纵横载荷作用下功能梯度梁的弯曲和过屈曲

基于一阶非线性梁理论和物理中面概念,导出了纵横向载荷作用下功能梯度材料(FGM)梁非线性弯曲和过屈曲问题的控制方程,并获得了该问题的精确解;据此解研究了梯度材料性质、外载荷、横向剪切变形以及边界条件等因素对功能梯度材料梁非线性力学行为的影响,分析中假设功能梯度材料性质只沿梁厚度方向,并按成分含量的幂指数函数形式变化。结果表明:纵横载荷共同作用下,功能梯度梁的弯曲构形将有无限多个;随着梯度指数的增大,梁的变形减小,临界载荷升高;随着长高比的增大,横向剪切变形的影响减小。     

热环境中功能梯度圆形薄板的混沌运动

针对陶瓷-金属功能梯度圆板,同时考虑几何非线性、材料物性参数随温度变化且材料组分沿厚度方向按幂律分布的情况,应用虚功原理给出了热载荷与横向简谐载荷共同作用下的非线性振动偏微分方程。在固支无滑动的边界条件下,通过引入位移函数,利用伽辽金方法得到了达芬型非线性动力学方程。利用Melnikov方法,给出了热环境中功能梯度圆板可能发生混沌运动的临界条件。通过数值算例,给出了不同体积分数指数和温度的同宿分岔曲线,平面相图和庞加莱映射图,讨论其对临界条件的影响,证实了系统混沌运动的存在。通过分岔图和与其相对应的最大李雅普诺夫指数图,分析了激励频率和激励幅值对倍周期分岔的影响及变化规律,发现系统可出现周期、倍周期和混沌等复杂动力学响应。     

Crack propagation in a functionally graded plate under thermal shock

Summary Thermal cracking in a ceramic/metal functionally graded plate is discussed. When a functionally graded plate is cooled from high temperature, curved or straight crack paths are experimentally observed on the ceramic surface. One of the reasons that make the crack paths to differ are the thermal or mechanical conditions. In order to clarify the influence of these conditions on the crack path, the crack propagation is simulated using finite element method. Received 29 September 1998; accepted for publication 2 August 1999     

Axisymmetric bending of functionally graded circular magneto-electro-elastic plates

Axisymmetric bending of functionally graded circular magneto-electro-elastic plates of transversely isotropic materials is analyzed based on linear three-dimensional theory of elasticity coupled with magnetic and electric fields. The transverse loads are expanded in Fourier-Bessel series and therefore can be arbitrarily distributed along the radial direction. The radial distributions of the displacements are assumed in combination of Fourier-Bessel series and polynomials as well as the electric potential and magnetic potential. If the material properties obey the exponential law along the thickness of the plate, two three-dimensional exact solutions for two unusual boundary conditions can be derived since they satisfy the governing equations and specified boundary conditions point by point. For simply supported or clamped boundary, the obtained solutions satisfy the governing equations exactly and the boundary conditions approximately. A layer wise model is also introduced to treat with the plates whose material property components vary independently and arbitrarily along the thickness of the plates. The numerical results are finally tabulated and plotted to demonstrate the presented method and agree well with those from finite element methods.     

On asymmetric bending of functionally graded solid circular plates

Based on the three-dimensional elasticity equations, this paper studies the elastic bending response of a transversely isotropic functionally graded solid circular plate subject to transverse biharmonic forces applied on its top surface. The material properties can continuously and arbitrarily vary along the thickness direction. By virtue of the generalized England’s method, the problem can be solved by determining the expressions of four analytic functions. Expanding the transverse load in Fourier series along the circumferential direction eases the theoretical construction of the four analytic functions for a series of important biharmonic loads. Certain boundary conditions are then used to determine the unknown constants that are involved in the four constructed analytic functions. Numerical examples are presented to validate the proposed method. Then, we scrutinize the asymmetric bending behavior of a transversely isotropic functionally graded solid circular plate with different geometric and material parameters.     

Non-linear analysis of functionally graded plates in cylindrical bending under thermomechanical loadings based on a layerwise theory

A layerwise theory is used to analyze analytically displacements and stresses in functionally graded composite plates in cylindrical bending subjected to thermomechanical loadings. The plates are assumed to have isotropic, two-constituent material distribution through the thickness, and the modulus of elasticity of the plate is assumed to vary according to a power-law distribution in terms of the volume fractions of the constituents. The non-linear strain–displacement relations in the von Kármán sense are used to study the effect of geometric non-linearity. The equilibrium equations are solved exactly and also by using a perturbation technique. Numerical results are presented to show the effect of the material distribution on the deflections and stresses.     

