The effect of first-stage polymer Tg on the morphology and thermomechanical properties of structured polymer latex particles

A series of heterogeneous latexes having stage ratios of 40:60 between the first and second stage polymers were prepared by emulsion polymerization. The first-stage polymers were non-polar S-BuA with T_gs ranging from + 100 °C to + 20 °C and the second stage polymer was polar MMA–BuA–MAA having a T_g of 20 °C. The latex particle morphologies were studied using TEM and the thermomechanical properties of the resulting latex films were studied with DSC and DMA. Calculated diffusion rates for propagating species during the reactions were correlated to the observed morphologies and to the amount of interphase in the latex particles. To cite this article: O.J. Karlsson et al., C. R. Chimie 6 (2003).     

Maleic diamide polymerizable surfactants. Applications in emulsion polymerization

A series of new polymerizable non-ionic and ionic surfactants (surfmers) with amides groups on both sides of the C=C double bonds have been prepared upon reaction of maleic isoimide carrying a long alkyl chain (or a benzyl group) with a hydrophilic amine derivative. Their critical micellar concentration (CMC) was measured with a surface tensiometer. They have been engaged in batch emulsion polymerization of styrene, and semi-batch seeded copolymerization of styrene and butyl acrylate, giving stable latexes during the polymerization process, and upon extraction with ethanol, showing a high rate of incorporation at the particle surface. However these surfmers do not confer good steric stabilization properties, which may be expected from the use of non-ionic surfactants. To cite this article: I. Klimenkovs et al., C. R. Chimie 6 (2003).     

Emulsion and dispersion polymerization of styrene in the presence of PEO macromonomers with p-vinylphenylalkyl end groups

Poly(ethylene oxide) (PEO) macromonomers with α-p-vinylphenylalkyl (propyl, pentyl, and hexyl) and ω-hydroxy end groups were applied to emulsion and dispersion polymerization of styrene as reactive emulsifiers and dispersants in water and in methanol-water mixture (9:1 v/v), respectively. Nearly monodisperse microspheres of submicron to micron size were obtained. Particle size in the emulsion system was one or half order of magnitude smaller than that in the dispersion system, while in both systems the size decreased approximately according to minus one half power of the macromonomer concentration in weight. The particle size was substantially independent on the PEO chain length and also on the spacer alkyl chain length of the α-polymerizing end group. The total weight of the PEO chains incorporated by copolymerization into the particle surfaces (shells), relative to that of styrene polymerized into the particle cores, appears to be a key factor for controlling the particle size. To cite this article: K. Landfester et al., C. R. Chimie 6 (2003).     

Poly(N-ethylmethacrylamide) thermally-sensitive microgel latexes: effect of the nature of the crosslinker on the polymerization kinetics and physicochemical properties

Thermally-sensitive crosslinked submicronic particles were prepared by an emulsion/precipitation process of N-ethylmethacrylamide (NEMAM), using potassium persulphate as initiator and four different crosslinkers; ethylene glycol dimethacrylate (EGDMA), 1,3-butanediol dimethacrylate (1,3-BDDMA), 1,4-butanediol dimethacrylate (1,4-BDDMA) and tetraethylene glycol dimethacrylate (TEGDMA). At first, polymerization kinetics was studied by NMR, revealing the negligible effect of the crosslinker nature. On the contrary, the water-soluble polymer amounts, the final hydrodynamic particle size, the swelling ability, the electrokinetic properties were found to be dependent upon the nature of crosslinker. The final latexes were found to be narrowly size distributed irrespective of the crosslinker agent’s chemical nature. In this study, the water solubility of the cross-linker was reported to be an important criterion, but other factors, such as diffusion and reactivity, have to be taken into consideration. To cite this article: P. Hazot et al., C. R. Chimie 6 (2003).     

Hybrid copolymer latexes cross-linked with methacryloxy propyl trimethoxy silane. Film formation and mechanical properties

We describe in this work the copolymerization reaction of 3-trimethoxysilyl propyl methacrylate (MPS) with styrene (Styr.) and n-butyl acrylate (BuA) monomers through emulsion polymerization. The so-produced hybrid copolymer (P(BuA-co-MPS)) and terpolymer (P(Styr-co-BuA-co-MPS)) latexes were cast into films that displayed a good optical transparency. The copolymers microstructure in the films was characterized by FTIR, ¹³C and ²⁹Si solid state NMR spectroscopies, and was found to be highly dependent on parameters such as the monomer feed composition, the suspension pH and the silane addition profile. The films obtained from the hybrid latexes showed improved dynamic mechanical properties indicating that a reinforcing organo-mineral network had formed in the composite materials. The dynamic modulus of the hybrids increased with increasing silane contents while, concurrently, the tan δ peak shifted to higher temperatures, broadened and decreased in intensity. To cite this article: S. Vitry et al., C. R. Chimie 6 (2003).     

