螺型位错偶极子与圆形界面刚性线的干涉效应研究

本文重点研究螺型住错偶极子和圆形夹杂界面刚性线的弹性干涉效应。利用复变函数方法,得到了该问题的一般解;此外还求出了只含一条界面刚性线时的封闭解答,得到了刚性线尖端的应力强度因子以及作用在螺型位错偶板子中心的像力和像力偶矩。研究结果表明：位错偶板子对应力强度因子具有很强的屏蔽或反屏蔽效应;软夹杂吸引位错偶极子,而刚性线排斥位错偶板子,在一定条件下,位错偶极子在刚性线附近出现一个平衡位置;当刚性线的长度争材料剪切模量比达到临界值时,可以改变偶极子和界面之间的干涉机理;刚性线长度对位错偶极子中心像力偶矩也有很大的影响。     

Electroelastic interaction between a piezoelectric screw dislocation and a circular inhomogeneity with interfacial cracks

A piezoelectric screw dislocation in the matrix interacting with a circular inhomogeneity with interfacial cracks under antiplane shear and in-plane electric loading at infinity was dealt with. Using complex variable method, a general solution to the problem was presented. For a typical case, the closed form expressions of complex potentials in the inhomogeneity and the matrix regions and derived explicitly when the interface containsthe electroelastic field intensity factors weresingle crack. The image force acting on the piezoelectric screw dislocation was calculated by using the perturbation technique and the generalized Peach-Koehler formula. As a result, numerical analysis and discussion show that the perturbation influence of the interfacial crack on the interaction effects of the dislocation and the inhomogeneity is significant which indicates the presence of the interfacial crack will change the interaction mechanism when the length of the crack goes up to a critical value. It is also shown that soft inhomogeneity can repel the dislocation due to their intrinsic electromechanical coupling behavior.     

压电螺位错与含界面裂纹圆形涂层夹杂的干涉

研究位于基体或夹杂中任意点的压电螺型位错与含界面裂纹圆形涂层夹杂的电弹耦合干 涉问题. 运用复变函数方法,获得了基体,涂层和夹杂中复势函数的一般解答. 典型例 子给出了界面含有一条裂纹时,复势函数的精确级数形式解. 基于已获得的复势函数和广 义Peach-Koehler公式,计算了作用在位错上的像力. 讨论了裂纹几何条件,涂层厚度和材 料特性对位错平衡位置的影响规律. 结果表明,界面裂纹对涂层夹杂附近的位错运动有很大 的影响效应,含界面裂纹涂层夹杂对位错的捕获能力强于完整粘结情况;并发现界面裂纹长 度和涂层材料常数达到某一个临界值时可以改变像力的方向. 解答的特殊情形包含了以 往文献的几个结果.     

A piezoelectric screw dislocation interacts with interfacial collinear rigid lines in piezoelectric bimaterials

Based on the complex variable method and perturbation technique, an analytical closed-form solution is derived for the interaction between a screw dislocation and collinear rigid lines along the interface of two dissimilar piezoelectric media under remote anti-plane mechanical and in-plane electrical loading. The rigid lines are either conducting or dielectric. The dislocation core is subjected to a line-force and a line-charge. A square-root singularity of field variables near the tip of an interfacial rigid line is observed. The rigid line extension force acting on the tip is obtained in terms of the strain and electric field intensity factor. The force on the dislocation due to the interfacial rigid line is calculated. The influence of the angular position of the dislocation, material properties and electromechanical coupling factor on the force is studied in detail.     