3D electroelastic fields in a functionally graded piezoceramic hollow sphere under mechanical and electric loadings

Summary  The problem of a piezoceramic hollow sphere is investigated analytically based on the 3D equations of piezoelasticity. The functionally graded property of the material along the radial direction can be taken arbitrarily in the paper. Displacement and stress functions are introduced, and two independent state equations with variable coefficients are derived. By employing the laminate model, the two state equations are transformed into ones with constant variables from which the state variable solution is easily obtained. Two linear relationships between the state variables at the inner and outer spherical surfaces are established. Numerical calculations are performed for different boundary conditions imposed on the spherical surfaces. Received 28 February 2001; accepted for publication 26 June 2001     

Nonlinear analysis of a thin circular functionally graded plate and large deflection effects on the forces and moments

The dynamic von Karman equations are used for nonlinear analysis of a thin circular plate made of a functionally graded material. The thickness of the plate is constant and the properties of the functionally graded material depend on temperature and vary throughout the thickness. It is assumed that the plate oscillates with large amplitudes. The forces and moments in the plate are determined in solving the equations for harmonic vibrations. Relevant results are obtained in the case of stead-state free vibrations. These results indicate that the volume fraction has a strong effect on the forces, moments, and material properties Published in Prikladnaya Mekhanika, Vol. 44, No. 6, pp. 134–144, June 2008. An erratum to this article can be found at     

Nonlinear free vibration and post-buckling analysis of functionally graded beams on nonlinear elastic foundation

In this study, simple analytical expressions are presented for large amplitude free vibration and post-buckling analysis of functionally graded beams rest on nonlinear elastic foundation subjected to axial force. Euler–Bernoulli assumptions together with Von Karman’s strain–displacement relation are employed to derive the governing partial differential equation of motion. Furthermore, the elastic foundation contains shearing layer and cubic nonlinearity. He’s variational method is employed to obtain the approximate closed form solution of the nonlinear governing equation. Comparison between results of the present work and those available in literature shows the accuracy of this method. Some new results for the nonlinear natural frequencies and buckling load of the FG beams such as the effect of vibration amplitude, elastic coefficients of foundation, axial force, and material inhomogenity are presented for future references.     

Mixed-mode fracture analysis of orthotropic functionally graded materials under mechanical and thermal loads

Mixed-mode fracture problems of orthotropic functionally graded materials (FGMs) are examined under mechanical and thermal loading conditions. In the case of mechanical loading, an embedded crack in an orthotropic FGM layer is considered. The crack is assumed to be loaded by arbitrary normal and shear tractions that are applied to its surfaces. An analytical solution based on the singular integral equations and a numerical approach based on the enriched finite elements are developed to evaluate the mixed-mode stress intensity factors and the energy release rate under the given mechanical loading conditions. The use of this dual approach methodology allowed the verifications of both methods leading to a highly accurate numerical predictive capability to assess the effects of material orthotropy and nonhomogeneity constants on the crack tip parameters. In the case of thermal loading, the response of periodic cracks in an orthotropic FGM layer subjected to transient thermal stresses is examined by means of the developed enriched finite element method. The results presented for the thermally loaded layer illustrate the influences of the material property gradation profiles and crack periodicity on the transient fracture mechanics parameters.     

Dynamic stress analysis of a functionally graded material plate with a circular hole

This paper is to study the two-dimensional dynamic stress of a functionally graded material (FGM) plate with a circular hole under plane compressional waves at infinity. With using the method of piece-wise homogeneous layers, the dynamic stress distribution of the FGM plate having radial arbitrary material parameters is derived based on the complex variable method. As examples, numerical results are presented for the FGM plate having given radial shear modulus, density and Poisson’s ratio. It is found that the dynamic stress around the circular hole in the FGM plate can be effectively reduced by choosing the proper change ways of the radial material parameters for different frequency incident wave.     

Nonlinear vibration analysis of piezo-thermo-electrically actuated functionally graded circular plates

A theoretical model for geometrically nonlinear vibration analysis of thermo-piezoelectrically actuated circular plates made of functionally grade material (FGM) is presented based on Kirchhoff’s–Love hypothesis with von-Karman type geometrical large nonlinear deformations. The material properties of the FG core plate are assumed to be graded in the thickness direction according to the power-law distribution in terms of the volume fractions of the constituents. Dynamic equations and boundary conditions including thermal, elastic and piezoelectric couplings are formulated and solutions are derived. An exact series expansion method combined with perturbation approach is used to model the nonlinear thermo-electro-mechanical vibration behavior of the structure. Control of the FG plate’s nonlinear deflections and natural frequencies using high control voltages is studied and their nonlinear effects are evaluated. Numerical results for FG plates with various mixtures of ceramic and metal are presented in dimensionless forms. A parametric study is also undertaken to highlight the effects of the thermal environment, applied actuator voltage and material composition of the FG core plate on the nonlinear vibration characteristics of the composite structure.     

