Self-assembly of chiral trans-cyclobutane-containing β-dipeptides into ordered aggregates

Two chiral synthetic β-dipeptides have been constructed, one with two trans-cyclobutane residues and the other with one trans and one cis fragment, 1 and 2, respectively, and investigated to get insight into the non-covalent interactions responsible for their self-assembly to form ordered aggregates, as well into parameters such as their morphology and size. Experimental evidence of the formation of these assemblies was provided by spectroscopy, microscopy and X-ray diffraction experiments that suggest the formation of nanoscale helical aggregates. This process involves a conformational change in the molecules of each dipeptide with respect to the preferred conformation of the isolated molecules in solution. A high-resolution NMR spectroscopy study allowed the determination of the dynamics of the gelation process in [D(8)]toluene and the sol-gel transition temperature, which was around 270 K in this solvent at a concentration of 15 mM. NMR spectroscopy experiments also provided some information about conformational changes involved in the sol-gel transition and also suggested a different gel packing for each dipeptide. These observations have been nicely explained by computational studies. The self-assembly of the molecules has been modelled and suggested a head-to-head molecular arrangement for 1 and a head-to-tail arrangement for 2 to give helical structures corresponding to hydrogen-bonded single chains. These chains interact with one another in an antiparallel way to afford bundles, the significant geometry parameters of which fit well to the main peaks observed in wide-angle X-ray diffraction spectra of the aggregates in the solid state.     

Interaction forces between particles stabilized by a hydrophobically modified inulin surfactant

The adsorption isotherm of a hydrophobically modified inulin (INUTEC SP1) on polystyrene (PS) and poly(methyl methacrylate) (PMMA) particles was determined. The results show a high affinity isotherm for both particles as expected for a polymeric surfactant adsorption. The interactions forces between two layers of the hydrophobically modified inulin surfactant adsorbed onto a glass sphere and plate was determined using a modified atomic force microscope (AFM) apparatus. In the absence of any polymer, the interaction was attractive although the energy of interaction was lower than predicted by the van der Waals forces. The results between two layers of the adsorbed polymer confirms the adsorption isotherms results and provides an explanation to the high stability of the particles covered by INUTEC SP1 at high electrolyte concentration. Stability of dispersions against strong flocculation could be attributed to the conformation of the polymeric surfactant at the solid/liquid interface (multipoint attachment with several loops) which remains efficient at Na(2)SO(4) concentration reaching 1.5 mol dm(-3). The thickness of the adsorbed polymer layer in water determined both by AFM and rheology measurements, was found to be about 9 nm.     

Viscoelastic properties of polystyrene and poly(methyl methacrylate) dispersions sterically stabilized by hydrophobically modified inulin (polyfructose) polymeric surfactant

Recently, steric repulsive forces induced by a new graft copolymer surfactant, which is based in inulin (polyfructose), have been described. Previous investigations by atomic force microscopy between solid surfaces covered with adsorbed surfactant indicated strong repulsive forces even at high electrolyte concentration, due to the steric repulsion produced by the surfactant hydration. In the present paper, the colloidal stabilization provided by this surfactant is studied by rheology. The measurements were carried out on sterically stabilized polystyrene (PS) and poly(methyl methacrylate) (PMMA) containing adsorbed surfactant (INUTEC SP1). Steady-state shear stress as a function of shear rate curves was established at various latex volume fractions. The viscosity volume fraction curves were compared with those calculated using the Doughtry-Krieger equation for hard sphere dispersions. From the experimental eta r-phi curves the effective volume fraction of the latex dispersions could be calculated and this was used to determine the adsorbed layer thickness Delta. The value obtained was 9.6 nm, which is in good agreement with that obtained using atomic force microscopy (AFM). Viscoelastic measurements of the various latex dispersions were carried out as a function of applied stress (to obtain the linear viscoelastic region) and frequency. The results showed a change from predominantly viscous to predominantly elastic response at a critical volume fraction (phi c). The effective critical volume fraction, phi eff, was calculated using the adsorbed layer thickness (Delta) obtained from steady-state measurements. For PS latex dispersions phi eff was found to be equal to 0.24 whereas for PMMA phi eff=0.12. These results indicated a much softer interaction between the latex dispersions containing hydrated polyfructose loops and tails when compared with latices containing poly(ethylene oxide) (PEO) layers. The difference could be attributed to the stronger hydration of the polyfructose loops and tails when compared with PEO. This clearly shows the much stronger steric interaction between particles stabilized using hydrophobically modified inulin.     

