Postbuckling of FGM plates with piezoelectric actuators under thermo-electro-mechanical loadings

A postbuckling analysis is presented for a simply supported, shear deformable functionally graded plate with piezoelectric actuators subjected to the combined action of mechanical, electrical and thermal loads. The temperature field considered is assumed to be of uniform distribution over the plate surface and through the plate thickness and the electric field considered only has non-zero-valued component E_Z. The material properties of functionally graded materials (FGMs) are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents, and the material properties of both FGM and piezoelectric layers are assumed to be temperature-dependent. The governing equations are based on a higher order shear deformation plate theory that includes thermo-piezoelectric effects. The initial geometric imperfection of the plate is taken into account. Two cases of the in-plane boundary conditions are considered. A two step perturbation technique is employed to determine buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling behavior of perfect and imperfect, geometrically mid-plane symmetric FGM plates with fully covered or embedded piezoelectric actuators under different sets of thermal and electric loading conditions. The effects played by temperature rise, volume fraction distribution, applied voltage, the character of in-plane boundary conditions, as well as initial geometric imperfections are studied.     

Postbuckling analysis of axially loaded functionally graded cylindrical panels in thermal environments

A postbuckling analysis is presented for a functionally graded cylindrical panel of finite length subjected to axial compression in thermal environments. Material properties are assumed to be temperature dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The governing equations of a functionally graded cylindrical panel are based on Reddy’s higher order shear deformation shell theory with a von Kármán–Donnell-type of kinematic nonlinearity and including thermal effects. Two cases of the in-plane boundary conditions are considered. The nonlinear prebuckling deformations and initial geometric imperfections of the panel are both taken into account. A boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, large deflections in the postbuckling range, and initial geometric imperfections of the shell, is extended to the case of functionally graded cylindrical panels under axial compression. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling behavior of axially loaded, perfect and imperfect, functional graded cylindrical panels with two constituent materials and under different sets of thermal environments. The influences played by temperature rise, volume fraction distributions, the character of in-plane boundary conditions, transverse shear deformation, panel geometric parameters, as well as initial geometric imperfections are studied.     

Buckling and postbuckling behavior of antisymmetrically angle-ply laminated composite plates

The buckling and postbuckling behaviors of perfect and imperfect antisymmetricallyangle-ply laminated composite plates under uniaxial compression have been studied byperturbation technique which takes deflection as its perturbation parameter.In this paper,the effects of in-plane boundary conditions,angles,total number oflayers and initial geometric imperfection on the postbuckling behavior of laminated plateshave been discussed.     

ELASTO-PLASTIC DYNAMIC BUCKLING AND POSTBUCKLING OF SQUARE PLATES UNDER SOLID-FLUID SLAMMING

The elasto-plastic dynamic buckling and postbuckling phenomena ofsquare plates subjected to in-plane solid-fluid slamming are investigated.According tothe plate's response,the critical criteria for dynamic buckling,dynamic plasticity andplasti(?)collapse are defined,and the corresponding critical impulses are presented.Meanwhile,dynamic buckling modes and collapse models are observed.The effects ofdifferent boundary conditions and loading histories on the properties of buckling andpostbuckling are discussed.     

Thermo-piezoelectric effects on the postbuckling of axially-loaded hybrid laminated cylindrical panels

IntroductionCompositelaminatedcylindricalpanelhasbeenusedextensivelyasastructuralconfiguration,mainlyintheaerospaceindustry .Oneoftherecentadvancesinmaterialandstructuralengineeringisinthefieldofsmartstructureswhichincorporatesadaptivematerials.Bytakingadvantageofthedirectandconversepiezoelectriceffects,piezoelectriccompositestructurescancombinethetraditionalperformanceadvantagesofcompositelaminatesalongwiththeinherentcapabilityofpiezoelectricmaterialstoadapttotheircurrentenvironment.Therefore…     

