超顺磁性介孔纳米颗粒嫁接肟Pd环络合物对Heck反应的催化活性

采用溶胶-凝胶法制备出介孔二氧化硅包裹四氧化三铁纳米复合颗粒,在其表面修饰巯基,并以此为载体通过-SCH2-化学键嫁接长链的肟钯环络合物.利用透射电镜(TEM)、高分辨透射电镜(HRTEM)、傅里叶变换红外(FT-IR)光谱、N2吸附-脱附、X光电子能谱(XPS)、振动样品磁强计(VSM)等手段对催化剂进行表征,通过Heck反应对催化剂的活性进行评价.实验结果表明:所制备的磁性颗粒直径约为150nm,比表面积为287.0m2·g-1,且具有大小为3.5nm呈不规则的孔道结构,整个催化剂呈现超顺磁性.对于碘代苯与丙烯酸乙酯之间的Heck反应,2.5h后碘代苯的转化率可达到99%,催化剂在重复使用6次后能保持很高的催化活性(碘代苯转化率为95%).催化剂可稳定分散于反应体系中,并可在外磁场作用下快速与反应体系分离.     

Solvent-free coupling of aldehyde,alkyne, and amine over a versatile catalyst: Ag-functionalized mesoporous S,P-doped g-C3N4

In the present study, we introduce mesoporous g-C₃N₄/Ag co-doped with P and S which was designed and acquired by using mesoporous silica (SBA-15) as a hard templating agent and thiourea and chitosan phosphate as the dopants. The prepared catalyst was completely identified by FT-IR (Fourier-transform infrared spectroscopy), XRD (X-ray powder diffraction), FE-SEM (field-emission scanning electron microscopy), EDX (energy-dispersive spectroscopy), TEM (transmission electron microscopy), and Raman spectroscopy. The efficiency of the synthesized catalyst was evaluated toward the three-component coupling reaction, frequently named as A3 coupling. The higher activity of the prepared catalyst is because of the synergistic effects of phosphorus and sulfur co-doped together with Ag deposition. The desired products were achieved by an environmentally safe catalyst under the optimized conditions in high yields and short reaction time ranges.

     

Bi2O3/FAp,a sustainable catalyst for synthesis of dihydro-[1,2,4]triazolo[1,5-a]pyrimidine derivatives through green strategy

The bismuth loaded on fluorapatite (Bi₂O₃/FAp) proved to be an excellent catalyst for the synthesis of novel dihydro-[1,2,4]triazolo[1,5-a]pyrimidine derivatives via a three-component reaction involving the mixture of 1H-1,2,4-triazol-5-amine, ethyl cyanoacetate or ethyl acetoacetate, and different benzaldehydes in ethanol at room temperature. The catalyst material was characterized by X-ray diffraction, Brunauer–Emmett–Teller surface area analysis, Fourier-transform infrared, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy techniques. The efficacy of Bi₂O₃/FAp as a heterogeneous catalyst was evaluated with the loading of different wt% of bismuth on FAp. The 2.5% bismuth on FAp performed extremely well as a catalyst with a high yield of products (92%–96%) in a short reaction time (25–35 min). The catalyst was recovered by simple filtration. It showed undiminished activity up to five runs. Simple work-up, room temperature reaction, short reaction time, high yields, no column chromatography, and good reusability of catalyst are the merits of the proposed protocol. In addition, this process offers 100% carbon efficiency and 98% atom economy with noteworthy fiscal and environmental benefits.     

Fe3O4@SiO2 nanoparticles–functionalized Cu(II) Schiff base complex with an imidazolium moiety as an efficient and eco-friendly bifunctional magnetically recoverable catalyst for the Strecker synthesis in aqueous media at room temperature

Cu(II) Schiff base complex supported on Fe₃O₄@SiO₂ nanoparticles was employed as a magnetic nanocatalyst (nanocomposite) with a phase transfer functionality for the one-pot preparation of α-aminonitriles (Strecker reaction). The desired α-aminonitriles were obtained from the reaction of aromatic or aliphatic aldehydes, aniline or benzyl amine, NaCN, and 1.6 mol% of the catalyst in water at room temperature and good to excellent yields were obtained for all substrates. The catalyst was characterized analytically and instrumentally including Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric, nuclear magnetic resonance, energy-dispersive X-ray spectroscopy, inductively coupled plasma spectroscopy, vibrating-sample magnetometry analysis, dynamic light scattering, Brunauer–Emmett–Teller surface area, field emission scanning electron microscopy, and transmission electron microscopy analyses. The reaction mechanism was investigated, in which the performance of the catalyst as a phase transition factor seems to be probable. The catalyst showed high activity, high turnover frequency (TOF)s, significant selectivity, and fast performance toward the Strecker synthesis. The nanocatalyst can be readily and quickly separated from the reaction mixture with an external magnet and can be reused for at least seven successive reaction cycles without significant reduction in efficiency.     

