Large amplitude Fourier transformed AC voltammetric investigation of the active state electrochemistry of a copper/aqueous base interface and implications for electrocatalysis

The higher harmonic components available from large-amplitude Fourier-transformed alternating current (FT-ac) voltammetry enable the surface active state of a copper electrode in basic media to be probed in much more detail than possible with previously used dc methods. In particular, the absence of capacitance background current allows low-level Faradaic current contributions of fast electron-transfer processes to be detected; these are usually completely undetectable under conditions of dc cyclic voltammetry. Under high harmonic FT-ac voltammetric conditions, copper electrodes exhibit well-defined and reversible premonolayer oxidation responses at potentials within the double layer region in basic 1.0 M NaOH media. This process is attributed to oxidation of copper adatoms (Cu*) of low bulk metal lattice coordination numbers to surface-bonded, reactive hydrated oxide species. Of further interest is the observation that cathodic polarization in 1.0 M NaOH significantly enhances the current detected in each of the fundamental to sixth FT-ac harmonic components in the Cu*/Cu hydrous oxide electron-transfer process which enables the underlying electron transfer processes in the higher harmonics to be studied under conditions where the dc capacitance response is suppressed; the results support the incipient hydrous oxide adatom mediator (IHOAM) model of electrocatalysis. The underlying quasi-reversible interfacial Cu*/Cu hydrous oxide process present under these conditions is shown to mediate the reduction of nitrate at a copper electrode, while the mediator for the hydrazine oxidation reaction appears to involve a different mediator or active state redox couple. Use of FT-ac voltammetry offers prospects for new insights into the nature of active sites and electrocatalysis at the electrode/solution interface of Group 11 metals in aqueous media.     

Development of an amperometric biosensor for the determination of phenolic compounds in reversed micelles

The possibilities of amperometric enzyme electrodes in reversed micellar systems for the determination of phenol, 4-chloro-3-methylphenol and 2,4-dimethylphenol are illustrated. The used enzymatic reaction consisted of the oxidation of the phenolic compounds by oxygen, catalysed by tyrosinase. The reduction of the liberated quinones was amperometrically detected. The concentration of the components of the reversed micelles, as well as the potential applied to the tyrosinase electrode have been optimized. The stability of the enzyme electrode with time was also evaluated. The effect of the analyte solubility in water upon the analytical performance of the electrode was explored. Advantages of amperometric biosensors in reversed micelles are shown with respect to aqueous media and organic phase enzyme electrodes.     

Electroreduction of molecular oxygen on dispersed copper in an ion-exchange matrix

Electrochemical reduction of molecular oxygen was studied on a [dispersed copper]-[macroporous KU-23 15/100S sulfocation exchanger with various metal concentrations] composite electrode. It was found that a high proton concentration in the ion-exchange matrix causes a decrease in the oxygen reaction overvoltage. The nanostructured state of copper particles causes stabilization of the intermediate product, i.e., hydrogen peroxide. Using the rotating disk electrode method, it was detected that the process is limited by external diffusion of oxygen to composite grains. The oxygen reaction is mostly concentrated on the grain surface and surface layers; oxygen is reduced in the bulk due to dispersed copper oxidation.     

Mechano-elektrochemische Effekte,I. Verschiebung des elektrochemischen Potentials bei plastischer Deformation von Kupfer in wäßrigen Elektrolyten

Potential shifts have been measured in the course of mechanical deformation of copper electrodes in aqueous electrolytes. The potential values depend on the pretreatment of the electrodes, on the composition of the electrolyte and on the rate of deformation. The great influence of the oxygen content on the electrode surface seems evident. The potential values can be interpreted in terms of mixed potentials between an ideal copper electrode reaction and a copper oxide reaction. These findings are, however, not in agreement with the observedpH-stabilities of the electrode surfaces, which extend over apH-range not expected for Cu-Cu₂O-mixtures. It may be anticipated that oxidic superstructures of variable properties are present, which may show semiconductor properties in the immediate surface regions.     

