Hyperfine structures of the 2 (3)Sigma(g) (+), 3 (3)Sigma(g) (+), and 4 (3)Sigma(g) (+) states of Na(2)

The hyperfine structures of the 2 (3)Sigma(g) (+), 3 (3)Sigma(g) (+), and 4 (3)Sigma(g) (+) states of Na(2) have been resolved with sub-Doppler continuous wave perturbation facilitated optical-optical double resonance spectroscopy via A (1)Sigma(u) (+) approximately b (3)Pi(u) mixed intermediate levels. The hyperfine patterns of these three states are similar. The hyperfine splittings of the low rotational levels are all very close to the case b(betaS) limit. As the rotational quantum number increases, the hyperfine splittings become more complicated and the coupling cases become intermediate between cases b(betaS) and b(beta J) due to spin-rotation interaction. We present a detailed analysis of the hyperfine structures of these three (3)Sigma(g) (+) states, employing both case b(betaS) and b(beta J) coupling basis sets. The results show that the hyperfine splittings of the (3)Sigma(g) (+) states are mainly due to the Fermi-contact interaction. The Fermi contact constants for the two d sigma Rydberg states, the 2 (3)Sigma(g) (+) and 4 (3)Sigma(g) (+), are 245+/-5 MHz and 225+/-5 MHz, respectively, while the Fermi contact constant of the s sigma 3 (3)Sigma(g) (+) Rydberg state is 210+/-5 MHz. The diagonal spin-spin and spin-rotation constants, and nuclear spin-electronic spin dipolar interaction parameters of the 3 (3)Sigma(g) (+) and 4 (3)Sigma(g) (+) states are also obtained.     

Interactions in the Quinary System H2O-Y(NO3)3-La(NO3)3-Pr(NO3)3-Nd(NO3)3 to Very High Concentrations

Isopiestic measurements have been carried out for the quinary system H₂O-Y(NO₃)₃-La(NO₃)₃-Pr(NO₃)₃-Nd(NO₃)₃ at 298.15 K to near saturation. The measurements can be represented within experimental uncertainty over the full concentration range by a modified Pitzer ion-interaction model extending to the C ⁽³⁾ term. In addition, the system obeys the Zdanovskii–Stokes–Robinson model or partial ideal solution model within the accuracy of the isopiestic measurements, indicating zero interchange energy between the unlike salts, which is consistent with the nature of trivalent rare-earth elements.     

Analysis of the intermolecular interaction between CH(3)OCH(3), CF(3)OCH(3), CF(3)OCF(3), and CH(4): high level ab initio calculations

The intermolecular interaction energies of the CH₃OCH₃? CH₄, CF₃OCH₃? CH₄, and CF₃OCF₃? CH₄ systems were calculated by ab initio molecular orbital method with the electron correlation correction at the second order Møller–Plesset perturbation (MP2) method. The interaction energies of 10 orientations of complexes were calculated for each system. The largest interaction energies calculated for the three systems are ?1.06, ?0.70, and ?0.80 kcal/mol, respectively. The inclusion of electron correlation increases the attraction significantly. It gains the attraction ?1.47, ?1.19, and ?1.27 kcal/mol, respectively. The dispersion interaction is found to be the major source of the attraction in these systems. In the CH₃OCH₃? CH₄ system, the electrostatic interaction (?0.34 kcal/mol) increases the attraction substantially, while the electrostatic energies in the other systems are not large. Fluorine substitution of the ether decreases the electrostatic interaction, and therefore, decreases the attraction. In addition the orientation dependence of the interaction energy is decreased by the substitution. © 2002 Wiley Periodicals, Inc. J Comput Chem 23: 1472–1479, 2002     

Tris(tris(trimethylsilyl)silyl)gallium,Ga{Si(Si(CH3)3)3}3

The title compound has been prepared in good yield by the reaction of gallium trichloride with base‐free hypersilyl lithium (Li–Si(SiMe₃)₃, Me = CH₃) in a 1 : 3 molar ratio. Ga(Si(SiMe₃)₃)₃ is monomeric in solution and in the solid state. The compound has been characterized with NMR, IR and Raman techniques as well as by an X‐ray structure determination (planar GaSi₃‐skeleton, monoclinic space group P2₁/c, Z = 4, d(Ga–Si) = 249,8 ± 0,2 pm).     

