Proton conductivity in sol–gel-derived P2O5–TiO2–SiO2 glasses

The sol–gel method was applied to prepare the P₂O₅–TiO₂–SiO₂ glasses with high proton conductivities and chemical stability. The glasses were prepared by the reaction of the Ti- and Si-alkoxides with PO(OCH₃)₃ or H₃PO₄, followed by heating at 600 °C. The obtained glasses were porous, the average pore diameter of which was <2 and 4 nm for glasses prepared using PO(OCH₃)₃ and H₃PO₄, respectively. The phosphorous ions, occurring as PO(OH)₃ in the TiO₂-free glass, were polymerized with one or two bridging-oxygen ions per PO₄ unit with the increasing TiO₂ content. Despite the P₂O₅–SiO₂ binary glasses exhibiting high conductivities of ∼10⁻² S/cm at room temperature, they also dissolved after immersing for 24 h in water. The chemical stability of these glasses increased significantly on the addition of TiO₂.     

Optical properties of glasses in the Li2O–MoO3–P2O5 system

Glasses xLi₂O–(50-x)(MoO₃)₂–50P₂O₅ with x = 10, 20, 30, and 40 mol% were prepared and their optical and electrical properties were investigated. Analysis of the IR spectra revealed that the Li⁺ ions act as a glass modifier that enter the glass network by breaking up other linkages and creating non-bridging oxygens in the network. The optical absorption edge of the glasses was measured for specimens in the form of thin blown films and the optical absorption spectra of those were recorded in the range 200–800 nm. From the optical absorption edges studies, the optical band gap (E _opt) and the Urbach energy (E _e) values have been evaluated by following the available semi-empirical theories. The linear variation of (αhν)^1/2 with hν, is taken as evidence of indirect interband transitions. The E _opt values were found to decrease with increasing Li₂O content by causing increase in the number of non-bridging oxygens in network. The Urbach tail analysis gives the width of localized states between 0.48 and 0.74 eV.     

Activation energy and conductivity of glasses in the P2O5–V2O5–Li2O system

The conductivity of glasses in the 50\textP_\text2 \textO_\text5 - x\textV_\text2 \textO_\text5 - ( 50 - x )\textLi_\text2 \textO50{\text{P}}_{\text{2}} {\text{O}}_{\text{5}} - x{\text{V}}_{\text{2}} {\text{O}}_{\text{5}} - \left( {50 - x} \right){\text{Li}}_{\text{2}} {\text{O}} system was studied as a function of temperature and composition. For all compositions, the conductivity variation as a function of temperature followed an Arrhenius type relationship. Isothermal variation of conductivity as a function of composition showed a minimum for a molar ratio x near 20. Probable mechanisms for decrease of conductivity with decrease of vanadium oxide concentration were explained. The minimum in room temperature was attributed to increase of V⁴⁺/V⁵⁺ with decrease of vanadium oxide in specific concentrations of vanadium oxide. Activation energy increased with decrease of V₂O₅ content. This behavior was attributed to increase of average spacing between vanadium ions.     

YAG laser-induced β-BaB2O4 crystalline dot formation in Sm2O3–BaO–B2O3 glasses

A continuous-wave (CW) YAG laser (power: 0.75–0.9 J/s, irradiation time: 15 s–15 min) with a wavelength of 1064 nm is irradiated to 11.1Sm₂O₃·44.4BaO·44.4B₂O₃ glass, and the formation of β-BaB₂O₄ (β-BBO) crystalline dots with a diameter of 30–150 μm is confirmed from micro-Raman spectra. β-BBO crystals with around 200 μm length grow towards the interior of the glass. The incorporation of Sm³⁺ into β-BBO crystalline dots is suggested from micro-Raman and fluorescence spectra. The second harmonic generation is detected from the array (10×10=100 dots) of β-BBO crystalline dots, indicating that each crystalline dot formed by YAG laser irradiation is a nonlinear optical crystal. CW YAG laser irradiation to glass with Sm³⁺ ions is a nice technique for a spatially controlled crystal growth.     