Organogels from a vitamin C-based surfactant

A new double chained surfactant, 2-octyl-dodecanoyl-6-O-ascorbic acid (8ASC10), with a L-ascorbic acid unit as the polar headgroup was synthesized for the first time. The behavior of the compound in the dry solid state has been characterized through DSC, XRD, and SAXS measurements. The surfactant forms stable viscous organogels in the presence of suitable organic solvents and also water-induced organogels upon addition of water to the organogel. These mixtures show shear-thinning properties and are birefringent. The behavior and properties of the organogels have been studied through rheology, DSC, and SAXS experiments. The organogels possess the same antioxidant properties of the original L-ascorbic acid ring and can be used to solubilize and protect valuable organic molecules.     

Molecularly ordered inorganic frameworks in layered silicate surfactant mesophases.

Self-assembled lamellar silica-surfactant mesophase composites have been prepared with crystal-like ordering in the silica frameworks using a variety of cationic surfactant species under hydrothermal conditions. These materials represent the first mesoscopically ordered composites that have been directly synthesized with structure-directing surfactants yielding highly ordered inorganic frameworks. One-dimensional solid-state 29Si NMR spectra, X-ray diffraction patterns, and infrared spectra show the progression of molecular organization in the self-assembled mesophases from structures with initially amorphous silica networks into sheets with very high degrees of molecular order. The silicate sheets appear to be two-dimensional crystals, whose structures and rates of formation depend strongly on the charge density of the cationic surfactant headgroups. Two-dimensional solid-state heteronuclear and homonuclear NMR measurements show the molecular proximities of the silica framework sites to the structure-directing surfactant molecules and establish local Si-O-Si bonding connectivities in these materials.     

Studies of the association of chitosan and alkylated chitosan with oppositely charged sodium dodecyl sulfate

Cationic biopolymer chitosan has many applications in food, cosmetic and pharmaceutical industries. Grafting alkylated chains on its backbone can hydrophobically modify this water-soluble polymer.This paper concerns unmodified chitosan, alkylated chitosan and their interactions with a model anionic surfactant, sodium dodecyl sulfate (SDS). The solvent is pH 4 acetic acid solution. The purpose of this study is to highlight the hydrophobicity brought by the alkylated chains by comparing surface tension measurements and rheological properties of hydrophobically modified polymer (HMP) and chitosan solutions at 25 °C.Interactions of chitosan and HMP with surfactant have also been investigated giving information about surface activity and electrical conductivity of such systems. It results that alkylated chitosan/SDS system is more surface active than chitosan/SDS and it offers new potential applications in pharmaceutical and cosmetic fields because of the formation of amphiphilic complexes.     

Thermal properties of the gel made by low molecular weight gelator 1,2-O-(1-ethylpropylidene)-alpha-D-glucofuranose with toluene and molecular dynamics of solvent

The studies of the gel-to-sol phase transition by the Raman, FT-IR, and 1H NMR methods of the gel made by low molecular weight organogelator 1,2-O-(1-ethylpropylidene)-alpha-D-glucofuranose with toluene as the solvent are reported. The FT-IR spectra revealed the existence of a hydrogen bond network formed by gelator molecules in the crystalline and gel phase. In both phases, the network formation is dominated by the gelator self-interaction. Upon gelation, only one stretching band of infrared absorption modes nualpha, assigned to the O(6)H hydroxyl protons of gelator, is shifted by Deltaupsilonalpha = 25 cm-1, which indicates the involvement of this proton in the interaction with the solvent molecules. The phase transition measurements performed as a function of gelator concentration allowed the calculation of the energy correlated with the transition from gel to solution phase. The obtained value of 72 kJ/mol is the largest one reported up until now for monosaccharide-based gels. The analysis of the temperature measurements of the toluene 1H NMR spectra provides evidence for a different chemical environment of toluene molecules in the gel. The toluene spin-lattice relaxation in bulk and gel indicate that the viscosity is most likely the main factor that influences the dynamics of toluene.     