Postbuckling of imperfect rectangular composite plates under inplane shear closed-form approximate solutions

In this paper, the postbuckling behavior of rectangular orthotropic laminated composite plates with initial imperfections under inplane shear load is investigated in a closed-form analytical manner. The plates under consideration are assumed to be infinitely long in the longitudinal direction. At the longitudinal edges, two different sets of boundary conditions are considered, specifically 1) simply supported edges and 2) fully clamped edges. Using Timoshenko-type shape functions for both the initial bifurcational buckling analysis and the subsequent Marguerre-type postbuckling studies, closed-form analytical solutions for the buckling loads and for the postbuckling state variables are derived. A comparison with geometrically non-linear finite element computations shows that the derived analysis approaches are suitable for postbuckling studies in load ranges not too far beyond bifurcational buckling as they are currently relevant for e.g., composite airframe structural analysis and design. Due to their strictly closed-form analytical nature, the presented analysis methods can be used conveniently in engineering practice for all application purposes where computational time is a crucial factor, especially for preliminary analysis and design or optimization procedures.     

任意外型薄板非线性后屈曲问题的边界元解

本文就薄板后屈曲问题建立一组新型的边界元计算公式，用这组公式求解能方便处理各种边界问题，另外文中将面内应力分解成基本部份和附加部份，并利用微分算子分解理论导得了挠度的一个不同形式的基本解，由于计算公式中，实现了面内位移和挠度的解耦，从而使迭代过程得到简化，文末还对圆板后屈曲路径进行了计算，得到了满意的结果。     

剪切变形对FGM圆板轴对称屈曲的影响

基于一阶剪切变形板理论，推导了功能梯度材料圆形板在边界面内均布压力作用下的轴对称屈曲方程。在推导过程中，忽略了前屈曲耦合变形。利用一阶板理论与经典板理论屈曲方程之间在数学形式上的相似性，得到了一阶板理论下功能梯度材料圆板与经典板理论下均匀圆板临界屈曲载荷之间的解析关系。利用这个解析关系，可以直接从已有的较为简单的经典理论的结果，获得一阶板理论下功能梯度材料板的临界屈曲载荷。     

Stability and vibration of shear deformable plates––first order and higher order analyses

This work presents the highly accurate numerical calculation of the natural frequencies and buckling loads for thick elastic rectangular plates with various combinations of boundary conditions. The Reissener–Mindlin first order shear deformation plate theory and the higher order shear deformation plate theory of Reddy have been applied to the plate’s analysis. The governing equations and the boundary conditions are derived using the dynamic version of the principle of minimum of the total energy. The solution is obtained by the extended Kantorovich method. This approach is combined with the exact element method for the vibration and stability analysis of compressed members, which provides for the derivation of the exact dynamic stiffness matrix including the effect of in-plane and inertia forces. The large number of numerical examples demonstrates the applicability and versatility of the present method. The results obtained by both shear deformation theories are compared with those obtained by the classical thin plate’s theory and with published results. Many new results are given too.     

Thermal buckling and postbuckling of laminated composite beams with temperature-dependent properties

The thermal buckling and postbuckling analysis of laminated composite beams with temperature-dependent material properties is presented. The governing equations are based on the first-order shear deformation beam theory (FSDT) and the geometrical nonlinearity is modeled using Green's strain tensor in conjunction with the von Karman assumptions. The differential quadrature method (DQM) as an accurate, simple and computationally efficient numerical tool is adopted to discretize the governing equations and the related boundary conditions. A direct iterative method is employed to obtain the critical temperature (bifurcation point) as well as the nonlinear equilibrium path (the postbuckling behavior) of symmetrically laminated beams. The applicability, rapid rate of convergence and high accuracy of the method are established via different examples and by comparing the results with those of existing in literature. Then, the effects of temperature dependence of the material properties, boundary conditions, length-to-thickness ratios, number of layers and ply angle on the thermal buckling and postbuckling characteristic of symmetrically laminated beams are investigated.     

