Isotope dilution analysis in the micro and submicro range by double-labelling and precipitation on paper

A new variation of isotope dilution analysis based on double labelling and carried out on filter paper is described. The determination of microgram and submicrogram amounts of silver (labelled with (110m)Ag) by precipitation with iodide (labelled with (131)I) and of calcium (labelled with (45)Ca) by precipitation with phosphate (labelled with (32)P) are given as examples. In the first example the two radio-elements ((110m)Ag and (131)I) are measured by gamma-spectrometry, in the second one ((45)Ca and(32)P) by a beta-absorption method. A number of results show the usefulness of the method.     

First palladium(II) and platinum(II) complexes from employment of 2,6-diacetylpyridine dioxime: synthesis, structural and spectroscopic characterization, and biological evaluation

Employment of the monoanion of 2,6-diacetylpyridine dioxime (dapdoH(2)) as a tridentate chelate in palladium(II) and platinum(II) chemistry is reported. The syntheses, crystal structures, spectroscopic and physicochemical characterization, and biological evaluation are described of [PdCl(dapdoH)] (1) and [PtCl(dapdoH)] (2). Reaction of PdCl(2) with 2 equivs of dapdoH(2) in MeOH under reflux gave 1, whereas the same reaction with PtCl(2) in place of PdCl(2) gave 2 in comparable yields (70-80%). The divalent metal center in both compounds is coordinated by a terminal chloro group and a N,N',N"-tridentate chelating (η(3)) dapdoH(-) ligand. Thus, each metal ion is four coordinate with a distorted square planar geometry. Characterization of both complexes with (1)H and (13)C NMR and UV-vis and electrospray ionization mass spectroscopies confirmed their integrity in DMSO solutions. Interaction of the complexes with human and bovine serum albumin has been studied with fluorescence spectroscopy, revealing their affinity for these proteins with relatively high values of binding constants. UV study of the interaction of the complexes with calf-thymus DNA (CT DNA) has shown that they can bind to CT DNA, and the corresponding DNA binding constants have been evaluated. Cyclic voltammograms of the complexes in the presence of CT DNA solution have shown that the interaction of the complexes with CT DNA is mainly through intercalation, which has been also shown by DNA solution viscosity measurements. Competitive studies with ethidium bromide (EB) have revealed the ability of the complexes to displace the DNA-bound EB, suggesting competition with EB. The combined work demonstrates the ability of pyridyl-dioxime chelates not only to lead to polynuclear 3d-metal complexes with impressive structural motifs and interesting magnetic properties but also to yield new, mononuclear 4d- and 5d-metal complexes with biological implications.     

Some Cyclization Reactions with 1,3-Diphenyl-5-Imino-2-Imidazolidinone-4-Thione

1,3-Diphenyl-5-imino-2-imidazolidinone-4-thione (II) was treated with diazomethanes to give (III-V). Interaction of (II) with amino compounds furnished the corresponding 4-substituted imino derivatives (VIa-m). Imidazoquinoxaline derivatives (VIIIb, c) were obtained through interaction of (II) with o-phenylenediamines. Condensation of (II) with hydrazines afforded the hydrazones (IX, Xa, b). Semicarbazone and thiosemicarbazone derivatives (XIIa-d) were prepared from the reaction of (IX) with isocyanates and isothiocyanates. Again (II) was allowed to react with n-butylmagnesium bromide and HgCl₂ to give (XIII) and (XIV) respectively.     

Transfer of amido groups from isolated rhodium(I) amides to alkenes and vinylarenes