Interfacial Dilational Properties of Hydrophobically Modified Partly Hydrolyzed Polyacrylamide and Anionic Surfactants at the Water-Decane Interface

The dilational viscoelastic properties of hydrophobically modified partly hydrolyzed polyacrylamide and anionic surfactants (4,5-diheptyl-2-propylbenzene sulfonate and gemini surfactant C₁₂COONa-p-C₉SO₃Na) in the absence or presence of electrolyte have been investigated at the decane–water interface by means of longitudinal method and the interfacial tension relaxation method. Experimental results show that at low surfactant concentration, the increase of the dilational modulus by the addition of surfactant molecules at low frequency might be explained by the mix-adsorption of the polymer chains and surfactant molecules. At the same time, polymer chain could sharply decrease the dilational modulus of surfactant film mainly due to the weakening of the strong interactions among long alkyl chains in surfactant molecules. At high surfactant concentration, the addition of surfactant molecules can decrease the dilational modulus of polymer solution due to the fast process involving in the exchange of surfactant molecules between the interface and the mixed complex formed by surfactant molecules and hydrophobic micro-domains. The added electrolyte, which results in screening of electrostatic interactions between the ionized groups, generally increases the frequency dependence of the interfacial dilational modulus. The data obtained on the relaxation processes via interfacial tension relaxation measurements can explain the results from oscillating barriers measurements very well.     

Low viscosity reversed hexagonal mesophases induced by hydrophilic additives

This study reports on the formation of a low viscosity H(II) mesophase at room temperature upon addition of Transcutol (diethylene glycol mono ethyl ether) or ethanol to the ternary mixture of GMO (glycerol monooleate)/TAG (tricaprylin)/water. The microstructure and bulk properties were characterized in comparison with those of the low viscosity HII mesophase formed in the ternary GMO/TAG/water mixture at elevated temperatures (35-40 degrees C). We characterized the role of Transcutol or ethanol as inducers of disorder and surfactant mobility. The techniques used were rheology, differential scanning calorimetry (DSC), wide- and small-angle X-ray scattering (WAXS and SAXS, respectively), NMR (self-diffusion and (2)H NMR), and Fourier transform infrared (FTIR) spectroscopies. The incorporation of either Transcutol or ethanol induced the formation of less ordered HII mesophases with smaller domain sizes and lattice parameters at room temperature (up to 30 degrees C), similar to those found for the GMO/TAG/water mixture at more elevated temperatures (35-40 degrees C). On the basis of our measurements, we suggest that Transcutol or ethanol causes dehydration of the GMO headgroups and enhances the mobility of the GMO chains. As a result, these two small molecules, which compete for water with the GMO polar headgroups, may increase the curvature of the cylindrical micelles and also perhaps reduce their length. This results in the formation of fluid H(II) structures at room temperature (up to 30 degrees C). It is possible that these phases are a prelude to the H(II)-L(2) transformation, which takes place above 35 degrees C.     

