Thermally-driven processes on rutile TiO2(1 1 0)-(1 × 1): A direct view at the atomic scale

The technological importance of TiO₂ has led to a broad effort aimed at understanding the elementary steps that underlie catalytic and photocatalytic reactions. The most stable surface, rutile TiO₂(1 1 0), in particular, has became a prototypical model for fundamental studies of TiO₂. In this critical review we have selected oxygen, water, and alcohols to evaluate recent progress relevant for applications in the areas of water splitting and oxidation of organic contaminants. We first focus on the characterization of defects and the distribution of excess charge that results from their formation. The subsequent section concentrates on the role of individual surface sites and the effect of available charge in the adsorption processes. The discussion of adsorbate dynamics follows, providing models for intrinsic and extrinsic diffusion processes as well as rotational dynamics of anchored alkoxy species. The final section summarizes our current understanding of TiO₂(1 1 0) catalyzed reactions between water, oxygen, and their dissociation products.     

Synthesis,characterization and thermochemistry of Cs(ASP) · nH2O (n = 0, 1)

New compounds of aspartic acid Cs(ASP) · nH₂O (n = 0, 1) have been synthesized and characterized by XRD, IR and Raman spectroscopy as well as TG. The structural formula of this new compound was Cs(ASP) · nH₂O (n = 0, 1). The enthalpy of solution of Cs(ASP) · nH₂O (n = 0, 1) in water were determined. With the incorporation of the standard molar enthalpies of formation of CsOH(aq) and ASP(s), the standard molar enthalpy of formation of −(1202.9 ± 0.2) kJ · mol⁻¹ of Cs(ASP) and −(1490.7 ± 0.2) kJ · mol⁻¹ of Cs(ASP) · H₂O were obtained.     

(Vapour + liquid) equilibria for the binary mixtures (cis-pinane + α-pinene) and (cis-pinane + 1-butanol)

The isothermal and isobaric (vapour + liquid) equilibria for (cis-pinane + α-pinene) and (cis-pinane + 1-butanol) measured with an inclined ebulliometer are presented. The experimental results are analysed using the UNIQUAC equation with the temperature-dependence binary parameters with satisfactory results. Experimental vapour pressures of cis-pinane are also included.     

Protonation thermodynamics of some aminophenol derivatives in NaCl(aq) (0 ⩽ I ⩽3 mol · kg−1) at T = 298.15 K

The acid–base properties of four aminophenol derivatives, namely m-aminophenol (L1), 4-amino-2-hydroxytoluene (L2), 2-amino-5-ethylphenol (L3) and 5-amino-4-chloro-o-cresol (L4), are studied by potentiometric and titration calorimetric measurements in NaCl_(aq) (0 ? I ? 3 mol · kg^?1) at T = 298.15 K. The dependence of the protonation constants on ionic strength is modelled by the Debye–Hückel, SIT (Specific ion Interaction Theory) and Pitzer equations. Therefore, the values of protonation constants at infinite dilution and the relative interaction coefficients are calculated. The dependence of protonation enthalpies on ionic strength is also determined. Distribution (2-methyl-1-propanol/aqueous solution) measurements allowed us to determine the Setschenow coefficients and the activity coefficients of neutral species. Experimental results show that these compounds behave in a very similar way, and common class parameters are reported, in particular for the dependence on ionic strength of both protonation constants and protonation enthalpies.     

Viscosity of {xCO2 + (1 − x)CH4} with x = 0.5174 for temperatures between (229 and 348) K and pressures between (1 and 32) MPa

A vibrating wire instrument, in which the wire was clamped at both ends, was used to measure the viscosity of {xCO₂ + (1 − x)CH₄} with x = 0.5174 with a combined uncertainty of 0.24 μPa · s (a relative uncertainty of about 0.8 %) at temperatures T between (229 and 348) K and pressures p from (1 to 32) MPa. The corresponding mass density ρ, estimated with the GERG-2008 equation of state, varied from (20 to 600) kg · m⁻³. The measured viscosities were consistent within combined uncertainties with data obtained previously for this system using entirely different experimental techniques. The new data were compared with three corresponding states-type models frequently used for predicting mixture viscosities: the Extended Corresponding States (ECS) model implemented in REFPROP 9.1; the SUPERTRAPP model implemented in MultiFlash 4.4; and a corresponding states model derived from molecular dynamics simulations of Lennard Jones fluids. The measured viscosities deviated systematically from the predictions of both the ECS and SUPERTRAPP models with a maximum relative deviations of 11 % at (229 K, 600 kg · m⁻³) and −16 % at (258 K, 470 kg · m⁻³), respectively. In contrast, the molecular dynamics based corresponding states model, which is predictive for mixtures in that it does not contain any binary interaction parameters, reproduced the density and temperature dependence of the measured viscosities well, with relative deviations of less than 4.2 %.     

(Liquid + liquid) equilibria for (water + 1-propanol or acetone + β-citronellol) at different temperatures

On this paper, experimental (liquid + liquid) equilibrium (LLE) results are presented for systems composed of β-citronellol and aqueous 1-propanol or acetone. To evaluate the phase separation properties of β-citronellol in aqueous mixtures, LLE values for the ternary systems (water + 1-propanol + β-citronellol) and (water + acetone + β-citronellol) were determined with a tie-line method at T = (283.15, 298.15, and 313.15 ± 0.02) K and atmospheric pressure. The reliability of the experimental tie-lines was verified by the Hand and Bachman equations. Ternary phase diagrams, distribution ratios of 1-propanol and acetone in the mixtures are shown. The effect of the temperature on the ternary (liquid + liquid) equilibria was examined and discussed. The experimental LLE values were satisfactorily correlated by extended UNIQUAC and modified UNIQUAC models.     