The reaction of monomeric and dimeric rhodium(I) amido complexes with unactivated olefins to generate imines is reported. Transamination of {(PEt(3))(2)RhN(SiMePh(2))(2)} (1a) or its -N(SiMe(3))(2) analogue 1b with p-toluidine gave the dimeric [(PEt(3))(2)Rh(mu-NHAr)](2) (Ar = p-tolyl) (2a) in 80% isolated yield. Reaction of 2a with PEt(3) generated the monomeric (PEt(3))(3)Rh(NHAr) (Ar = p-tolyl) (3a). PEt(3)-ligated arylamides 2a and 3a reacted with styrene to transfer the amido group to the olefin and to form the ketimine Ph(Me)C=N(p-tol) (4a) in 48-95% yields. The dinuclear amido hydride (PEt(3))(4)Rh(2)(mu-NHAr)(mu-H) (Ar = p-tolyl) (5a) was formed from reaction of 2a in 95% yield, and a mixture of this dimeric species and the (PEt(3))(n)RhH complexes with n = 3 and 4 was formed from reaction of 3a in a combined 75% yield. Propene reacted with 2a to give Me(2)C=N(p-tol) (4b) and 5a in 90 and 57% yields. Propene also reacted with 3a to give 4b and 5a in 65 and 94% yields. Analogues of 2a and 3a with varied electronic properties also reacted with styrene to form the corresponding imines, and moderately faster rates were observed for reactions of electron-rich arylamides. Kinetic studies of the reaction of 3a with styrene were most consistent with formation of the imine by migratory insertion of olefin into the rhodium-amide bond to generate an aminoalkyl intermediate that undergoes beta-hydrogen elimination to generate a rhodium hydride and an enamine that tautomerizes to the imine.     

Sigma-borane complexes of iridium: synthesis and structural characterization

Reaction of NaBH4 with (tBuPOCOP)IrHCl affords the previously reported complex (tBuPOCOP)IrH2(BH3) (1) (tBuPOCOP = kappa(3)-C6H3-1,3-[OP(tBu)2]2). The structure of 1 determined from neutron diffraction data contains a B-H sigma-bond to iridium with an elongated B-H bond distance of 1.45(5) A. Compound 1 crystallizes in the space group P1 (Z = 2) with a = 8.262 (5) A, b = 12.264 (5) A, c = 13.394 (4) A, and V = 1256.2 (1) A(3) (30 K). Complex 1 can also be prepared by reaction of BH3 x THF with (tBuPOCOP)IrH2. Reaction of (tBuPOCOP)IrH2 with pinacol borane gave initially complex 2, which is assigned a structure analogous to that of 1 based on spectroscopic measurements. Complex 2 evolves H2 at room temperature leading to the borane complex 3, which is formed cleanly when 2 is subjected to dynamic vacuum. The structure of 3 has been determined by X-ray diffraction and consists of the (tBuPOCOP)Ir core with a sigma-bound pinacol borane ligand in an approximately square planar complex. Compound 3 crystallizes in the space group C2/c (Z = 4) with a = 41.2238 (2) A, b = 11.1233 (2) A, c = 14.6122 (3) A, and V = 6700.21 (19) A(3) (130 K). Reaction of (tBuPOCOP)IrH2 with 9-borobicyclononane (9-BBN) affords complex 4. Complex 4 displays (1)H NMR resonances analogous to 1 and exists in equilibrium with (tBuPOCOP)IrH2 in THF solutions.     

Chelate bis(imino)pyridine cobalt complexes: synthesis, reduction, and evidence for the generation of ethene polymerization catalysts by Li+ cation activation

Treatment of the bis(iminobenzyl)pyridine chelate Schiff-base ligand 8 (ligPh) with FeCl2 or CoCl2 yielded the corresponding (ligPh)MCl2 complexes 9 (Fe) and 10 (Co). The reaction of 10 with methyllithium or "butadiene-magnesium" resulted in reduction to give the corresponding (ligPh)Co(I)Cl product 11. Similarly, the bis(aryliminoethyl)pyridine ligand (ligMe) was reacted with CoCl2 to yield (ligMe)CoCl2 (12). Reduction to (ligMe)CoCl (13) was effected by treatment with "butadiene-magnesium". Complex 13 reacted with Li[B(C6F5)4] in toluene followed by treatment with pyridine to yield [(ligMe)Co+-pyridine] (15). The reaction of the Co(II) complexes 10 or 12 with ca. 3 molar equiv of methyllithium gave the cobalt(I) complexes 16 and 17, respectively. Treatment of the (ligMe)CoCH3 (17) with Li[B(C6F5)4] gave a low activity ethene polymerization catalyst. Likewise, complex 16 produced polyethylene (activity = 33 g(PE) mmol(cat)(-1) h(-1) bar(-1) at room temperature) upon treatment with a stoichiometric amount of Li[B(C6F5)4]. A third ligand (lig(OMe)) was synthesized featuring methoxy groups in the ligand backbone (22). Coordination to FeCl2 and CoCl2 yielded the desired compounds 23 and 24. Reaction with MeLi gave (ligOMe)CoMe (25/26). Treatment of 25/26 with excess B(C6F5)3 gave the eta6-arene cation complex 27, where one Co-N linkage was cleaved. Activation of 25/26 with Li[B(C6F5)4] again gave a catalytically active species.     

