Gas-sensitivity properties of nanoscale Au-In<Subscript>2</Subscript>O<Subscript>3</Subscript> materials

A possibility was demonstrated of producing the chemical sensors based on Au-In₂O₃ obtained using a sol-gel technology. The sensors exhibit high sensitivity and selectivity toward CO. The differences in gas-sensitivity properties of In₂O₃ sensor with respect to CO and CH₄ at different ways of doping with Au(III) was examined. The effect of the gold nanoparticles size and the state of the indium oxide surface on the characteristics of Au-In₂O₃ and Au/In₂O₃ sensors at the detection of CO and CH₄ was examined.     

Synthesis,molecular, crystal and electronic structure of [RuCl<Subscript>2</Subscript>(PPh<Subscript>3</Subscript>)<Subscript>2</Subscript>(3,5-Me<Subscript>2</Subscript>HPz)<Subscript>2</Subscript>]

The reaction of [RuCl₂(PPh₃)₃] complex with dimethylpyrazole has been examined. A new ruthenium complex—[RuCl₂(PPh₃)₂(3,5-Me₂HPz)₂] has been obtained and characterized by IR, ¹H NMR and UV-VIS measurements. Crystal and molecular structure of the complex has been determined. The electronic structure of the complex has been calculated by TDDFT method.     

Interaction of solid electrolyte La<Subscript>0.88</Subscript>Sr<Subscript>0.12</Subscript>Ga<Subscript>0.82</Subscript>Mg<Subscript>0.18</Subscript>O<Subscript>2.85</Subscript> with hydrogen,water vapor,and carbon dioxide

The air,Au/La_0.88Sr_0.12Ga_0.82Mg_0.18O_2.85/Au,air cells are studied by an impedancemetry method before and after a week-long exposure at 700°C to atmospheres of hydrogen, humid air, and carbon dioxide. Blank specimens of the same electrolyte are examined by methods of x-ray diffraction, Raman scattering (RS), and x-ray photoelectron spectroscopy. The fact that the shape of the RS spectra and the shape of the electrode impedance dispersion alter unequivocally suggests that, at the very least, the electrode surface interacts with all the gases. The interaction in question is reversible in the case of hydrogen and carbon dioxide. In the case of water vapor, the interaction is irreversible.Translated from Elektrokhimiya, Vol. 41, No. 2, 2005, pp. 198–205.Original Russian Text Copyright © 2005 by Shkerin, Kovyazina, Beresnev, Kalashnikova, Martemyanova.This revised version was published online in April 2005 with corrections to the article note and article title and cover date.     

Synthesis and study of Li<Subscript>3</Subscript>BaSrR<Subscript>3</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>8</Subscript> compounds (R = La-Lu,Y) with stratified sheelite structure

Possibility of substituting barium ions with strontium ions in the stratified sheelite structure of Li₃Ba₂R₃(MoO₄)₈ (sp. gr. C2/c) was examined. The molybdates Li₃BaSrR₃(MoO₄)₈ were synthesized and studied by X-ray diffraction analysis, differential-thermal analysis, and IR spectroscopy.     

The reaction between [RuCl<Subscript>2</Subscript>(PPh<Subscript>3</Subscript>)<Subscript>3</Subscript>] and hydroxyquinoline carboxylic acid

The reactions of [RuCl₂(PPh₃)₃] with 8-hydroxy-2-methyl-quinoline-7-carboxylic acid was examined, and a novel ruthenium(II) complex—[Ru(PPh₃)₂(C₅H₈NO)₂]—was obtained. The compound was studied by IR, UV–vis spectroscopy, and X-ray crystallography. The molecular orbital diagram of the complex was calculated with the density functional theory (DFT) method. The spin-allowed singlet–singlet electronic transitions of the compound were calculated using the time-dependent DFT method, and the UV–vis spectrum of the compound was discussed, on this basis. The luminescence property of the [Ru(PPh₃)₂(C₅H₈NO)₂]was examined.     