Investigations into the electroreduction of copper(II) ions on chalcocite in ammonia solutions using the rotating disc electrode method

Investigations into the electroreduction of copper(II) ions in ammonia solutions on a disc electrode made of synthetic chalcocite having a deficiency of copper atoms have been presented. It has been concluded that within the range of the diffusion controlled process copper(II) ions are the diffusing substance, at the same time in the course of the reaction two electrons are exchanged. The kinetic parameters for the electroactivating process have been estimated. With a higher concentration of copper in solution an inhibition process has been observed, probably caused by a slow transport rate of the species in the material of the electrode. In the system studied the phenomenon of a partially blocked electrode surface does not occur according to the Landsberg model.     

Cu/Cu2+沉积型电极在流动酸性电解液中的电化学性能

在流动的高浓度硫酸铜酸性溶液中, 研究了H2SO4浓度、 温度和CuSO4浓度对Cu/Cu2+沉积型电极在石墨基体上电化学性能的影响. 结果表明, 沉积型铜电极反应受控于阴极沉积过程, 室温下动力学过程较慢, 但铜沉积致密, 不易形成枝晶和海绵状铜. 适当提高H2SO4和CuSO4浓度及反应温度可降低铜沉积的极化, 改善其动力学特征; 但Cu离子的溶解度受限于H2SO4浓度, CuSO4浓度提升空间有限. 优化电解液组成为2.5 mol/L H2SO4＋0.7 mol/L CuSO4, 反应温度45 ℃. 在此条件下, 铜在石墨基体上沉积/溶解的交换电流密度提高1个数量级, 具有良好的动力学特征, 单电极充放电电压差降低近50%, 能量效率超过80%.     

Adsorptive stripping voltammetric behaviour of mitoxantrone on mercury electrodes

The electrochemical behaviour of mitoxantrone (MXT), an important antineoplastic agent, has been studied at mercury electrodes. The nature of the process taking place at the hanging mercury drop electrode (HMDE) was clarified. The electrochemical behaviour observed was in close agreement with theoretical predictions for an adsorbed molecule which is reversibly reduced. Both the molecule and its reduced product appeared to be adsorbed at the surface of the electrode. Adsorptive stripping voltammetry has been proven to be advantageous over any other assay technique, allowing 5 x 10(-11)M MXT to be detected. The interference arising from surfactants competing for the adsorption sites at the electrode have been studied and the possibility of MXT determination in dilute urine samples has been shown. Some interesting data, such as the MXT adsorbing surface area and the kinetic constant of the associated coupled chemistry reaction were also determined.     

Peroxidase-modified electrodes: Fundamentals and application

Peroxidase-modified amperometric electrodes have been widely studied and developed, not only because of hydrogen- and organic peroxides are important analytes but also because of the key role of hydrogen peroxide detection in coupled enzyme systems, in which hydrogen peroxide is formed as the product of the enzymatic reaction. Many important analytes, such as, aromatic amines, phenolic compounds, glucose, lactate, neurotransmitters, etc. could be monitored by using bi- or multi-enzyme electrodes. In this review the heterogeneous electron transfer properties of peroxidases are discussed as a basis for the analytical application of the peroxidase-modified amperometric electrodes, and examples are given for various peroxidase electrode designs and their application.     

Application of electrochemical reactors for industrial waste-water treatment

The effectiveness of electrochemical reactors for industrial wastewater treatment has been improved since three-dimensional electrodes have been introduced; in fact, limitations of mass transfer can arise, due to the low concentrations of pollutants which may be involved in the process. Three-dimensional electrodes offer a very high electrode area per unit electrode volume and they can act as turbulence promoters or give rise to high linear electrolyte velocity, resulting in high values of mass transport coefficient. However, careful selection of operative parameters is needed in order to obtain high performance. This paper examines the results obtained in our laboratory on the cathodic reduction of copper at RVC electrodes; in particular the interference of dissolved oxygen is studied during the removal of copper from extremely diluted solutions (C < 10 ppm). Some results are also discussed on the removal of organic pollutants by electrochemical oxidation at three-dimensional anode consisting of a fixed bed of carbon pellets.     