Spectrophotometric determination of traces of iron, copper, zinc, aluminium and bismuth in lead- and tin-base solders and white-metal bearing alloys

Serious co-precipitation ( > 60%) of traces of tervalent metal ions has been found to occur in the precipitation of PbSO(4). A moderate amount (approximately 11%) of Zn(2+) and an insignificant amount of Cu(2+) are also co-precipitated. To deal with this problem, for the determination of Fe (with 1,10-phenanthroline), Al (with oxine-EDTA-KCN), Bi (with diethyldithiocarbamate-EDTA-KCN), and Cu (with 2,2'-biquinoline) in lead- and tin-base solders or white-metal bearing alloys, the PbSO(4) is dissolved in tartrate solution. Zinc is determined with dithizone after the PbSO(4) has been thoroughly washed with a dilute ammonia solution.     

A synthesis of lumazine derivatives

Treatment of 6-amino-1,3-dimethyl-5-nitrosouracil (Ia) with dimethyl acetylenedicarboxylate (DMAD) in dimethylformamide (DMF) afforded 6,7-bis(dimethoxycarbonyl)-1,3-dimethyllumazine (II). Similarly, the reaction of 6-amino-1,3-dimethyl-5-phenylazouracil with DMAD gave also II. Hydrolysis of II with hydrochloric acid gave 1,3-dimethyllumazine-6-carboxylic acid (III). III was chlorinated with thionyl chloride and then aminated with ethanolic ammonia to give rise to 6-carbamoyl-1,3-dimethyllumazine (V). V was alternatively synthesized by the treatment of Ia with propiolamide in DMF.     

Kinetic study of the aminolysis and pyridinolysis of O-phenyl and O-ethyl O-(2,4-dinitrophenyl) thiocarbonates. A remarkable leaving group effect

The reactions of a series of secondary alicyclic (SA) amines with O-phenyl and O-ethyl O-(2,4-dinitrophenyl) thiocarbonates (1 and 2, respectively) and of a series of pyridines with the former substrate are subjected to a kinetic investigation in water, at 25.0 degrees C, ionic strength 0.2 M (KCl). Under amine excess over the substrate, all the reactions obey pseudo-first-order kinetics and are first-order in amine. The Br?nsted-type plots are biphasic, with slopes (at high pK(a)) of beta(1) = 0.20 for the reactions of SA amines with 1 and 2 and beta(1) = 0.10 for the pyridinolysis of 1 and with slopes (at low pK(a)) of beta(2) = 0.80 for the reactions of SA amines with 1 and 2 and beta(2) = 1.0 for the pyridinolysis of 1. The pK(a) values at the curvature center (pK(a)(0)) are 7.7, 7.0, and 7.0, respectively. These results are consistent with the existence of a zwitterionic tetrahedral intermediate (T++) and a change in the rate-determining step with the variation of amine basicity. The larger pK(a)(0) value for the pyridinolysis of 1 compared to that for 2 (pK(a)(0) = 6.8) and the larger pK(a)(0) value for the reactions of SA amines with 1 relative to 2 are explained by the greater inductive electron withdrawal of PhO compared to EtO. The larger pK(a)(0) values for the reactions of SA amines with 1 and 2, relative to their corresponding pyridinolysis, are attributed to the greater nucleofugalities of SA amines compared to isobasic pyridines. The smaller pK(a)(0) value for the reactions of SA amines with 2 than with O-ethyl S-(2,4-dinitrophenyl) dithiocarbonate (pK(a)(0) = 9.2) is explained by the greater nucleofugality from T(++) of 2,4-dinitrophenoxide (DNPO(-)) relative to the thio derivative. The stepwise reactions of SA amines with 1 and 2, in contrast to the concerted mechanisms for the reactions of the same amines with the corresponding carbonates, is attributed to stabilization of T(++) by the change of O(-) to S(-). The simple mechanism for the SA aminolysis of 2 (only one tetrahedral intermediate, T(++)) is in contrast to the more complex mechanism (two tetrahedral intermediates, T(++) and T(-), the latter formed by deprotonation of T(++) by the amine) for the same aminolysis of the analogous thionocarbonate with 4-nitrophenoxide (NPO(-)) as nucleofuge. To our knowledge, this is the first example of a remarkable change in the decomposition path of a tetrahedral intermediate T by replacement of NPO(-) with DNPO(-) as the leaving group of the substrate. This is explained by (i) the greater leaving ability from T(++) of DNPO(-) than NPO(-) and (ii) the similar rates of deprotonation of both T(++) (formed with DNPO and NPO).     