Optical and IR study of Li2O–CuO–P2O5 glasses

Infrared (IR) and UV spectra of ternary Li₂O–CuO–P₂O₅ glasses in two series Li₂O(65−X)%–CuO(X%)–P₂O₅(35%), X = 20, 30, 40 and Li₂O(55−X)%–CuO(X%)–P₂O₅(45%), X = (10, 20, 30) were studied. Infrared (IR) investigations showed the metaphosphate and pyrophosphate structures and with increase of CuO content in metaphosphate glass, the skeleton of metaphosphate chains is gradually broken into short phosphate groups such as pyrophosphate. IR spectra showed one band at about 1,220 and 1,260 cm⁻¹ for P₂O₅(35%) and P₂O₅(45%) series, respectively, assigned to P=O bonds. For CuO additions ≤20 mol%, the glasses exhibit two bands in the frequency range 780–720 cm⁻¹ which are attributed to the presence of two P–O–P bridges in metaphosphate chain. But for CuO addition ≥30 mol%, the glasses exhibit only a single band at 760 cm⁻¹ which is assigned to the P–O–P linkage in pyrophosphate group. In optical investigations, absorption coefficient versus photon energy showed three regions: low energy side, Urbach absorption, and high energy side. In Urbach’s region, absorption coefficient depends exponentially on the photon energy. At high energy region, optical gap was calculated and investigations showed indirect transition in compounds and decreases in optical gap with increases of copper oxides contents that is because of electronic transitions and increasing of nonbridging oxygen content.     

Electrical transport characteristics of ZnO–Bi2O3–B2O3 glasses

Optically clear glasses in the ZnO–Bi₂O₃–B₂O₃ (ZBBO) system were fabricated via the conventional melt-quenching technique. Dielectric constant and loss measurements carried out on ZBBO glasses unraveled nearly frequency (1 kHz–10 MHz)-independent dielectric characteristics associated with significantly low loss (D?=?0.004). However, weak temperature response was found with temperature coefficient of dielectric constant 18?±?4 ppm °C^?1 in the 35–250 °C temperature range. The conduction and relaxation phenomena were rationalized using universal AC conductivity power law and modulus formalism respectively. The activation energy for relaxation determined using imaginary parts of modulus peaks was 2.54 eV which was close to that of the DC conduction implying the involvement of similar energy barriers in both the processes. Stretched and power exponents were temperature dependent. The relaxation and conduction in these glasses were attributed to the hoping and migration of Bi³⁺ cations in their own and different local environment.     

Ultrasonic and FT-IR studies on Bi2O3–Er2O3–PbO glasses

Glasses in the 90Bi₂O₃–(10?x)Er₂O₃?xPbO (x = 3, 5, 7, 9 and 10 mol%) system have been prepared by the melt-quenching technique. Elastic properties and FT-IR spectroscopic studies have been employed to study the role of PbO in the structure of the investigated system. Elastic properties and Debye temperature were recorded using sound wave velocity measurements at 4 MHz at room temperature. The results showed that density increased and molar volume decreased, while both sound velocities increased with an increase in x. Infrared spectra of the glasses revealed that the bismuthate network is affected by an increase in PbO content. The results are interpreted in terms of the conversion of [BiO₆] into [BiO₃] structural units, indicating that Pb ions have been substituted for erbium ions as tetrahedral network formers. The elastic moduli increased with increasing PbO content due to the increased average bond strength and degree of connectivity, as a direct effect of the increase in [BiO₃] structural units.     

Non-adiabatic small-polaron hopping conduction in VN–PbO–TeO2 glasses

The dc conductivity of VN–PbO–TeO₂ glasses with different mole percentages of VN, PbO and TeO₂ has been measured in the temperature range 125–450?K. The conductivity of the glasses increases with increasing VN content for a fixed mole percentage of PbO. Neither Mott's variable-range hopping (VRH) model at low temperatures (T<Θ_D/4, where Θ_D is the Debye temperature) nor Greaves’ VRH model at intermediate temperatures (Θ_D/?4<T<Θ_D/2) describe the dc conductivity data for these glasses. Multiphonon tunnelling transport of strongly coupled electrons is also unable to account for the carrier transport. However, at high temperatures (T?>?Θ_D/2), conduction is shown to be due to small-polaron hopping in the non-adiabatic regime. Alteration of the VN content causes a change in the model parameters achieved from best-fitting curves for the glasses. Modulated differential scanning calorimetry analysis shows that the glass transition temperatures T _g in this system vary from 269 to 302°C.     

