Spin-polarized electron tunneling in bcc FeCo/MgO/FeCo(001) magnetic tunnel junctions

In combining spin- and symmetry-resolved photoemission, magnetotransport measurements and ab initio calculations we detangled the electronic states involved in the electronic transport in Fe(1-x)Co(x)(001)/MgO/Fe(1-x)Co(x)(001) magnetic tunnel junctions. Contrary to previous theoretical predictions, we observe a large reduction in TMR (from 530 to 200% at 20 K) for Co content above 25 atomic% as well as anomalies in the conductance curves. We demonstrate that these unexpected behaviors originate from a minority spin state with Δ(1) symmetry that exists below the Fermi level for high Co concentration. Using angle-resolved photoemission, this state is shown to be a two-dimensional state that occurs at both Fe(1-x)Co(x)(001) free surface, and more importantly at the interface with MgO. The combination of this interface state with the peculiar density of empty states due to chemical disorder allows us to describe in details the complex conduction behavior in this system.     

Oxygen-induced symmetrization and structural coherency in Fe/MgO/Fe(001) magnetic tunnel junctions

We present x-ray diffraction experiments and multiple-scattering calculations on the structure and transport properties of a Fe/MgO/Fe(001) magnetic tunnel junction (MTJ). Coherent growth of the top Fe electrode on the MgO spacer is observed only for Fe deposition in ambient oxygen atmosphere leading to a coherent and symmetric MTJ structure characterized by FeO layers at both interfaces. This goes in parallel with calculations indicating large positive tunnel magnetoresistance (TMR) values in such symmetric junctions. The results have important implications for achieving giant TMR values.     

Evidence of a symmetry-dependent metallic barrier in fully epitaxial MgO based magnetic tunnel junctions

We report on the experimental observation of tunneling across an ultrathin metallic Cr spacer layer that is inserted at the interface of a Fe/MgO/Fe(001) junction. We show how this remarkable behavior in a solid-state device reflects a quenching in the transmission of particular electronic states, as expected from the symmetry-filtering properties of the MgO barrier and the band structure of the bcc Cr(001) spacer in the epitaxial junction stack. This ultrathin Cr metallic barrier can promote quantum well states in an adjacent Fe layer.     

Low frequency noise in asymmetric double barrier magnetic tunnel junctions with a top thin MgO layer

Low frequency noise has been investigated at room temperature for asymmetric double barrier magnetic tunnel junctions(DBMTJs), where the coupling between the top and middle Co Fe B layers is antiferromagnetic with a 0.8-nm thin top Mg O barrier of the Co Fe B/Mg O/Co Fe/Co Fe B/Mg O/Co Fe B DBMTJ. At enough large bias, 1/f noise dominates the voltage noise power spectra in the low frequency region, and is conventionally characterized by the Hooge parameter αmag.With increasing external field, the top and bottom ferromagnetic layers are aligned by the field, and then the middle free layer rotates from antiparallel state(antiferromagnetic coupling between top and middle ferromagnetic layers) to parallel state. In this rotation process αmag and magnetoresistance-sensitivity-product show a linear dependence, consistent with the fluctuation dissipation relation. With the magnetic field applied at different angles(θ) to the easy axis of the free layer,the linear dependence persists while the intercept of the linear fit satisfies a cos(θ) dependence, similar to that for the magnetoresistance, suggesting intrinsic relation between magnetic losses and magnetoresistance.     

Electrical conductance properties for magnetic tunnel junctions with MgO barriers

We measured inelastic electron tunneling (IET) spectra and conductance for MgO tunneling magnetoresistance (TMR) films to obtain information on the ferromagnetic/barrier layer interface. The IET spectra showed the difference between amorphous and crystalline structures in the barrier. In the magnetic tunnel junction (MTJ) with a crystalline barrier the IET spectra indicated an Mg-O phonon peak at a low bias voltage by measurement with a parallel magnetization configuration. On the other hand, no peak was observed in the MTJ with an amorphous barrier.     