Nonlinear dynamic response of a functionally graded plate with a through-width surface crack

A nonlinear vibration analysis of a simply supported functionally graded rectangular plate with a through-width surface crack is presented in this paper. The plate is subjected to a transverse excitation force. Material properties are graded in the thickness direction according to exponential distributions. The cracked plate is treated as an assembly of two sub-plates connected by a rotational spring at the cracked section whose stiffness is calculated through stress intensity factor. Based on Reddy’s third-order shear deformation plate theory, the nonlinear governing equations of motion for the FGM plate are derived by using the Hamilton’s principle. The deflection of each sub-plate is assumed to be a combination of the first two mode shape functions with unknown constants to be determined from boundary and compatibility conditions. The Galerkin’s method is then utilized to convert the governing equations to a two-degree-of-freedom nonlinear system including quadratic and cubic nonlinear terms under the external excitation, which is numerically solved to obtain the nonlinear responses of cracked FGM rectangular plates. The influences of material property gradient, crack depth, crack location and plate thickness ratio on the vibration frequencies and transient response of the surface-racked FGM plate are discussed in detail through a parametric study.     

Coupled thermal/mechanical analysis for the fracture of functionally graded materials under transient thermal loading

A comprehensive treatment of fracture of functionally graded materials (FGMs) is provided. It is assumed that the material properties depend only on the coordinate perpendicular to the crack surfaces and vary continuously along the crack faces. By using a laminated composite plate model to simulate the material non-homogeneity, an algorithm for solving the system based on Laplace transform and Fourier transform techniques is presented. Unlike earlier studies that considered certain assumed property distributions and a single crack problem, the current investigation studies multiple crack problem in the FGMs with arbitrarily varying material properties. Transient thermal stresses are presented. Project supported by the National Natural Science Foundation of China (Nos 10102004 and 19902003).     

Exact solutions of functionally graded piezoelectric shells under cylindrical bending

Within a framework of the three-dimensional (3D) piezoelectricity, we present asymptotic formulations of functionally graded (FG) piezoelectric cylindrical shells under cylindrical bending type of electromechanical loads using the method of perturbation. Without loss of generality, the material properties are regarded to be heterogeneous through the thickness coordinate. Afterwards, they are further specified to be constants in single-layer homogeneous shells and to obey an identical exponent-law in FG shells. The transverse normal load and normal electric displacement (or electric potential) are, respectively, applied on the lateral surfaces of the shells. The cylindrical shells are considered to be fully simple supports at the edges in the circumferential direction and with a large value of length in the axial direction. The present asymptotic formulations are applied to several benchmark problems. The coupled electro-elastic effect on the structural behavior of FG piezoelectric shells is evaluated. The influence of the material property gradient index on the variables of electric and mechanical fields is studied.     

Stochastic thermoelastic problem of a functionally graded plate under random temperature load

This study attempts to derive the statistics of temperature and thermal stress in functionally graded material (FGM) plates exposed to random external temperatures. The thermomechanical properties of the FGM plates are assumed to vary arbitrarily only in the plate thickness direction. The external temperatures are expressed as random functions with respect to time. The transient temperature field in the FGM plate is determined by solving a nonhomogeneous heat conduction problem for a multilayered plate with linear nonhomogeneous thermal conductivity and different homogeneous heat capacity in each layer. The autocorrelations and power spectrum densities (PSDs) of temperature and thermal stress are derived analytically. These statistics for FGM plates composed of partially stabilised zirconia (PSZ) and austenitic stainless steel (SUS304) are computed under the condition that the fluctuation in the external temperature can be considered as white noise or a stationary Markov process.     

The bifurcation analysis on the circular functionally graded plate with combination resonances

The bifurcation and chaos of a clamped circular functionally graded plate is investigated. Considered the geometrically nonlinear relations and the temperature-dependent properties of the materials, the nonlinear partial differential equations of FGM plate subjected to transverse harmonic excitation and thermal load are derived. The Duffing nonlinear forced vibration equation is deduced by using Galerkin method and a multiscale method is used to obtain the bifurcation equation. According to singularity theory, the universal unfolding problem of the bifurcation equation is studied and the bifurcation diagrams are plotted under some conditions for unfolding parameters. Numerical simulation of the dynamic bifurcations of the FGM plate is carried out. The influence of the period doubling bifurcation and chaotic motion with the change of an external excitation are discussed.     

Non-axisymmetric thermal stress of a functionally graded coated circular inclusion in an infinite matrix

This paper is to study the non-axisymmetric two-dimensional problem of thermal stresses in an infinite matrix with a functionally graded coated circular inclusion based on complex variable method. With using the method of piece-wise homogeneous layers, the general solution for the functionally graded coating having radial arbitrary elastic properties is derived when the matrix is subjected to uniform heat flux at infinity, and then numerical results are presented for several special examples. It is found that the existence of the functionally graded coating can change interfacial thermal stresses, and choosing proper change ways of the radial elastic properties in the coating can obviously reduce the thermal stresses.