A Chain Catalytic Reaction Involving Pd Cluster as Chain Carrier

   α−Alkyl- and α,α′-dialkyl-substituted benzylic alcohols PhCR′R′′OH (R′=H, Me, Et, Bu; R′′=H, Me) are transformed to the corresponding dilbenzylic ethers and water in acid-free neat substrate media shortly after the addition of the palladium(I) cluster [Pd₄(CO)₄(OAc)₄] (1). During the catalytic reaction occurring under anaerobic conditions, cluster 1 is gradually decomposed to form Pd black, whereas neither original cluster 1 nor Pd black is responsible for the observed reaction. The true reaction catalyst is generated from cluster 1 after a short induction period. On the basis of the reaction kinetics and the HREM, X-ray diffraction, DTA-TG, and elemental analysis data, the catalytic dehydration is suggested to occur through a nonradical chain mechanism involving an unstable intermediate Pd cluster as the chain carrier.

Interaction Between Pd(RaaiR′)Cl<Subscript>2</Subscript> and Adenine: Reaction Dynamics and Mechanism [RaaiR′ = 1-alkyl-2-(arylazo)imidazole]

Nucleophilic substitution of Pd(RaaiR′)Cl₂ [RaaiR′=1-alkyl-2-(arylazo)imidazole, p-R—C₆H₄— N=N—C₃H₂NN-1-R′; where R= H(a)/Me(b)/Cl(c) and R′ = Et(1)/Bz(2)] with adenine (A) in MeCN–water (1:1) at 298 K, to form [Pd(A)₂]Cl₂, has been studied spectrophotometrically under pseudo-first-order conditions and the analyses support a nucleophilic association path. The reaction follows the rate law, rate = {a+k [A] ₀²[Pd(RaaiR′)Cl₂]: first-order in Pd(RaaiR′)Cl₂ and second-order in A. The rate increases as follows: Pd(RaaiEt)Cl₂(1) < Pd(RaaiBz)Cl₂(2) and Pd(MeaaiR′)Cl₂(b) < Pd(HaaiR′)Cl₂(a) < Pd(ClaaiR′)Cl₂(c). External addition of Cl⁻ (LiCl) suppresses the rate (rate 1/[Cl⁻]). The activation parameters, H⁰ and S⁰ of the reactions were calculated from the Eyring plot and support the proposed mechanism.     

A novel method for the synthesis of (Z)-α-selenyl-α,β-unsaturated ketones via acylation of (E)-α-selanylvinylstannanes

The (E)-α-selenylvinylstannanes react with acyl halides in presence of a catalytic amount of Pd(PPh₃)₄ to give the corresponding (Z)-α-selenyl-α,β-unsaturated ketones in good yield.     

Approaches to wired terpyridine: Bithienyl alkynyl derivatives of 2,2′:6′,2″-terpyridine and their ruthenium(II) complexes

Two approaches to the formation of ruthenium(II) complexes containing ligands with conjugated 2,2′:6′,2″-terpyridine (tpy), alkynyl and bithienyl units have been investigated. Bromination of 4′-(2,2′-bithien-5′-yl)-2,2′:6′,2″-terpyridine leads to 4′-(5-bromo-2,2’-bithien-5′-yl)-2,2′:6′,2″-terpyridine (1), the single crystal structure of which has been determined. The complexes [Ru(1)₂][PF₆]₂ and [Ru(tpy)(1)][PF₆]₂ have been prepared and characterized. Sonogashira coupling of the bromo-substituent with (TIPS)CCH did not prove to be an efficient method of preparing the corresponding complexes with pendant alkynyl units. The reaction of 4′-ethynyl-2,2′:6’,2″-terpyridine with 5-bromo-2,2′-bithiophene under Sonogashira conditions yielded ligand 2, and the heteroleptic ruthenium(II) complex [Ru(2)(tpy)][PF₆]₂ has been prepared and characterized.     