Alkyl 2,2,2-Trifluoroethanesulfonates (Tresylates): Elimination-Addition vs Bimolecular Nucleophilic Substitution in Reactions with Nucleophiles in Aqueous Media(1)

Alkyl 2,2,2-trifluoroethanesulfonate esters (tresylates), ROSO(2)CH(2)CF(3), react with aqueous base (pH >/= 9) to give the (alkoxysulfonyl)acetic acid, ROSO(2)CH(2)COOH; with the further addition of either a primary or secondary amine or of an alkanethiol, the product is the either the corresponding amide, ROSO(2)CH(2)C(O)NR(1)R(2), or a mixture in which the ketene dithioacetal, ROSO(2)CH=C(SR(1))(2), or the thioorthoester, ROSO(2)CH(2)C(SR(1))(3), may predominate. Kinetic and product studies are consistent with the following: (a) the reaction of tresylates with water is the normal sulfonic ester hydrolysis and (b) reaction with hydroxide is an (E1cB)(rev) process with loss of HF to yield the alkyl 2,2-difluoroethenesulfonate, ROSO(2)CH=CF(2), which rapidly yields the observed products. Benzyl 2,2,2-trifluoroethyl sulfone reacts analogously. The relationship between these observation with small molecules and those of earlier workers with tresyl agarose is discussed.     

Determination of uranium, iron, copper, and nickel from ore samples by MEKC using N,N'-ethylene bis(salicylaldimine) as complexing reagent

An analytical procedure has been developed for the separation of dioxouranium(VI), iron(III), copper(II), nickel(II), cobalt(II), cobalt(III), palladium(II), and thorium(IV) by MEKC using N,N'-ethylene bis(salicylaldimine) (H(2)SA(2)en) as a complexing reagent with total runtime <4.5 min. SDS was used as micellar medium at pH 8 with sodium tetraborate buffer (0.1 M). An uncoated fused-silica capillary with an effective length of 50 cm x 75 microm id was used with an applied voltage of 30 kV with photodiode array detection at 231 nm. Linear calibrations were obtained within 0.111-1000 microg/mL of each element with LODs within 37-325 ng/mL. The developed method was tested for analysis of uranium ore samples indicating its presence within 103-1789 microg/g with RSD within 0.79-1.87%. Likewise copper, nickel, and iron in their combined matrix were also simultaneously determined with RSD 0.4-1.6% (n = 6).     

Coordination "oligomers" in self-assembly reactions of some "tritopic" picolinic dihydrazone ligands-mononuclear, dinuclear, hexanuclear, heptanuclear, and nonanuclear examples

"Tritopic" picolinic dihydrazone ligands with tridentate coordination pockets are designed to produce homoleptic [3 x 3] nonanuclear square grid complexes on reaction with transition-metal salts, and many structurally documented examples have been obtained with Mn(II), Cu(II), and Zn(II) ions. However, other oligomeric complexes with smaller nuclearities have also been discovered and identified structurally in some reactions involving Fe(II), Co(II), Ni(II), and Cu(II), with certain tritopic ligands. This illustrates the dynamic nature of the metal-ligand interaction and the conformationally flexible nature of the ligands and points to the possible involvement of some of these species as intermediates in the [3 x 3] grid formation process. Examples of mononuclear, dinuclear, hexanuclear, heptanuclear, and nonanuclear species involving Fe(II), Co(II), Ni(II), and Cu(II) salts with a series of potentially heptadentate picolinic dihydrazone ligands with pyrazine, pyrimidine, and pyridine end groups are described in the present study. Iron and cobalt complexation reactions are complicated by redox processes, which lead to mixed-oxidation-state Co(II)/Co(III) systems when starting with Co(II) salts, and reduction of Fe(III) to Fe(II) when starting with Fe(III). Magnetic exchange within the polynuclear structural frameworks is discussed and related to the structural features.     