Enhanced Electrocatalytic Activity of Methanol and Ethanol Oxidation in Alkaline Medium at Bimetallic Nanoparticles Electrochemically Decorated Fullerene-C60 Nanocomposite Electrocatalyst: An Efficient Anode Material for Alcohol Fuel Cell Applications

Direct alcohol fuel cells (DAFCs) have been recently playing a pivotal role in electrochemical energy sources and portable electronics. Research in DAFCs has proceeded to engage major attention due to their high catalytic activity, long-term stability, portability, and low cost. Herein, we present a facile surfactant-free route to anchor bimetallic Pd−W nanoparticles supported fullerene-C₆₀ catalyst (Pd-W@Fullerene-C₆₀) for high-performance electrooxidation of alcohols (methanol & ethanol) for DAFCs applications. Structural, elemental composition, and morphological analysis of the proposed catalyst were carried out using UV-Vis spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and energy-dispersive x-ray spectroscopy (EDX). Electrochemical properties such as electrochemical activity, electrochemical active surface area (ECSA), and long-term stability of the Pd-W@Fullerene-C₆₀ catalyst for ethanol and methanol oxidation in the alkaline medium were explored by using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and chronoamperometry (CA). Results revealed that the proposed catalyst showed enlarged ECSA, tremendous electrocatalytic activity, high poison tolerance limit, good reproducibility, and enhanced long-term stability as compared to the monometallic catalyst and commercially available catalyst (Pt/C) towards ethanol and methanol oxidation reaction. This enhanced potentiality of the Pd-W@Fullerene-C₆₀ catalyst is due to the synergistic effect of W−Pd nanoparticles and excellent electron kinetic from fullerene support material. These findings strongly suggest the Pd-W@Fullerene-C₆₀ catalyst as potential anode material for the alcohol oxidation reaction.     

Preparation of siloxene nanosheet‐supported palladium as sustainable catalyst for Mizoroki–Heck reaction

Siloxene nanosheets were successfully modified with palladium nanoparticles by reducing palladium chloride with hydrazine hydrate. The palladium nanoparticles–siloxene nanosheets as a catalyst for the Mizoroki–Heck reaction exhibited high activity, recoverability and stability. The structural morphology of the catalyst was investigated using transmission electron microscopy. High efficiency of the catalyst was proved in the Mizoroki–Heck reaction after five catalytic recycles. Copyright © 2014 John Wiley & Sons, Ltd.     

聚合物负载季鏻盐催化 CO2 与环氧化物的环加成反应

 制备了聚合物负载的季鏻盐催化剂, 并用于 CO₂ 与环氧氯丙烷环加成反应中. 采用红外光谱、热分析、原子吸收光谱和扫描电子显微镜等手段测定了催化剂的结构、热性能、磷元素含量和表面形貌等. 考察了 CO₂ 压力、温度、催化剂用量和反应时间等对环加成反应性能的影响. 结果表明, 在催化剂用量为 0.09 g, CO₂ 压力为 4.5 MPa, 于 150 ^oC 反应 6 h 时, 3-氯甲基环碳酸酯收率可达 97.7%, 选择性大于 99%. 且催化剂易分离回收, 重复使用 5 次后产物收率和选择性没有明显下降. 同时探讨了该催化剂上 CO₂ 环加成合成环碳酸酯的可能机理.     

Palladium–cadmium sulfide nanopowder at oil–water interface as an effective catalyst for Suzuki–Miyaura reactions

A simple and effective strategy is described for the synthesis of Pd–CdS nanopowder by the reduction of an organopalladium(II) complex, [PdCl₂(cod)] (cod = cis ,cis ‐1,5‐cyclooctadiene), in the presence of CdS quantum dots (QDs) at a toluene–water interface. We investigated the impact of addition of CdS QDs on catalytic activity of Pd nanoparticles (NPs). The Pd–CdS nanopowder functions as an efficient catalyst for Suzuki–Miyaura reactions for the formation of carbon–carbon bonds. There is a high electron density on Pd NPs and due to their high electron affinity they behave as an electron scavenger from CdS increasing the rate of oxidative addition, which is the rate‐determining step of the catalytic cycle, and, just as we expect, the C─C coupling reaction with the Pd–CdS nanopowder is faster and occurs in less time than that with Pd nanocatalysts. Compared to classical reactions, this method consistently has the advantages of short reaction times, high yields in a green solvent, reusability of the catalyst without considerable loss of catalytic activity and low cost, and is a facile method for the preparation of the catalyst.     