Aromatic molecules in restricted geometries: pyrene excimer formation in an anchored bilayer

The galleries of an anionic clay, Mg-Al Layered Double Hydroxide (Mg-Al LDH) have been functionalized by intercalating the anionic surfactant do-decyl sulfate. Within the galleries, the alkyl chains of the surfactant adopt a bilayer structure with the sulfate headgroup anchored to the inorganic sheet. Pyrene molecules have been solubilized in the anchored bilayer by partitioning from polar solvents. The presence of pyrene molecules induces conformational disorder in the alkyl chains of the bilayer and more importantly inhibits the rotational disordering motion of the sulfate headgroup. Pyrene fluorescence indicates formation of excimers whose intensity increases with concentration of solubilized pyrene indicating that they are mobile. Pyrene solubilized in the anchored bilayer exhibits unusual phenomena; on evacuation the excimer band disappear but reappears on releasing vacuum. It is shown that this behavior arises due to the loss of water of hydration of the headgroup on evacuation and as a consequence the pyrene moves into the less polar interior of the bilayer where it is immobile and can no longer diffuse and form excimers. The motion of pyrene into the interior of the bilayer creates free space near the surfactant chain termini, which manifests in the disappearance of the methyl-rocking mode of the ordered (-tt) end-chain conformer in the Raman spectra.     

Aromatic molecules in restricted geometries: photophysics of naphthalene included in a cyclodextrin functionalized layered solid

The galleries of an Mg-Al layered double hydroxide have been functionalized by intercalation of carboxymethyl beta-cyclodextrin cavities. The anchored cavities form a random array of identical-sized hydrophobic nanopockets arranged in a bilayer fashion in the interlamellar space of the layered solid. Naphthalene molecules have been included within these cavities by partitioning from a polar solvent. The fluorescence from the included naphthalene shows an unusual behavior--the excimer to monomer emission intensity decreases with increasing concentration of included naphthalene. This is shown to be a consequence of the absence of translational mobility of the naphthalene--cyclodextrin adduct in the functionalized solid. Two types of included naphthalene have been identified: a preformed excimer-like species characterized by the absence of rise time in decay measurements and a monomeric species that is incapable of excimer formation due to the absence of suitably located included naphthalenes in its proximity. The concentration of each species and the enthalpy for excimer formation have been determined from the temperature variation of fluorescence intensities.     

聚甲基丙烯酸甲酯接枝聚氧乙烯共聚物溶液性质的研究

采用核磁共振 (NMR)、动态激光光散射 (DLS)、透射电子显微镜 (TEM )等方法研究了规整性聚甲基丙烯酸甲酯接枝聚氧乙烯共聚物溶液性质 ,研究表明两亲接枝共聚物在选择性溶剂中可形成球状胶束 ,溶液的浓度、温度和聚合物结构等因素影响其胶束的大小、形态     

Structure and rheology of reverse micelles in dipentaerythrityl tri-(12-hydroxystearate)/oil systems

We report the formation of reverse rod-like micelles and their rheological properties in novel nonionic surfactant, dipentaerythrityl tri-(12-hydroxystearate) (designated as WO-6)/oil systems without external water addition. Small-angle X-ray scattering (SAXS) was used to investigate the structure of the micelles and their flow properties were studied by rheological measurements. We found that WO-6 spontaneously self-assembles into reverse micelles in a variety of organic solvents at ambient conditions, their structure depending on solvent molecular architecture, surfactant concentration, and temperature. Rod-like micelles with a maximum length of ca. 12 nm and a cross section diameter of ca. 2 nm were observed in cyclohexane. When cyclohexane was replaced with a linear chain octane, the length and the cross section diameter were simultaneously increased. With a further increase of hydrocarbon chain length of solvent oils from octane to hexadecane, the rod-like micelles grew axially, keeping the cross section diameter (ca. 3 nm) virtually constant. Increasing surfactant concentration also favored one-dimensional micellar growth. On the other hand, micelles shrunk with the rise of temperature, which is similar to a rod-to-sphere transition, and is essentially the opposite temperature dependence to that often observed in aqueous micellar systems. A structural picture drawn by SAXS is well supported by rheology; the relative (zero-shear) viscosity of the WO-6/oil systems was found to be markedly greater than that expected for a dispersion of spherical particles due to the elongated micellar structure, despite quantitative inconsistency with semi-empirically predicted values for rigid rod-like particles.     