Synthesis and reactivity of neodymium(III) amido-tethered N-heterocyclic carbene complexes

The reaction of the heteroleptic Nd(III) iodide, [Nd(L′)(N″)(μ-I)] with the potassium salts of primary aryl amides [KN(H)Ar′] or [KN(H)Ar^*] affords heteroleptic, structurally characterised, low-coordinate neodymium amides [Nd(L′)(N″)(N(H)Ar′)] and [Nd(L′)(N″)(N(H)Ar^*)] cleanly (L′ = t-BuNCH₂CH₂[C{NC(SiMe₃)CHNt-Bu}], N″ = N(SiMe₃)₂, Ar′ = 2,6-Dipp₂C₆H₃, Dipp = 2,6-Prⁱ₂C₆H₃, Ar^* = 2,6-(2,4,6-Prⁱ₃C₆H₂)₂C₆H₃). The potassium terphenyl primary amide [KN(H)Ar^*] is readily prepared and isolated, and structurally characterised. Treatment of these primary amide-containing compounds with alkali metal alkyl salts results in ligand exchange to give alkali metal primary amides and intractable heteroleptic Nd(III) alkyl compounds of the form [Nd(L′)(N″)(R)] (R = CH₂SiMe₃, Me). Attempted deprotonation of the Nd-bound primary amide in [Nd(L′)(N″)(N(H)Ar^*)] with the less nucleophilic phosphazene superbase Bu^tNP{NP(NMe₂)₃}₃ resulted in indiscriminate deprotonations of peripheral ligand CH groups.     

Theoretical investigation on possible mechanisms on regioselective formation of (η-siloxyallyl)tungsten complexes

Selective formation of (η³-siloxyallyl)tungsten complexes by reaction of hydrido(hydrosilylene)tungsten complexes with α,β-unsaturated carbonyl compounds was reported experimentally. The mechanisms have been investigated by employing the model reaction of [Cp(CO)₂(H)WSi(H)–{C(SiH₃)₃}] (R), derived from the original experimental complex Cp′(CO)₂(H)WSi(H)–[C(SiMe₃)₃] (1a, Cp′ = Cp*; 1b, Cp′ = η⁵-C₅Me₄Et), with methyl vinyl ketone, under the aid of the density functional calculations at the b3lyp level of theory. It is theoretically predicted that the route involving migration of the hydride to silicon to afford a 16e intermediate [Cp(CO)₂W–SiH₂–{C(SiH₃)₃}] is inaccessible (route 2), supporting the proposition by experiments. Another route, via [2 + 4] cycloaddition followed by directly Si–H reductive elimination, is theoretically predicted to be accessible (route 1). In route 1, two possible paths with different attacking directions of the oxygen of methyl vinyl ketone at Si (WSi) are put forward. The attack at the Si atom from the hydride (H1) side of the plane W–Si–H1 in R is found to be preferred kinetically. The regioselectivity for formation of (η³-siloxyallyl)tungsten complexes, where only the exo-anti isomer was obtained, is discussed based on the consideration of thermodynamics and kinetics.     

Reduction of α,β unsaturated carbonyl compounds by Ni–BH4

The reduction of α,β unsaturated carbonyl compounds by sodiumborohydride is catalysed by Ni(bpy)Cl₂ (bpy=2,2′-bipyridine). Various carbonyl compounds having the general formula R₁CH=CHCRO [where R₁, R=C₆H₅, H; p-MeO---C₆H₄---,C₆H₄; p-CH₃---C₆H₄, C₆H₅; (m-OMe---)(p-OMe---)C₆H₃, C₆H₅; C₆H₅, (CH₃)₂CH---; CH₃, H; m-Br---C₆H₄---, C₆H₅] are reduced to corresponding allylicalcohol [R₁CH=CHCRHOH] at 25°C within half an hour. During these reductions the double bond is partially reduced to give saturated alcohols as minor products having the molecular formula R₁CH₂CH₂CRHOH. The reduction of trans-3-phenyl-2-propenal with NaBH₄ and catalytic amounts of Ni(bpy)Cl₂ in solvents containing active deuterium (D₂O, CD₃OD), leads to the partial incorporation of deuterium at the α and γ positions to give C---D bonded alcohols.     

Application of α-chloroaldoxime O-methanesulfonates to one-pot synthesis of N,N′,N″-substituted guanidines via Tiemann rearrangement

A practical one-pot synthesis of N,N′,N″-trisubstituted guanidines via Tiemann rearrangement involving the reaction of α-chloroaldoxime O-methanesulfonates with alkyl amines is disclosed.     