电极表面状态对原电池影响的热力学分析

１前言我们知道，超细微粒及其材料具有许多优异的物理化学性质［１～６］；这是因为随着物质分散度的增加，比表面积和表面能也相应增加，从而产生了强烈的表面效应，导致体系在分散状态时的物理化学性质与块状时相比发生了显著变化。我们知道，表面粗糙的金属容易发生电...     

Adsorption of urea on a polycrystalline copper electrode

The adsorption of urea on a polycrystalline copper electrode from 0.01 M NaClO₄ solution has been studied by impedance spectroscopy and radiometric method. The dependence of the surface concentration of urea on the electrode potential and the bulk concentration was determined. From radiometric data, it follows that the adsorption of urea on the copper electrode takes place in the entire range of studied potentials where no faradaic processes occur. In this range, the process of adsorption is practically reversible with respect to the potential and the bulk concentration of urea. The experimental data were described by the Langmuir and the virial isotherms and the Gibbs energy of adsorption were calculated. The data of the urea adsorption on different electrodes have been compared and the role of the kind of the metal on the adsorption process was discussed.     

中性溶液中抗坏血酸在六氰合亚铁酸钴铜膜修饰铂电极上现场红外光谱电化学研究

抗坏血酸 ( AA)是生物化学和生物医学中的一种重要生理物质 ,因而在电催化和电化学传感器领域得到了广泛的研究 .对抗坏血酸的研究主要集中在两个方面 :一方面是研究 AA在各种电极上的电氧化机理、动力学参数及电催化机理 [1,2 ] ;另一方面是为了监测各种生物化学和生物医学中 AA的浓度发展起来的 AA传感器 .利用碳电极的各种预处理方法 [3,4 ]以及利用各种化学修饰电极 [5,6 ]来促进AA的电氧化动力学过程及解决 AA与各种共存物如多巴胺及脲酸等之间的相互干扰问题 .六氰合亚铁酸钴铜修饰电极 ( Co Cu HCF/Pt) [7] 在中性溶液中十分…     

Comparison of copper(II) ion-selective electrodes for measurements at micromolar concentrations

Four types of copper ion-selective electrodes have been tested for determining copper at concentrations below lO^-6 mol 1^l-1. None of the electrodes has a Nemstian response in dilute copper solutions in this concentration range, though their responses are linear in pCu buffer solutions. The causes of the deviations are a direct redox effect in the case of an electrode with a Cu_1.8,Se single crystal membrane, production of copper ions by oxidation of the membrane itself in Ag₂S—CuS membrane electrodes, and a combination of the two in the case of the R??i?ka Selectrode. The electrode potentials are affected by the oxygen content and pH of the sample solution and the condition of the membrane surface. Precision tests on two types of electrode are described.     

Release of copper from commercial solid-state copper ion-selective electrodes

The release of copper from two commercial solid-state cupric ion-selective electrodes [Orion 94-29 Cupric Electrode (I) and Radiometer F1112 Selectrode (II)] was measured by immersion in the following media: 0.1M potassium nitrate (pH = 4.7), 0.5M sodium chloride (pH = 4.7) and 0.1M nitric acid. In the 0.1M potassium nitrate medium, the amount of copper released from both electrodes causes interference when they are used for the determination of cupric ion at the 10⁻⁷M level. In comparison with the 0.1M potassium nitrate medium, the copper release in the 0.5M sodium chloride and 0.1M nitric acid media was increased for electrode II but not for electrode I. The release of copper was not affected by removal of oxygen from the media but can be substantially lowered by coating the electrodes with a thin cation-exchange membrane (Nafion). The mechanism of copper dissolution is investigated.     