[Co(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>](WO<Subscript>4</Subscript>)Cl: Synthesis,crystal structure,and thermal properties

The crystal structure of [Co(NH₃)₆](WO₄)Cl complex salt is determined by single crystal X-ray. The thermal properties are examined, and the products obtained on heating the salt in different gaseous atmospheres are analyzed by powder X-ray diffraction.     

Selective sorption of water vapor from gas mixtures containing H<Subscript>2</Subscript>S,SO<Subscript>2</Subscript>, NO<Subscript>2</Subscript>, NO,and CO on KU-2 sulfonic styrene cation exchanger in different ion forms

Sorption of water vapor and some acid gases (H₂S, SO₂, NO₂, NO, and CO) on Ku-23-15/100 macroporous sulfonic cation exchanger in different ion forms and on commercial KSM silica gel and NaX artificial zeolite was studied under equilibrium and dynamic conditions. The equilibrium isotherms of water vapor sorption were measured for all the adsorbents examined. The mechanism of water sorption on the sulfonic cation exchanger was discussed.     

Synthesis and electrochemical performance of the Li-rich cathode material Li<Subscript>1.17</Subscript>Ni<Subscript>0.12</Subscript>Co<Subscript>0.13</Subscript>Mn<Subscript>0.58</Subscript>O<Subscript>2</Subscript> for lithium-ion batteries

Lithium-riched cathode material for lithium-ion batteries, Li_1.17Ni_0.12Co_0.13Mn_0.58O₂, was synthesized via crystallization from a solution of metal acetates, followed by a thermal treatment of the material obtained as a powder. The phase, elemental, and granulometric compositions of the material were examined, as well as the morphology of the powder particles obtained. The discharge capacity of the material in relation to the charging voltage was found from the results of electrochemical tests, and endurance tests were performed. The discharge capacity upon 85 charge/discharge cycles at voltages in the range 2.8–4.8 and a current of 0.1C was about 180 mA h g^–1.     

Sb<Subscript>2</Subscript>S<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> nanocomposite layers synthesized using the layer-by-layer technique

Possibility of layer-by-layer synthesis by colloidal layering of Sb₂S₃-SiO₂ nanocomposite layers from colloid solutions of {[H _x Sb₂S₅] ^m ?}mNa⁺ and SiO₂ was studied. The composition of the layers synthesized was examined by Raman spectroscopy, transmission spectroscopy in the UV and visible spectral ranges, energy-dispersion micro analysis, and scanning electron microscopy.     

Preparation and X-ray diffraction study of phosphate sulfates M<Subscript>2</Subscript>MgTi(SO<Subscript>4</Subscript>)(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Phosphate sulfates M₂MgTi(SO₄)(PO₄)₂ (M = alkali metal) prepared by the sol–gel technique with ethanol as salting-out agent were characterized by differential thermal analysis, electron probe microanalysis, and X-ray phase analysis. The crystal structure of the compounds synthesized (M = Na, K) was refined by powder X-ray diffraction. The phase stability of the phosphate sulfates under heating was examined.     

Synthesis and study of solid acid materials SnO<Subscript>2</Subscript>/B<Subscript>2</Subscript>O<Subscript>3</Subscript>

SnO₂/B₂O₃ samples were produced by a reaction between SnCl₄, H₃BO₃, and (NH₂)₂CO in a boiling aqueous solution. The Sn: B molar ratio in these samples was 1: 1, 1: 2, and 1: 3. The phase composition and degree of crystallinity of these materials was studied. The surface acidity of the samples was analyzed by the method based on a temperature-programmed reaction of dehydration of 2-methyl-3-butyn-2-ol. Thermal transformations of SnO₂/B₂O₃ samples were examined by means of differential-thermal analysis.     