ANALYSIS OF A SCREW DISLOCATION INSIDE A CIRCULAR INCLUSION WITH INTERFACIAL CRACKS IN PIEZOELECTRIC COMPOSITES

IntroductionPiezoelectric materials have potentials for use in many modern devices and compositestructures. The presence of various defects, such as inclusions, holes, dislocations andcracks, can greatly influence their characteristics and coupled behavio…     

A moving screw dislocation near interfacial rigid lines in two dissimilar anisotropic media

This paper attempts to investigate the problem for the interaction between a uniformly moving screw dislocation and interface rigid lines in two dissimilar.anisotropic. materials. Integrating Riemann-Schwarz＇s symmetry principle with the analysis singularity of complex functions, we present the general elastic solutions of this problem and the closed form solutions for interfaces containing one and two rigid lines. The expressions of stress intensity factors, at the rigid line tips and image force acting on moving dislocation are derived explicitly. The results show that dislocation velocity has an antishielding effect on the rigid line tip and a larger dislocation velocity leads to the equilibrium position of dislocation closing with the rigid line. The presented solutions contain previously known results as the special cases.     

螺型位错偶极子与界面钝裂纹的干涉效应

研究了螺型位错偶极子与界面钝裂纹的干涉效应.应用保角变换技术,得到了复势函数与应力场的封闭解析解,讨论了位错偶极子方位、臂长及裂纹钝化程度对位错偶板子屏蔽效应和发射条件的影响.结果表明,与单个螺型位错不同,螺型位错偶极子与x轴夹角在一定范围内时才可以降低界面钝裂纹尖端的应力强度因子(屏蔽效应),屏蔽效应随偶板子臂长的增大而增强,随裂纹钝化程度的增大而增强,屏蔽区域也随裂纹钝化程度的增大而增大;位错偶极子发射所需的临界无穷远加载随偶极子臂长的增加而减小,随位错方位角及裂纹钝化程度的增加而增大;最可能的位错偶极子发射角度为0.螺型位错偶极子的发射比单个螺型位错的发射要困难.本文解答的特殊情况与相关文献给出的解答一致.     

The interaction between a screw dislocation and a rigid wedge inhomogeneity with an elastic circular inhomogeneity at the tip

The interaction between a screw dislocation and an elastic semi-cylindrical inhomogeneity abutting on a rigid half-plane is investigated. Utilizing the image dislocations method, the closed form solutions of the stress fields in the matrix and the inhomogeneity region are derived. The image force acting on the dislocation is also calculated. The results were used to study the interaction between a screw dislocation and a rigid wedge inhomogeneity with an elastic circular inhomogeneity at the tip by means of conformal mapping. The results show that an unstable equilibrium point of the dislocation near the semi-cylindrical inhomogeneity is found when the inhomogeneity is softer than the matrix. Moreover, the force on the dislocation is strongly affected by the position of the dislocation and the shear modulus of the semi-circular inhomogeneity. Positive screw dislocations can reduce the SIF of the rigid wedge inhomogeneity (shielding effect) only when it located in the lower half-plane. The shielding effect increases with the increase of the shear modulu of both the matrix and the inhomogeneity and increases with the increase of the wedge angle. The shielding effect (or anti-shielding effect) reaches the maximum when the dislocation tends to the wedge inhomogeneity interface.     

The interaction between a screw dislocation and a circular inhomogeneity in gradient elasticity

The interaction between a screw dislocation and a circular inhomogeneity in gradient elasticity is investigated. The screw dislocation is located inside either the inhomogeneity or the matrix. By using the Fourier transform method, closed analytical solutions are obtained when the inhomogeneity and the matrix have the same gradient coefficient. The explicit expressions of image forces exerted on screw dislocations are derived. The motion of the appointed screw dislocation and its equilibrium positions are discussed. The results show that the classical singularity is eliminated. Especially, for the case of a tiny inhomogeneity, the relation of dislocations and inhomogeneities become quite different. The screw dislocation may be attracted by the stiff inhomogeneity and repelled by the soft inhomogeneity when it tends to the interface. So there is an unstable equilibrium position when a dislocation tends to a tiny stiff inhomogeneity and there is a stable equilibrium position when a dislocation tends to a tiny soft inhomogeneity.     