Current induced resistance change of magnetic tunnel junctions with ultra-thin MgO tunnel barriers

Ultra-thin magnetic tunnel junctions with low resistive MgO tunnel barriers are prepared to examine their stability under large current stress. The devices show magnetoresistance ratios of up to 110% and an area resistance product of down to . If a large current is applied, a reversible resistance change is observed, which can be attributed to two different processes during stressing and one relaxation process afterwards. Here, we analyze the time dependence of the resistance and use a simple model to explain the observed behavior. The explanation is further supported by numerical fits to the data in order to quantify the timescales of the involved phenomena.     

Carbon nanotube based magnetic tunnel junctions

Spin-coherent quantum transport in carbon nanotube magnetic tunnel junctions is investigated theoretically. A spin-valve effect is found for metallic, armchair tubes, with a magnetoconductance ratio ranging up to 20%. Because of the finite length of the nanotube junctions, transport is dominated by resonant transmission. The magnetic tunnel junctions are found to have distinctly different transport behavior depending on whether or not the length of the tubes is commensurate with a 3N+1 rule, with N the number of basic carbon repeat units along the nanotube length.     

Co基磁性隧道结势垒结构的电子全息研究

利用高分辨电子显微术和电子全息方法研究了Co基磁性隧道结退火热处理前后的微观结构及相应势垒层结构的变化. 研究结果表明，退火处理可以明显地改善势垒层和顶电极、底电极之间的界面质量，改进势垒层本身的结构. 这与该磁性隧道结经过280℃退火处理后，隧道磁电阻值大大增加是一致的. 关键词： 磁性隧道结 隧道磁电阻 高分辨电子显微学 电子全息     

Tunnel magnetoresistance in alumina, magnesia and composite tunnel barrier magnetic tunnel junctions

Using magnetron sputtering, we have prepared Co-Fe-B/tunnel barrier/Co-Fe-B magnetic tunnel junctions with tunnel barriers consisting of alumina, magnesia, and magnesia-alumina bilayer systems. The highest tunnel magnetoresistance ratios we found were 73% for alumina and 323% for magnesia-based tunnel junctions. Additionally, tunnel junctions with a unified layer stack were prepared for the three different barriers. In these systems, the tunnel magnetoresistance ratios at optimum annealing temperatures were found to be 65% for alumina, 173% for magnesia, and 78% for the composite tunnel barriers. The similar tunnel magnetoresistance ratios of the tunnel junctions containing alumina provide evidence that coherent tunneling is suppressed by the alumina layer in the composite tunnel barrier.     

Oxygen-vacancy-induced diffusive scattering in Fe/MgO/Fe magnetic tunnel junctions

By first principles analysis, we systematically investigate effects of oxygen vacancies (OV) in the MgO barrier of Fe/MgO/Fe magnetic tunnel junctions. The interchannel diffusive scattering by disordered OVs located at or near the Fe/MgO interface drastically reduces the tunnel magnetoresistance ratio (TMR) from the ideal theoretical limit to the presently observed much smaller experimental range. Interior OVs are far less important in influencing TMR, but they significantly increase the junction resistance. Filling OV with nitrogen atoms restores TMR to near the ideal theoretical limit.     

Spin torque, tunnel-current spin polarization, and magnetoresistance in MgO magnetic tunnel junctions

We employ the spin-torque response of magnetic tunnel junctions with ultrathin MgO tunnel barrier layers to investigate the relationship between spin transfer and tunnel magnetoresistance (TMR) under finite bias, and find that the spin torque per unit current exerted on the free layer decreases by < 10% over a bias range where the TMR decreases by > 40%. This is inconsistent with free-electron-like spin-polarized tunneling and reduced-surface-magnetism models of the TMR bias dependence, but is consistent with magnetic-state-dependent decay lengths in the tunnel barrier.     