Pentlandite leaching in the FeCl<Subscript>3</Subscript>-CuCl<Subscript>2</Subscript>-HCl system

Pentlandite leaching in binary and ternary systems comprised of FeCl₃, CuCl₂, and HCl was studied. The degree of decomposition and recovery of pentlandite, as well as the kinetic characteristics of the process were examined in relation to the composition of solution.     

Water uptake and infrared absorption in SrZr<Subscript>0.95</Subscript>M<Subscript>0.05</Subscript>O<Subscript>3-</Subscript><Subscript>a</Subscript> (<Emphasis Type="Italic">M</Emphasis>=Ga,Sc, Y and Nd)

Summary Proton concentration in SrZr_0.95M_0.05O_3-α (M=Ga, Sc, Y and Nd) was measured with a thermobalance at different temperatures (T=673-973 K) and water vapor pressures (P_H2O=0.9-12.8 kPa). At all the pressures and temperatures examined, the amount of proton concentration in these samples is in the order of Sc>Y>Ga>Nd. By an equilibrium evaluation, we estimated the maximum possible proton concentration about 2.0 mol% in these samples. Infrared (IR) absorption spectra are measured in these samples. The absorption bands can be fitted by four (M=Ga, Y, Nd) or three (M=Sc) Gaussian bands.     

H<Subscript>3</Subscript>PW<Subscript>12</Subscript>O<Subscript>40</Subscript> anchored on graphene-grafted silica-coated MnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> as magnetic catalyst for Mannich reaction

In this study, a three-component nanocomposite consisted of graphene, manganese ferrite and phosphotungstic acid (PTA) has been prepared. This composite, which is designated as Graphene/MnFe₂O₄@PTA, was synthesized through anchoring of PTA–imidazolium ionic liquid on magnetic graphene sheets. The structural and magnetic properties of the fabricated nanocomposite were studied by employing FT-IR, SEM, EDX, TEM, ICP, VSM, P-XRD and BET techniques. The synthesized magnetic nanocomposite was examined as an efficient and recyclable acidic catalyst for Mannich reaction under solvent-free conditions. The products of this reaction, which are an important class of potentially bioactive compounds, were obtained with good to excellent yields, and the catalyst could be readily recycled without any significant loss of its activity.     

Comparative Study of the Oxygen Storage Capacity of Pt/M<Subscript>x</Subscript>O<Subscript>y</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Systems

The oxygen storage capacity of 1% Pt/15% M_xO_y/Al₂O₃ systems containing a rare-earth or an alkaline-earth metal oxide or TiO₂ as the oxygen-storing component was studied. Oxygen storage capacity was evaluated as the amount of C₃H₈ reacting at 400°C with oxygen that was taken up by the catalyst during oxidative treatment. The systems containing a rare-earth metal oxide or TiO₂ possess the highest oxygen storage capacity among the catalysts examined (80 and 75 µmol C₃H₈/g Cat, respectively). Of the BaO and SrO systems, the latter is of interest, although its oxygen storage capacity (∼27 µmol C₃H₈/g Cat) is somewhat lower than the oxygen storage capacity of any rare-earth metal oxide or the TiO₂ system.__________Translated from Kinetika i Kataliz, Vol. 46, No. 4, 2005, pp. 585–589.Original Russian Text Copyright © 2005 by Sinel’nikov, Tolkachev, Stakheev.     

LiNi<Subscript>0.8</Subscript>Co<Subscript>0.2−x</Subscript>Ti<Subscript>x</Subscript>O<Subscript>2</Subscript> nanoparticles: synthesis,structure, and evaluation of electrochemical properties for lithium ion cell application

Layered Ti-doped lithiated nickel cobaltate, LiNi_0.8Co_{0.2 − x}Ti_xO₂ (where x = 0.01, 0.03, and 0.05) nanopowders were prepared by wet-chemistry technique. The structural properties of synthesized materials were characterized by X-ray diffraction (XRD) and thermo-gravimetric/differential thermal analysis (TG/DTA). The morphological changes brought about by the changes in composition of LiNi_0.8Co_{0.2 − x}Ti_xO₂ particles were examined through surface examination techniques such as scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses. Electrochemical studies were carried out using 2016-type coin cell in the voltage range of 3.0–4.5 V (vs carbon) using 1 M LiClO₄ in ethylene carbonate and diethyl carbonate as the electrolyte. Among the various concentrations of Ti-doped lithiated nickel cobaltate materials, C/LiNi_0.8Co_0.17Ti_0.03O₂ cell gives stable charge–discharge features.     