Coupled buckling and postbuckling analysis of active laminated piezoelectric composite plates

A theoretical framework for analyzing the pre- and postbuckling response of composite laminates and plates with piezoactuators and sensors is presented. The mechanics include nonlinear effects due to large rotations and stress stiffening, and are incorporated into a coupled mixed-field piezoelectric laminate theory. Using the previous mechanics, a nonlinear finite element method and an incremental-iterative solution are formulated for the analysis of nonlinear adaptive plate structures subject to in-plane electromechanical loading. A novel eight-node nonlinear plate finite element is also developed. Evaluation cases predict the buckling and postbuckling response of adaptive composite beams and plates with piezoelectric actuators and sensors. The case of piezoelectric buckling and postbuckling induced by the actuators is addressed and quantified. Finally, the possibility to actively mitigate the mechanical buckling and postbuckling response of adaptive piezocomposite plates is illustrated.     

Influence of corner stresses on the stability characteristics of composite skew plates

Stability characteristics of composite skew plates subjected to in-plane compressive load are investigated here using the shear deformable finite element approach. The influences of high prebuckling stresses at the corner regions of isotropic and composite skew plates on their stability characteristics are emphasized for different load direction, boundary condition and laminate stacking sequence. The non-linear governing equations based on von Kármán's assumptions are solved by Newton-Raphson technique to get the hitherto unreported postbuckling equilibrium paths of composite skew plates loaded between two rigid flat platens. The variation of out-of-plane deformation and end-shortening with compressive in-plane load are examined for simply supported and clamped skew plates made of isotropic, symmetric and unsymmetric laminates. Marguerre's shallow shell theory is employed to study the effect of sinusoidal imperfection on the non-linear behavior of composite skew plates.     

Elasto-plastic analysis for the buckling and postbuckling of rectangular plates under uniaxial compression

Full-range analysis for the buckling and postbuckling of rectangular plates under in-plane compression has been made by perturbation technique which takes deflection as itsperturbation parameter.In this paper the effects of initial geometric imperfection on the postbuckling behaviorof plates have been discussed.It is seen that the effect of initial imperfection on the inelasticpostbuckling of plates is sensitive.By comparison,it is found that the theoretical results ofthis paper are in good agreement with experiments.     

具有分层损伤的不同加筋形式复合材料层合板的后屈曲性态研究

基于板的一阶剪切理论和V on-K arm an大挠度理论,分别推导了复合材料层合板和层合梁的几何非线性有限元列式,提出了含嵌入分层的复合材料加筋层合板在受压缩载荷作用下的后屈曲有限元分析方法,对在板厚方向具有不同分层位置的加筋板结构进行了有限元数值分析,研究了不同的加筋方式及筋的分布对具有分层损伤的复合材料加筋层合板的后屈曲性态的影响,所得结果对确定在压缩载荷作用下含损伤复合材料加筋层合板的剩余承载能力具有参考价值。     

Perturbation analyses for the postbuckling of simply supported rectangular plates under uniaxial compression

In this paper, applving perturbation method to von Kármán nonlinear large deflection equations of plates by taking deflection as perturbation parameter, the posibuckling behavior of simply supported rectangular plates under uniaxial compresion is investigated. Two types of in-plane boundary conditions are now considered and the effects of initial imperfections are also studied. It is found that the theoretical results are in good agreement with experiments. The method suggested in this paper which has not been found in previous papers is rather simple and easy for the postbuckling analysis of rectangular plates.     

开孔平板的剪切稳定性实验

对四边简支和四周边受均匀剪切力的矩形薄平板的屈曲失稳,作了实验分析及数值计算.用作者所设计的剪切试验装置,对一组开孔及开孔后加强的薄平板进行了剪切稳定性试验,求得薄平板失稳时的载荷——挠度曲线及失稳波形,由曲线上拐点来确定平板失稳临界载荷,并将实验结果与有限元数值计算结果作了比较.     