The interaction between a screw dislocation and a piezoelectric fiber composite with a wedge crack

The interaction problem between a screw dislocation and a piezoelectric fiber composite with a semi-infinite wedge crack is investigated in this paper. The piezoelectric media are assumed to be transversely isotropic with the poling direction along the x ₃ direction. The screw dislocation considered here involves a Burgers vector parallel to the poling direction with a line force and a line charge being applied at the core of the dislocation. Both cases of the screw dislocation located at the matrix and inclusion are observed. The analytical derivation is based on the complex variable and the conformal mapping methods. The exact solutions are obtained to calculate the forces on the dislocation and the crack-tip stress and electric displacement intensity factors. Based on these results, the anti-shielding and shielding effects for different loadings, material combinations, and geometric configurations are discussed in detail.     

Electroelastic interaction between piezoelectric screw dislocation and circularly layered inclusion with imperfect interfaces

The interaction between a piezoelectric screw dislocation and an interphase layer in piezoelectric solids is theoretically investigated.Here,the dislocation located at arbitrary points inside either the matrix or the inclusion and the interfaces of the interphase layer are imperfect.By the complex variable method,the explicit solutions to the complex potentials are given,and the electroelastic fields can be derived from them.The image force acting on the dislocation can be obtained by the generalized PeachKoehler formula.The motion of the piezoelectric screw dislocation and its equilibrium positions are discussed for variable parameters.The important results show that,if the inner interface of the interphase layer is imperfect and the magnitude of degree of the interface imperfection reaches the certain value,two equilibrium positions of the piezoelectric screw dislocation in the matrix near the interface are found for the certain material combination which has never been observed in the previous studies(without considering the interface imperfection).     

Electroelastic interaction between a piezoelectric screw dislocation and a confocal elliptic blunt crack with elliptical inhomogeneity

The electroelastic interaction between a piezoelectric screw dislocation and an elliptical inhomogeneity containing a confocal blunt crack under infinite longitudinal shear and in-plane electric field is investigated. Using the sectionally holomorphic function theory, Cauchy singular integral, singularity analysis of complex functions and theory of Rieman boundary problem, the explicit series solution of stress field is obtained when the screw dislocation is located in inhomogeneity. The intervention law of the interaction between blunt crack and screw dislocation in inhomogeneity is discussed. The analytical expressions of generalized stress and strain field of inhomogeneity are calculated, while the image force, field intensity factors of blunt crack are also presented. Moreover, a new matrix expression of the energy release rate and generalized strain energy density (SED) are deduced. With the size variation of blunt crack, the results can be reduced to the case of the interaction between a piezoelectric screw dislocation and a line crack in inhomogeneity. Numerical analysis are then conducted to reveal the effects of the dislocation location, the size of inhomogeneity and blunt crack and the applied load on the image force, energy release rate and strain energy density. The influence of dislocation on energy release rate and strain energy density is also revealed.     

Interaction between a screw dislocation and a viscoelastic piezoelectric bimaterial interface

The complex variable method is employed to derive analytical solutions for the interaction between a piezoelectric screw dislocation and a Kelvin-type viscoelastic piezoelectric bimaterial interface. Through analytical continuation, the original boundary value problem can be reduced to an inhomogeneous first-order partial differential equation for a single function of location z = x + iy and time t defined in the lower half-plane, which is free of the screw dislocation. Once the initial, steady-state and far-field conditions are known, the solution to the first order differential equation can be obtained. From the solved function, explicit expressions are then derived for the stresses, strains, electric fields and electric displacements induced by the piezoelectric screw dislocation. Also presented is the image force acting on the screw dislocation due to its interaction with the Kelvin-type viscoelastic interface. The derived solutions are verified by comparing with existing solutions for the simplified cases, and various interesting features are observed, particularly for those associated with the image force.     

