通过保留相位进行全息图信息压缩的方法

从全息图的特点出发,研究了全息图的记录和再现原理,提出了一种对离轴菲涅耳全息图信息压缩的方法。对全息图进行傅里叶变换,滤除零级噪声及物光波的共轭波前,仅仅保留物光波的相位信息,而后以采用较低的采样频率对全息图重新抽样,从而大大减少了数字全息图的信息冗余。压缩后的全息图也可以获得良好像质的再现像。理论和实验均证明了该方法的可行性,为全息图的信息存贮与传输提供一条新的途径。     

Fast Computation of Fresnel Holograms Employing Difference

We propose an approximation method that can calculate the Fresnel hologram 16 times faster than the conventional method. To compute the hologram, an object is assumed to be a collection of self-illuminated points and the fringes from each object point are superposed. The distance between object point and sampling point on the hologram is used to obtain the phase of the light. Since a sampled hologram usually has small pixel intervals, the difference of the distance values between adjacent pixels is also small and its n-th order difference can be assumed to be constant. Therefore, the distance value at a certain pixel can be obtained from its neighbor with simple additions. The distance error can be reduced less that one wavelength with practical parameters. A hologram, which has a horizontal parallax only, 1.3 Mega-pixels and 1,000 object points, can be calculated in less than one second with a personal computer.     

Three-dimensional displays using computer-generated holograms

A hologram of a three-dimensional object is synthesized by a computer using the technique of holographic stereograms. A sequence of perspective views of an object is calculated and their Fourier transform holograms are synthesized by a computer. Each hologram is arranged in the order of the view points to produce the final composite hologram. The experimental reconstruction of the three-dimensional object can be successfully performed.     

Numerical reconstruction of an object image using an X‐ray dynamical diffraction Fraunhofer hologram

A numerical method of reconstruction of an object image using an X‐ray dynamical diffraction Fraunhofer hologram is presented. Analytical approximation methods and numerical methods of iteration are discussed. An example of a reconstruction of an image of a cylindrical beryllium wire is considered. The results of analytical approximation and zero‐order iteration coincide with exact values of the amplitude complex transmission coefficient of the object as predicted by the resolution limit of the scheme, except near the edges of the object. Calculations of the first‐ and second‐order iterations improve the result at the edges of the object. This method can be applied for determination of the complex amplitude transmission coefficient of amplitude as well as phase objects. It can be used in X‐ray microscopy.     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级...     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级干扰,提高重建像质量,一种方法利用空间光调制器相移技术在参考光中加入一次任意相移,记录两幅数字全息图,消除重建零级像|另一种方法使用“无干扰全息图”消除重建零级像及共轭像.本文讨论结果可为大物体彩色数字全息及多波长数字全息检测应用提供有益的参考.     

余弦二值编码纯相位全息图的数字微镜器件显示

分析了采用错误减算法的迭代过程,在已知物波函数傅里叶谱的振幅和物波函数振幅的情况下恢复出纯相位的物波函数,最大限度地保留物波的振幅及相位信息.提出采用余弦二值编码生成二值全息图,即全息图的透射率函数取0或1.二值全息图通过数字微镜器件全息显示系统进行了重构显示,重构效果很好.理论分析了数字微镜器件的衍射效率,表明其最大衍射效率仅和微镜之间的间隔尺寸与微镜边长之比有关.余弦二值编码方法从理论上消除了零级衍射,可以制作像素较多的全息图.     

彩色全息图的计算机产生和数字再现

提出了一种基于色彩合成以及菲涅尔衍射原理,用计算机产生全息图并用数字方法再现彩色全息图的方法。该方法的第一步是将物体的彩色RGB图像分离为三基色强度图,再利用博奇编码的方法制成修正离轴参考光分色计算机全息图;第二步是分别对分色全息图在频域进行调制以实现用原参考光真实再现原始物光波。通过滤波消除零级衍射及共轭像的影响,获得了所需要的实像并提高了像质。提供的实验是选用一幅RGB图像作为原始物体,给出了用博奇编码法制成的全息图以及最后经色彩合成获得的再现像。结果表明,该方法能使各分色全息图的再现像准确重合,解决了在色彩合成时容易出现的色串扰问题。     

基于液晶空间光调制器的全息显示

在传统的纯相位全息显示系统中, 一般基于快速傅里叶变换(FFT)算法来计算相位全息图, 在FFT的计算中需要遵循Nyquist采样定理, 因此, 重建图像的尺寸往往受限于空间光调制器的固定采样率. 这个限制可以通过卷积算法或者两步菲涅耳衍射算法来解决, 但是需要使用多个FFT的计算, 导致计算量增大. 鉴于此, 提出了一种基于透镜的纯相位全息图计算方法. 在全息图的计算中, 通过透镜的成像原理建立一个采样率可变的虚拟全息面, 通过调节相应的距离参数使得在全息图的计算中可以任意调节原始图像的采样率, 摆脱了传统方法中液晶空间光调制器带宽积对重建图像尺寸的限制, 并且这种算法只需使用一次FFT就能达到变采样率的衍射计算, 大幅提高了全息图的计算速度. 数值模拟及光学实验结果证明了此方法可以在全息显示光学系统中清晰地重建不同尺寸的图像. 同时该系统可以有效地消除由空间光调制器的像素化结构带来的零级衍射.     