Inclusion of poly-aromatic hydrocarbon (PAH) molecules in a functionalized layered double hydroxide

The internal surface of an Mg-Al layered double hydroxide has been functionalized by anchoring carboxy-methyl derivatized β-cyclodextrin cavities to the gallery walls. Neutral polyaromatic hydrocarbon (PAH) molecules have been included within the functionalized solid by driving the hydrophobic aromatic molecules from a polar solvent into the less polar interior of the anchored cyclodextrin cavities by a partitioning process. The optical (absorption and emission) properties of the PAH molecules included within the functionalized Mg-Al layered double hydroxide solid are similar to that of dilute solutions of the PAH in non-polar solvents. The unique feature of these hybrid materials is that they are thermally stable over a wide temperature range with their emission properties practically unaltered. Dedicated to Prof J Gopalakrishnan on his 62nd birthday.     

Long-Term Colloidally Stable Aqueous Dispersions of ≤5 nm Spinel Ferrite Nanoparticles

Applications in biomedicine and ferrofluids, for instance, require long-term colloidally stable, concentrated aqueous dispersions of magnetic, biocompatible nanoparticles. Iron oxide and related spinel ferrite nanoparticles stabilized with organic molecules allow fine-tuning of magnetic properties via cation substitution and water-dispersibility. Here, we synthesize≤5 nm iron oxide and spinel ferrite nanoparticles, capped with citrate, betaine and phosphocholine, in a one-pot strategy. We present a robust approach combining elemental (CHN) and thermal gravimetric analysis (TGA) to quantify the ratio of residual solvent molecules and organic stabilizers on the particle surface, being of particular accuracy for ligands with heteroatoms compared to the solvent. SAXS experiments demonstrate the long-term colloidal stability of our aqueous iron oxide and spinel ferrite nanoparticle dispersions for at least 3 months. By the use of SAXS we approved directly the colloidal stability of the nanoparticle dispersions for high concentrations up to 100 g L⁻¹.     

Vesicle--biopolymer gels: networks of surfactant vesicles connected by associating biopolymers

The effect of adding an associating biopolymer to surfactant vesicles and micelles is studied using rheology and small-angle neutron scattering (SANS). The associating polymer is obtained by randomly tethering hydrophobic alkyl chains to the backbone of the polysaccharide, chitosan. Adding this polymer to surfactant vesicles results in a gel; that is, the sample transforms from a Newtonian liquid to an elastic solid having frequency-independent dynamic shear moduli. SANS shows that the vesicles remain intact within the gel. The results suggest a gel structure in which the vesicles are connected by polymer chains into a three-dimensional network. Vesicle-polymer binding is expected to occur via the insertion of polymer hydrophobes into the vesicle bilayer. Each vesicle thus acts as a multifunctional junction in the network structure. Significantly, gel formation does not occur with the native chitosan that has no hydrophobes. Moreover, adding the hydrophobically modified chitosan to a viscous sample containing wormlike micelles increases the viscosity further but does not give rise to a gel-like response. Thus, the formation of a robust gel network requires both the presence of hydrophobes on the polymer and vesicles in solution.     

Temperature quenched DODAB dispersions: fluid and solid state coexistence and complex formation with oppositely charged surfactant

Dilute dispersions of the synthetic bilayer forming double-chained cationic lipid dioctadecyldimethylammonium bromide (DODAB) were investigated. In dispersions sonicated above the chain melting temperature Tm (approximately 45 degrees C) it was found by H NMR that about 50% of the surfactant chains remained fluid when the samples were cooled to room temperature, which is 20 degrees C below Tm. In contrast, there was no sign of a fluid fraction in unsonicated samples at room temperature. The addition of the anionic surfactant sodium dodecyl sulfate (SDS) to DODAB dispersions at room temperature resulted in the formation of an essentially stoichiometric DODA-DS complex with frozen chains, as seen by titration calorimetry and H NMR experiments. For sonicated samples, turbidity experiments demonstrated that, after a fast complexation reaction, the system remains colloidally stable unless the SDS-to-DODAB mixing ratio is too close to unity. H NMR experiments also showed that in the unreacted DODAB the fraction of fluid chains remained close to 50%, indicating either that SDS reacts equally fast with fluid and frozen DODAB or that there is a relaxation of the fluid fraction after the complexation. The melting enthalpy and the melting temperature of the alkyl chains rise gradually as the mixing ratio increases. We observed with cryo-TEM that the fraction of large unilamellar vesicles was significantly larger after addition of SDS. This indicates vesicle fusion. Based on both wide- and small-angle X-ray scattering patterns, the structure of the equimolar SDS-DODAB complex at 25 degress C was proposed to be lamellar.     

