光纤应变监测系统的数据处理方法研究

光纤应变监测系统的数据不可避免的存在噪声,导致系统的虚假预警。为了有效的消除数据噪声,提高数据准确性,减小系统的预警误报,提出了一种新的数据处理方法。首先对应变数据进行小波多层滤波处理,然后用FFT低通滤波获得信号的轮廓,再用小波滤波后的信号减去FFT低通滤波后的信号,得到消除温度影响后的应变变化信号。结果表明：该方法能够有效减小温度与噪声的影响,提高光纤应变监测系统的准确率。     

光突发交换中交换矩阵配置时间的影响研究

光突发交换是近几年出现的一种很有前途的交换技术。在光突发交换网络的核心节点中,光交换矩阵是一个关键部件,其配置时间影响到光突发交换网络的性能。这种影响表现在对数据信道可用时间施加了限制。在考虑光交换矩阵配置时间的基础上给出了修正后的LAUC算法,并通过计算机仿真研究了这种配置时间对光突发交换性能的影响。结果表明,光交换矩阵配置时间的增大会导致输出数据信道利用率的降低,进而增大了数据丢失率。     

Design of Two-Dimensional Optimized Banyan Networks

A smart two-dimensional optical Banyan network is proposed. Polarization switching logic of light is applied for the design of this network. The main element for the connections of the network is an optical crossbar switch that is composed of a half-wave plate, a programmable polarization switch, and a couple of birefringent plates. By the proposed optical crossbar switches, all permutations of the link patterns required in the network are generated due to the optimized design of the switching logic. As a result, complicated routing control of ordinary Banyan networks is much reduced and a simple two-dimensional optical Banyan network with straight interconnections between successive stages of the networks can be realized.     

荧光寿命的快速傅里叶变换拟合方法

介绍了一种利用快速傅里叶变换算法对稀土掺杂物质的荧光寿命进行数据拟合的方法。稀土掺杂物质可用来制备多种光学传感器,用于温度、pH值等多种参量测量领域。本方法利用快速傅里叶变换(FFT)结果作为基础,从非零项的相位角的正切值得出被测的荧光寿命,具有速度快、误差小、不受本底干扰等一系列优点。以掺铒光纤为例,通过数字仿真将本方法与其它几种传统的拟合方法进行了比较。快速傅里叶变换方法的测量偏差不到Prony方法的50％,为对数似合(log-fit)方法测量偏差的1／6。另外,快速傅里叶变换方法由于不受本底噪声影响,可以不必在信号处理时去掉本底噪声,因而可以明显缩短测量时间。     

相移干涉计量中相移器的原路相干相位检测标定

A new all-optical clock extraction scheme based on an asymmetric nonlinear optical loop mirror (NOLM) is proposed and demonstrated experimentally. The proposed scheme can operate at a relatively low switching power (only 0.3 Pπ is required for the clock pulse, where Pπ means the required switching power for the maximum switching in the asymmetric NOLM) and a relatively low input clock to data ratio (2～2.5). The proposed scheme is promising for clock extraction in the future ultrahigh-speed self-clocked OTDM network.     

Asymmetric Nonlinear Optical Loop Mirror for All Optical Clock Extraction in Self-clocked Optical Transparent OTDM Network

１ＩｎｔｒｏｄｕｃｔｉｏｎＡｓａｅｆｅｃｔｉｖｅｗａｙｔｏｔａｋｅｆｕｌａｄｖａｎｔａｇｅｓｏｆｔｈｅｂａｎｄｗｉｄｔｈｏｆｔｈｅｆｉｂｅｒ,ｏｐｔｉｃａｌｔｉｍｅｄｉｖｉｓｉｏｎｍｕｌｔｉｐｌｅｘｉｎｇ（ＯＴＤＭ）ｔｅｃｈｎｏｌｏｇｙｈａｓｂｅｎｗ...     