Lead-selective electrodes based on lead(IV) oxide

Lead(IV) oxide electrodes are shown to give near-theoretical calibration slopes for lead(II) ions over the range 10^?3–10^?5 mol l^?1, and to have near-theoretical standard potentials in different acidic media. They are compared with lead sulphide-silver sulphide membrane electrodes and shown to be more tolerant of acidity and copper(II), mercury(II) and iron(III) ions. Iron(II) and manganese(II), however, interfere significantly. Some of the advantages of the lead(IV) oxide electrode are brought out in the determination of the solubility product of lead sulphate; implications for constructing phosphate- and sulphate-sensitive electrodes are mentioned.     

Variability of selectivity coefficients of solid-state ion-selective electrodes

The generalized model for the selectivity mechanism of solid-state ion-selective electrodes has been experimentally verified. The experimental parameters investigated were the concentration of interfering ion, temperature and stirring. Among the systems studied were electrodes sensitive to chloride (bromide, iodide), bromide (chloride, iodide), iodide (chloride, bromide), silver (copper, lead), copper (silver, lead) and lead (silver, copper), the species given in brackets being considered as the interferents. The model has been confirmed except for cases where the concentration of ions formed at the electrode surface by metathesis is too small to be the factor that dictates the electrode potential.     

Extending the dynamic range of electrochemical sensors using multiple modified electrodes

Multiple electrodes, combined with a chemometric strategy to calibrate the measurement response, have been used for the determination of an analyte across a broader dynamic range than is possible with a single electrode. The model system used for the detection of copper comprised electrodes modified with a self-assembled monolayer. The electrodes were modified with the copper-complexing species (3-mercaptopropionic acid, thioctic acid, and the peptides cysteine and Gly-Gly-His) and copper was determined over concentrations ranging from nanomolar to millimolar using voltammetric analysis. We have demonstrated that by combining the calibration functions from the four electrodes a better estimate (i.e. with smaller variance) of the concentration of the analyte is obtained. Measurement uncertainty is expressed for independently prepared electrodes, which allows the possibility of commercial production and factory calibration. The principles of using multiple electrodes modified with recognition elements with different affinities for the target analyte to extend the dynamic range of sensors is a general one that could be applied to other analytes.     

Copper-modified gold electrode specific for monosaccharide detection Use in amperometric determination of phenylmercury based on invertase enzyme inhibition

The electrochemical oxidation of mono- and disaccharides at various copper-modified electrodes is reported: glassy carbon modified at open circuit or by electrochemical deposition of copper, gold modified by electrochemical deposition, and at bulk copper electrodes. A comparative study of these four electrodes was made by linear sweep voltammetry and amperometry. The maximum oxidation peak separation between disaccharides and monosaccharides is about 200 mV. After optimization, amperometric determination of monosaccharides was done at +0.30 versus Ag/AgCl in 0.15 M NaOH at the copper-modified gold electrode.

Using the developed method, the enzymatic activities of invertase and β-galactosidase were determined through their reaction with sucrose and lactose, respectively. Validation was carried out by a spectrophotometric method based on 3,5-dinitrosalicylic acid, and it was shown that the proposed electrochemical method is more sensitive.

The analytical utility of the copper-modified gold electrode was tested for the determination of organic mercury. Addition of phenylmercury standards to the invertase solution caused a decrease in the enzyme activity, and allowed the determination of phenylmercury in pharmaceutical samples. The concentration has been determined in the 10–55 ng ml⁻¹ range.     

Electrochemical Detection of Protons Produced in an Electrode Reaction Using Interdigitated Microarray Electrodes

This work describes the use of interdigitated array electrodes (IDAE) for proton detection. Methanol electrooxidation in sulfuric acid solution was exemplified. Reduction currents originating in the reaction product generated by methanol electrooxidation on a Pt generator electrode were observed at the Pt collector electrode, the potential of which was fixed in the hydrogen evolution region. In order to reduce the background current of hydrogen evolution, an Hg‐plated Pt collector electrode was fabricated. Compared to the Pt collector electrode, the reduction current observed at the Hg collector electrode was extremely small. The product detected was found to be a proton from the current responses observed at Pt and Hg collector electrodes.