LiMn3(SeO3)2(HSeO3)6

The title compound, lithium trimanganese bis­[trioxo­selenate(IV)] hexa­kis[hydrogentrioxoselenate(IV)], is built up from a vertex‐sharing network of distorted Mn^IIIO₆ octa­hedra, SeO₃ and HSeO₃ pyramids and unusual Li(OH)₆ octa­hedra, resulting in a dense three‐dimensional structure. Mn, Li and one Se atom have site symmetries of , , and 3, respectively. An O—H⋯O hydrogen bond helps to establish the crystal packing.     

Syntheses and structures of the infinite chain compounds Cs(4)Ti(3)Se(13), Rb(4)Ti(3)S(14), Cs(4)Ti(3)S(14), Rb(4)Hf(3)S(14), Rb(4)Zr(3)Se(14), Cs(4)Zr(3)Se(14), and Cs(4)Hf(3)Se(14)

The alkali metal/group 4 metal/polychalcogenides Cs(4)Ti(3)Se(13), Rb(4)Ti(3)S(14), Cs(4)Ti(3)S(14), Rb(4)Hf(3)S(14), Rb(4)Zr(3)Se(14), Cs(4)Zr(3)Se(14), and Cs(4)Hf(3)Se(14) have been synthesized by means of the reactive flux method at 823 or 873 K. Cs(4)Ti(3)Se(13) crystallizes in a new structure type in space group C(2)(2)-P2(1) with eight formula units in a monoclinic cell at T = 153 K of dimensions a = 10.2524(6) A, b = 32.468(2) A, c = 14.6747(8) A, beta = 100.008(1) degrees. Cs(4)Ti(3)Se(13) is composed of four independent one-dimensional [Ti(3)Se(13)(4-)] chains separated by Cs(+) cations. These chains adopt hexagonal closest packing along the [100] direction. The [Ti(3)Se(13)(4-)] chains are built from the face- and edge-sharing of pentagonal pyramids and pentagonal bipyramids. Formal oxidation states cannot be assigned in Cs(4)Ti(3)Se(13). The compounds Rb(4)Ti(3)S(14), Cs(4)Ti(3)S(14), Rb(4)Hf(3)S(14), Rb(4)Zr(3)Se(14), Cs(4)Zr(3)Se(14), and Cs(4)Hf(3)Se(14) crystallize in the K(4)Ti(3)S(14) structure type with four formula units in space group C(2)(h)()(6)-C2/c of the monoclinic system at T = 153 K in cells of dimensions a = 21.085(1) A, b = 8.1169(5) A, c = 13.1992(8) A, beta = 112.835(1) degrees for Rb(4)Ti(3)S(14);a = 21.329(3) A, b = 8.415(1) A, c = 13.678(2) A, beta = 113.801(2) degrees for Cs(4)Ti(3)S(14); a = 21.643(2) A, b = 8.1848(8) A, c = 13.331(1) A, beta = 111.762(2) degrees for Rb(4)Hf(3)S(14); a = 22.605(7) A, b = 8.552(3) A, c = 13.880(4) A, beta = 110.919(9) degrees for Rb(4)Zr(3)Se(14); a = 22.826(5) A, b = 8.841(2) A, c = 14.278(3) A, beta = 111.456(4) degrees for Cs(4)Zr(3)Se(14); and a = 22.758(5) A, b = 8.844(2) A, c = 14.276(3) A, beta = 111.88(3) degrees for Cs(4)Hf(3)Se(14). These A(4)M(3)Q(14) compounds (A = alkali metal; M = group 4 metal; Q = chalcogen) contain hexagonally closest-packed [M(3)Q(14)(4-)] chains that run in the [101] direction and are separated by A(+) cations. Each [M(3)Q(14)(4-)] chain is built from a [M(3)Q(14)] unit that consists of two MQ(7) pentagonal bipyramids or one distorted MQ(8) bicapped octahedron bonded together by edge- or face-sharing. Each [M(3)Q(14)] unit contains six Q(2)(2-) dimers, with Q-Q distances in the normal single-bond range 2.0616(9)-2.095(2) A for S-S and 2.367(1)-2.391(2) A for Se-Se. The A(4)M(3)Q(14) compounds can be formulated as (A(+))(4)(M(4+))(3)(Q(2)(2-))(6)(Q(2-))(2).     