与偏振无关的双向3×3光开关结构设计

利用传统成熟的偏振控制技术,设计了一种由偏振光分束器、相位型空间光调制器、反射镜和四分之一波片构成的3×3光开关。该光开关具有结构紧凑规整、功能的实现与信号光的偏振态无关以及可以完成双向交换等特点。根据其路由控制表对该3×3光开关交换模块功能的实现进行了分析,结果表明,通过对各相位型空间光调制器状态的调整,控制通过其信号光的偏振态,完成信号光的路由,该交换模块可以完成输入信号光的全排列无阻塞输出与交换。同时,该交换模块具有一定的扩容和重构能力,对于构建大规模的交换矩阵具有一定的作用。     

全混洗交换Omega互连网络的光学实现

本文提出了一种由左、右全混洗和空间光开关列阵组成的等效Omega网络;成功地设计了一种实现全混洗互连的低损耗,等程的光学组合棱镜.由两块光学组合棱镜和空间光开关列阵组合成的光学系统实现了全混洗交换光学互连网络,该光学互连网络已在实验中得到了证实.     

All optical read only memory with frequency encoded addressing technique

A semiconductor amplifier (SOA) based all optical read only memory (ROM) is proposed and discussed using non linear polarization rotation. The ROM based on 2-4 line decoder is based on frequency encoded addressing technique, which has several advantages over other encoding techniques. The SOA has sufficiently high switching speed with property of efficient ON/OFF contrast ratio, which makes it attractive for all optical processors in computation and communication. The author has discussed the addressing and storing of the characters of American standard code for exchange of information.     

光梯度力驱动的纳米硅基光开关

通过一道光改变另一道光的传输路线是光子集成网络中重要而长远的目标, 然而, 由于硅材料的光学非线性较弱, 在硅材料上实现开关的全光控制难以实现. 因此本文提出了一种由光梯度力驱动的纳米硅基光开关, 实现了硅基光开关的全光控制. 该光开关由一个部分悬空的微环谐振器和一个交叉波导结构构成, 当通入一道控制光时, 悬空的微环谐振器在光梯度力的作用下发生弯曲, 微环谐振器的谐振波长随之发生变化, 从而实现光信号的传输路线发生改变. 该光开关利用纳米光子制造技术在标准绝缘体上硅晶圆上制造, 实验数据得出其最小消光比为10.67 dB, 最大串扰为 -11.01 dB, 开关时间分别为180 ns和170 ns. 该光开关具有尺寸小, 响应速度快, 低损耗和可拓展等优点, 在片上集成光路、高速信号处理以及下一代光纤通信网络中具有潜在应用.     

Wavelength Switching of a Fabry-Perot Semiconductor Laser by Optical Input Pulses

Wavelength switchings of a Fabry-Perot semiconductor laser are experimentally demonstrated by applying externally optical input pulses detuned from a cavity-resonant wavelength of the semiconductor laser with a constant injection current. The wavelength region of optical switching ranges from less than 0.1 nm to several nm over gain spectrum, being locked to the wavelength of optical inputs. These behaviors are based on multistability and multi-split branches in the optical output versus detuned optical input characteristics, caused by the carrier-induced refractive index change accompanied by optical injections. The experimental results are believed to be useful for wavelength division multiplexing and exchange in optical communication.     

Design and Performance Evaluation of Optical Ethernet Switching Architecture with Liquid Crystal on Silicon-Based Beam-Steering Technology

A non-blocking optical Ethernet switching architecture with liquid crystal on a silicon-based beam-steering switch and optical output buffer strategies are proposed. For preserving service packet sequencing and fairness of routing sequence, priority and round-robin algorithms are adopted at the optical output buffer in this research. Four methods were used to implement tunable fiber delay modules for the optical output buffers to handle Ethernet packets with variable bit-rates. The results reported are based on the simulations performed to evaluate the proposed switching architecture with traffic analysis under a traffic model captured from a real-core network.     

高速切换紧凑型双视场无热化红外光学系统设计

采用透射二次成像光学系统结构形式,实现了远射比为1,F数为1.67,变倍比为4.6的红外双视场光学系统设计。采用光学元件切换变倍方式,配合电磁阀切换机构实现了60 ms的变倍速率;采用光学被动补偿方式,通过适当的光学和结构材料匹配,实现了-40~+50℃无热化设计。设计结果表明：光学系统在不同温度下各视场调制传递函数在特征频率为20 lp/mm时接近衍射极限,空间排布紧凑,视场切换速度快,该双视场红外光学系统满足应用需求。     

Ultra-Low Threshold Optical Bistability and Multi-Stability in Dielecrtric Slab Doped with Semiconductor Quantum Well

A scheme for switching of the optical bistability (OB) and multi-stability (OM) in a dielectric slab doped with a three-level ladder-configuration n-doped semiconductor quantum well is simulated. It is shown that the bistable behavior of the system in dielectric slab can be controlled via amplitude or relative phase of applied fields. This optical system may provide some new possibilities for test the switching process.     