双势垒磁性隧道结中量子阱共振隧穿效应的第一性原理理论

磁性隧道结材料中自旋相关的量子阱态所导致的共振隧穿现象具有很重要的研究和应用价值，文章介绍了最近在Fe（001）／MgO／Fe／MgO／Fe双势垒磁性隧道结中存在的量子阱共振隧穿效应的理论研究工作，通过量子阱态的第一性原理的计算以及结合对中间Fe薄膜孤岛结构所导致Coulomb阻塞效应的分析，证实了最近Nozaki等人（Nozaki T et al．Phys．Rev．Lett．，2006，96：027208）实验中得到的振荡效应确实来源于中间Fe层多数自旋电子在Г点处形成的△1对称性的量子阱态．Coulomb阻塞效应的存在正是导致实验中低温下量子阱共振隧穿效应不够明显的主要原因．     

First-principles theory of quantum well resonance in double barrier magnetic tunnel junctions

Quantum well (QW) resonances in Fe(001)/MgO/Fe/MgO/Fe double barrier magnetic tunnel junctions are calculated from first principles. By including the Coulomb blockade energy due to the finite size islands of the middle Fe film, we confirm that the oscillatory differential resistance observed in a recent experiment [T. Nozaki, Phys. Rev. Lett. 96, 027208 (2006)10.1103/PhysRevLett.96.027208] originates from the QW resonances from the Delta1 band of the Fe majority-spin channel. The primary source of smearing at low temperatures is shown to be the variation of the Coulomb blockade energy.     

双势垒磁性隧道结中量子阱共振隧穿效应的第一性原理理论

磁性隧道结材料中自旋相关的量子阱态所导致的共振隧穿现象具有很重要的研究和应用价值.文章介绍了最近在Fe(001)/MgO/Fe/MgO/Fe双势垒磁性隧道结中存在的量子阱共振隧穿效应的理论研究工作.通过量子阱态的第一性原理的计算以及结合对中间Fe薄膜孤岛结构所导致Coulomb阻塞效应的分析,证实了最近Nozaki等人(Nozaki T et al. Phys. Rev. Lett., 2006,96:027208 )实验中得到的振荡效应确实来源于中间Fe层多数自旋电子在Γ点处形成的Δ1对称性的量子阱态.     

Stability of magnetic tunnel junctions

When magnetic tunnel junctions (MTJ) are built into a memory device they will be arranged in a matrix; therefore some of the not addressed elements will be exposed to a significant field during the switching of one element. It has to be avoided that the state of not selected MTJ is changed during this process. Here we present data on the stability of MTJ against small fields which occur during a writing process.     

Output voltage calculations in double barrier magnetic tunnel junctions with asymmetric voltage behavior

In this paper we study the asymmetric voltage behavior (AVB) of the tunnel magnetoresistance (TMR) for single and double barrier magnetic tunnel junctions (MTJs) in range of a quasi-classical free electron model. Numerical calculations of the TMR–V curves, output voltages and I–V characteristics for negative and positive values of applied voltages were carried out using MTJs with CoFeB/MgO interfaces as an example. Asymmetry of the experimental TMR–V curves is explained by different values of the minority and majority Fermi wave vectors for the left and right sides of the tunnel barrier, which arises due to different annealing regimes. Electron tunneling in DMTJs was simulated in two ways: (i) Coherent tunneling, where the DMTJ is modeled as one tunnel system and (ii) consecutive tunneling, where the DMTJ is modeled by two single barrier junctions connected in series.     