全息立体多重像的拍摄

本文介绍了用光栅对参考光进行调制,从而拍得全息立体多重像的方法。     

复数滤波器在数字全息图处理中的应用

数字全息图在微电路检测、粒度分析、透明场测量等小孔径、小视场对象测量和细胞观测等显微测量方面有着广泛的应用前景。根据离轴数字全息图的频谱特点,提出采用复数滤波器,利用计算机及相关算法对离轴数字全息图进行滤波,消除其零级及共轭像,同时可以得到全息图的相位分布。讨论了复数滤波器的设计方法,给出了实验结果。为数字全息图的压缩、再现和相息图制作提供了方便。     

Recycling of undiffracted laser light for reconstruction of holograms

When a laser source is used to illuminate a transmission hologram, the zero order beam is not utilised and is just wasted. The paper describes a new technique for economical utilisation of laser light by recycling the transmitted light to reconstruct a number of holograms simultaneously for viewing by a large number of observers. There is no danger to viewer who is exposed to the undiffracted laser beams transmitted through the hologram. The paper also discusses the diffraction efficiency requirement of successive hologram and the limit of number of holograms in the scheme.     

计算机制彩虹全息图的新算法

提出利用查表方法进行数字彩虹全息的计算方法.根据彩虹全息的基元全息图为线全息图的特点,找出物点与其线全息图的一一对应关系,建立空间点阵物点的线全息物光分布数据表.在对实际物体进行计算时,根据物点的位置,在数据表中找到与之对应的物光分布,并将这些分布进行叠加,从而形成实际物体被狭缝限制的物光分布,最后引入参考光计算其彩虹全息图.本方法充分利用了线全息图的性质,使得计算量大大减小,同时提高了计算速度.     

数字全息中的一些基本问题分析

利用全息理论、傅里叶频谱分析和采样定理，在模拟和数字全息光栅实验基础上，分析了数字全息记录和再现中的一些基本问题。结果表明：在物体和CCD尺寸确定的情况下，记录光路结构参量只取决于对图像采样的要求及CCD的像素尺寸，只要物体到CCD的距离满足采样要求，数字全息图再现光场的三个部分就可以分离；用准直平行光作为记录参考光和模拟再现光，可以得到与物体大小和形状完全一致的再现像；采样条件对再现像的影响大于分离条件，减小参物光的夹角记录适当过采样的数字全息图，有利于提高再现像的质量；另外，在获得高质量再现像方面，根据物体的具体特征，尽可能记录高质量的数字全息图，与满足采样条件和分离条件具有同样重要的意义。     

单波长编码计算机制彩色彩虹全息图的研究

提出计算机制三维物体彩色全息图的新方法.通过理论分析表明,在满足一定的条件下,三个不同原色的点光源所产生的全息图光栅结构和距全息图不同距离的三个同色物点的光产生的全息图光栅结构是等价的.根据这一原理并参照彩虹全息技术,研究了物体三原色信息光分布的编码方法和全息图的算法,用单波长计算实现彩色全息图的制作,同时,较为完满地解决了全息图叠加和色串扰问题.实验结果证明了该方法的可行性及有效性.     

基于螺旋相位调制的非相干全息点扩散函数研究

分析了菲涅耳非相干相关全息(Fresnel incoherent correlation holography,FINCH)系统中纯相位空间光调制器(spatial light modulator,SLM)加载螺旋相位掩模时的点扩散函数.以氙灯为照明光源搭建了FINCH系统,电荷耦合器记录的点源全息图与点扩散函数模拟结果一致.采用该系统分别在SLM上加载双透镜掩模和螺旋相位调制双透镜掩模两种情况下对分辨率板和非染色洋葱细胞成像,给出了成像对比结果.结果表明:采用螺旋相位调制的FINCH系统可以在几乎不牺牲分辨率的情况下提高图像的边缘对比度;同样,对相位物体也可以实现图像的边缘提取和识别.该方法在实时监测活细胞的分裂、形变等方面具有重要应用前景.     

Fresnel hologram reconstruction of complex three-dimensional object based on compressive sensing

Reconstruction the computer generated Fresnel hologram of complex 3D object based on compressive sensing （CS） is presented. The hologram is synthesized from a color image and the depth map of the 3D object. With the depth map, the intensity of the color image can be divided into multiple slices, which satisfy the condition of the sparsity of CS. Thus, the hologram can be reconstructed at different distances with corresponding scene focused using the CS method. The quality of the recovered images can be greatly improved compared with that from the back-propagation method. What＇s more, with the sub-sampled hologram, the image can be ideally reconstructed by the CS method, which can reduce the data-rate for transmission or storage.     

Holographic recording with a spatially incoherent imagery process

The method described consists of using the transfer properties of a classical imaging system in order to record a hologram of a two on three dimensional object. The object is illuminated by a spatially incoherent beam coming from a white light source through a holographic transparency.     

Enhancement on the generation of sampled phase-only holograms

Past research has demonstrated that if the intensity image of an object is uniformly down-sampled and converted into a Fresnel hologram, the phase component alone will be sufficient to reconstruct the source image. However,due to down-sampling, the edge and line patterns are degraded heavily. In this Letter, we propose an enhancement on the parent method by incorporating an adaptive down-sampling lattice. A hologram generated with our proposed method, which is referred to as the edge-enhanced sampled phase-only hologram, preserves favorable visual quality on both the shaded regions as well as the edge patterns of the object image.     

Recording Fractional Fourier Transform Hologram Using Holographic Zone Plate

FRTH(fractional Fourier transform hologram) is a new kind of hologram that differs from common Fresnel holograms and Fourier transform holograms. Due to the flexibility of zone plate. A method that uses the -1 order diffraction wave of zone plate as the object wave and the 0 order diffraction wave as the reference wave to record FRTH is presented. It provides a new simple way to record FRTH. In this paper, the theory of achieving FRT and recording FRTH using holographic zone plate is presented and experimental results are given.