Synthesis and Crystal Structure of [Co(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>](C<Subscript>19</Subscript>H<Subscript>17</Subscript>O<Subscript>4</Subscript>SO<Subscript>3</Subscript>)<Subscript>2</Subscript>⋅8H<Subscript>2</Subscript>O

The title compound, cobalt 4′,7-diethoxylisoflavone-3′-sulfonate([Co(H₂O)₆](X)₂⋅8H₂O, X = C₁₉H₁₇O₄SO₃) was synthesized and its structure was determined by single-crystal X-ray diffraction analysis. It crystallizes in the triclinic space group P-1 with cell parameters a = 9.026(3) Å, b = 16.431(5) Å, c = 18.195(6) Å, α = 72.289(4)^∘, β = 87.498(4)^∘, γ = 82.775(5)^∘, V = 2550.1(13) Å⁻³, D_c = 1.419 Mg m⁻³, and Z = 2. The results show that the title compound consists of one cobalt cation, six coordinated water molecules, eight lattice water molecules, and two 4′,7-diethoxylisoflavone-3′-sulfonate anions, C₁₉H₁₇O₄SO⁻₃. Two anions have different conformations. Twelve H atoms of six coordinated water molecules, as donors, form hydrogen bonds with four oxygen atoms of sulfo-groups of two anions and eight oxygen atoms of eight lattice water molecules. In addition, π < eqid1 > ⋅ < eqid2 > π stacking interactions exist in the crystal structure, which together with hydrogen bonds lead to supramolecular formation with a three-dimensional network.     

Stereoselective total synthesis of (+)-(6R,2′S)-cryptocaryalactone and (−)-(6S,2′S)-epi cryptocaryalactone

The total synthesis of (+)-(6R,2′S)-cryptocaryalactone and (−)-(6S,2′S)-epi cryptocaryalactone is reported based on stereoselective reduction of δ-hydroxy β-keto ester to install 1,3-polyol system, cis Wittig olefination, and lactonization as the key steps. The synthesis of (−)-(6S,2′S)-epi cryptocaryalactone is also reported using syn-benzylidene acetal formation and a preferential Z-Wittig olefination reaction and lactonization as the key steps.     

New approaches to synthesis of tris[1,2,4]triazolo[1,3,5]triazines

Thermal cyclization of 3-R-5-chloro-1,2,4-triazoles (R = Cl, Ph) afforded 2,6,10-tri-R- tris[1,2,4]triazolo[1,5-a:1′,5′c:1″,5″-e][1,3,5]triazines 5 (R = Ph) and 7 (R = Cl). These compounds are first representatives of this class of heterocycles, whose structures were unambiguously established. Treatment of these compounds with nucleophiles (H₂O/NaOH, NH₃) results in the triazine ring opening to give compounds consisting of three 1,2,4-triazole rings linked in a chain. For example, treatment of cyclic compound 5 with aqueous alkali affords 3-phenyl-1-3-phenyl-1-(3-phenyl-1H-1,2,4-triazol-5-yl)-1,2,4-triazol-5-yl-1H-1,2,4-triazol-5-one. Treatment of 3,7,11-triphenyltris[1,2,4]triazolo[4,3-a:4′,3′c:4″,3″-e][1,3,5]triazine (2) with HCl/SbCl₅ leads to the triazine ring opening giving rise to 5-(3-chloro-5-phenyl-1,2,4-triazol-4-yl)-3-phenyl-4-(5-phenyl-1H-1,2,4-triazol-3-yl)-1,2,4-triazole. Thermal cyclization of the latter produces 3,7,10-triphenyltris[1,2,4]triazolo[1,5-a:4′,3′c:4″,3″-e][1,3,5]triazine (13). Thermolysis of both cyclic compound 2 and cyclic compound 13 is accompanied by the Dimroth rearrangement to yield 3,6,10-triphenyl-tris[1,2,4]triazolo[1,5-a:1′, 5′-c:4″,3″-e][1,3,5]triazine (14). Compounds 13 and 14 are the first representatives of cyclic compounds with this skeleton. ¹³C NMR spectroscopy allows the determination of the isomer type in a series of tris[1,2,4]triazolo[1,3,5]triazines.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 706–712, March, 2005.     