Recent progress in nitroxide-mediated polymerizations in miniemulsion

Recent developments in nitroxide-mediated polymerizations conducted in emulsion and miniemulsion have advanced the field across a range of both experimental and theoretical fronts. This article reviews progress in bicomponent initiating systems (including use of camphorsulfonic acid to enhance rate), unimolecular initiating systems, miniemulsions not requiring the use of volatile costabilizers, polymerization of acrylates, mathematical modeling and simulation, and theoretical understanding with regards to issues such as compartmentalization, preservation of polymer chain livingness, the role of aqueous phase kinetics and phase partitioning. These topics are discussed and analyzed to present an integrated portrait of the current status of nitroxide-mediated polymerizations in emulsion/miniemulsion and to identify the most pressing concerns, issues, and opportunities. To cite this article: M.F. Cunningham, C. R. Chimie 6 (2003).     

Cosurfactant effects on the microemulsion polymerization of styrene

The polymerization of styrene in o/w microemulsions stabilized with dodecyltrimethylammonium bromide (DTAB) with or without cosurfactant (n-butanol, n-hexanol or n-octanol) is examined here. The addition of a cosurfactant enhances the one-phase region in the order: n-butanol > n-hexanol > n-octanol. The kinetics of polymerization slows down in the presence of the alcohol. With the alcohol, the molar masses increase, but no particular trend was noticed on particle size of the lattices. However, by changing the surfactant counter-ion to chloride, alcohol effects on the kinetics almost vanish. Possible explanations to these results are given here. To cite this article: J.E. Puig et al., C. R. Chimie 6 (2003).     

Anionic surfmers in mini-emulsion polymerisation

Mini-emulsion polymerisation of styrene or methylmethacrylate, initiated with ammonium persulphate, have been carried out, in the presence of hexadecane or of polymethylmethacrylate as hydrophobic costabilizer, and the simple hemiester of linear dodecyl alcohol and maleic anhydride, or polymerisable surfactants (surfmers) derived from the condensation of succinic anhydride and either hydroxy propylmethacrylate (MAES), or hydroxyethylmethacrylate (ABS). While the pure surfmers have not so good surface activity, from surface tension measurements, stable mini-emulsion droplets are obtained using a mixture with low amounts of SDS, which have diameters of about 100–200 nm, which remain stable upon polymerisation. Most of the surfmers remain grafted onto the particle surface, thus conferring to these particles strong stability in the various tests. However, due to the high water solubility of the surfmers, another part remains in the serum as unconverted monomer or water-soluble polymers. To cite this article: A. Guyot et al., C.R. Chimie 6 (2003).     

Lavoisier and meat stock

Antoine-Laurent de Lavoisier published his results on ‘meat stock’ preparation in 1783. Measuring density, he stated that ‘food principles’ were better extracted using a large quantity of water. This result was checked. To cite this article: H. This et al., C. R. Chimie 9 (2006).     

Synthesis of polydimethylsiloxane microemulsions by self-catalyzed hydrolysis/condensation of dichlorodimethylsilane

The preparation of PDMS microemulsions was carried out by adding at controlled rate dichlorodimethylsilane (DCMS) in a solution of sodium dodecylpolyoxyethylene(8) sulphate. The instantaneous hydrolysis of DCMS and subsequent condensation of the corresponding dihydroxysilane generate dispersions of cyclosiloxanes of small lengths (4 to 6 D units). The high load of chloride ions released during the hydrolysis step requires the presence of the above-mentioned electrosteric surfactant to avoid rapid coagulation of the dispersion. In addition, its sulphate end-group captures a proton that catalyses the ring-opening polymerization of cyclosiloxane as well as the polycondensation of disilanol PDMS chains. Final particles exhibit a diameter of about 50 nm for a polydispersity index of less than 1.1. They are constituted of PDMS chains exclusively linear ( ; ) and of small cycles in low contents (less than 5 wt% in the best conditions). To cite this article: G. Palaprat, F. Ganachaud, C. R. Chimie 6 (2003).     