A study of phase formation in the subsolidus region of the system Na<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-MnMoO<Subscript>4</Subscript>-Cr<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Phase relationships in the subsolidus region of the system Na₂MoO₄-MnMoO₄-Cr₂(MoO₄)₃ were studied by means of X-ray diffraction and differential-thermal analyses. The possibility of obtaining a variablecomposition phase Na_1?x Mn_1?x Cr_1+x (MoO₄)₃ (0 ≤ x ≤ 0.5) and ternary molybdate NaMn₃Cr(MoO₄)₅ was examined. The temperature dependence of the conductivity of the phase Na_1?x Mn_1?x Cr_1+x (MoO₄)₃ was analyzed.     

Synthesis,X-ray studies,spectroscopic investigation,and DFT calculations of [ReBr<Subscript>3</Subscript>(dppt)(OPPh<Subscript>3</Subscript>)]

The reaction of [ReOBr₃(PPh₃)₂] with 5,6-diphenyl-3-(2-pyridyl)-1,2,4-trazine (dppt) has been examined and [ReBr₃(dppt)(OPPh₃)] has been obtained. It was characterised by IR, UV–Vis spectroscopy, magnetic measurements, and X-ray crystallography. The electronic structure of [ReBr₃(dppt)(OPPh₃)] has been studied by DFT/B3LYP level calculations, and TDDFT calculations were employed for discussion of its electronic spectrum in more detail. The magnetic behavior is characteristic of mononuclear complexes with d⁴ low-spin octahedral Re(III) complexes (³T_1g ground state) and arise because of the large spin–orbit coupling (ζ = 2500 cm⁻¹), which gives diamagnetic ground state.     

Oxygen dependence of NO adsorption on Hollandite-type K<Subscript>x</Subscript>Ga<Subscript>x</Subscript>Sn<Subscript>8–<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>16</Subscript> thin film

Thin films of hollandite-type K_1.9Ga_1.9Sn_6.1O₁₆ (KGSO) were prepared by a spin-coating method. The films were colorless and transparent, 100-150 nm thick, and consisted of KGSO fine particles of about 20 nm in average size. The adsorption behavior of NO on the KGSO surface was examined by diffuse reflectance infrared fourier transform (DRIFTS). The KGSO was preheated at 968 K in a gas mixture of N₂ and O₂ prior to NO adsorption. As the oxygen ratio in the gas mixture increased up to 40%, absorption bands emerged and became stronger around 1400 cm^-1. Those bands were assigned to NO₂ species in chelating and nitrito form. It was found that the coexistence of oxygen remarkably improves the adsorption ability of NO on KGSO surface.     

Carbon black oxidation mechanism in loose and tight contacts with Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and CeO<Subscript>2</Subscript> catalysts

The catalytic combustion of carbon black was investigated in the presence of CeO₂ and Al₂O₃. The influence of contact type between carbon particles and these oxides was examined by thermal analysis, the BET specific area, and EPR spectroscopy. For tight contact carbon black-catalyst mixtures, a new paramagnetic species is observed and can be considered as a fingerprint of the contact between the two solids. These new paramagnetic species increase the reactivity of the catalytic reaction of carbon black (CB) combustion and take part in the oxidation mechanism of CB. Published in Russian in Kinetika i Kataliz, 2007, Vol. 48, No. 6, pp. 899–904. This article was submitted by the authors in English.