Synthesis and properties of MoO3–V2O5–PbO glasses

Lead vanadate glasses of the system xMoO₃–50V₂O₅–(50-x)PbO (0 ≤ x ≤ 25 mol. %) were synthesized and studied by FTIR and ultrasonic spectroscopy and differential scanning calorimetry to investigate the role of MoO₃ content on their atomic structure. The elastic properties and Debye temperatures of the glasses were investigated using sound velocity measurements at 4 MHz. The activation energy for the glass transition was derived from the dependence of the glass-transition temperature (T_g ) on the heating rate. Similarly, the activation energy of the crystallization process was also determined. According to the IR analysis, the vibrations of the vanadate structural units are shifted towards higher wavenumbers on the formation of bridging oxygens. The change of density and molar volume with MoO₃ content reveals that the molybdinate units are less dense than the lead oxide units. The observed compositional dependence of the elastic moduli is interpreted in terms of the effect of MoO₃ on the coordination number of the vanadate units. A good correlation was observed between the experimentally determined elastic moduli and those computed according to the Makishima–Mackenzie model. It is assumed that MoO₃ plays the role of a glass former by increasing the activation energy for the glass transition and the activation energy for crystallization and by increasing both the thermal stability and the glass formation range of the vanadate glasses.     

Ultrasonic,FTIR and thermal investigations of SiO2–Na2O–CaO–P2O5 glasses doped with CeO2

The longitudinal and shear ultrasonic wave velocities for different compositions of SiO₂–Na₂O–CaO–P₂O₅ glasses were measured at room temperature (305 K) using a pulse-echo method at a frequency of 4 MHz. The elastic moduli, Poisson's ratio, microhardness, Debye temperature and other ultrasonic parameters were obtained from experimental data and analyzed using bond compression theory. By calculating the number of network bonds per unit volume, the average stretching constant, and the average ring size, information about the structure of the glass can be deduced. Structural changes after doping with CeO₂ were investigated by FTIR spectroscopy, and by measurements of the thermal expansion coefficient, glass transition and softening temperature to throw more light on the characterization of these glasses.     

Spectral dispersion of linear optical properties for Sm2O3 doped B2O3–PbO–Al2O3 glasses

Glasses having composition (B₂O₃)₂₅ (PbO)₇₀ (Al₂O₃)₅ (Sm₂O₃)_x ,where x=0, 0.5, 1, 2, 3 and 5 g were prepared using the normal melt quench technique. Spectral reflectance and transmittance at normal incidence of the glass samples are recorded with a spectrophotometer in the spectral range 220–2200 nm. These measured values are introduced into analytical expressions to calculate the real and imaginary parts of the refractive indices. Wemple–DiDomenico single oscillator model and one-term Sellmeier dispersion relations are used to model the real refractive indices. Dispersion parameters such as: single oscillator energy, dispersion energy, lattice oscillating strength, average oscillator wavelength, average oscillator strength and Abbe's number are deduced and compared. Absorption dispersion parameters such as: Fermi energy, optical energy gap for direct and indirect transitions, Urbach energy and steepness parameter are calculated. Effects of doping Sm₂O₃ on these linear optical parameters are investigated and interpreted.     

Broadband 1.5-μm emission of high erbium-doped Bi2O3–B2O3–Ga2O3 glasses

High Erbium-doped glass showing the wider 1.5-μm emission band is reported in the Bi₂O₃–B₂O₃–Ga₂O₃ system and its thermal stability and optical properties such as absorption, emission spectra, absorption and stimulated emission cross-sections and fluorescence lifetime are investigated. Compared with other glass hosts, the gain bandwidth properties of high Er³⁺ content in BBG glass are better than those of tellurite, germanate, silicate and phosphate glasses. The broad and flat ⁴I_13/2→⁴I_15/2 emission and the larger stimulated emission cross-section of Er³⁺ ions around 1.5 μm enable it to be used as a host material for potential broadband optical amplifiers at C and L bands in the microchip configuration.     