Preparation and characterization of copper/polysulfonamide complex immobilized on geraphene oxide as a novel catalyst for the synthesis of pyrimido[1,2-a]benzimidazoles

Copper–polysulfonamide complex immobilized on geraphene oxide as a novel heterogeneous catalyst (GO@PSA-Cu) was synthesized and the structure and morphology of catalyst were characterized with various analytical techniques such as Fourier-transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray, N₂ isotherms, elemental mapping, inductively coupled plasma–MS, and thermogravimetric analysis. The GO@PSA-Cu catalyst demonstrated good to excellent yields for the synthesis new derivatives of pyrimido[1,2-a]benzimidazoles via one-pot three-component condensation reaction of various aromatic aldehydes, 2-aminobenzimidazole, and ethyl acetoacetate in ethanol. The method presented herein has several prominent advantages such as cost-effectiveness, operational simplicity, short reaction times, high yields, and reusability of the catalyst even after six consecutive runs.     

Nanoparticles tungstophosphoric acid supported on polyamic acid: catalytic synthesis of 1,8-dioxo-decahydroacridines and bulky bis(1,8-dioxo-decahydroacridine)s

Tungstophosphoric acid nanoparticles supported on polyamic acid (TPA NPs/PAA) was prepared and employed as a catalyst for the facile selective synthesis of 1,8-dioxo-decahydroacridines and some bulky bis(1,8-dioxo-decahydroacridine)s via one-pot condensation of 5,5-dimethyl-1,3-cyclohexanedione and various aldehydes with aniline or ammonium acetate in ethanol–water solution. This catalyst was characterized by FT-IR, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), thermogravimetric analysis (TG), energy-dispersive X-ray analysis (EDAX), and inductively coupled plasma optical emission spectrometry (ICP-OES). The catalyst showed high thermal stability and good reusability. The products were isolated in high purity and the catalyst was easily separated in a simple workup and recycled several times without noticeable loss of activity under the described reaction conditions. The reaction is characterized by short reaction time, high efficiency, and mild reaction conditions.     

Synthesis of Nitrogen Incorporated Carbon Nanotubes with Different Diameters by Catalytic Pyrolysis of Butylamine

Bamboo-like nitrogen-doped carbon(CNx) nanotubes were synthesized by chemical vapor deposition (CVD) at a high reaction temperature of 600―900 °C. The butylamine and Fe/SBA-15 molecular sieve have been used as precursor and catalyst, respectively. Transmission electron microscopy(TEM) and high resolution transmission electron microscopy(HRTEM) observations show that the outer diameter and wall thickness as well as the inner diameter were increased with increasing reaction temperature in a temperature range of 600―800 °C. A synergism mechanism of the growth through bulk diffusion and the competitive growth through surface diffusion functions during the synthesis of CNx nanotubes was proposed.     

Cu nanoparticles immobilized on modified magnetic zeolite for the synthesis of 1,2,3‐triazoles under ultrasonic conditions

Magnetically recoverable copper nanoparticle‐loaded natural zeolite (CuNPs/MZN) as an efficient catalyst was synthesized. The Fe₃O₄ magnetic nanoparticles were immobilized into the pores of natural clinoptilolite zeolite, which were modified with epichlorohydrine and ethylenediamine species and then CuNPs were decorated on the surface of functionalized zeolite (CuNPs/MZN). The catalysts were successfully characterized by Fourier transform‐infrared, CHN, thermogravimetric analysis, inductively coupled plasma, X‐ray diffraction, scanning electron microscopy and transmission electron microscopy techniques. The 1,2,3‐triazoles were readily synthesized through using the catalyst in high yields and short reaction times under ultrasonic conditions via CuAAC reactions of aryl azides and terminal alkynes. The CuNPs/MZN was easily separated from the reaction mixture by an external magnet and reused several times successfully. The catalyst could be used for the synthesis of various organic compounds.     