Correlation of infrared spectra of zinc(II) carboxylates with their structures

The correlation of the infrared spectra of zinc(II) carboxylates with their structures was investigated in the paper. The complexes with different modes of the carboxylate binding, from chelating, through bridging (syn-syn, syn-anti, monatomic), ionic to monodentate were used for the study, namely [Zn(C6H5CHCHCOO)2(H2O)2] (I) with chelating carboxylate group (C6H5CHCHCOO=cinnamate), [Zn2(C6H5COO)4(pap)2] (II) with syn-syn bridging carboxylate (C6H5COO=benzoate; pap=papaverine), [Zn(C6H5CHCHCOO)2(mpcm)]n (III) with syn-anti carboxylate bridge (mpcm=methyl-3-pyridylcarbamate), [Zn(C5H4NCOO)2(H2O)4] (IV) with ionic carboxylate group (C5H4NCOO=nicotinate), [Zn(C6H5COO)2(pcb)2]n (V) with monodentate carboxylate coordination (pcb=3-pyridylcarbinol) and [Zn3(C6H5COO)6(nia)2] (VI) with syn-syn and monatomic carboxylate bridges (nia=nicotinamide). First, the mode of the carboxylate binding was assigned from the infrared spectra using the magnitude of the separation between the carboxylate stretches, Deltaexp=nuas(COO-)-nus(COO-). Then the values Deltaexp were compared with those calculated from structural data of the carboxylate anion (Deltacalc). The conclusions about the carboxylate binding which resulted from the Delta values, were confronted with the crystal structure of the complexes. The limitations and recommendations were formulated to assign the mode of the carboxylate binding from the infrared spectra. The dependence of the Deltaexp values on the magnitudes of Zn-O-C angles in bidentate carboxylate coordination was observed.     

The "missing link": the gas-phase generation of platinum-methylidyne clusters Pt(n)CH+ (n=1, 2) and their reactions with hydrocarbons and ammonia

Electrospray ionization (ESI) of tetrameric platinum(II) acetate, [Pt(4)(CH(3)COO)(8)], in methanol generates the formal platinum(III) dimeric cation [Pt(2)(CH(3)COO)(3)(CH(2)COO)(MeOH)(2)](+), which, upon harsher ionization conditions, sequentially loses the two methanol ligands, CO(2), and CH(2)COO to form the platinum(II) dimer [Pt(2)(CH(3)COO)(2)(CH(3))](+). Next, intramolecular sequential double hydrogen-atom transfer from the methyl group concomitant with the elimination of two acetic acid molecules produces Pt(2)CH(+) from which, upon even harsher conditions, PtCH(+) is eventually generated. This degradation sequence is supported by collision-induced dissociation (CID) experiments, extensive isotope-labeling studies, and DFT calculations. Both PtCH(+) and Pt(2)CH(+) react under thermal conditions with the hydrocarbons C(2)H(n) (n=2, 4, 6) and C(3)H(n) (n=6, 8). While, in ion-molecule reactions of PtCH(+) with C(2) hydrocarbons, the relative rates decrease with increasing n, the opposite trend holds true for Pt(2)CH(+). The Pt(2)CH(+) cluster only sluggishly reacts with C(2)H(2), but with C(2)H(4) and C(2)H(6) dihydrogen loss dominates. The reactions with the latter two substrates were preceded by a complete exchange of all of the hydrogen atoms present in the adduct complex. The PtCH(+) ion is much less selective. In the reactions with C(2)H(2) and C(2)H(4), elimination of H(2) occurs; however, CH(4) formation prevails in the decomposition of the adduct complex that is formed with C(2)H(6). In the reaction with C(2)H(2), in addition to H(2) loss, C(3)H(3)(+) is produced, and this process formally corresponds to the transfer of the cationic methylidyne unit CH(+) to C(2)H(2), accompanied by the release of neutral Pt. In the ion-molecule reactions with the C(3) hydrocarbons C(3)H(6) and C(3)H(8), dihydrogen loss occurs with high selectivity for Pt(2)CH(+), but in the reactions of these substrates with PtCH(+) several reaction routes compete. Finally, in the ion-molecule reactions with ammonia, both platinum complexes give rise to proton transfer to produce NH(4)(+); however, only the encounter complex generated with PtCH(+) undergoes efficient dehydrogenation of the substrate, and the rather minor formation of CNH(4)(+) indicates that C-N bond coupling is inefficient.     