Application of phosphorus- and nitrogen-containing organic compounds for the isolation of actinides and technetium from acid or basic aqueous solutions

The derivatives of ethers of phosphoric acid, namely O-(2-alkyl) (diethylcarbamoylmethyl) phenylphosphinates (O2ADECMPP), were synthesized and tested for liquid–liquid extraction of transuranium elements, lanthanides and technetium in meta-nitrobenzotrifluoride or 1,2-dichlorethane from acidic solutions. The O-(ethylhexyl) (diethylcarbamoylmethyl) phenylphosphinate (O2EHDECMPP) was used to prepare chelating granulated sorbents. The family of chelating fibrous ‘filled’ sorbents POLYORGS-type shows, according to preliminary experiments, that Pu and Tc at concentrations around 10^–5 M can be recovered almost completely. POLYORGS show fast kinetics for sorption processes. To cite this article: G.V. Myasoedova et al., C. R. Chimie 7 (2004).

Résumé

Utilisation de réactifs phosphorés et azotés pour la séparation des actinides et du technétium de milieux acides et basiques. Des dérivés de l’éther de l’acide phosphorique du type O-2-alkyl diéthylcarbamoylméthyl phénylphosphonates ont été préparés et testés pour extraire des éléments transuraniens, des lanthanides et du technétium dans le meta-nitrobenzène ou le 1,2-dichloroéthane, à partir de solutions aqueuses acides. Le dérivé O-éthylhexyl diethylcarbamoylméthyl phénylphosphonate a été utilisé pour préparer des échangeurs solides par effet de chélation. La famille des chélatants fibreux Polyorgs montre, dans des expériences préliminaires, que Pu et Tc, à des concentration de l’ordre de 10^–5 M, peuvent être complètement récupérés à partir de milieux acides contenant d’autres éléments. Ces composés présentent des cinétiques de sorption très rapides. Pour citer cet article : G.V. Myasoedova et al., C. R. Chimie 7 (2004).     

Viscoelastic behaviour of butyl acrylate/styrene/2-hydroxyethyl methacrylate/acrylic acid latices thickened with associative thickeners

The rheological behaviour of butyl acrylate/styrene/acrylic acid latices thickened with a hydrophobically modified ethoxylated polyurethane (HEUR) or hydrophobically modified alkali-soluble polyacrylate emulsion (HASE) was investigated. While the pseudoplastic character of frequency dependence of complex viscosity was similar for both thickeners, viscoelastic behaviour, expressed as the ratio of loss and storage moduli, significantly differed, indicating that the HEUR molecules, unlike swollen HASE particles, create a viscoelastic space structure. The increase in hydrophilicity of the particle surface, achieved by incorporation of 2-hydroxyethyl methacrylate (HEMA) monomer into the latex copolymer reduced the viscoelasticity of latices thickened with HEUR, but not of those thickened with HASE. This confirms that adsorption of hydrophobic end-groups on particle surface is important for thickening of latices with HEUR and that a physical network of latex particles interconnected by the thickener macromolecules is formed. To cite this article: O. Quadrat et al., C. R. Chimie 6 (2003).     

Polymer phase separation in composite latex particles. 1. Considerations for the nucleation and growth mechanism

This study addresses the question of how polymer phase separation takes place during polymerization reactions within composite latex particles. Experiments resulted in acrylic/styrene latices with two-phase structures that were analyzed via TEM. Those that resulted from the use of semi-batch reactions allowed us to observe domains that likely did not undergo phase rearrangement after they were formed within the particles. We computed the critical size of the phase-separated domains by assuming that the nucleation and growth mechanism applied to such experiments. We also computed how much these domains would increase in size by subsequent polymerization within those domains. Comparisons of predicted and experimental domain sizes and distributions showed quite reasonable agreement. The domains formed in latex particles of about 350 nm were in the 30–50-nm range. Despite the close agreement between theory and experiment, we are not convinced that phase separation occurs by nucleation and growth, as it appears to us that given the relative rates of reaction and polymer diffusion, phase separation events will often be forced to occur within the spinodal region of the phase diagram. To cite this article: J.M. Stubbs, C. R. Chimie 6 (2003).     

Solid-state synthesis of boron subnitride, B6N: myth or reality?