镍(II)配合物官能化的MCM-41催化分子氧环氧化苯乙烯

制备了镍(II)席夫碱配合物官能化的MCM-41多相催化剂MCM-41-Ni.利用X射线粉末衍射、氮气物理吸附脱附、红外光谱、热重、电感耦合等离子体原子发射光谱、元素分析和透射电镜等方法对催化剂进行了表征.以氧气为氧化剂,MCM-41-Ni在催化环氧化苯乙烯的反应中表现出较高的催化活性;苯乙烯的转化率为95.2%,环氧苯乙烷的选择性为66.7%.系统地研究了反应温度、催化剂用量、溶剂以及反应时间对反应性能的影响.催化剂经过4次循环仍然表现出较好的稳定性和催化活性.     

N-Protection of amines using pyridinium 2, 2, 2-trifluoroacetate ionic liquid as an efficient and reusable catalyst

A simple, green, and efficient method for the N-tert-butoxycarbonylation of amines by pyridinium 2,2,2- trifluoroacetate （[Py][OTf]） as an efficient and reusable catalyst is reported. In general, electron donating groups on aryl group give rise to the higher yields than electron withdrawing groups. Clean reaction, short reaction times, high yields, reusability of catalyst, and easy preparation of it are some advantages of this work.     

聚(4-乙烯基吡啶丁烷磺酸)硫酸氢盐:一个高效的多相聚(离子液体)固体酸催化剂用于无溶剂条件下一锅法合成1-酰氨基-2-萘酚和取代喹啉(英文)

Poly(4-vinylpyridinium butane sulfonic acid) hydrogen sulfate has been used as an efficient dual acidic catalyst for the one-pot preparation of 1-amidoalkyl-2-naphthols and substituted quinolines under solvent-free conditions.The catalyst was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and thermo-gravimetric analysis. The results revealed several advantages to our new catalyst system,including its reusability,facile work-up procedure, eco-friendly reaction conditions,short reaction time,and high product yields.     

Cu2O/SiC高效催化卤代芳烃与酚类的Ullmann偶联反应

卤代苯与酚类化合物反应制取二芳基醚是现代有机合成中的一个重要反应.传统的二苯醚合成方法是铜催化卤代苯与酚类化合物的Ullmann型C-O偶联反应,但是这种方法需要苛刻的反应条件.后来,人们发现了Pd(0)和Cu(Ⅰ)基催化剂,但是前者成本较高,且需要使用昂贵的配体,因此其应用受到了限制,而铜作为一种成本较低的催化剂受到了越来越多的关注.铜催化剂可以分为均相和非均相两大类.均相铜催化剂使用的是铜盐,并且需要加入配体,成本较高,且不易分离和循环利用.非均相铜催化剂研究较多的是CuO,Cu2O及Cu纳米颗粒,其中Cu2O纳米颗粒催化剂对Ullmann型C-O偶联反应具有很高的催化活性,但是它在潮湿的空气中容易被氧化,因此需要寻找一种合适的载体防止Cu2O纳米颗粒被氧化.SiC具有优良的化学稳定性及导电导热性能,并且作为载体己经成功应用到很多热催化及光催化反应中.本文以高比表面积的SiC为载体,以二乙二醇作为溶剂和还原剂,采用传统的两步液相还原法制备了Cu2O/SiC催化剂,并通过X射线衍射、X射线光电子能谱、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和H2程序升温还原等方法对Cu2O/SiC催化剂进行了表征.SEM和TEM结果表明,Cu2O纳米颗粒均匀分散在SiC表面,同时上述表征结果都表明Cu在SiC上主要以Cu2O的形式存在.将制备的Cu2O/SiC催化剂用于催化卤代芳烃与酚类的Ullmann C-O偶联反应中.以碘苯和苯酚的Ullmann C-O偶联反应为模型实验,考察了反应温度、反应时间、溶剂、碱的种类及用量和催化剂用量等条件的影响,得到了碘苯与苯酚UllmannC-O偶联反应的最优反应条件为:卤代芳烃14 mmol,酚类14 mmol,1.0当量的Cs2CO3,Cu2O/SiC(5 wt％) 10 mg,四氢呋喃10mL,在Ar气氛下150℃反应3h.在该条件下,二苯醚收率达到97％,转化频率(TOF)高达1136 h-1.Cu2O/SiC催化剂对Ullmann C-O偶联反应具有很好的普适性,并且对Ullmann C-S偶联反应也表现出很高的活性,TOF高达1186h-1.以碘苯和苯酚的Ullmann C-O偶联反应为基准实验,对催化剂的循环稳定性进行了考察.Cu2O/SiC催化剂五次循环后二苯醚的收率从97％降低至64％,这主要是由于活性组分Cu2O的流失所致.     