NiO-thickness dependent magnetic anisotropies in Fe/NiO/Au(001) and Fe/NiO/MgO(001) systems

The in-plane magnetic anisotropy of Fe/NiO bilayers was studied quantitatively as a function of NiO thickness using the magneto-optical Kerr effect with a rotating field. For NiO thicker than the ordering transition thickness, the total in-plane fourfold anisotropy of the Fe layer decreases with NiO thickness in Fe/NiO/Au(001), but increases in Fe/NiO/MgO(001). Our result indicates that the exchange coupling in an Fe/NiO bilayer might induce an additional in-plane fourfold anisotropy, and the opposite thickness dependent behaviors may be attributed to the different Ni²⁺ antiferromagnetic spin orientations for NiO films grown on Au(001) and MgO(001) surfaces.     

Transformation behaviors,structural and magnetic characteristics of Ni-Mn-Ga films on MgO （001）

Ferromagnetic Ni-Mn-Ga films were fabricated by depositing on MgO （001） substrates at temperatures from 673 K to 923 K. Microstructure, crystal structure, martensitic transformation behavior, and magnetic properties of the films were studied. With increasing deposition temperature, the surface morphology of the films transforms from granular to continu- ous. The martensitic transformation temperature is not dependent on deposition temperature; while transformation behavior is affected substantially by deposition temperature. X-ray analysis reveals that the film deposited at 873 K has a 7M marten- site phase, and its magnetization curve provides a typical step-increase, indicating the occurrence of magnetically induced reorientation （MIR）. In situ magnetic domain structure observation on the film deposited at 873 K reflects that the marten- sitic transformation could be divided into two periods： nucleation and growth, in the form of stripe domains. The MIR occurs at the temperature at which martensitic transformation starts, and the switching field increases with the decrease of temperature due to damped thermal activation. The magnetically induced martensitic transformation is related to the difference of magnetization between martensite and austenite. A shift of martensite temperature of dT/dH = 0.43 K/T is observed, consistent with the theoretical value, 0.41 K/T.     

Spin-flip assisted tunneling through quantum dot based magnetic tunnel junctions

We theoretically study the spin-polarized transport through double barrier magnetic tunnel junction (DBMTJ) consisting of the quantum dot sandwiched by two ferromagnetic (FM) leads. The tunneling current through the DBMTJ is evaluated based on the Keldysh nonequilibrium Green’s function approach. The self-energy and Green’s function of the dot are analytically obtained via the equation of motion method, by systematically incorporating two spin-flip phenomena, namely, intra-dot spin-flip, and spin-flip coupling between the lead and the central dot region. The effects of both spin-flip processes on the spectral functions, tunneling current and tunnel magnetoresistance (TMR) are analyzed. The spin-flip effects result in spin mixing, thus contributing to the spectral function of the off-diagonal Green’s function components ( G_s[`(s)] ^r )\left( {G_{\sigma \bar \sigma }^r } \right). Interestingly, the spin-flip coupling between the lead and dot enhances both the tunneling current and the TMR for applied bias above the threshold voltage V _th . On the other hand, the intra-dot spin-flip results in an additional step in the I-V characteristics near V _th . Additionally, it suppresses the tunneling current but enhances the TMR. The opposing effects of the two types of spin-flip on the tunneling current means that one spin-flip mechanism can be engineered to counteract the other, so as to maintain the tunneling current without reducing the TMR. Their additive effect on the TMR enables the DBMTJ to attain a large tunneling current and high TMR for above threshold bias values.     

Bias voltage dependence of tunneling anisotropic magnetoresistance in magnetic tunnel junctions with MgO and Al2O3 tunnel barriers

Tunneling anisotropic magnetoresistance (TAMR) is observed in tunnel junctions with transition metal electrodes as the moments are rotated from in-plane to out-of-plane in sufficiently large magnetic fields that the moments are nearly parallel to one another. A complex angular dependence of the tunneling resistance is found with twofold and fourfold components that vary strongly with bias voltage. Distinctly different TAMR behaviors are obtained for devices formed with highly textured crystalline MgO(001) and amorphous Al2O3 tunnel barriers. A tight-binding model shows that a fourfold angular dependence can be explained by the presence of an interface resonant state that affects the transmission of the contributing tunneling states through a spin-orbit interaction.