Polymerisations of -caprolactone and β-butyrolactone with Zn-, Al- and Mg-based organometallic complexes

The reaction of EtAlCl₂ with 1,2-{LiN(PMes₂)}₂C₆H₄ (Mes = 2,4,6-Me₃C₆H₂) and of butyloctylmagnesium with 1,2-{NH(PPh₂)}₂C₆H₄ gave [AlEt(1,2-{N(PMes₂)}₂C₆H₄-κ²N,N′)(THF)] (1) and [Mg(1,2-{N(PPh₂)}₂C₆H₄-κ²N,N′)(THF)₂] (2), respectively. Complexes 1 and 2 were fully characterised by NMR (¹H, ¹³C, ³¹P) and IR spectroscopy and mass spectrometry. Complexes 1 and 2 were employed as catalysts in the polymerisation of -caprolactone, which produced polymers with a narrow molecular weight distribution. For comparison the polymerisations of -caprolactone and β-butyrolactone were carried out with the Zn complex [ZnPr{1-N(PMes₂)-2-N(PHMes₂)C₆H₄-κ²N,N′}] (3) as catalyst, which produced polymers with narrow molecular weight distributions and high molecular weights.     

Structure of the CuCl2 adduct of trans-chloro-1,4-bis(p-methoxyphenyl)-1,4-diaza-3-methylbutadien-2-yl-bis(triphenylphosphine) -palladium(II)

An X-ray structure analysis of binuclear complex [CuCl₂{RN---C(Me)C(R′)---NR}] (R = p-C₆H₄OMe; R′ = trans-PdCl(PPh₃)₂) has shown that the Pd---C σ-bonded 1,4-diaza-3-methylbutadien-2-yl-group acts as σ,σ-N,N chelating ligand witha tetragonally distorted tetrahedral geometry around the copper atom. No exchange of ancillary ligands has occured between the two metallic centers of the molecule, which are 4.75 » apart from each other.     

Transformations of allylamine and N-allylacetamide on triosmium cluster complexes with hemilabile ligands

The cluster complexes (μ-H)Os₃(μ-OCR)(СО)₁₀ (R = Me (1); R = Ph (2)) catalyze the allylic rearrangement of N-allylacetamide at room temperature. Microwave irradiation greatly (by more than several thousand-fold) accelerates the reaction between the solution of 2 and allylacetamide. The interaction of cluster 2 with allylamine both at room and elevated temperatures results in cleavage of the C–N bond and coordination of the allylic fragment to one of the osmium atoms with the formation of Os₃(CO)₉(μ,η²-OC-Ph)(η³-C₃H₅) (4) cluster.     

Synthesis and Crystal Structure of β-Amino-α-Phenyl-α-Ferrocenylethanol

β-Amino-α-phenyl-α-ferrocenylethanol, FcC(OH)(Ph)CH₂NH₂ was prepared by the reduction of cyanohydrin trimethylsilyl ether of benzoylferrocene with lithium aluminum hydride. This new compound was characterized by elemental analysis, IR and ¹H NMR spectroscopy. The structure was also confirmed by a single crystal X-ray study. The compound crystallizes in monoclinic P2₁/c space group with unit cell dimensions: a = 12.5906(17), b = 5.9636(8), c = 19.8320(3) Å, β = 102.047(2)^∘, V = 1456.3(3) ų, Z = 4. The structure exhibits intra- and inter-molecular hydrogen bonding of the type N—H⋅ < eqid1 > ⋅O and O—H⋅ < eqid2 > ⋅N, respectively. The pattern of the inter-molecular hydrogen bonding interaction contains a 10-atom ring with two donors and two acceptors, showing a dimeric crystal packing.     