(23)Na multiple-quantum MAS NMR of the perovskites NaNbO(3) and NaTaO(3)

The distorted perovskites NaTaO(3) and NaNbO(3) have been studied using (23)Na multiple-quantum (MQ) MAS NMR. NaTaO(3) was prepared by high temperature solid state synthesis and the NMR spectra are consistent with the expected room temperature structure of the material (space group Pbnm), with a single crystallographic sodium site. Two samples of NaNbO(3) were studied. The first, a commercially available sample which was annealed at 900 degrees C, showed two crystallographic sodium sites, as expected for the room temperature structure of the material (space group Pbcm). The second sample, prepared by a low temperature hydrothermal method, showed the presence of four sodium sites, two of which match the expected room temperature structure and the second pair, another polymorph of the material (space group P21ma). This is consistent with powder X-ray diffraction data which showed weak extra peaks which can be accounted for by the presence of this second polymorph. Density functional theory (DFT) calculations support our conclusions, and aid assignment of the NMR spectra. Finally, we discuss the measured NMR parameters in relation to other studies of sodium in high coordination sites in the solid state.     

Gas-phase ion chemistry in the ternary SiH(4)-C(3)H(6)-PH(3) system

Propene-phosphine and the silane-propene-phosphine gaseous mixtures were studied by ion trap mass spectrometry. For the binary mixture the variation of ion abundances under different partial pressures and the mechanisms of ion-molecule reactions are reported. Moreover, the rate constants of the main processes were measured and compared with the collisional rate constants to determine the reaction efficiencies. In the ternary silane-propene-phosphine mixture the mechanisms of formation of Si(m)C(n)P(p)H(+)(s) ion clusters were elucidated, but the complexity of the system and the low abundances of the ions usually isolated by successive steps prevented the determination of rate constants. The hydrogenated ternary ions are mainly formed by reactions of Si(r)P(s)H(+)(t) ions with propene, whereas a minor contribution comes from reactions of Si(m)C(n)H(+)(p) ions with phosphine. The C(v)P(w)H(+)(z) ions show very low reactivity with silane. The formation processes of these species are discussed in relation to their possible role as precursors of amorphous silicon carbides doped with phosphorus obtained by deposition from properly activated silane-propene-phosphine mixtures.     

First-principles study of the (001) surface of cubic SrHfO(3) and SrTiO(3)

We have performed first-principles calculations on the (001) surface of cubic SrHfO(3) and SrTiO(3) with SrO and BO(2) (B = Ti or Hf) terminations. Surface structure, partial density of states, band structure, and surface energy have been obtained. For the BO(2)-terminated surface, the largest relaxation appears on the second-layer atoms but not on the first-layer ones. The analysis of the structure relaxation parameters reveals that the rumpling of the (001) surface for SrHfO(3) with SrO termination is stronger than that for SrTiO(3). For the HfO(2)-terminated surface of SrHfO(3), the surface state appears near the M point of its band structure.     

Spectroscopic properties of Er(3+)/Yb(3+) co-doped Bi(2)O(3)-B(2)O(3)-GeO(2) glasses

Er(3+)/Yb(3+) co-doped 60Bi(2)O(3)-(40 - x)B(2)O(3)-xGeO(2) (BBG; x=0, 5, 10, 15 mol%) glasses that are suitable for fiber lasers, amplifiers have been fabricated and characterized. The absorption spectra, emission spectra, and lifetime of the (4)I(13/2) level and quantum efficiency of Er(3+):(4)I(13/2) --> (4)I(15/2) transition were measured and calculated. With the substitution of GeO(2) for B(2)O(3), both Delta lambda(eff) and sigma(e) decrease from 75 to 71 nm and 9.88 to 8.12 x 10(-21) cm(2), respectively. The measured lifetime of the (4)I(13/2) level and quantum efficiency of Er(3+):(4)I(13/2) --> (4)I(15/2) transition increase from 1.18 to 1.5 ms and 36.2% to 43.2%, respectively. The emission spectra of Er(3+):(4)I(13/2) --> (4)I(15/2) transition was also analyzed using a peak-fit routine, and an equivalent four-level system was proposed to estimate the stark splitting for the (4)I(15/2) and (4)I(13/2) levels of Er(3+) in the BBG glasses. The results indicate that the (4)I(13/2) --> (4)I(15/2) emission of Er(3+) can be exhibit a considerable broadening due to a significant enhance the peak A, and D emission.     