Analysis of a piezoelectric screw dislocation inside an elliptical inhomogeneity with confocal rigid line in piezoelectric material

This paper deals with the electro-elastic coupling interaction between a piezoelectric screw dislocation which is located inside the elliptical inhomogeneity and an electrically conductive confocal rigid line under remote anti-plane shear stresses and in-plane electrical loads in piezoelectric composite material. The analytical-functions of the complex potentials, stress fields and the image force acting on the piezoelectric screw dislocation are obtained based on the principle of conformal mapping, the method of series expansion, the technical of analytic continuation and the analysis of singularity of complex potentials. The rigid line and the piezoelectric material property combinations upon the image force and the equilibrium position of the dislocation are discussed in detail by the numerical computation.     

Interfacial de-bonding caused by a screw dislocation pile-up at a circular cylindrical rigid inclusion

An array of continuously-distributed screw dislocations piled up against a circular cylindrical rigid inclusion is analyzed by the complex-variable method. Both uniformly applied shearing load at infinity and internal friction stress opposing the movement of dislocations are taken into account. The pile-up tip is away from the matrix-inclusion interface, its distance from the interface being determined by the condition that the stresses should be finite everywhere in the solid. Stress distributions on the interface are determined, and de-bonding of the interface, namely the formation of initial voids or cracks, is discussed. Stress and displacement near the tip of these initial voids are then analyzed. This analysis is combined with the virtual work argument of A.A. Griffith (1920) to yield a criterion for the initial voids to grow along the interface. The critical void-growth load is expressed by the sum of two terms, one proportional to the friction stress and the other inversely proportional to the square-root of the inclusion radius.     

Interaction of a screw dislocation with an interfacial edge crack in a two-phase piezoelectric material

The interaction of a screw dislocation with an interfacial edge crack in a two-phase piezoelectric medium is investigated. Closed-form solutions of the elastic and electrical fields induced by the screw dislocation are derived using the conformal mapping method in conjunction with the image principle. Based on the electroelastic fields derived, the stress and electric displacement intensity factors, the image force acting on the dislocation are given explicitly. We find that the stress and electric displacement intensity factors depend on the effective electroelastic material constants. In the case where one of two phases is purely elastic, the stress intensity factor and image force are plotted to illustrate the influences of electromechanical coupling effect, the position of the dislocation and the material properties on the interaction mechanism. The project supported by the Doctoral Foundation of Hebei Province (B2003113)     

On the electroelastic interaction of a piezoelectric screw dislocation with an elliptical inclusion in piezoelectric materials

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｉｎｔｅｒａｃｔｉｏｎｏｆｄｉｓｌｏｃａｔｉｏｎｓｗｉｔｈｉｎｃｌｕｓｉｏｎｓｉｓｏｆｃｏｎｓｉｄｅｒａｂｌｅｉｍｐｏｒｔａｎｃｅｆｏｒｕｎｄｅｒｓｔａｎｄｉｎｇｔｈｅｐｈｙｓｉｃａｌｂｅｈａｖｉｏｒｏｆｍａｔｅｒｉａｌｓ.Ｓｕｃｈｓｔｕｄｉｅｓｃａｎｐｒｏｖｉｄｅｄｉｎｆｏｒｍａｔｉｏｎｃｏｎｃｅｒｎｉｎｇｃｅｒｔａｉｎｓｔｒｅｎｇｔｈｅｎｉｎｇｏｒｈａｒｄｅｎｉｎｇｍｅｃｈａｎｉｓｍｓｉｎｎｕｍｂｅｒｏｆｔｒａｄｉｔｉｏｎａｌａｎｄｃｏｍｐｏｓｉｔｅｍａｔｅｒｉ…     

A moving piezoelectric screw dislocation

A moving screw dislocation in a transversely isotropic piezoelectric material is investigated in detail. The analytical expressions for displacement, electric potential, stresses, electric displacements, strains, and electric fields are obtained. When the velocity of the dislocation is zero, or when the piezoelectric constant is zero, the results derived in this paper can reduce to known results.     

Elastic interaction between a semi-infinite debonded anticrack and a screw dislocation

Meccanica - We study the elastic interaction between a semi-infinite debonded anticrack lying on the negative real axis and a screw dislocation under the assumption of anti-plane mechanical...