Adapting (4,4) Networks through Substituent Effects and Conformationally Flexible 3,2’:6’,3”-Terpyridines

Coordination networks formed between Co(NCS)₂ and 4’-substituted-[1,1’-biphenyl]-4-yl-3,2’:6’,3”-terpyridines in which the 4’-group is Me (1), H (2), F (3), Cl (4) or Br (5) are reported. [Co(1)₂(NCS)₂]_n·4.5nCHCl₃, [Co(2)₂(NCS)₂]_n·4.3nCHCl₃, [Co(3)₂(NCS)₂]_n·4nCHCl₃, [Co(4)₂(NCS)₂]_n, and [Co(5)₂(NCS)₂]_n·nCHCl₃ are 2D-networks directed by 4-connecting cobalt nodes. Changes in the conformation of the 3,2’:6’,3”-tpy unit coupled with the different peripheral substituents lead to three structure types. In [Co(1)₂(NCS)₂]_n·4.5nCHCl₃, [Co(2)₂(NCS)₂]_n·4.3nCHCl₃, [Co(3)₂(NCS)₂]_n·4nCHCl₃, cone-like arrangements of [1,1’-biphenyl]-4-yl units pack through pyridine…arene π-stacking, whereas Cl…π interactions are dominant in the packing in [Co(4)₂(NCS)₂]_n. The introduction of the Br substituent in ligand 5 switches off both face-to-face π-stacking and halogen…π-interactions, and the packing interactions are more subtly controlled. Assemblies with organic linkers 1–3 are structurally similar and the lattice accommodates CHCl₃ molecules in distinct cavities; thermogravimetric analysis confirmed that half the solvent in [Co(3)₂(NCS)₂]_n·4nCHCl₃ can be reversibly removed.     

Temperature dependence vapour pressure measurements of Mg(tmhd)2(tmeda) [(tmhd = 2,2,6,6-tetramethyl-3,5-heptanedione, tmeda = N,N,N′,N′-tetramethylethylenediamine]

The reaction between the magnesium β-diketonate complex Mg(tmhd)₂(H₂O)₂ and 1 equiv. of N,N,N′,N′-tetramethylethylenediamine (tmeda = Me₂NCH₂CH₂NMe₂) in hexane at room temperature yielded Mg(tmhd)₂(tmeda). The standard enthalpy of sublimation (83.2 ± 2.3 kJ mol⁻¹) and entropy of sublimation (263 ± 6.3 J mol⁻¹ K⁻¹) of Mg(tmhd)₂(tmeda) were obtained from the temperature dependence vapour pressure, determined by adopting a horizontal dual arm single furnace thermogravimetric analyser as a transpiration apparatus. From the observed melting point depression DTA, the standard enthalpy of fusion (58.3 ± 5.2 kJ mol⁻¹) was evaluated, using the ideal eutectic behaviour of Mg(tmhd)₂(tmeda) as a solvent with bis(2,4-pentanedionato)magnesium(II), Mg(acac)₂ as a non-volatile solute.     

Palladium acetate complexes bearing chelating N-heterocyclic carbene (NHC) ligands: Synthesis and catalytic oxidative homocoupling of terminal alkynes