Theoretical study on the reaction of SiH(CH(3))(3) with SiH(3) radical

The multiple-channel reactions SiH(3) + SiH(CH(3))(3) --> products are investigated by direct dynamics method. The minimum energy path (MEP) is calculated at the MP2/6-31+G(d,p) level, and energetic information is further refined by the MC-QCISD (single-point) method. The rate constants for individual reaction channels are calculated by the improved canonical variational transition state theory with small-curvature tunneling correction over the temperature range of 200-2400 K. The theoretical three-parameter expression k(T) = 2.44 x 10(-23)T(3.94) exp(-4309.55/T) cm(3)/(molecule s) is given. Our calculations indicate that hydrogen abstraction channel R1 from SiH group is the major channel because of the smaller barrier height among five channels considered.     

The Lewis basicity of the [Pt3(μ-CO)3(PR3)3] clusters and the X-ray crystal structure of [{ZnI2}{Pt3(μ-CO)3(PPh(i-Pr)2)3}]

The cluster compounds [Pt₃(μ-CO)₃(PR₃)₃] act as Lewis bases towards the metal halides of Group XI, MX, Group XII, MX₂, and Group XIII, MX₃, to form cluster compounds of the composition [{MX_n}{Pt₃(μ-CO)₃(PR₃)₃}]. The X-ray crystal structure, NMR and IR data are given for the compound [{ZnI}{Pt₃(μ-CO)₃(PPh(i-Pr)₂)₃}].     

Doping gamma-Fe(2)O(3) nanoparticles with Mn(III) suppresses the transition to the alpha-Fe(2)O(3) structure

Here we report on a mixed oxide system, gamma-Fe2O3 nanoparticles doped with Mn(III), where the transition from the cubic to the more stable hexagonal alpha-Fe2O3 structure is suppressed. When amorphous Fe2O3 is heated at 300 degrees C for 3 h, ferrimagnetic gamma-Fe2O3 is observed as the sole product. On the other hand, when the temperature is raised to 500 degrees C, one observes only antiferromagnetic alpha-Fe2O3 as the product. However, upon doping with 8.5 wt % Mn(III), the amorphous nanoparticles crystallized to mainly the gamma-Fe2O3 matrix after heating at 500 degrees C for 3 h, and need to be heated to >650 degrees C for the complete transition to the alpha-Fe2O3 structure to take place.     

Schwingungsspektren und Kraftkonstanten der Übergangsreihen OP(N(CH3)2)3 – OP(CH3)3 und SP(N(CH3)2)3 – SP(CH3)3

Vibrational Spectra and Force Constants of the Series OP(N(CH₃)₂)₃ – OP(CH₃)₃ and SP(N(CH₃)₂)₃ – SP(CH₃)₃ The vibrational spectra (IR and Raman) of the compounds of the title series are recorded and assigned to the normal vibrations. By a simplified force field the valence force constants are calculated and discussed. The results are compared with those of the NMR spectroscopy.     

Li(VO2)3(TeO3)2

The title compound, lithium tris[dioxidovanadium(V)] bis[trioxidotellurium(IV)], contains chains of edge‐sharing distorted VO₆ octahedra. The pyramidal TeO₃ groups crosslink the chains into sheets. Finally, an Li⁺ cation adopting an unusual capped trigonal–bipyramidal LiO₆ geometry bridges the layers to complete a three‐dimensional structure.     

On the Synthesis and Characterization of Pd (CO) (PPh3)3

Pd (CO) (PPh₃)₃ could be isolated from the reaction mixture arising from cyclohexene hydrocarboxylation by PdCl₂ (PPh₃)₂ as the catalyst precursor; furthermore, it has also been prepared through direct reaction of Pd (PPh₃)₄ with CO in benzene. For this complex, ³¹P- and ¹³C-NMR. spectra suggest a rapid dissociation of PPh₃ at room temperature and a tetrahedral structure at – 70° in solution.     

Synthesis and characterization of the phosphorus triazides OP(N3)3 and SP(N3)3

Two explosive triazides of phosphorus(V), OP(N(3))(3) and SP(N(3))(3), have been prepared as neat substances and structurally characterized. Both compounds can be handled in gas, liquid, and solid states in submillimolar quantities. The melting points of OP(N(3))(3) and SP(N(3))(3) are +22 and -30 °C, respectively. The two triazides have been characterized by IR (Ar matrix and gas phase) and Raman (solid) spectroscopies. Their single-crystal structures were obtained by X-ray diffraction and found to be significantly distorted from the predicted ideal C(3) symmetry because of intermolecular interactions. The spectroscopic and structural properties are discussed in combination with density functional theory calculations.