Non-linear design and control optimization of composite laminated plates with buckling and postbuckling objectives

Multiobjective design and control optimization of composite laminated plates is presented to minimize the postbuckling dynamic response and maximize the buckling load. The control objective aims at dissipating the postbuckling elastic energy of the laminate with the minimum possible expenditure of control energy using a closed-loop distributed force. The layer thicknesses and fiber orientations are taken as design variables. The objectives of the optimization problem are formulated based on a shear deformation theory including the von-Karman non-linear effect for various cases of boundary conditions. The non-linear control problem is solved iteratively until an appropriate convergence criterion is satisfied based on Liapunov–Bellman theory. Liapunov function is taken as a sum of positive definite functions with different degrees. Comparative examples for three-layer symmetric and four-layer antisymmetric laminates are given for various cases of edges conditions. Graphical study is carried out to assess the accuracy of results obtained due to the successive iterations. The influences of the boundary conditions, orthotropy ratio, shear deformation, aspect ratio on the laminate optimal design are elucidated.     

Perturbation analysis for the postbuckling of rectangular orthotropic plates

In this paper, applying perturbation method to von Kármán-type nonlinear large deflection equations of orthotropic plates by taking deflection as perturbation parameter, thé postbuckling behavior of simply supported rectangular orthotropic plates under inplane compression is investigated. Two types of in-plane boundary conditions are now considered and the effects of initial imperfections are also studied. Numerical results are presented for various cases of orthotropic composite plates having different elastic properties. It is found that the results obtained are in good agreement with those of experiments.     

Postbuckling of long unsymmetrically laminated composite plates under axial compression

An approximate solution is given for the postbuckling of infinitely long and unsymmetrically laminated composite plates. This solution is obtained by superposing a polynomial transverse displacement given by bending due to unsymmetric laminate configurations and a simple functional representation for the buckling mode in conjunction with the Galerkin method. Nondimensional parameters are used to express the approximate solution in a very simple and clear formulation. The results given by this solution for axial compression in the longitudinal direction are compared with the results given by the nonlinear finite element method (FEM) for finite length rectangular long plates. The influence of the boundary conditions on postbuckling response is also studied. For the FEM analysis, two different simply supported boundary conditions on the long edges of the plate are considered. It is found that these two sets of boundary conditions give different results for the buckling and postbuckling finite element analysis. In most cases the FEM analysis overestimate and, respectively, underestimate the approximate closed form solution, depending on the type of simply supported boundary condition considered. Thus, the approximate solution appears useful for design purposes as an averaged quantity between the two FEM analyses. Also, it is found that the reduced bending stiffness method can be successfully used for determining the approximate solution.     

Postbuckling and mode jumping analysis of composite laminates using an asymptotically correct, geometrically non-linear theory

An analytic method is presented in this paper to study the postbuckling and mode jumping behavior of bi-axially compressed composite laminates. The governing partial differential equations (PDEs) are derived rigorously from an asymptotically correct, geometrically non-linear theory. A novel and relatively simpler solution approach is developed to solve the two coupled fourth-order PDEs, namely, the compatibility equation and the dynamic governing equation. The generalized Galerkin method is used to solve boundary value problems corresponding to antisymmetric angle-ply and cross-ply composite plates, respectively. The variety of possible modal interactions is expressed in an explicit and concise form by transforming the coupled non-linear governing equations into a system of non-linear ordinary differential equations (ODEs).

The comparison between the present method and the finite element analysis (FEA) shows a pretty good match in their numerical results in the primary postbuckling region. While the FEA may lose its convergence when solution comes close to the secondary bifurcation point, the analytic approach has the capability of exploring deeply into the post-secondary buckling realm and capture the mode jumping phenomenon for various combinations of plate configurations and in-plane boundary conditions. Free vibration along the stable primary postbuckling and the jumped equilibrium paths are also studied.