The imidazolium salts 1,1′-dibenzyl-3,3′-propylenediimidazolium dichloride and 1,1′-bis(1-naphthalenemethyl)-3,3′-propylenediimidazolium dichloride have been synthesized and transformed into the corresponding bis(NHC) ligands 1,1′-dibenzyl-3,3′-propylenediimidazol-2-ylidene (L₁) and 1,1′-bis(1-naphthalenemethyl)-3,3′-propylenediimidazol-2-ylidene (L₂) that have been employed to stabilize the Pd^II complexes PdCl₂(κ²-C,C-L₁) (2a) and PdCl₂(κ²-C,C-L₂) (2b). Both latter complexes together with their known homologous counterparts PdCl₂(κ²-C,C-L₃) (1a) (L₃ = 1,1′-dibenzyl-3,3′-ethylenediimidazol-2-ylidene) and PdCl₂(κ²-C,C-L₄) (1b) (L₄ = 1,1′-bis(1-naphthalenemethyl)-3,3′-ethylenediimidazol-2-ylidene) have been straightforwardly converted into the corresponding palladium acetate compounds Pd(κ¹-O-OAc)₂(κ²-C,C-L₃) (3a) (OAc = acetate), Pd(κ¹-O-OAc)₂(κ²-C,C-L₄) (3b), Pd(κ¹-O-OAc)₂(κ²-C,C-L₁) (4a), and Pd(κ¹-O-OAc)₂(κ²-C,C-L₂) (4b). In addition, the phosphanyl-NHC-modified palladium acetate complex Pd(κ¹-O-OAc)₂ (κ²-P,C-L₅) (6) (L₅ = 1-((2-diphenylphosphanyl)methylphenyl)-3-methyl-imidazol-2-ylidene) has been synthesized from corresponding palladium iodide complex PdI₂(κ²-P,C-L₅) (5). The reaction of the former complex with p-toluenesulfonic acid (p-TsOH) gave the corresponding bis-tosylate complex Pd(OTs)₂(κ²-P,C-L₅) (7). All new complexes have been characterized by multinuclear NMR spectroscopy and elemental analyses. In addition the solid-state structures of 1b·DMF, 2b·2DMF, 3a, 3b·DMF, 4a, 4b, and 6·CHCl₃·2H₂O have been determined by single crystal X-ray structure analyses. The palladium acetate complexes 3a/b, 4a/b, and 6 have been employed to catalyze the oxidative homocoupling reaction of terminal alkynes in acetonitrile chemoselectively yielding the corresponding 1,4-di-substituted 1,3-diyne in the presence of p-benzoquinone (BQ). The highest catalytic activity in the presence of BQ has been obtained with 6, while within the series of palladium-bis(NHC) complexes, 4b, featured with a n-propylene-bridge and the bulky N-1-naphthalenemethyl substituents, revealed as the most active compound. Hence, this latter precursor has been employed for analogous coupling reaction carried out in the presence of air pressure instead of BQ, yielding lower substrate conversion when compared to reaction performed in the presence of BQ. The important role of the ancillary ligand acetate in the course of the catalytic coupling reaction has been proved by variable-temperature NMR studies carried out with 6 and 7′ under catalytic reaction conditions.     

Tetramethylammonium hydroxide (TMAH) thermochemolysis of 2-arylcoumaran lignin model compounds

Phenolic 2-arylcoumarans 1–6 were used to examine the behaviors of β-5 subunits in lignin during tetramethylammonium hydroxide (TMAH) thermochemolysis. Products were monitored by gas chromatography/mass spectrometry. The process predominantly provided dimeric products with the opened hydrofuran ring. Substituent changes at the γ-position of ring A and at the 5-position of ring B had a large effect on the product compositions. 2-Arylcoumarans 1 and 6 with the γ-CH₂OH substituent predominantly gave 2,3,3′,4′-tetramethoxystilbenes involving the elimination of the γ-CH₂OH substituent, while 2–5 with the γ-CH₃ substituent gave a mixture of 2,3,3′,4′-tetramethoxy-α-methylstilbenes and α-methoxy-α-(3′,4′-dimethoxyphenyl)-β-(2,3-dimethoxyphenyl)propanes. Substituent –CHCHCH₃ on ring B remained unaffected. Substituents –CHCHCH₂OH and –COOH on ring B produced the corresponding methyl ether and ester, respectively, by methylation. The –CHCHCHO substituent on ring B was converted to the –CHO substituent.     

Reactions of nickelocene with lithium and magnesium alkyls containing β-hydrogen atoms

The reaction of nickelocene with BrMgR, where R=CH₂CH(CH₃)C₆H₅, C₂H₅, (CH₂)₇CH₃ and CH₂CH₂CH₃, have been studied. It was found that the presence of β-hydrogen in R did not cause the total splitting of the carbon–nickel bond but alkylidynetrinickel clusters were formed. It is the first example of the synthesis of alkylidynetrinickel clusters (NiCp)₃CR′ from the organonickel species possessing β-hydrogen. Besides trinickel clusters, the following compounds were always formed in all the studied reactions: (NiCp)₄H₂, (NiCp)₆, CpNi(η³-C₅H₇) and (NiCp)₂(μ-C₅H₆). The structure of (NiCp)₃CCH(CH₃)Ph has been determined by a single-crystal X-ray diffraction study.