Synthesis, reactions and antimicrobial activities of 8-ethoxycoumarin derivatives

Condensation of 3-acetyl-8-ethoxycoumarin (3) with thiosemicarbazide gave ethylidenehydrazinecarbothioamide 5, which was transformed into the thiazolidin-4-one derivatives 6,7. Interaction of 3 with DMF/POCl(3) gave b-chloroacroline derivative 8. Treatment of 3 with malononitrile gave benzo[c]chromone and 2-aminobenzonitrile derivatives 9 and 10, respectively with respect to the reaction conditions. Condensation of 3-(2-bromoacetyl)-8-ethoxycoumarin (4) with o-phenylenediamine gave 3-(quioxaline-2-yl)-8-ethoxycoumarin hydrobromide (11), while 4 reacted with 2-aminopyridine to give chromenopyridopyrimidine derivative 12. Condensation of 4 with potassium thio-cyanate/methanol gave an unexpected derivative, 2H-chromeno-3-carboxy(methyl-carbonimidic)thioanhydride 16, which upon treatment with (NH(2))(2)·H(2)O gave 3-ethoxy-2-hydroxybenzaldehyde azine 19. Interaction of 4 with thiourea derivatives gave thiazole derivatives 20a-c. The structures of the newly synthesized compounds were confirmed by their spectra data. The newly synthesized compounds were also screened for their antimicrobial activity.     

Conformation of 2-aminomethylpyrrolidine and 2-aminomethylpiperidine in ternary platinum(II) complexes: regulation of conformation of the diamine by the coexisting ligand

Square-planar complexes with the formula [Pt(L(2))(L(1))](X)(2) x nH(2)O, where L(1) is S-2-aminomethylpyrrolidine (S-pyrda) or 2-aminomethylpiperidine (pipda) and L(2) is diammine (X=Cl), cyclobutane-1,1-dicarboxylato (cbdca) (X=none), 2,2'-bipyridine (bpy) (X=NO(3)), or 1,10-phenanthroline (phen) (X=Cl), were prepared and the nature of the coordination of L(1) was examined by (1)H-NMR spectroscopy and X-ray crystallography. These 2-aminomethylazacycloalkane derivatives form five-membered chelate rings condensed with an azacycloalkane ring in cis- or trans-configurations. The (1)H-NMR spectrum of complexes with S-pyrda as L(1) were consistent with cis-condensed rings in an S(N) conformation with any of L(2) group. However, (1)H-NMR spectra of the complexes with pipda as L(1) indicated trans-fused successive rings for the diammine and cbdca as L(2), but spectra for bpy and phen as L(2) were consistent with a conformation having cis-fused successive rings. X-Ray crystallography data for the two complexes with pipda as L(1) and cbdca (1) and bpy (2) as L(2) confirms the different coordination behavior in the solid state.     

2-取代的6-溴甲基-4(3H)-喹唑啉酮的合成

2-取代的6-溴甲基-4(3H)-喹唑啉酮的合成;4(3H)-喹唑啉酮;苯并噁嗪酮;N-溴代琥珀酰亚胺; 合成     

Characterization of an NH-pi interaction in Co(III) ternary complexes with aromatic amino acids

The NH-pi interaction has been detected in the crystal structures of Co(III) ternary complexes with N,N-bis(carboxymethyl)-(S)-phenylalanine (BCMPA) and aromatic amino acids including (S)-phenylalanine ((S)-Phe), (R)-phenylalanine ((R)-Phe), and (S)-tryptophan ((S)-Trp)). Additionally, this interaction has been studied in solution for Co(III) ternary complexes with BCMPA or NTA (NTA = nitrilotriacetic acid) and several amino acids (AA) by means of electronic absorption, circular dichroism (CD), and (1)H NMR spectroscopies. The CD intensities of the Co(III) complexes with aromatic amino acids measured in the d-d region ( approximately 20.5 x 10(3) cm(-)(1)) are significantly decreased in ethanol solutions relative to water. Analogous complexes with aliphatic amino acids do not exhibit this solvent effect. The (1)H NMR spectra of the Co(III) complexes with aromatic amino acids measured in DMSO-d(6) exhibit upfield shifts of the NH peaks compared with those with aliphatic amino acids, which suggest a shielding effect due to the aromaticity. The upshift values coincide with those experimentally evaluated from the crystal structures. The magnitude of the upfield shifts agrees well with Hammett's rule, indicating that the increase of pi-electron densities on the aromatic rings leads attractive NH-pi interaction that exerts a larger shielding effect for the NH protons. In ligand-substitution reactions of the carbonatocobalt(III) complexes with amino acids, the yields of those with aromatic amino acids are higher than the yields obtained for complexes with aliphatic amino acids. This observation is discussed in connection with the important contribution of the NH-pi interaction as one of the promotion factors in the reaction.     