Solid-state synthesis of boron subnitride, B₆N, as a result of chemical interaction between boron and boron nitride at 7.5 GPa and 1700 °C has been previously reported by Hubert et al. However, a critical analysis of the results has shown that the evidence for the formation of boron subnitride with B₆O-like structure is inconclusive. We have studied in situ the interaction between boron and BN at the same p–T conditions using X-ray diffraction with synchrotron radiation. At 7.4 GPa and 1700 °C the formation of a new phase has not been observed. At the same time, HP–HT treatment has resulted in strong and unpredictable preferred orientation of boron crystallites. This leads to the rise of some weak boron reflections that might be erroneously attributed to the appearance of a new phase. To cite this article: V.L. Solozhenko et al., C. R. Chimie 9 (2006).     

Stoichiometry of uranyl hydrolysis reaction in acidic aqueous solutions from the evidence of oxygen exchange kinetics

The kinetics of uranyl oxygen exchange with water molecules in aqueous solutions was studied in the pH range 1–4 and uranium concentration range 10^–4–0.1 M. It was confirmed that the exchange is stimulated by hydrolyzed uranyl species. From the evidence of data on the kinetics of uranyl oxygen exchange the reaction stoichiometry of uranyl hydrolysis was determined. The scheme of uranyl hydrolysis involving formation of (UO₂)₂(OH)₂²⁺, (UO₂)₂(OH)₃⁺, and other hydrolyzed species was proposed. To cite this article: L.G. Mashirov et al., C. R. Chimie 336 (2004).

Résumé

Étude de l'hydrolyse de l'uranium hexavalent en milieu acide par échange isotopique de l'oxygène. L'échange isotopique de l'oxygène de l'ion uranyle avec les molécules d'eau a été étudié dans le domaine de pH de 1 à 4 et de concentration en uranium de 10^–4 à 0,1 M. Cet échange a lieu par l'intermédiaire d'espèces hydrolysées de U(VI). La stoechiométrie des formes hydrolysées de U(VI) est déduite des vitesses d'échange isotopique. En particulier, les espèces (UO₂)₂(OH)₂²⁺ et (UO₂)₂(OH)₃⁺ ont été clairement identifiées. Un schéma d'hydrolyse est proposé. Pour citer cet article : L.G. Mashirov et al., C. R. Chimie 336 (2004).     

Reversible adsorption of spherical particles from binary mixtures: long-time behaviour

Formation of monolayers of spherical particles in processes with reversible adsorption from mixtures of large and small particles was simulated in computer experiments. Computer program was based on an algorithm that took into account random sequential adsorption, desorption and lateral diffusion of adsorbed particles (RSA–DLD model). Computer experiments were performed for systems with rate constants of particle adsorption at least 10³ times higher than rate constants of desorption. In processes with very fast adsorption and slow desorption, formation of monolayer can be divided into two stages. During the first stage, the total surface coverage (the coverage with particles of both types) increases very fast and becomes very close to that at equilibrium. During the second stage, the total coverage changes very slowly and the system approaches equilibrium mainly by the replacement of large particles with the small ones. A simple kinetic model for evolution of the monolayer composition during the second stage has been proposed. Kinetic equations related to this model allow the determination of large particles’ desorption rate constants on the basis of changes in the surface concentrations of adsorbed large and small microspheres. The validity of the model has been tested comparing large particles’ desorption rate constants values that had been used for simulations with values of the corresponding rate constants determined using analytical equations, with a view to analysing the simulation results. To cite this article: S. Slomkowski et al., C. R. Chimie 6 (2003).     

Effect of the surfactant concentration on the kinetics of oil in water microemulsion polymerization: a case study with butyl acrylate

A comprehensive investigation of aqueous microemulsion polymerization of butyl acrylate at high surfactant concentrations by means of reaction calorimetry and dynamic light scattering revealed unexpected results with regard to polymerization kinetics and colloidal properties of the final latexes. Particularly, with increasing surfactant concentrations, a decrease in the overall rate of polymerization accompanied by an increasing incubation time of the polymerization and increasing average particle sizes in the final latexes has been observed. Based on reviewing former results on microemulsions and microemulsion polymerizations published in the open literature and the presentation of new experimental results an attempt is made to explain the experimental results consistently with a particle nucleation mechanism based on the classical nucleation theory. To cite this article: K. Tauer et al., C. R. Chimie 6 (2003).     