Gels of hydrophobically modified hydroxyethyl cellulose cross-linked by amylose. Competition with cyclodextrin

Previous work has shown that amylose (AM) can cross-link hydrophobically modified polymers by inclusion complexation, whereby thermoreversible cold-setting gels are formed. In this work, the competition between AM and cyclodextrin (CD) for the formation of inclusion complexes with hydrophobically modified hydroxyethyl cellulose (HMHEC) is investigated. A detailed study of viscosity, NMR self-diffusion, and chemical shifts of the two-component mixture, CD and HMHEC, was performed. The results imply that 2:1 (CD:polymer hydrophobe) complexes may be formed. The three-component mixtures, HMHEC/AM/CD, were investigated by rheology, NMR self-diffusion, and intensities of the NMR resonance peaks. The CD molecules competed efficiently with the AM molecules, as seen by a decreased storage modulus, an increased self-diffusion of AM and HMHEC, and increased NMR intensities of the HMHEC hydrophobes, as the concentration of CD increased in the solution. A high concentration of CD is needed in the mixtures to inhibit all interactions between HMHEC and AM, and it was shown that there still is an effect of AM at excess CD concentration in the mixtures.     

Interaction of cationic liposomes with cell membrane models

The colloidal dispersion stability of nano-sized graphene sheets in supercritical fluid (SCF) media is very important for developing SCF-based exfoliation and dispersion technologies for stabilization and solubilization of graphenes. We carried out molecular dynamics simulations to elucidate the stability mechanism of graphene in supercritical CO(2) (scCO(2)). The potential of mean force (PMF) between two graphene nanosheets in scCO(2) was simulated, and the effect of scCO(2) density and temperature on the PMF behavior has been investigated. The simulation results demonstrate that there exists a free energy barrier between graphenes in the scCO(2) fluid, possibly obstructing the aggregation of graphenes. The single-layer confined CO(2) molecules between the graphene sheets can induce a dominating repulsion interaction between graphene sheets. At higher scCO(2) fluid density, there are more confined CO(2) molecules within the interplate regions, resulting in a stronger repulsive free energy barrier. The effect of temperature on the PMF is relatively minor. The scCO(2) solvent structure shows layered confined arrangement in the interfacial region near the graphene nanosheets, which is correlated well with the PMF profile curve.     

Hydrophobized polysaccharide macrogel formed by addition of surfactants

Solution properties of an aqueous mixture of cholesterol-bearing pullulan (CHP) and an ionic surfactant, sodium dodecyl sulfate (SDS) or dodecyltrimethylammonium chloride (DoTAC), were studied. The mixture forms gel or sol depending on the polymer-surfactant composition. Because the unmodified pullulan/surfactant/water mixture does not show any gel formation at all over the composition range studied, the hydrophobic cholesterol moieties play an essential and important role in the gel formation. The phase behavior could be interpreted by formation of mixed micelles between cholesterol moieties of CHP and the surfactants. This was supported also by SAXS studies in the sol region. Rheological measurements of the gel showed that viscoelastic response of the CHP/SDS gel was controlled by at least two different processes with shorter and longer relaxation times. This was different from previously reported results for a system such as hydrophobically modified (hydroxyethyl)cellulose (HMHEC) and SDS.