Kinetics and mechanism of the aminolysis of methyl 4-nitrophenyl,methyl 2,4-dinitrophenyl,and phenyl 2,4-dinitrophenyl carbonates

The reactions of methyl 4-nitrophenyl carbonate (MNPC) with a series of secondary alicyclic amines (SAA) and quinuclidines (QUIN), methyl 2,4-dinitrophenyl carbonate (MDNPC) with QUIN and 1-(2-hydroxyethyl)piperazinium ion (HPA), and phenyl 2,4-dinitrophenyl carbonate (PDNPC) with SAA are subjected to a kinetic investigation in aqueous solution, at 25.0 degrees C and an ionic strength of 0.2 M. By following spectrophotometrically the nucleofuge release (330-400 nm) under amine excess, pseudo-first-order rate coefficients (k(obsd)) are obtained. Plots of k(obsd) vs [amine] at constant pH are linear, with the slope (k(N)) being pH independent. The Br?nsted-type plot (log k(N) vs amine pK(a)) for the reactions of SAA with MNPC is biphasic with slopes beta(1) = 0.3 (high pK(a) region) and beta(2) = 1.0 (low pK(a) region) and a curvature center at pK(a)(0) = 9.3. This plot is consistent with a stepwise mechanism through a zwitterionic tetrahedral intermediate (T(+/-)) and a change in the rate-determining step with SAA basicity. The Br?nsted plot for the quinuclidinolysis of MNPC is linear with slope beta(N) = 0.86, in line with a stepwise process where breakdown of T(+/-) to products is rate limiting. A previous work on the reactions of SAA with MDNPC was revised by including the reaction of HPA. The Br?nsted plots for the reactions of QUIN and SAA with MDNPC and SAA with PDNPC are linear with slopes beta = 0.51, 0.48, and 0.39, respectively, consistent with concerted mechanisms. Since quinuclidines are better leaving groups from T(+/-) than isobasic SAA, yielding a less stable T(+/-), it seems doubtful that the quinuclidinolysis of PDNPC is stepwise, as reported.     

Cross-diffusion in a water-in-oil microemulsion loaded with malonic acid or ferroin. Taylor dispersion method for four-component systems

We describe an improved Taylor dispersion method for four-component systems, which we apply to measure the main- and cross-diffusion coefficients in an Aerosol OT water-in-oil microemulsion loaded with one of the reactants of the Belousov-Zhabotinsky (BZ) reaction, water(1)/AOT(2)/R(3)/octane(4) system, where R is malonic acid or ferroin. With [H(2)O]/[AOT] = 11.8 and volume droplet fraction phi d = 0.18, when the microemulsion is below the percolation transition, the cross-diffusion coefficients D(13) and D(23) are large and positive ( D(13)/ D(33) congruent with 14, D(23)/ D(33) congruent with 3) for malonic acid and large and negative for ferroin ( D(13)/ D(33) congruent with -112, D(23)/ D(33) congruent with -30) while coefficients D(31) and D(32) are small and negative for malonic acid ( D(31)/ D(33) congruent with -0.01, D(32)/ D(33) congruent with -0.14) and small and positive for ferroin ( D(31)/ D(33) congruent with 5 x 10(-4), D(32)/ D(33) congruent with 8 x 10(-3)). These data represent the first direct determination of cross-diffusion effects in a pattern-forming system and of the full matrix of diffusion coefficients for a four-component system. The results should provide a basis for modeling pattern formation in the BZ-AOT system.