Research and application of inorganic selective sorbents at Mayak PA

This work has been performed in order to identify selective inorganic sorbents for caesium and strontium. Thin-layer sorbents with nickel ferrocyanide embedded in an inert matrix were found to be the best for caesium. Sorbents including non-stoichiometric manganese dioxide were selected for strontium. Bench tests have been carried out on the purification of desalted water of SNF storage-pool from ¹³⁷Cs, and on the purification of contaminated natural water from ⁹⁰Sr. The facility for synthesizing the ferrocyanide sorbent with the registered mark ‘Seleks-CFN’ has been brought into operation. The sorbent ISM-S seems promising for ⁹⁰Sr decontamination. To cite this article: M.V. Logunov et al., C. R. Chimie 7 (2004).

Résumé

Recherches et applications sur l’utilisation de sorbants spécifiques à Mayak. Des sorbants sélectifs du césium et du strontium ont été identifiés. Pour le césium, le meilleur s’avère être le ferrocyanure de nickel, s’il est utilisé sous forme de couche mince. Pour le strontium, on a sélectionné des composés non stœchiométriques de dioxyde de manganèse. On a mené des tests visant à épurer en césium l’eau des piscines d’entreposage des combustibles nucléaires usagés, et en strontium des eaux contaminées. Une installation industrielle permettant de préparer le sorbant à base de ferrocyanure de marque « Seleks-CFN » a été réalisée. Le sorbant ISM-S semble prometteur pour la décontamination en strontium. Pour citer cet article : M.V. Logunov et al., C. R. Chimie 7 (2004).     

Unprecedented μ3-O face-capping ligand in a [Mo6Br6L2Br6] (L = 0.5 O + 0.5 Br) molybdenum cluster unit: crystal structure of the Cs3Mo6Br13O oxybromide

The new Cs₃Mo₆Br₁₃O oxybromide, synthesized by solid-state chemistry, crystallizes in the trigonal system (Rc space group; a = 15.5784(2) Å, c = 19.5103(5) Å, V = 4100.5(1) Å³ and Z = 6). It is based on a [Mo₆L₁₄] unit that contains an unprecedented μ₃ face-capping oxygen. The crystal structure determined by single crystal X-ray diffraction is built up from discrete face-capped [Mo₆Brⁱ₆Lⁱ₂Br^a₆]^3– (L = 0.5 O + 0.5 Br) anionic units in which two inner positions are randomly occupied by one bromine and one oxygen whereas the other ligand positions are fully occupied by bromine. The cesium cations randomly occupy two close crystallographic positions generated by the A-B-C-A′-B′-C′ close-packed stacking of the units. The cesium site occupancy is related to the random distribution of oxygen and bromine on the Lⁱ inner positions. To cite this article: K. Kirakci et al., C. R. Chimie 8 (2005).     

Speciation methods of actinides in trace concentrations

The development of actinide speciation methods in the environment is discussed. The results on speciation and migration of radionuclides in near-surface and deep conditions at the Krasnoyarsk mining and chemical plant and at the Production Association ‘Mayak’ (southern Ural) are reported. For surface conditions, the mobile plutonium fraction is mostly associated with inorganic complexes (carbonate) of the higher plutonium oxidation state, while less mobile fraction is associated with low-soluble Pu(IV) complexes with humic acids. The mobile fraction of americium consists of complexes with low molecular weight fulvic acids of non-specific nature with molecular weights lower than 10 kDa. Plutonium and americium behaviour in deep conditions is governed by colloid migration. To cite this article: A.P. Novikov et al., C. R. Chimie 7 (2004).

Résumé

Méthodes de spéciation des actinides en traces. Le développement de méthodes pour la spéciation des actinides dans l’environnement est discuté. Nous présentons des résultats concernant la spéciation et la migration des radionucléides dans des conditions de sub-surface et en milieux géologiques profonds à la mine de Krasnoyarsk et à l’usine chimique de Mayak (Oural du Sud). En conditions de sub-surface, la fraction mobile contient essentiellement des complexes inorganiques (carbonates) de Pu dans ses degrés d’oxydation élevés, tandis que la fraction moins mobile contient des complexes insolubles du Pu(IV), avec des acides humiques. La fraction mobile de Am comporte des complexes d’acides fulviques de nature non précisée, mais d’une masse molaire inférieure à 10 kDa. En conditions de milieu profond, le comportement de Am et de Pu est influencé par la migration des colloïdes. Pour citer cet article : A.P. Novikov et al., C. R. Chimie 7 (2004).