl chains

A cationic dendrimer-type tetrameric surfactant (C(8)qbG0) with four octyl chains and four ammonium groups was synthesized by the reaction of poly(amidoamine) dendrimers with generation of zero and glycidyldimethyloctylammonium bromide. The physicochemical properties of C(8)qbG0 and of their mixtures with sodium dodecyl sulfate (SDS) were characterized by investigating surface tension, electrical conductivity, fluorescence of pyrene, and dynamic light-scattering. The critical micelle concentration (cmc) of C(8)qbG0 was 13 mmol dm(-3) at the concentration of one terminal group and the surface tension at the cmc attained 34 mN m(-1). The occupied area of C(8)qbG0 was 1.94 nm(2) molecule(-1), indicating that the tetrameric dendrimers adsorb widely at the air/water interface. The fluorescence intensity ratio of the first-to-third band in the emission spectra of pyrene for C(8)qbG0 decreased from around the cmc obtained by the surface tension measurement. The hydrodynamic radius of C(8)qbG0 determined by dynamic light-scattering was about 1.3 nm. The addition of SDS to the aqueous solutions of C(8)qbG0 enhanced the surface activities; the mixtures exhibited lower cmc, lower surface tension, and higher solubilization of pyrene than SDS alone. It was found that the mixtures of C(8)qbG0 and SDS form large aggregates due to the interactions between their alkyl chains as well as hydrophilic groups.     

Polyamido amine dendrimers functionalized with poly(phenylenevinylene) dendrons at their periphery

A series of polyamido amine (PAMAM) dendrimers (Generations 2, 3, 4, and 6) fully functionalized at their periphery with first‐ and second‐generation poly (phenylenevinylene) (PPV) dendrons have been efficiently prepared. MALDI‐TOF mass spectrometry proved to be particularly useful for the characterization of the new hybrid dendrimers as well as for the estimation of the average number of PPV dendrons attached to the surface. The optical absorption and emission properties of these systems were studied. The materials display extremely high molar extinction coefficients and emit blue light with only slightly lower fluorescence quantum yields than the corresponding free dendrons. Self‐quenching interactions between PPV units were not observed in THF. However, the luminescence properties underwent a dramatic change when toluene was used as the solvent. The lower polarity of toluene caused shrinkage of the PAMAM structure and brought the PPV chromophores closer together, leading to self‐quenching interactions and excimer formation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6409–6419, 2009