Effect of TiO2 addition on the crystallization of quenched glasses in the SiO2–Al2O3–ZrO2 system

The glass formation in the SiO₂-rich region of the ternary oxide system Al₂O₃–ZrO₂–SiO₂ with MgO, CaO, and TiO₂ as melting aids was analyzed. The crystallization of glasses with different content of TiO₂ and phase evolution with the temperature was studied by X-ray diffraction, infrared, laser Raman spectroscopy and transmission electron microscopy. The use of TiO₂ favored formation and crystallization of the glasses due to the decrease of the viscosity of melts and acting as a nucleating agent. The crystalline phase of t-ZrO₂ was developed at temperatures as low as 880°C whereas in as prepared specimens without TiO₂ its presence was not detected. For the specimens with TiO₂, t-ZrO₂ and mullite were the principal phases at 1000°C. TiO₂ addition did not change the crystallization sequence but decreased the formation temperature of the crystalline phases. Most of Ti⁴⁺ ions entered into t-ZrO₂ and only a small portion in mullite, but the surplus was detected in ZrTiO₄.     

Thermal analysis and infrared study of Nb2O5–TeO2 glasses

Tellurite glasses of the xNb₂O₅–(100–x) TeO₂, (3 ≤ x ≤ 20 mol%) system have been prepared and studied by IR spectroscopy and differential thermal analysis to explore the role of Nb₂O₅ on their structure. IR analysis indicates that NbO₆ transforms TeO₄ units into tellurite structural TeO₃ units, with a shift of lattice vibrations towards higher wavenumbers. The stretching force constant of the tellurite structural units increases with Nb₂O₅ content, a feature that is attributed to the higher bond strength and higher coordination number of Nb₂O₅ relative to TeO₂. The crystallization kinetics has been studied under non-isothermal conditions using the formal theory of transformations for heterogeneous nucleation. The crystallization results are analyzed, and both the activation energy of the crystallization process and the crystallization mechanism are characterized. The thermal stability of these glasses are characterized in terms of characteristic temperatures, such as the glass-transition temperature, T _g, the temperature of onset of crystallization, T _in, the temperature corresponding to the maximum crystallization rate, T _p, and two kinetic parameters, K(T _g) and K(T _p). The results reveal that thermal stability increases with increasing Nb₂O₅ content. XRD diffraction of the studied glasses indicates the presence of microcrystallites of α-tellurite, γ-telluride, Nb₂Te₄O₁₃ and an amorphous matrix.     

Spectroscopic investigations on PbO–As2O3 glasses crystallized with TiO2

PbO–As₂O₃ glasses mixed with different concentrations of TiO₂ (ranging from 0 to 1.0 mol%) were crystallized. The samples were characterized by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy (EDS) techniques. Studies were extended to optical absorption, IR, ESR, luminescence and magnetic susceptibility on these samples. The X-ray diffraction studies reveal the presence of Pb₃O₄, Ti(As₂O₇), Pb(As₂O₆), Pb₃(AsO₄)₂ PbTi₃O₇ and Ti₂O₃ crystal phases. The optical absorption studies together with ESR and magnetic susceptibility measurements indicated that the titanium ions exist in both Ti³⁺ and Ti⁴⁺ states in all the samples and there is an increase in titanium ions in the trivalent state with increasing concentration of nucleating agent TiO₂. The quantitative analysis of these results indicated that there is a growing degree of disorder in the glass network with increasing concentration of the crystallizing agent. The luminescence studies indicated that the samples crystallized with low concentrations of TiO₂ show high luminescence efficiency in the visible region.     

Picosecond nonlinearity of GeO2–Bi2O3–PbO–TiO2 glasses at 532 and 1,064 nm

The third-order optical properties of GeO₂–Bi₂O₃–PbO–TiO₂ glasses at 532 nm and 1,064 nm were studied to evaluate their potential for optical limiting and all-optical switching. The Z-scan technique was used to determine the nonlinear (NL) refractive index, n ₂, and the NL absorption coefficient, α ₂, of samples with different amounts of the constituent oxides. Values of n ₂ ≈ + 0.7 × 10^?14 cm²/W at 1,064 nm and ≈+1.5 × 10^?14 cm²/W at 532 nm were measured. The NL absorption coefficient, α ₂, was smaller than the minimum that our apparatus can measure (α ₂ < 0.01 cm/GW) in the near-infrared (1,064 nm); in the visible region (532 nm), we obtained α ₂ ≈ 4.4 cm/GW. The set of NL parameters measured indicates the potential usefulness of the GeO₂–Bi₂O₃–PbO–TiO₂ glasses for all-optical switching at 1,064 nm and for optical limiting at 532 nm.     