All-optical parallel data and address recovery scheme

In this paper, we have presented a parallel system model to recover data and address based on terahertz optical asymmetric demultiplexer (TOAD)/semiconductor optical amplifier (SOA)-assisted Sagnac gate. The architecture is based on a system which has its input information containing data and address. Here, we first convert the original data into a coded form with the help of input address. Then the coded information is transmitted through the optical routing channel. At the receiver end, the model simultaneously extracts data and address at any point of the routing channel. The operations of the circuits are studied theoretically and analyzed through numerical simulations. The variation of contrast ratio, amplitude modulation, extinction ratio and bit error rate with control pulse energy and switching crosstalk with gain ratio has been thoroughly investigated.     

光分组交换网络中多组光正交码组合光标签识别处理及实验

报道了光分组交换网络中基于多组光正交码组合光标签的识别与接收实验,光标签采用了码长为19,码重为3的2组光正交码组合光标签方案.给出了基于多组光正交码光标签的光分组交换网络(MOOC-OPS)基本原理,通过分析指出在MOOC-OPS网络中处理多组在时域上非连续、随机、突发光标签是现实MOOC-OPS关键技术之一.设计出了基于展宽网络和放大器级联方式接收多组低功率窄脉冲(MOOC-OPS网络的光标签)的实验方案,完成了实验电路板制作与实验验证.实验结果表明成功地实现了MOOC-OPS网络中周期为2ns基于多组光正交码光标签脉冲的识别接收,验证了该方案的可行性.     

LiNbO3马赫曾德尔调制器任意偏置工作点锁定技术的研究

在传统LiNbO3马赫曾德尔调制器偏置控制理论的基础上,提出了一种基于快速傅里叶变换(FFT)算法和低频小信号扰动的谐波响应反馈控制方法,实现了一种与调制器输入光功率及插入损耗无关、任意工作点可偏置并锁定的精密光电控制系统。利用比例积分微分（PID）控制方法,实现了任意工作点偏移小于0.5°的控制精度,实验结果亦证明该控制系统能够实现强度调制器任意工作点的偏置及锁定。这些结果对于将LiNbO3强度调制器稳定在最佳工作点并实现高速长距光纤通信系统是很有帮助的。     

应用光学双稳原理的高精度光纤传感器

本文提出一种光纤干涉仪与光电混合光双稳装置相结合的新型光纤传感器.用光双稳开关脉冲计数度量温度变化,其测量精度比基于干涉条纹计数的一般干涉型光纤传感器的精度约高10～100倍,而且测量精度可调节.完成了这种传感器原理的模拟实验验证.     

ATMOS (ATM optical switching)—system perspective

The expected traffic growth from new broadband services will require network capacities that can be beneficially provided by optical WDM transport networks. Optical packet techniques are essential for large networks to provide flexibility and granularity. A layered network architecture with a transparent optical layer and optical packet layers has been elaborated. Four switching concept options for large optical ATM switch fabrics in the public network and small access nodes are presented. The technology for the related key functions of space and wavelength switching was developed in the RACE ATMOS project and the feasibility of concepts and technologies was verified in four system demonstrators.     

SOA-assisted Sagnac switch and investigation of its roadmap from 10 to 40 GHz

Future broadband optical communications networks will rely on all-optical switches to perform a set of processing functions exclusively in the optical domain. Interferometric optical switches using semiconductor optical amplifier (SOA) nonlinearities can perform efficient optical switching with few tens of fJ control energies and short fiber lengths allowing for monolithic integration. In this paper we present work performed with a three terminal SOA-assisted Sagnac interferometer. We review all-optical Boolean AND and XOR logic results at 10 GHz and 10 Gb/s for full duty cycle and pseudo-random data pattern operation, respectively, achieved with adequate contrast ratios, remarkably low switching energies and low pattern dependence. The ability of the device to be cascaded was proved up to 10 GHz by recirculating stably for hours arbitrary pattern profiles. Finally, and in view of the extension of photonic networks single channel data rates beyond 40 Gb/s, the performance of the switch was simulated in terms of its critical parameters. The obtained results showed that full switching operation at 40 GHz or higher is feasible either by deploying gain recovery reduction techniques in bulk and quantum well SOAs or alternatively other technologically advanced optical devices, such as quantum dot SOAs.