Homogeneous hydrogenation of electron‐deficient alkenes by iridium complexes

The catalytic homogeneous hydrogenation of electron‐deficient alkenes (nucleophilic hydrogenation) was achieved in the presence of iridium complexes and a base as co‐catalyst. Contrary to hydrogenation of electron‐rich alkenes, which is inactivated by bases, the hydrogenation of the electron‐deficient alkenes turned out to be base activated. Here, we present a more thorough study on the capacities but also limitations of this new reaction mechanism using screenings of the reaction conditions as well as different Ir complexes and substrates. The formation of a catalytically active Ir complex is proposed. The active complex usually attacks a soft electron‐deficient atom, if more than one possibility exists (as shown by density functional theory computations). Additionally, first examples of enantiomeric enrichments in the presence of chiral Ir complexes are presented. The high catalyst load needed and the moderate yields show that the active complex is very unstable under conditions of nucleophilic hydrogenation and is quickly deactivated, which has to be addressed in further studies. Copyright © 2011 John Wiley & Sons, Ltd.     

FeNi Nanoparticles Coated on N-doped Ultrathin Graphene-like Nanosheets as Stable Bifunctional Catalyst for Zn-Air Batteries

High-performance and low-cost bifunctional catalysts are crucial to energy conversion and storage devices. Herein, a novel oxygen electrode catalyst with high oxygen evolution reaction and oxygen reduction reaction (OER/ORR) performance is reported based on bimetal FeNi nanoparticles anchored on N-doped graphene-like carbon (FeNi/N−C). The complete 2D ultrathin carbon nanosheet is induced by etching and stripping of molten sodium chloride and its ions in the carbonization process at suitable temperature. The obtained FeNi/N−C catalyst exhibits rapid reaction kinetics for OER, efficient four electron transfer for ORR, and outstanding bifunctional performance with reversible oxygen electrode index of 0.87 V for OER/ORR. Zn-air batteries with a high open-circuit voltage of 1.46 V and a stable discharge voltage of 1.23 V are assembled using liquid electrolytes, zinc sheet as Zn-electrode and FeNi/N−C coating on carbon cloth as air-electrode. The specific capacity is as high as 816 mAh g⁻¹ and there is extremely little decay after charge-discharge cycle time of 275 h for the FeNi/N−C as oxygen electrode catalyst in Zn-air battery, which are much better than that assembled with Pt/C−RuO₂ catalyst.     

Pd/SWNTs负载型催化剂的制备及其催化性能

利用单壁碳纳米管(SWNTs)自身的还原性, 将PdCl2溶液中的Pd2+直接还原成金属Pd负载在SWNTs表面上, 制备了具有良好催化性能的Pd/SWNTs负载型催化剂. 通过透射电镜(TEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)和热重分析(TG)对Pd/SWNTs 进行了表征, 并利用Suzuki反应对Pd/SWNTs的催化性能进行了测试. 实验结果表明, 用SWNTs与12 mmol·L-1的PdCl2的水溶液直接作用, 得到Pd/SWNTs催化材料的Pd负载量达到14.13%(w, 质量分数), 颗粒分散均匀, 粒径小(2 nm左右), 与SWNTs结合紧密; 用经过H2还原的Pd/SWNTs作催化剂, 在90 ℃下进行Suzuki反应, 30 min后反应就基本完成, 其联苯的产率达到98.10%, 催化活性较高, 可望广泛用于有机合成反应.     

High catalytic activity of a new Ag phosphorus ylide complex supported on montmorillonite: synthesis,characterization, and application for room temperature nitro reduction

In this work, the phosphorus ylide, [PPh₃CHC(O)CH₂Cl], was reacted with AgNO₃ to give the [Ag{C(H)PPh₃C(O)CH₂Cl}₂]⁺NO₃ ^? as the product. Then, it was supported on the modified montmorillonite nanoclay to prepare a new catalyst for the reduction reaction. The structure and morphology of the nanoclay catalyst were characterized by FT-IR, X-ray powder diffraction, scanning electron microscopy, energy-dispersive X-ray analysis and transmission electron microscopy techniques; also, the content of silver was obtained by inductively coupled plasma analyzer. This composition was exploited to study its catalytic activity in the reduction in aromatic nitro compounds; it displayed the high catalytic activity. Factors such as catalyst amount, solvent, temperature and reaction time were all systematically investigated to elucidate their effects on the yield of catalytic reduction in nitroarenes. This catalytic system exhibited high activity toward aromatic nitro compounds under mild conditions. The catalyst was reused five times without any significant loss in its catalytic activity.