Gas-tight proton-conducting Nd2 − xCaxZr2O7 − δ (x = 0, 0.05) ceramics

Journal of Solid State Electrochemistry - Gas-tight Nd2 − xCaxZr2O7 − δ (x = 0, 0.05) pyrochlore materials have been prepared via...     

Selective synthesis of zigzag-type aligned carbon nanotubes on SiC (0 0 0 −1) wafers

Zigzag-type carbon nanotubes have been selectively produced by surface decomposition of a well-polished SiC single crystal. The SiC wafer was heated to 1500 °C at a very small heating rate under vacuum. Transmission electron microscopy (TEM) and electron diffraction patterns revealed that almost all the well-aligned carbon nanotubes formed perpendicular to the SiC (0 0 0 −1) surface were double-walled and of zigzag type. The results of high-resolution electron microscopy (HREM) indicate that the zigzag type structure evolves from the Si–C hexagonal networks in the SiC crystal by the collapse of carbon layers remaining after the process of decomposition.     

Modelling (vapour + liquid) and (vapour + liquid + liquid) equilibria of {water (H2O) + methanol (MeOH) + dimethyl ether (DME) + carbon dioxide (CO2)} quaternary system using the Peng–Robinson EoS with Wong–Sandler mixing rule

The (vapour + liquid) equilibria (VLE) and (vapour + liquid + liquid) equilibria (VLLE) binary data from literature were correlated using the Peng–Robinson (PR) equation of state (EoS) with the Wong–Sandler mixing rule (WS). Two group contribution activity models were used in the PRWS: UNIFAC–PSRK and UNIFAC–Lby. The systems were successfully extrapolated from the binary systems to ternary and quaternary systems. Results indicate that the PRWS–UNIFAC–PSRK generally displays a better performance than the PRWS–UNIFAC–Lby.     

Thermodynamic study of (alkyl esters + α,ω-alkyl dihalides) III. HmEandVmE for 20 binary mixtures {xCu − 1H2u − 1CO2C4H9 + (1 − x)α,ω-ClCH2(CH2)v − 2CH2Cl}, where u = 1 to 4, α = 1 and v = ω = 2 to 6

In this article, the experimental data of excess molar enthalpies $H_{\mathrm{m}}^{\mathrm{E}}$ and excess molar volumes $V_{\mathrm{m}}^{\mathrm{E}}$ are presented for a set of 20 binary mixtures comprised of the first four butyl alkanoates (methanoate to butanoate) and five α,ω-dichloroalkanes (1,2-dichloroethane to 1,6-dichlorohexane), obtained at atmospheric pressure and at a temperature of 298.15 K. The results indicate the existence of specific interactions between both kinds of compounds resulting in exothermic processes for most mixtures, except for those containing butyl methanoate which give rise to net endo/exothermic effects. The $V_{\mathrm{m}}^{\mathrm{E}}$ are positive for mixtures of (butyl esters + 1,2-dichloroethane or 1,3-dichloropropane) and negative for the remaining ones. The change in $H_{\mathrm{m}}^{\mathrm{E}}$ with the dichloroethane chain length for a same ester is regular although the $V_{\mathrm{m}}^{\mathrm{E}}$ presents an irregular variation. It can, therefore, be deuced from this that the mixing process involves both effects, exothermic/endothermic and expansion/contraction, simultaneously. The behaviour of the mixtures is interpreted on the basis of the results observed and attributed to different effects taking place among the molecules studied.To improve application of the UNIFAC model using the version of Dang and Tassios, average values were recalculated again for parameters of the ester/chloride interaction, distinguishing, during its application, the functional group of the acid part of the ester. In spite of this, the model does not adequately reproduce the systems’ behaviour.     

Ternary mutual diffusion coefficients of aqueous {l-dopa (1) + β-CD (2)} solutions at T = 298.15 K

Ternary mutual diffusion coefficients (D₁₁, D₂₂, D₁₂ and D₂₁) measured by the Taylor dispersion method are reported for aqueous solutions of {levodopa (l-dopa) + β-cyclodextrin (β-CD)} solutions at T = 298.15 K and concentrations up to 0.007 mol · dm⁻³. Significant effects on the diffusion were observed, suggesting interactions between this carbohydrate and l-dopa. Support for this came from ¹H NMR spectroscopy, which shows that these effects are due to formation of 1:1 (β-CD:l-dopa) complexes.     

Inhomogeneous magnetism studied by ESR in La1-xSrxMnO3 (0.45 ≤ x ≤ 0.62)

The influence of strontium substitution on lanthanum site in La_1-xSr_xMnO₃ manganites has been investigated with x ranging from 0.55 to 0.62 in the 130–400 K temperature range. Powder X-ray diffraction reveals structural changes from rhomboedral to tetragonal and to orthorhombic structures upon increasing Sr substitution. Magnetic properties also show a rich variety of phases and behaviors, including coexistence of phases above Curie temperature. The electron spin resonance measurements allow quantifying paramagnetic phases and properties with randomly distributed spins and ferromagnetic phases or inclusions with oriented spins giving rise to a local magnetic field. When x = 0.55, 0.57, the ferromagnetic state is the minor phase embedded in a paramagnetic matrix. Conversely, when x increases, the ferromagnetic phase grows and becomes the only phase observed for x = 0.62.