Luminescence and energy transfer in La2O3–Nb2O5–B2O3:M3+ (M=Bi,Eu, Dy) glasses

The luminescence and energy transfer processes in La₂O₃–Nb₂O₅–B₂O₃:M³⁺ (M=Bi, Eu, Dy) glasses were investigated using luminescence spectroscopy (excitation and emission, down to 4.2 K) and decay time measurements at room temperature. The observation of niobate luminescence implies a considerable degree of short- and intermediate-range order in these glasses. Energy transfer from the niobate groups to the lanthanide ions was observed for Eu³⁺, but not for Dy³⁺, suggesting that the energy transfer process occurs to the charge-transfer state of the Eu³⁺ ion, rather than to its f-levels. Inter-Eu³⁺ energy transfer was negligible in the concentration range investigated (up to 3 mol%). In contrast, cross-relaxation processes between Dy³⁺ ions were active at concentrations as low as 0.5 mol%. In the Bi³⁺ doped glasses the energy transfer was observed from the Bi³⁺ excited levels to the oxygen deficient niobate groups.     

Meyer–Neldel DC conduction in chalcogenide glasses

Meyer–Neldel (MN) formula for DC conductivity (σ _DC) of chalcogenide glasses is obtained using extended pair model and random free energy barriers. The integral equations for DC hopping conductivity and external conductance are solved by iterative procedure. It is found that MN energy (ΔE _MN) originates from temperature-induced configurational and electronic disorders. Single polaron-correlated barrier hopping model is used to calculate σ _DC and the experimental data of Se, As₂S₃, As₂Se₃ and As₂Te₃ are explained. The variation of attempt frequency ν ₀ and ΔE _MN with parameter (r/a), where r is the intersite separation and a is the radius of localized states, is also studied. It is found that ν ₀ and ΔE _MN decrease with increase of (r/a), and ΔE _MN may not be present for low density of defects.     

Spectroscopic characterization of Tm3+:TeO2–K2O–Nb2O5 glasses for 2-μm lasing applications

We have performed detailed experiments to investigate the spectroscopic properties of a new type of tellurite based host doped with thulium: Tm₂O₃:(0.70)TeO₂–(0.15)K₂O–(0.15)Nb₂O₅ having Tm₂O₃ concentrations of 0.125, 0.25, 0.5, and 1.0 mol%. By performing a Judd–Ofelt analysis of the absorption bands, we obtained average radiative lifetimes of 2.57±0.20 and 0.35±0.01 ms for the ³H₄ and ³F₄ levels, respectively. Furthermore, we also observed that an increase in the Tm₂O₃ concentration from 0.125 to 1.0 mol% results in a decrease of the measured fluorescence lifetime from 814 to 439 μs and from 258 to 47 μs for the ³H₄ and ³F₄ levels, respectively, due to efficient non-radiative decay. The highest quantum efficiency of 32% was obtained for the sample doped with 0.125 mol% Tm₂O₃ for the ³H₄ level. Results show that cross relaxation becomes important as the ion concentration is increased, leading to the quenching of the 1460-nm band and enhancement of the 1860-nm emission. The highest emission cross section of 6.85×10^?21 cm² measured for the 1860-nm band reveals the potential of this host for the development of 2-μm lasers in bulk glass as well as fiber media.     

Preparation,heat treatment and photoluminescence properties of V-doped ZnO–SiO2–B2O3 glasses

Four glasses in ZnO–SiO₂–B₂O₃ ternary system were prepared by the melt quenching method with the objective of optimizing sub-nanosecond emission over the UV region of zinc borosilicate glasses used in superfast scintillators. The effect of vanadium addition and heat treatment on phase formation, microstructure and photoluminescence properties of the glasses was characterized by means of DTA, XRD, SEM and fluorescence spectrophotometer. Vanadium contributed to the near-band-edge emission in two ways, by introducing donor levels in the energy band of ZnO particles and by facilitating the precipitation of ZnO and willemite crystals. Furthermore, nucleation of willemite and zinc oxide phases, which are both the origins of the intense emission bands in the UV region, was facilitated with increasing either the time or temperature of heat treatments. Photoluminescence spectra showed the elimination of the visible emission band which is favorable in scintillating glasses.